thesis latex sample

because LaTeX matters

Writing a thesis in latex.

Writing a thesis is a time-intensive endeavor. Fortunately, using LaTeX, you can focus on the content rather than the formatting of your thesis. The following article summarizes the most important aspects of writing a thesis in LaTeX, providing you with a document skeleton (at the end) and lots of additional tips and tricks.

Document class

The first choice in most cases will be the report document class:

See here for a complete list of options. Personally, I use draft a lot. It replaces figures with a box of the size of the figure. It saves you time generating the document. Furthermore, it will highlight justification and hyphenation errors ( Overfull \hbox ).

Check with your college or university. They may have an official or unofficial template/class-file to be used for writing a thesis.

Again, follow the instructions of your institution if there are any. Otherwise, LaTeX provides a few basic command for the creation of a title page.

Use \today as \date argument to automatically generate the current date. Leave it empty in case you don’t want the date to be printed. As shown in the example, the author command can be extended to print several lines.

For a more sophisticated title page, the titlespages package has a nice collection of pre-formatted front pages. For different affiliations use the authblk package, see here for some examples.

Contents (toc/lof/lot)

Nothing special here.

The tocloft package offers great flexibility in formatting contents. See here for a selection of possibilities.

Often, the page numbers are changed to roman for this introductory part of the document and only later, for the actual content, arabic page numbering is used. This can be done by placing the following commands before and after the contents commands respectively.

LaTeX provides the abstract environment which will print “Abstract” centered as a title.

The actual content

The most important and extensive part is the content. I strongly suggest to split up every chapter into an individual file and load them in the main tex-file.

In thesis.tex:

In chapter1.tex:

This way, you can typeset single chapters or parts of the whole thesis only, by commenting out what you want to exclude. Remember, the document can only be generated from the main file (thesis.tex), since the individual chapters are missing a proper LaTeX document structure.

See here for a discussion on whether to use \input or \include .

Bibliography

The most convenient way is to use a bib-tex file that contains all your references. You can download bibtex items for articles, books, etc. from Google scholar or often directly from the journal websites.

Two packages are commonly used to personalize bibliographies, the newer biblatex and the natbib package, which has been around for many years. These packages offer great flexibility in customizing the look of a bibliography, depending on the preference in the field or the author.

Other commonly used packages

• graphicx : Indispensable when working with figures/graphs.
• subfig : Controlling arrangement of several figures (e.g. 2×2 matrix)
• minitoc : Adds mini table of contents to every chapter
• nomencl : Generate and format a nomenclature
• listings : Source code printer for LaTeX
• babel : Multilingual package for standard document classes
• fancyhdr : Controlling header and footer
• hyperref : Hypertext links for LaTeX
• And many more

Minimal example code

I’m aware that this short post on writing a thesis only covers the very basics of a vast topic. However, it will help you getting started and focussing on the content of your thesis rather than the formatting of the document.

Share this:

16 comments.

8. June 2012 at 7:09

I would rather recommend a documentclass like memoir or scrreprt (from KOMA-Script), since they are much more flexible than report.

8. June 2012 at 8:12

I agree, my experience with them is limited though. Thanks for the addendum. Here is the documentation: memoir , scrreprt (KOMA script)

8. June 2012 at 8:02

Nice post Tom. I’m actually writing a two-part (or three) on Writing the PhD thesis: the tools . Feel free to comment, I hope to update it as I write my thesis, so any suggestions are welcome.

8. June 2012 at 8:05

Thanks for the link. I just saw your post and thought I should really check out git sometimes :-). Best, Tom.

8. June 2012 at 8:10

Yes, git is awesome. It can be a bit overwhelming with all the options and commands, but if you’re just working alone, and probably on several machines, then you can do everything effortlessly with few commands.

11. June 2012 at 2:15

That’s what has kept me so far. But I’ll definitely give it a try. Thanks!

8. June 2012 at 8:08

What a great overview. Thank you, this will come handy… when I finally get myself to start writing that thesis 🙂

8. June 2012 at 14:12

Thanks and good luck with your thesis! Tom.

9. June 2012 at 4:08

Hi, I can recommend two important packages: lineno.sty to insert linenumbers (really helpful in the debugging phase) and todonotes (allows you to insert todo-notes for things you still have to do.)

11. June 2012 at 0:48

Thanks Uwe! I wrote an article on both, lineno and todonotes . Here is the documentation: lineno and todonotes for more details.

12. June 2012 at 15:51

Thanks for the post, i’m currently writing my master thesis 🙂

A small note: it seems that subfig is deprecated for the subcaption package: https://en.wikibooks.org/wiki/LaTeX/Floats,_Figures_and_Captions#Subfloats

12. June 2012 at 16:05

Hey, thanks for the tip. Too bad they don’t say anything in the documentation apart from the fact that the packages are not compatible.

1. August 2012 at 21:11

good thesis template can be also found here (free): http://enjobs.org/index.php/downloads2

including living headers, empty pages, two-sided with front and main matter as well as a complete structure

2. August 2012 at 11:03

Thanks for the link to the thesis template!

15. November 2012 at 22:21

Hi Tom, I’m writing a report on spanish in LaTex, using emacs, auctex, aspell (~170pags. ~70 files included by now) and this blog is my savior every time because I’m quite new with all these.

The question: Is there anyway (other than \- in every occurrence) to define the correct hyphenation for accented words (non english characters like é)? I have three o four accented words, about the subject of my report, that occur near 100 times each, across several files, and the \hyphenation{} command can’t handle these.

20. November 2012 at 3:47

I was wondering what packages you load in your preamble. For a better hyphenation (and easier typing), you should use these packages:

See here for more details.

If this doesn’t help, please provide a minimal working example to illustrate the problem.

Thanks, Tom.

Leave a Reply Cancel reply

Overleaf for Scholarly Writing & Publication: LaTeX Theses and Dissertations

• Reference Managers and Overleaf
• Adding Graphs, Tables, and Images
• Using Templates on Overleaf
• LaTeX Theses and Dissertations

LaTeX Theses and Dissertatons

Tips and tools for writing your LaTeX thesis or dissertation in  Overleaf, including templates, managing references , and getting started guides.

Managing References

BibTeX  is a file format used for lists of references for  LaTeX  documents. Many citation management tools support the ability to export and import lists of references in .bib format. Some reference management tools can generate  BibTeX  files of your library or folders for use in your  LaTeX  documents.

LaTeX on Wikibooks   has a  Bibliography Management  page.

Find list of BibTeX styles available on Overleaf   here

View a video tutorial on how to include a bibliography using BibTeX  here

Collaborate with Overleaf

Collaboration tools

Every project you create has a secret link. Just send it to your co-authors, and they can review, comment and edit. Overleaf synchronizes changes from all authors, so everyone always has the latest version. More advanced tools include protected projects and integration with Git.

Collaborate online and offline with Overleaf and Git

Protected projects with Overleaf Pro

Getting Started with Your Thesis or Dissertation

How to get started writing your thesis in LaTeX

Writing a thesis or dissertation in LaTeX can be challenging, but the end result is well worth it - nothing looks as good as a LaTeX-produced pdf, and for large documents it's a lot easier than fighting with formatting and cross-referencing in MS Word. Review this video from Overleaf to help you get started writing your thesis in LaTeX, using a standard thesis template from the  Overleaf Gallery .

You can  upload your own thesis template to the Overleaf Gallery   if your university provides a set of LaTeX template files or you may find your university's thesis template already in the Overleaf Gallery.

This video assumes you've used LaTeX before and are familiar with the standard commands (see our other  tutorial videos   if not), and focuses on how to work with a large project split over multiple files.

How to Write your Thesis/Dissertation in LaTeX: A Five-Part Guide

Five-Part LaTeX Thesis/Dissertation  Writing Guide

Part 1: Basic Structure   corresponding  video

Part 2: Page Layout   corresponding  video

Part 3: Figures, Subfigures and Tables   corresponding  video

Part 4: Bibliographies with Biblatex  corresponding  video

Part 5: Customizing Your Title Page and Abstract   corresponding  video

Link Your ORCID

Link yo ur  ORCiD  account  to your  Overleaf account  via the  ORCID @ CMU Portal

Open Knowledge Librarian

• << Previous: Using Templates on Overleaf
• Last Updated: Oct 4, 2023 9:31 AM
• URL: https://guides.library.cmu.edu/overleaf

The MIT thesis template in LaTeX

The latex template.

The current MIT thesis template was developed in 2023, using up-to-date LaTeX coding, to meet the current formatting requirements of the MIT Libraries. The title and abstract pages are automatically laid out from information provided by the user. This template includes options to use a variety of fonts, and it is compatible with either pdfTeX or unicode engines such as luaLaTeX. When using LaTeX formats dated November 2022 or later, the resulting pdf file meets the PDF/A-2b archivability standard. A standard TeX Live installation includes all other packages required by the template.

This template was written by John Lienhard at the request of the MIT Libraries.

• Documentation: Documentation for the template is available in pdf format here .
• Download: The most current LaTeX files for this template are distributed through the Comprehensive TeX Archive Network (CTAN): https://ctan.org/pkg/mitthesis Download
• Overleaf.com: A copy of the thesis template is also present in Overleaf.com's template gallery, here . Overleaf includes all the packages in TeX Live, so no additional downloads are needed. Learn more about Overleaf at MIT .

Specifications for MIT theses

The formatting requirements for MIT theses are set by the MIT Libraries, as described at this url: http://libraries.mit.edu/archives/thesis-specs/ . Questions regarding these specifications should be directed to [email protected] .

The original LaTeX 2.09 template was written by Stephen Gildea in the late 1980s (also in CTAN, here ). That template was edited by many later students, leading to the files archived here.

LaTeX has changed greatly since the original MIT thesis template was written. LaTeX 2.09 was replaced by LaTeX2e in 1994. New engines were developed, particularly pdfTeX during the 1990s and Unicode-aware engines in the decades that followed. Many packages and fonts were developed to accompany the original platform, particularly after 2000; and major updates to the LaTeX kernel began in 2018. Over the years, the MIT Libraries have changed the required format several times, especially as electronic thesis submission has become the norm. The original template served MIT well; but by the early 2020s, it was substantially out of date. That situation motivated the creation of this new template.

Overleaf for LaTeX Theses & Dissertations: Using Templates on Overleaf

• Using Templates on Overleaf
• Reference Managers and Overleaf
• Adding Tables, Images, and Graphs

Start your projects with quality LaTeX templates for journals, theses, dissertations, CVs, resumes, papers, presentations, posters, assignments, letters, project reports, and more.

Getting started

Start with Overleaf templates

Overleaf templates make it easy to get started with all types of projects - from papers and presentations to newsletters, CVs, and much more! It's also a great way to learn LaTeX and produce professional looking projects quickly.

Follow Us for More

New templates are added all the time. Follow us on Twitter for the highlights!

Find templates on Overleaf

Visit our thesis template gallery

Make your own templates on Overleaf

Upload or create templates for assignments, presentations, theses, posters, and student/faculty journals for your institution. Just create it as a project on Overleaf and use the publish menu.

Begin Your Work Using the Official 'University' Thesis Template on Overleaf

(If your University has an official thesis template published on Overleaf, you can customize this box accordingly with a link to the template)

Write your thesis using the official ' Name of University goes here ' thesis template

Find your University's template on Overleaf here ( insert link to official LaTeX thesis template on Overleaf Gallery or custom Overleaf institutional portal template page ).

• << Previous: Home
• Next: Reference Managers and Overleaf >>
• Last Updated: May 18, 2021 1:57 PM
• URL: https://overleaf.libguides.com/Thesis

Research Guides

Submit and publish your thesis.

• The Graduate Thesis: What is it?
• Thesis Defences
• Deadlines and Fees
• Formatting in MS Word

Formatting in LaTeX

• Making Thesis Accessible
• Thesis Embargo
• Review and Release
• Your Rights as an Author
• Re-using Third Party Materials
• Creative Commons Licenses for Theses
• Turning Thesis into an Article
• Turning Thesis into a Book
• Other Venues of Publication

For formatting instructions and requirements see the Formatting section of the School of Graduate Studies website. The thesis style template for LaTeX ( ut-thesis ) implements these requirements. You are not required to use the template, but using it will make most of the formatting requirements easier to meet.

►► Thesis template for LaTeX .

Below are some general formatting tips for drafting your thesis in LaTeX.  In addition, there are other supports available:

• Regular LaTeX workshops are offered via the library, watch the library workshop calendar at https://libcal.library.utoronto.ca/
• With questions about LaTeX formatting, contact Map and Data Library (MDL) using this form
• There are also great resources for learning LaTeX available via Overleaf

Many common problems have been solved on the TeX - LaTeX Stack Exchange Q & A Forum

LaTeX Template

To use the LaTeX and ut-thesis , you need two things: a LaTeX distribution (compiles your code), and an editor (where you write your code). Two main approaches are:

• Overleaf : is a web-based platform that combines a distribution (TeX Live) and an editor. It is beginner-friendly (minimal set-up) and some people prefer a cloud-based platform. However, manually uploading graphics and managing a bibliographic database can be tedious, especially for large projects like a thesis.
• A LaTeX distribution can be installed as described here . ut-thesis can then be installed either: a) initially, with the distribution; b) automatically when you try to compile a document using \usepackage{ut-thesis} ; or manually via graphical or terminal-based package manager for the distribution.
• The LaTeX distribution allows you to compile code, but provides no tools for writing (e.g. syntax highlighting, hotkeys, command completion, etc.). There are many editor options that provide these features. TeXstudio is one popular option.

Occasionally, the version of ut-thesis on GitHub  may be more up-to-date than the popular distributions (especially yearly TeX Live), including small bug fixes. To use the GitHub version, you can download the file ut-thesis.cls (and maybe the documentation ut-thesis .pdf ) and place it in your working directory. This will take priority over any other versions of ut-thesis on your system while in this directory.

LaTeX Formatting Tips

Here are a few tips & tricks for formatting your thesis in LateX.

Document Structure

Using the ut-thesis document class, a minimal example thesis might look like:

\documentclass{ut-thesis} \author {Your Name} \title {Thesis Title} \degree {Doctor of Philosophy} \department {LaTeX} \gradyear {2020} \begin {document}   \frontmatter   \maketitle   \begin {abstract}     % abstract goes here   \end {abstract}   \tableofcontents   \mainmatter   % main chapters go here   % references go here   \appendix   % appendices go here \end {document}

►►  A larger example is available on GitHub here .

You may want to consider splitting your code into multiple files. The contents of each file can then be added using \input{filename} .

The usual commands for document hierarchy are available like \chapter , \section , \subsection , \subsubsection , and \paragraph . To control which appear in the \tableofcontents , you can use \setcounter{tocdepth}{i} , where i = 2 includes up to \subsection , etc. For unnumbered sections, use \section* , etc. No component should be empty, such as \section{...} immediately followed by \subsection{...} .

Note: In the examples below, we denote the preamble vs body like:

preamble code --- body code

Tables & Figures

In LaTeX, tables and figures are environments called “floats”, and they usually don’t appear exactly where you have them in the code. This is to avoid awkward whitespace. Float environments are used like \begin{env} ... \end{env} , where the entire content ... will move with the float. If you really need a float to appear exactly “here”, you can use:

\usepackage{float} --- \begin{ figure}[H] ... \end {figure}

Most other environments (like equation) do not float.

A LaTeX table as a numbered float is distinct from tabular data. So, a typical table might look like:

\usepackage{booktabs} --- \begin {table}   \centering   \caption {The table caption}   \begin {tabular}{crll}     i &   Name & A &  B \\     1 &  First & 1 &  2 \\     2 & Second & 3 &  5 \\     3 &  Third & 8 & 13   \end {tabular} \end {table}

The & separates cells and \\ makes a new row. The {crll} specifies four columns: 1 centred, 1 right-aligned, and 2 left-aligned.

Fancy Tables

Some helpful packages for creating more advanced tabular data:

• booktabs : provides the commands \toprule , \midrile , and \bottomrule , which add horizontal lines of slightly different weights.
• multicol : provides the command \multicolumn{2}{r}{...} to “merge” 2 cells horizontally with the content ... , centred.
• multirow : provides the command \multirow{2}{*}{...} , to “merge” 2 cells vertically with the content ... , having width computed automatically (*).

A LaTeX figure is similarly distinct from graphical content. To include graphics, it’s best to use the command \includegraphics from the graphicx package. Then, a typical figure might look like:

\usepackage{graphicx} --- \begin {figure}   \centering   \includegraphics[width=.6 \textwidth ]{figurename} \end {figure}

Here we use .6\textwidth to make the graphic 60% the width of the main text.

By default, graphicx will look for figurename in the same folder as main.tex ; if you need to add other folders, you can use \graphicspath{{folder1/}{folder2/}...} .

The preferred package for subfigures is subcaption ; you can use it like:

\usepackage{subcaption} --- \begin {figure} % or table, then subtable below   \begin {subfigure}{0.5 \textwidth }     \includegraphics[width= \textwidth ]{figureA}     \caption {First subcaption}   \end {subfigure}   \begin {subfigure}{0.5 \textwidth }     \includegraphics[width= \textwidth ]{figureB}     \caption {Second subcaption}   \end {subfigure}   \caption {Overall figure caption} \end {figure}

This makes two subfigures each 50% of the text width, with respective subcaptions, plus an overall figure caption.

Math can be added inline with body text like $E = m c^2$ , or as a standalone equation like:

\begin {equation}   E = m c^2 \end {equation}

A complete guide to math is beyond our scope here; again, Overleaf provides a great set of resources to get started.

Cross References

We recommend using the hyperref package to make clickable links within your thesis, such as the table of contents, and references to equations, tables, figures, and other sections.

A cross-reference label can be added to a section or float environment using \label{key} , and referenced elsewhere using \ref{key} . The key will not appear in the final document (unless there is an error), so we recommend a naming convention like fig:diagram , tab:summary , or intro:back for \section{Background} within \chapter{Intro} , for example. We also recommend using a non-breaking space ~ like Figure~\ref{fig:diagram} , so that a linebreak will not separate “Figure” and the number.

You may need to compile multiple times to resolve cross-references (and citations). However, this occurs by default as needed in most editors.

The LaTeX package tikz provides excellent tools for drawing diagrams and even plotting basic math functions. Here is one small example:

\usepackage{tikz} --- \begin {tikzpicture}   \node [red,circle]  (a) at (0,0) {A};   \node [blue,square] (b) at (1,0) {B};   \draw [dotted,->]   (a) -- node[above]{ $ \alpha $ } (b); \end {tikzpicture}

Don’t forget semicolons after every command, or else you will get stuck while compiling.

There are several options for managing references in LaTeX. We recommend the most modern package: biblatex , with the biber backend.  A helpful overview is given here .

Assuming you have a file called references.bib that looks like:

@article{Lastname2020,   title = {The article title},   author = {Lastname, First and Last2, First2 and Last3 and First3},   journal = {Journal Name},   year = {2020},   vol = {99},   no = {1} } ...

then you can cite the reference Lastname2020 using biblatex like:

\usepackage[backend=biber]{biblatex} \addbibresource {references.bib} --- \cite {Lastname2020} ... \printbibliography

Depending on what editor you’re using to compile, this may work straight away. If not, you may need to update your compiling command to:

pdflatex main && biber main && pdflatex main && pdflatex main

Assuming your document is called main.tex . This is because biber is a separate tool from pdflatex . So in the command above, we first identify the cited sources using pdflatex , then collect the reference information using biber , then finish compiling the document using pdflatex , and then we compile once more in case anything got missed.

There are many options when loading biblatex to configure the reference formatting; it’s best to search the CTAN documentation for what you want to do.

Windows users may find that biber.exe or bibtex.exe get silently blocked by some antivirus software. Usually, an exception can be added within the antivirus software to allow these programs to run.

• << Previous: Formatting in MS Word
• Next: Making Thesis Accessible >>
• Last Updated: Sep 15, 2023 3:23 PM
• URL: https://guides.library.utoronto.ca/thesis

Library links

• Library Home
• Renew items and pay fines
• Library hours
• Engineering
• UT Mississauga Library
• UT Scarborough Library
• Information Commons
• All libraries

University of Toronto Libraries 130 St. George St.,Toronto, ON, M5S 1A5 [email protected] 416-978-8450 Map About web accessibility . Tell us about a web accessibility problem . About online privacy and data collection .

© University of Toronto . All rights reserved. Terms and conditions.

Connect with us

• Future Students
• Parents and Families

College of Engineering

• Research and Facilities
• Departments

Guide to Writing Your Thesis in LaTeX

Step 4: configure the options specific to your thesis.

At this point, it is assumed that you have a working LaTeX distribution, an editor, have downloaded and installed the necessary template files, and confirmed that you can build this sample thesis . If not, do that first. Now we will explain how to set things like the title, the author name, and whether it is a masters thesis or a doctoral dissertation.

Start by opening the file thesis.tex in your editor.

Setting the Class Options

The first line of the file will be:

This tells LaTeX to use the urithesis document class with all default options. There are many options that that can be given, but for now we will only concern ourselves with one.

If this is a Ph.D. dissertation, change the first line to be:

Setting the Title and Author

To set the title, you use the command:

Make sure to use proper capitalization.

Since you will be the author, set your name using the command:

The tilde between the middle initial and the last name tells LaTeX that the period does not indicate the end of a sentence, and to use a normal interword space.

The Bibliography Source File

The references will come from one or more .bib files that you create. This is the only type of file without a .tex extension that you will need to edit. The line:

tells BibTeX to look in the file references.bib for references cited in the thesis. The argument to the \reffile command can be a comma separated list of files (without the .bib extension), and it will look in all of those files.

The Preliminary Material

The pages that come before the first chapter are called the preliminary material. See the page Guidelines for the Format of Theses and Dissertations , on the Graduate School’s web site, for more information about the preliminary material. The preliminary material includes, in this order:

The automatic sections will be generated automatically, and you need not worry about them. The List of Tables and List of Figures sections will only be generated if the thesis contains any tables or figures, respectively. The argument to the command to include the four manual sections, is the name of the .tex file that contains the content for that section, without the .tex extension. For example the abstract is included with the command:

which means it will us the contents of the file abstract.tex as the abstract. The file abstract.tex should contain only the text of the abstract, as the title will be generated automatically.

The Chapters

Chapters are included with the command:

which will include the file chapterN.tex in the thesis. There should be one \newchapter{} command for each chapter of the thesis.

The chapter source files should each begin with the command

followed by the contents of the chapter.

The Appendices

Appendices are optional, but if present, they are included with the command:

which will include the file appendixN.tex in the thesis. There should be a \newappendix{} command for each appendix of the thesis.

The main difference between appendices and chapters, are that chapters are numbered starting with 1, while appendices start with the letter A. The contents of an appendix is identical to that of a chapter. Each appendix source file should begin with the command:

command, just like with chapters.

Additional Considerations

By default, the department named on the title page is Electrical Engineering, but that can be changed by using the command:

before any of the chapters are included.

The year that the thesis is generated is displayed on the title page and approval page, but the Graduate School requires that year must be the year of your official graduation. To set that date to a specific year, other than the current year, use the command:

before the \begin{document} command.

LaTeX Resources for Graduate Students: Formatting of theses and dissertations

• BibTeX reference format
• BibTeX command
• LaTeX bibliography file
• LaTeX editors and compilers
• Sample LaTeX file with bibliography
• Sample LaTeX file without bibliography
• Formatting of theses and dissertations

Formatting and structure

The Cornell Graduate School has become increasingly flexible about the formatting of theses and dissertations.  There now are only seven core requirements . For the structure of theses and dissertations here is a list of required and recommended sections .

Latex template

Among the available thesis and dissertation templates provided by the Graduate School is also a LaTeX template (ZIP archive). This template has been uploaded to Overleaf and placed in the Cornell template directory . This template contains a small fix to avoid an error message about \ifpdf .

• << Previous: Sample LaTeX file without bibliography
• Last Updated: Oct 25, 2022 5:12 PM
• URL: https://guides.library.cornell.edu/latex

• LaTeX Thesis
• Graduate Academic Affairs

LaTeX is a powerful tool for document creation, especially for documents including extensive mathematical notation. 

LaTeX Downloads

• Sample thesis
• Figure Help
• Bibliography Help
• Thesis document class file

Try MATLAB software (for numerical computation, visualization, and programming)

Learn more...

Masters/Doctoral Thesis

This template provides a full framework for writing a graduate level thesis. It is carefully structured and separated into multiple parts for easy editing. Included are the following pages/sections: a cover page, declaration of authorship, quotation, abstract, acknowledgements, contents page(s), list of figures, list of tables, abbreviations, physical constants, symbols, dedication, example chapter, example appendix and bibliography.

Description

This template provides a full framework for writing a graduate level thesis. It is carefully structured and separated into multiple parts for easy editing. Included are the following pages/sections: a cover page, declaration of authorship, quotation, abstract, acknowledgements, contents page(s), list of figures, list of tables, abbreviations, physical constants, symbols, dedication, example chapter, example appendix and bibliography. An example chapter is included which explains the basics of LaTeX and this template. It contains everything you need to know to begin writing your academic thesis using this template. Important note: this template comes as a zip file with multiple files and folders within it. It is worth reading the Chapter 1 introduction to the thesis to get an idea of what they do.

This second major version of this template was made by Vel . The thesis style was originally created by Steve R. Gunn and modified into a template by Sunil Patel .

Current Version

v2.5 (August 27, 2017)

This template is licensed under a CC BY-NC-SA 3.0 license. Click here to see what this license means for your use of the template.

Open Template for Free Editing Online

Download template, have a question.

• Ask a Question at LaTeX.org
• Report via Email

This page last updated on: August 27, 2017

LaTeX Templates Information

General enquiries [email protected]

Most templates licensed under CC BY-NC-SA 4.0

LaTeX Templates is developed in New Zealand

© Creodocs Limited. All Rights Reserved.

MSU Libraries

• Need help? Ask a Librarian
• Writing in LaTeX
• Managing Citations in LaTeX
• Creating Accessible LaTeX Documents
• Additional Help

Where to find LaTeX templates

Thesis templates.

Different LaTex templates can be used to change the structure and design of your LaTex documents. For example, there are templates available to create resumes, cv's, articles, theses, and other types of documents. Both Overleaf and Authorea allow you to search for templates shared on their platform. When writing an article for publication, you can also often find LaTex templates for specific publications on the publishers webiste or by contacting them.

Here are some of the places you can find freely available templates:

• Overleaf Templates Search interface for LaTeX templates on Overleaf.
• Authorea Templates Featured templates on Authorea including journal and publisher provided templates.
• Comprehesive TeX Archive Network Site for user uploaded TeX templates. Most packages are free to download. This is a good resource for anyone running TeX locally on their computer.
• General thesis template
• << Previous: Additional Help
• Last Updated: Oct 14, 2022 7:57 PM
• URL: https://libguides.lib.msu.edu/latex

Start your projects with quality LaTeX templates for journals, CVs, resumes, papers, presentations, assignments, letters, project reports, and more. Search or browse below.

Popular Tags

Have you checked our knowledge base ?

Message sent! Our team will review it and reply by email.