sample of a qualitative research

18 Qualitative Research Examples

Qualitative research is an approach to scientific research that involves using observation to gather and analyze non-numerical, in-depth, and well-contextualized datasets.

It serves as an integral part of academic, professional, and even daily decision-making processes (Baxter & Jack, 2008).

Methods of qualitative research encompass a wide range of techniques, from in-depth personal encounters, like ethnographies (studying cultures in-depth) and autoethnographies (examining one’s own cultural experiences), to collection of diverse perspectives on topics through methods like interviewing focus groups (gatherings of individuals to discuss specific topics).

Qualitative Research Examples

1. ethnography.

Definition: Ethnography is a qualitative research design aimed at exploring cultural phenomena. Rooted in the discipline of anthropology , this research approach investigates the social interactions, behaviors, and perceptions within groups, communities, or organizations.

Ethnographic research is characterized by extended observation of the group, often through direct participation, in the participants’ environment. An ethnographer typically lives with the study group for extended periods, intricately observing their everyday lives (Khan, 2014).

It aims to present a complete, detailed and accurate picture of the observed social life, rituals, symbols, and values from the perspective of the study group.

Example of Ethnographic Research

Title: “ The Everyday Lives of Men: An Ethnographic Investigation of Young Adult Male Identity “

Citation: Evans, J. (2010). The Everyday Lives of Men: An Ethnographic Investigation of Young Adult Male Identity. Peter Lang.

Overview: This study by Evans (2010) provides a rich narrative of young adult male identity as experienced in everyday life. The author immersed himself among a group of young men, participating in their activities and cultivating a deep understanding of their lifestyle, values, and motivations. This research exemplified the ethnographic approach, revealing complexities of the subjects’ identities and societal roles, which could hardly be accessed through other qualitative research designs.

Read my Full Guide on Ethnography Here

2. Autoethnography

Definition: Autoethnography is an approach to qualitative research where the researcher uses their own personal experiences to extend the understanding of a certain group, culture, or setting. Essentially, it allows for the exploration of self within the context of social phenomena.

Unlike traditional ethnography, which focuses on the study of others, autoethnography turns the ethnographic gaze inward, allowing the researcher to use their personal experiences within a culture as rich qualitative data (Durham, 2019).

The objective is to critically appraise one’s personal experiences as they navigate and negotiate cultural, political, and social meanings. The researcher becomes both the observer and the participant, intertwining personal and cultural experiences in the research.

Example of Autoethnographic Research

Title: “ A Day In The Life Of An NHS Nurse “

Citation: Osben, J. (2019). A day in the life of a NHS nurse in 21st Century Britain: An auto-ethnography. The Journal of Autoethnography for Health & Social Care. 1(1).

Overview: This study presents an autoethnography of a day in the life of an NHS nurse (who, of course, is also the researcher). The author uses the research to achieve reflexivity, with the researcher concluding: “Scrutinising my practice and situating it within a wider contextual backdrop has compelled me to significantly increase my level of scrutiny into the driving forces that influence my practice.”

Read my Full Guide on Autoethnography Here

3. Semi-Structured Interviews

Definition: Semi-structured interviews stand as one of the most frequently used methods in qualitative research. These interviews are planned and utilize a set of pre-established questions, but also allow for the interviewer to steer the conversation in other directions based on the responses given by the interviewee.

In semi-structured interviews, the interviewer prepares a guide that outlines the focal points of the discussion. However, the interview is flexible, allowing for more in-depth probing if the interviewer deems it necessary (Qu, & Dumay, 2011). This style of interviewing strikes a balance between structured ones which might limit the discussion, and unstructured ones, which could lack focus.

Example of Semi-Structured Interview Research

Title: “ Factors influencing adherence to cancer treatment in older adults with cancer: a systematic review “

Citation: Puts, M., et al. (2014). Factors influencing adherence to cancer treatment in older adults with cancer: a systematic review. Annals of oncology, 25 (3), 564-577.

Overview: Puts et al. (2014) executed an extensive systematic review in which they conducted semi-structured interviews with older adults suffering from cancer to examine the factors influencing their adherence to cancer treatment. The findings suggested that various factors, including side effects, faith in healthcare professionals, and social support have substantial impacts on treatment adherence. This research demonstrates how semi-structured interviews can provide rich and profound insights into the subjective experiences of patients.

4. Focus Groups

Definition: Focus groups are a qualitative research method that involves organized discussion with a selected group of individuals to gain their perspectives on a specific concept, product, or phenomenon. Typically, these discussions are guided by a moderator.

During a focus group session, the moderator has a list of questions or topics to discuss, and participants are encouraged to interact with each other (Morgan, 2010). This interactivity can stimulate more information and provide a broader understanding of the issue under scrutiny. The open format allows participants to ask questions and respond freely, offering invaluable insights into attitudes, experiences, and group norms.

Example of Focus Group Research

Title: “ Perspectives of Older Adults on Aging Well: A Focus Group Study “

Citation: Halaweh, H., Dahlin-Ivanoff, S., Svantesson, U., & Willén, C. (2018). Perspectives of older adults on aging well: a focus group study. Journal of aging research .

Overview: This study aimed to explore what older adults (aged 60 years and older) perceived to be ‘aging well’. The researchers identified three major themes from their focus group interviews: a sense of well-being, having good physical health, and preserving good mental health. The findings highlight the importance of factors such as positive emotions, social engagement, physical activity, healthy eating habits, and maintaining independence in promoting aging well among older adults.

5. Phenomenology

Definition: Phenomenology, a qualitative research method, involves the examination of lived experiences to gain an in-depth understanding of the essence or underlying meanings of a phenomenon.

The focus of phenomenology lies in meticulously describing participants’ conscious experiences related to the chosen phenomenon (Padilla-Díaz, 2015).

In a phenomenological study, the researcher collects detailed, first-hand perspectives of the participants, typically via in-depth interviews, and then uses various strategies to interpret and structure these experiences, ultimately revealing essential themes (Creswell, 2013). This approach focuses on the perspective of individuals experiencing the phenomenon, seeking to explore, clarify, and understand the meanings they attach to those experiences.

Example of Phenomenology Research

Title: “ A phenomenological approach to experiences with technology: current state, promise, and future directions for research ”

Citation: Cilesiz, S. (2011). A phenomenological approach to experiences with technology: Current state, promise, and future directions for research. Educational Technology Research and Development, 59 , 487-510.

Overview: A phenomenological approach to experiences with technology by Sebnem Cilesiz represents a good starting point for formulating a phenomenological study. With its focus on the ‘essence of experience’, this piece presents methodological, reliability, validity, and data analysis techniques that phenomenologists use to explain how people experience technology in their everyday lives.

6. Grounded Theory

Definition: Grounded theory is a systematic methodology in qualitative research that typically applies inductive reasoning . The primary aim is to develop a theoretical explanation or framework for a process, action, or interaction grounded in, and arising from, empirical data (Birks & Mills, 2015).

In grounded theory, data collection and analysis work together in a recursive process. The researcher collects data, analyses it, and then collects more data based on the evolving understanding of the research context. This ongoing process continues until a comprehensive theory that represents the data and the associated phenomenon emerges – a point known as theoretical saturation (Charmaz, 2014).

Example of Grounded Theory Research

Title: “ Student Engagement in High School Classrooms from the Perspective of Flow Theory “

Citation: Shernoff, D. J., Csikszentmihalyi, M., Shneider, B., & Shernoff, E. S. (2003). Student engagement in high school classrooms from the perspective of flow theory. School Psychology Quarterly, 18 (2), 158–176.

Overview: Shernoff and colleagues (2003) used grounded theory to explore student engagement in high school classrooms. The researchers collected data through student self-reports, interviews, and observations. Key findings revealed that academic challenge, student autonomy, and teacher support emerged as the most significant factors influencing students’ engagement, demonstrating how grounded theory can illuminate complex dynamics within real-world contexts.

7. Narrative Research

Definition: Narrative research is a qualitative research method dedicated to storytelling and understanding how individuals experience the world. It focuses on studying an individual’s life and experiences as narrated by that individual (Polkinghorne, 2013).

In narrative research, the researcher collects data through methods such as interviews, observations , and document analysis. The emphasis is on the stories told by participants – narratives that reflect their experiences, thoughts, and feelings.

These stories are then interpreted by the researcher, who attempts to understand the meaning the participant attributes to these experiences (Josselson, 2011).

Example of Narrative Research

Title: “Narrative Structures and the Language of the Self”

Citation: McAdams, D. P., Josselson, R., & Lieblich, A. (2006). Identity and story: Creating self in narrative . American Psychological Association.

Overview: In this innovative study, McAdams et al. (2006) employed narrative research to explore how individuals construct their identities through the stories they tell about themselves. By examining personal narratives, the researchers discerned patterns associated with characters, motivations, conflicts, and resolutions, contributing valuable insights about the relationship between narrative and individual identity.

8. Case Study Research

Definition: Case study research is a qualitative research method that involves an in-depth investigation of a single instance or event: a case. These ‘cases’ can range from individuals, groups, or entities to specific projects, programs, or strategies (Creswell, 2013).

The case study method typically uses multiple sources of information for comprehensive contextual analysis. It aims to explore and understand the complexity and uniqueness of a particular case in a real-world context (Merriam & Tisdell, 2015). This investigation could result in a detailed description of the case, a process for its development, or an exploration of a related issue or problem.

Example of Case Study Research

Title: “ Teacher’s Role in Fostering Preschoolers’ Computational Thinking: An Exploratory Case Study “

Citation: Wang, X. C., Choi, Y., Benson, K., Eggleston, C., & Weber, D. (2021). Teacher’s role in fostering preschoolers’ computational thinking: An exploratory case study. Early Education and Development , 32 (1), 26-48.

Overview: This study investigates the role of teachers in promoting computational thinking skills in preschoolers. The study utilized a qualitative case study methodology to examine the computational thinking scaffolding strategies employed by a teacher interacting with three preschoolers in a small group setting. The findings highlight the importance of teachers’ guidance in fostering computational thinking practices such as problem reformulation/decomposition, systematic testing, and debugging.

Read about some Famous Case Studies in Psychology Here

9. Participant Observation

Definition: Participant observation has the researcher immerse themselves in a group or community setting to observe the behavior of its members. It is similar to ethnography, but generally, the researcher isn’t embedded for a long period of time.

The researcher, being a participant, engages in daily activities, interactions, and events as a way of conducting a detailed study of a particular social phenomenon (Kawulich, 2005).

The method involves long-term engagement in the field, maintaining detailed records of observed events, informal interviews, direct participation, and reflexivity. This approach allows for a holistic view of the participants’ lived experiences, behaviours, and interactions within their everyday environment (Dewalt, 2011).

Example of Participant Observation Research

Title: Conflict in the boardroom: a participant observation study of supervisory board dynamics

Citation: Heemskerk, E. M., Heemskerk, K., & Wats, M. M. (2017). Conflict in the boardroom: a participant observation study of supervisory board dynamics. Journal of Management & Governance , 21 , 233-263.

Overview: This study examined how conflicts within corporate boards affect their performance. The researchers used a participant observation method, where they actively engaged with 11 supervisory boards and observed their dynamics. They found that having a shared understanding of the board’s role called a common framework, improved performance by reducing relationship conflicts, encouraging task conflicts, and minimizing conflicts between the board and CEO.

10. Non-Participant Observation

Definition: Non-participant observation is a qualitative research method in which the researcher observes the phenomena of interest without actively participating in the situation, setting, or community being studied.

This method allows the researcher to maintain a position of distance, as they are solely an observer and not a participant in the activities being observed (Kawulich, 2005).

During non-participant observation, the researcher typically records field notes on the actions, interactions, and behaviors observed , focusing on specific aspects of the situation deemed relevant to the research question.

This could include verbal and nonverbal communication , activities, interactions, and environmental contexts (Angrosino, 2007). They could also use video or audio recordings or other methods to collect data.

Example of Non-Participant Observation Research

Title: Mental Health Nurses’ attitudes towards mental illness and recovery-oriented practice in acute inpatient psychiatric units: A non-participant observation study

Citation: Sreeram, A., Cross, W. M., & Townsin, L. (2023). Mental Health Nurses’ attitudes towards mental illness and recovery‐oriented practice in acute inpatient psychiatric units: A non‐participant observation study. International Journal of Mental Health Nursing .

Overview: This study investigated the attitudes of mental health nurses towards mental illness and recovery-oriented practice in acute inpatient psychiatric units. The researchers used a non-participant observation method, meaning they observed the nurses without directly participating in their activities. The findings shed light on the nurses’ perspectives and behaviors, providing valuable insights into their attitudes toward mental health and recovery-focused care in these settings.

11. Content Analysis

Definition: Content Analysis involves scrutinizing textual, visual, or spoken content to categorize and quantify information. The goal is to identify patterns, themes, biases, or other characteristics (Hsieh & Shannon, 2005).

Content Analysis is widely used in various disciplines for a multitude of purposes. Researchers typically use this method to distill large amounts of unstructured data, like interview transcripts, newspaper articles, or social media posts, into manageable and meaningful chunks.

When wielded appropriately, Content Analysis can illuminate the density and frequency of certain themes within a dataset, provide insights into how specific terms or concepts are applied contextually, and offer inferences about the meanings of their content and use (Duriau, Reger, & Pfarrer, 2007).

Example of Content Analysis

Title: Framing European politics: A content analysis of press and television news .

Citation: Semetko, H. A., & Valkenburg, P. M. (2000). Framing European politics: A content analysis of press and television news. Journal of Communication, 50 (2), 93-109.

Overview: This study analyzed press and television news articles about European politics using a method called content analysis. The researchers examined the prevalence of different “frames” in the news, which are ways of presenting information to shape audience perceptions. They found that the most common frames were attribution of responsibility, conflict, economic consequences, human interest, and morality.

Read my Full Guide on Content Analysis Here

12. Discourse Analysis

Definition: Discourse Analysis, a qualitative research method, interprets the meanings, functions, and coherence of certain languages in context.

Discourse analysis is typically understood through social constructionism, critical theory , and poststructuralism and used for understanding how language constructs social concepts (Cheek, 2004).

Discourse Analysis offers great breadth, providing tools to examine spoken or written language, often beyond the level of the sentence. It enables researchers to scrutinize how text and talk articulate social and political interactions and hierarchies.

Insight can be garnered from different conversations, institutional text, and media coverage to understand how topics are addressed or framed within a specific social context (Jorgensen & Phillips, 2002).

Example of Discourse Analysis

Title: The construction of teacher identities in educational policy documents: A critical discourse analysis

Citation: Thomas, S. (2005). The construction of teacher identities in educational policy documents: A critical discourse analysis. Critical Studies in Education, 46 (2), 25-44.

Overview: The author examines how an education policy in one state of Australia positions teacher professionalism and teacher identities. While there are competing discourses about professional identity, the policy framework privileges a  narrative that frames the ‘good’ teacher as one that accepts ever-tightening control and regulation over their professional practice.

Read my Full Guide on Discourse Analysis Here

13. Action Research

Definition: Action Research is a qualitative research technique that is employed to bring about change while simultaneously studying the process and results of that change.

This method involves a cyclical process of fact-finding, action, evaluation, and reflection (Greenwood & Levin, 2016).

Typically, Action Research is used in the fields of education, social sciences , and community development. The process isn’t just about resolving an issue but also developing knowledge that can be used in the future to address similar or related problems.

The researcher plays an active role in the research process, which is normally broken down into four steps: 

• developing a plan to improve what is currently being done
• implementing the plan
• observing the effects of the plan, and
• reflecting upon these effects (Smith, 2010).

Example of Action Research

Title: Using Digital Sandbox Gaming to Improve Creativity Within Boys’ Writing

Citation: Ellison, M., & Drew, C. (2020). Using digital sandbox gaming to improve creativity within boys’ writing. Journal of Research in Childhood Education , 34 (2), 277-287.

Overview: This was a research study one of my research students completed in his own classroom under my supervision. He implemented a digital game-based approach to literacy teaching with boys and interviewed his students to see if the use of games as stimuli for storytelling helped draw them into the learning experience.

Read my Full Guide on Action Research Here

14. Semiotic Analysis

Definition: Semiotic Analysis is a qualitative method of research that interprets signs and symbols in communication to understand sociocultural phenomena. It stems from semiotics, the study of signs and symbols and their use or interpretation (Chandler, 2017).

In a Semiotic Analysis, signs (anything that represents something else) are interpreted based on their significance and the role they play in representing ideas.

This type of research often involves the examination of images, sounds, and word choice to uncover the embedded sociocultural meanings. For example, an advertisement for a car might be studied to learn more about societal views on masculinity or success (Berger, 2010).

Example of Semiotic Research

Title: Shielding the learned body: a semiotic analysis of school badges in New South Wales, Australia

Citation: Symes, C. (2023). Shielding the learned body: a semiotic analysis of school badges in New South Wales, Australia. Semiotica , 2023 (250), 167-190.

Overview: This study examines school badges in New South Wales, Australia, and explores their significance through a semiotic analysis. The badges, which are part of the school’s visual identity, are seen as symbolic representations that convey meanings. The analysis reveals that these badges often draw on heraldic models, incorporating elements like colors, names, motifs, and mottoes that reflect local culture and history, thus connecting students to their national identity. Additionally, the study highlights how some schools have shifted from traditional badges to modern logos and slogans, reflecting a more business-oriented approach.

15. Qualitative Longitudinal Studies

Definition: Qualitative Longitudinal Studies are a research method that involves repeated observation of the same items over an extended period of time.

Unlike a snapshot perspective, this method aims to piece together individual histories and examine the influences and impacts of change (Neale, 2019).

Qualitative Longitudinal Studies provide an in-depth understanding of change as it happens, including changes in people’s lives, their perceptions, and their behaviors.

For instance, this method could be used to follow a group of students through their schooling years to understand the evolution of their learning behaviors and attitudes towards education (Saldaña, 2003).

Example of Qualitative Longitudinal Research

Title: Patient and caregiver perspectives on managing pain in advanced cancer: a qualitative longitudinal study

Citation: Hackett, J., Godfrey, M., & Bennett, M. I. (2016). Patient and caregiver perspectives on managing pain in advanced cancer: a qualitative longitudinal study.  Palliative medicine ,  30 (8), 711-719.

Overview: This article examines how patients and their caregivers manage pain in advanced cancer through a qualitative longitudinal study. The researchers interviewed patients and caregivers at two different time points and collected audio diaries to gain insights into their experiences, making this study longitudinal.

Read my Full Guide on Longitudinal Research Here

16. Open-Ended Surveys

Definition: Open-Ended Surveys are a type of qualitative research method where respondents provide answers in their own words. Unlike closed-ended surveys, which limit responses to predefined options, open-ended surveys allow for expansive and unsolicited explanations (Fink, 2013).

Open-ended surveys are commonly used in a range of fields, from market research to social studies. As they don’t force respondents into predefined response categories, these surveys help to draw out rich, detailed data that might uncover new variables or ideas.

For example, an open-ended survey might be used to understand customer opinions about a new product or service (Lavrakas, 2008).

Contrast this to a quantitative closed-ended survey, like a Likert scale, which could theoretically help us to come up with generalizable data but is restricted by the questions on the questionnaire, meaning new and surprising data and insights can’t emerge from the survey results in the same way.

Example of Open-Ended Survey Research

Title: Advantages and disadvantages of technology in relationships: Findings from an open-ended survey

Citation: Hertlein, K. M., & Ancheta, K. (2014). Advantages and disadvantages of technology in relationships: Findings from an open-ended survey.  The Qualitative Report ,  19 (11), 1-11.

Overview: This article examines the advantages and disadvantages of technology in couple relationships through an open-ended survey method. Researchers analyzed responses from 410 undergraduate students to understand how technology affects relationships. They found that technology can contribute to relationship development, management, and enhancement, but it can also create challenges such as distancing, lack of clarity, and impaired trust.

17. Naturalistic Observation

Definition: Naturalistic Observation is a type of qualitative research method that involves observing individuals in their natural environments without interference or manipulation by the researcher.

Naturalistic observation is often used when conducting research on behaviors that cannot be controlled or manipulated in a laboratory setting (Kawulich, 2005).

It is frequently used in the fields of psychology, sociology, and anthropology. For instance, to understand the social dynamics in a schoolyard, a researcher could spend time observing the children interact during their recess, noting their behaviors, interactions, and conflicts without imposing their presence on the children’s activities (Forsyth, 2010).

Example of Naturalistic Observation Research

Title: Dispositional mindfulness in daily life: A naturalistic observation study

Citation: Kaplan, D. M., Raison, C. L., Milek, A., Tackman, A. M., Pace, T. W., & Mehl, M. R. (2018). Dispositional mindfulness in daily life: A naturalistic observation study. PloS one , 13 (11), e0206029.

Overview: In this study, researchers conducted two studies: one exploring assumptions about mindfulness and behavior, and the other using naturalistic observation to examine actual behavioral manifestations of mindfulness. They found that trait mindfulness is associated with a heightened perceptual focus in conversations, suggesting that being mindful is expressed primarily through sharpened attention rather than observable behavioral or social differences.

Read my Full Guide on Naturalistic Observation Here

18. Photo-Elicitation

Definition: Photo-elicitation utilizes photographs as a means to trigger discussions and evoke responses during interviews. This strategy aids in bringing out topics of discussion that may not emerge through verbal prompting alone (Harper, 2002).

Traditionally, Photo-Elicitation has been useful in various fields such as education, psychology, and sociology. The method involves the researcher or participants taking photographs, which are then used as prompts for discussion.

For instance, a researcher studying urban environmental issues might invite participants to photograph areas in their neighborhood that they perceive as environmentally detrimental, and then discuss each photo in depth (Clark-Ibáñez, 2004).

Example of Photo-Elicitation Research

Title: Early adolescent food routines: A photo-elicitation study

Citation: Green, E. M., Spivak, C., & Dollahite, J. S. (2021). Early adolescent food routines: A photo-elicitation study. Appetite, 158 .

Overview: This study focused on early adolescents (ages 10-14) and their food routines. Researchers conducted in-depth interviews using a photo-elicitation approach, where participants took photos related to their food choices and experiences. Through analysis, the study identified various routines and three main themes: family, settings, and meals/foods consumed, revealing how early adolescents view and are influenced by their eating routines.

Features of Qualitative Research

Qualitative research is a research method focused on understanding the meaning individuals or groups attribute to a social or human problem (Creswell, 2013).

Some key features of this method include:

• Naturalistic Inquiry: Qualitative research happens in the natural setting of the phenomena, aiming to understand “real world” situations (Patton, 2015). This immersion in the field or subject allows the researcher to gather a deep understanding of the subject matter.
• Emphasis on Process: It aims to understand how events unfold over time rather than focusing solely on outcomes (Merriam & Tisdell, 2015). The process-oriented nature of qualitative research allows researchers to investigate sequences, timing, and changes.
• Interpretive: It involves interpreting and making sense of phenomena in terms of the meanings people assign to them (Denzin & Lincoln, 2011). This interpretive element allows for rich, nuanced insights into human behavior and experiences.
• Holistic Perspective: Qualitative research seeks to understand the whole phenomenon rather than focusing on individual components (Creswell, 2013). It emphasizes the complex interplay of factors, providing a richer, more nuanced view of the research subject.
• Prioritizes Depth over Breadth: Qualitative research favors depth of understanding over breadth, typically involving a smaller but more focused sample size (Hennink, Hutter, & Bailey, 2020). This enables detailed exploration of the phenomena of interest, often leading to rich and complex data.

Qualitative vs Quantitative Research

Qualitative research centers on exploring and understanding the meaning individuals or groups attribute to a social or human problem (Creswell, 2013).

It involves an in-depth approach to the subject matter, aiming to capture the richness and complexity of human experience.

Examples include conducting interviews, observing behaviors, or analyzing text and images.

There are strengths inherent in this approach. In its focus on understanding subjective experiences and interpretations, qualitative research can yield rich and detailed data that quantitative research may overlook (Denzin & Lincoln, 2011).

Additionally, qualitative research is adaptive, allowing the researcher to respond to new directions and insights as they emerge during the research process.

However, there are also limitations. Because of the interpretive nature of this research, findings may not be generalizable to a broader population (Marshall & Rossman, 2014). Well-designed quantitative research, on the other hand, can be generalizable.

Moreover, the reliability and validity of qualitative data can be challenging to establish due to its subjective nature, unlike quantitative research, which is ideally more objective.

Compare Qualitative and Quantitative Research Methodologies in This Guide Here

In conclusion, qualitative research methods provide distinctive ways to explore social phenomena and understand nuances that quantitative approaches might overlook. Each method, from Ethnography to Photo-Elicitation, presents its strengths and weaknesses but they all offer valuable means of investigating complex, real-world situations. The goal for the researcher is not to find a definitive tool, but to employ the method best suited for their research questions and the context at hand (Almalki, 2016). Above all, these methods underscore the richness of human experience and deepen our understanding of the world around us.

Angrosino, M. (2007). Doing ethnographic and observational research. Sage Publications.

Areni, C. S., & Kim, D. (1994). The influence of in-store lighting on consumers’ examination of merchandise in a wine store. International Journal of Research in Marketing, 11 (2), 117-125.

Barker, C., Pistrang, N., & Elliott, R. (2016). Research Methods in Clinical Psychology: An Introduction for Students and Practitioners. John Wiley & Sons.

Baxter, P. & Jack, S. (2008). Qualitative case study methodology: Study design and implementation for novice researchers. The Qualitative Report, 13 (4), 544-559.

Berger, A. A. (2010). The Objects of Affection: Semiotics and Consumer Culture. Palgrave Macmillan.

Bevan, M. T. (2014). A method of phenomenological interviewing. Qualitative health research, 24 (1), 136-144.

Birks, M., & Mills, J. (2015). Grounded theory: A practical guide . Sage Publications.

Bryman, A. (2015) . The SAGE Handbook of Qualitative Research. Sage Publications.

Chandler, D. (2017). Semiotics: The Basics. Routledge.

Charmaz, K. (2014). Constructing grounded theory. Sage Publications.

Cheek, J. (2004). At the margins? Discourse analysis and qualitative research. Qualitative Health Research, 14(8), 1140-1150.

Clark-Ibáñez, M. (2004). Framing the social world with photo-elicitation interviews. American Behavioral Scientist, 47(12), 1507-1527.

Creswell, J. W. (2013). Research Design: Qualitative, Quantitative and Mixed Methods Approaches. Sage Publications.

Creswell, J. W., & Creswell, J. D. (2017). Research design: Qualitative, quantitative, and mixed methods approaches. Sage publications.

Crowe, S., Cresswell, K., Robertson, A., Huby, G., Avery, A., & Sheikh, A. (2011). The case study approach. BMC Medical Research Methodology, 11(100), 1-9.

Denzin, N. K., & Lincoln, Y. S. (2011). The Sage Handbook of Qualitative Research. Sage.

Dewalt, K. M., & Dewalt, B. R. (2011). Participant observation: A guide for fieldworkers. Rowman Altamira.

Doody, O., Slevin, E., & Taggart, L. (2013). Focus group interviews in nursing research: part 1. British Journal of Nursing, 22(1), 16-19.

Durham, A. (2019). Autoethnography. In P. Atkinson (Ed.), Qualitative Research Methods. Oxford University Press.

Duriau, V. J., Reger, R. K., & Pfarrer, M. D. (2007). A content analysis of the content analysis literature in organization studies: Research themes, data sources, and methodological refinements. Organizational Research Methods, 10(1), 5-34.

Evans, J. (2010). The Everyday Lives of Men: An Ethnographic Investigation of Young Adult Male Identity. Peter Lang.

Farrall, S. (2006). What is qualitative longitudinal research? Papers in Social Research Methods, Qualitative Series, No.11, London School of Economics, Methodology Institute.

Fielding, J., & Fielding, N. (2008). Synergy and synthesis: integrating qualitative and quantitative data. The SAGE handbook of social research methods, 555-571.

Fink, A. (2013). How to conduct surveys: A step-by-step guide . SAGE.

Forsyth, D. R. (2010). Group Dynamics . Wadsworth Cengage Learning.

Fugard, A. J. B., & Potts, H. W. W. (2015). Supporting thinking on sample sizes for thematic analyses: A quantitative tool. International Journal of Social Research Methodology, 18 (6), 669–684.

Glaser, B. G., & Strauss, A. L. (1967). The discovery of grounded theory: Strategies for qualitative research. Aldine de Gruyter.

Gray, J. R., Grove, S. K., & Sutherland, S. (2017). Burns and Grove’s the Practice of Nursing Research E-Book: Appraisal, Synthesis, and Generation of Evidence. Elsevier Health Sciences.

Greenwood, D. J., & Levin, M. (2016). Introduction to action research: Social research for social change. SAGE.

Harper, D. (2002). Talking about pictures: A case for photo elicitation. Visual Studies, 17 (1), 13-26.

Heinonen, T. (2012). Making Sense of the Social: Human Sciences and the Narrative Turn. Rozenberg Publishers.

Heisley, D. D., & Levy, S. J. (1991). Autodriving: A photoelicitation technique. Journal of Consumer Research, 18 (3), 257-272.

Hennink, M. M., Hutter, I., & Bailey, A. (2020). Qualitative Research Methods . SAGE Publications Ltd.

Hsieh, H. F., & Shannon, S. E. (2005). Three Approaches to Qualitative Content Analysis. Qualitative Health Research, 15 (9), 1277–1288.

Jorgensen, D. L. (2015). Participant Observation. In Emerging Trends in the Social and Behavioral Sciences: An Interdisciplinary, Searchable, and Linkable Resource. John Wiley & Sons, Inc.

Jorgensen, M., & Phillips, L. (2002). Discourse Analysis as Theory and Method . SAGE.

Josselson, R. (2011). Narrative research: Constructing, deconstructing, and reconstructing story. In Five ways of doing qualitative analysis . Guilford Press.

Kawulich, B. B. (2005). Participant observation as a data collection method. Forum: Qualitative Social Research, 6 (2).

Khan, S. (2014). Qualitative Research Method: Grounded Theory. Journal of Basic and Clinical Pharmacy, 5 (4), 86-88.

Koshy, E., Koshy, V., & Waterman, H. (2010). Action Research in Healthcare . SAGE.

Krippendorff, K. (2013). Content Analysis: An Introduction to its Methodology. SAGE.

Lannon, J., & Cooper, P. (2012). Humanistic Advertising: A Holistic Cultural Perspective. International Journal of Advertising, 15 (2), 97–111.

Lavrakas, P. J. (2008). Encyclopedia of survey research methods. SAGE Publications.

Lieblich, A., Tuval-Mashiach, R., & Zilber, T. (2008). Narrative research: Reading, analysis and interpretation. Sage Publications.

Mackey, A., & Gass, S. M. (2015). Second language research: Methodology and design. Routledge.

Marshall, C., & Rossman, G. B. (2014). Designing qualitative research. Sage publications.

McAdams, D. P., Josselson, R., & Lieblich, A. (2006). Identity and story: Creating self in narrative. American Psychological Association.

Merriam, S. B., & Tisdell, E. J. (2015). Qualitative Research: A Guide to Design and Implementation. Jossey-Bass.

Mick, D. G. (1986). Consumer Research and Semiotics: Exploring the Morphology of Signs, Symbols, and Significance. Journal of Consumer Research, 13 (2), 196-213.

Morgan, D. L. (2010). Focus groups as qualitative research. Sage Publications.

Mulhall, A. (2003). In the field: notes on observation in qualitative research. Journal of Advanced Nursing, 41 (3), 306-313.

Neale, B. (2019). What is Qualitative Longitudinal Research? Bloomsbury Publishing.

Nolan, L. B., & Renderos, T. B. (2012). A focus group study on the influence of fatalism and religiosity on cancer risk perceptions in rural, eastern North Carolina. Journal of religion and health, 51 (1), 91-104.

Padilla-Díaz, M. (2015). Phenomenology in educational qualitative research: Philosophy as science or philosophical science? International Journal of Educational Excellence, 1 (2), 101-110.

Parker, I. (2014). Discourse dynamics: Critical analysis for social and individual psychology . Routledge.

Patton, M. Q. (2015). Qualitative research & evaluation methods: Integrating theory and practice . Sage Publications.

Polkinghorne, D. E. (2013). Narrative configuration in qualitative analysis. In Life history and narrative. Routledge.

Puts, M. T., Tapscott, B., Fitch, M., Howell, D., Monette, J., Wan-Chow-Wah, D., Krzyzanowska, M., Leighl, N. B., Springall, E., & Alibhai, S. (2014). Factors influencing adherence to cancer treatment in older adults with cancer: a systematic review. Annals of oncology, 25 (3), 564-577.

Qu, S. Q., & Dumay, J. (2011). The qualitative research interview . Qualitative research in accounting & management.

Ali, J., & Bhaskar, S. B. (2016). Basic statistical tools in research and data analysis. Indian Journal of Anaesthesia, 60 (9), 662–669.

Rosenbaum, M. S. (2017). Exploring the social supportive role of third places in consumers’ lives. Journal of Service Research, 20 (1), 26-42.

Saldaña, J. (2003). Longitudinal Qualitative Research: Analyzing Change Through Time . AltaMira Press.

Saldaña, J. (2014). The Coding Manual for Qualitative Researchers. SAGE.

Shernoff, D. J., Csikszentmihalyi, M., Shneider, B., & Shernoff, E. S. (2003). Student engagement in high school classrooms from the perspective of flow theory. School Psychology Quarterly, 18 (2), 158-176.

Smith, J. A. (2015). Qualitative Psychology: A Practical Guide to Research Methods . Sage Publications.

Smith, M. K. (2010). Action Research. The encyclopedia of informal education.

Sue, V. M., & Ritter, L. A. (2012). Conducting online surveys . SAGE Publications.

Van Auken, P. M., Frisvoll, S. J., & Stewart, S. I. (2010). Visualising community: using participant-driven photo-elicitation for research and application. Local Environment, 15 (4), 373-388.

Van Voorhis, F. L., & Morgan, B. L. (2007). Understanding Power and Rules of Thumb for Determining Sample Sizes. Tutorials in Quantitative Methods for Psychology, 3 (2), 43–50.

Wodak, R., & Meyer, M. (2015). Methods of Critical Discourse Analysis . SAGE.

Zuber-Skerritt, O. (2018). Action research for developing educational theories and practices . Routledge.

Chris Drew (PhD)

Dr. Chris Drew is the founder of the Helpful Professor. He holds a PhD in education and has published over 20 articles in scholarly journals. He is the former editor of the Journal of Learning Development in Higher Education. [Image Descriptor: Photo of Chris]

• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ 7 Key Features of 21st Century Learning
• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ Sociocultural Theory of Learning in the Classroom
• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ The 4 Principles of Pragmatism in Education
• Chris Drew (PhD) https://helpfulprofessor.com/author/chris-drew-phd/ 17 Deep Processing Examples

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

Qualitative Research: Characteristics, Design, Methods & Examples

Lauren McCall

MSc Health Psychology Graduate

MSc, Health Psychology, University of Nottingham

Lauren obtained an MSc in Health Psychology from The University of Nottingham with a distinction classification.

Learn about our Editorial Process

Saul Mcleod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul Mcleod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

On This Page:

Qualitative research is a type of research methodology that focuses on gathering and analyzing non-numerical data to gain a deeper understanding of human behavior, experiences, and perspectives.

It aims to explore the “why” and “how” of a phenomenon rather than the “what,” “where,” and “when” typically addressed by quantitative research.

Unlike quantitative research, which focuses on gathering and analyzing numerical data for statistical analysis, qualitative research involves researchers interpreting data to identify themes, patterns, and meanings.

Qualitative research can be used to:

• Gain deep contextual understandings of the subjective social reality of individuals
• To answer questions about experience and meaning from the participant’s perspective
• To design hypotheses, theory must be researched using qualitative methods to determine what is important before research can begin. 

Examples of qualitative research questions include: 

• How does stress influence young adults’ behavior?
• What factors influence students’ school attendance rates in developed countries?
• How do adults interpret binge drinking in the UK?
• What are the psychological impacts of cervical cancer screening in women?
• How can mental health lessons be integrated into the school curriculum? 

Characteristics 

Naturalistic setting.

Individuals are studied in their natural setting to gain a deeper understanding of how people experience the world. This enables the researcher to understand a phenomenon close to how participants experience it. 

Naturalistic settings provide valuable contextual information to help researchers better understand and interpret the data they collect.

The environment, social interactions, and cultural factors can all influence behavior and experiences, and these elements are more easily observed in real-world settings.

Reality is socially constructed

Qualitative research aims to understand how participants make meaning of their experiences – individually or in social contexts. It assumes there is no objective reality and that the social world is interpreted (Yilmaz, 2013). 

The primacy of subject matter 

The primary aim of qualitative research is to understand the perspectives, experiences, and beliefs of individuals who have experienced the phenomenon selected for research rather than the average experiences of groups of people (Minichiello, 1990).

An in-depth understanding is attained since qualitative techniques allow participants to freely disclose their experiences, thoughts, and feelings without constraint (Tenny et al., 2022). 

Variables are complex, interwoven, and difficult to measure

Factors such as experiences, behaviors, and attitudes are complex and interwoven, so they cannot be reduced to isolated variables , making them difficult to measure quantitatively.

However, a qualitative approach enables participants to describe what, why, or how they were thinking/ feeling during a phenomenon being studied (Yilmaz, 2013). 

Emic (insider’s point of view)

The phenomenon being studied is centered on the participants’ point of view (Minichiello, 1990).

Emic is used to describe how participants interact, communicate, and behave in the research setting (Scarduzio, 2017).

Interpretive analysis

In qualitative research, interpretive analysis is crucial in making sense of the collected data.

This process involves examining the raw data, such as interview transcripts, field notes, or documents, and identifying the underlying themes, patterns, and meanings that emerge from the participants’ experiences and perspectives.

Collecting Qualitative Data

There are four main research design methods used to collect qualitative data: observations, interviews,  focus groups, and ethnography.

Observations

This method involves watching and recording phenomena as they occur in nature. Observation can be divided into two types: participant and non-participant observation.

In participant observation, the researcher actively participates in the situation/events being observed.

In non-participant observation, the researcher is not an active part of the observation and tries not to influence the behaviors they are observing (Busetto et al., 2020). 

Observations can be covert (participants are unaware that a researcher is observing them) or overt (participants are aware of the researcher’s presence and know they are being observed).

However, awareness of an observer’s presence may influence participants’ behavior. 

Interviews give researchers a window into the world of a participant by seeking their account of an event, situation, or phenomenon. They are usually conducted on a one-to-one basis and can be distinguished according to the level at which they are structured (Punch, 2013). 

Structured interviews involve predetermined questions and sequences to ensure replicability and comparability. However, they are unable to explore emerging issues.

Informal interviews consist of spontaneous, casual conversations which are closer to the truth of a phenomenon. However, information is gathered using quick notes made by the researcher and is therefore subject to recall bias. 

Semi-structured interviews have a flexible structure, phrasing, and placement so emerging issues can be explored (Denny & Weckesser, 2022).

The use of probing questions and clarification can lead to a detailed understanding, but semi-structured interviews can be time-consuming and subject to interviewer bias. 

Focus groups 

Similar to interviews, focus groups elicit a rich and detailed account of an experience. However, focus groups are more dynamic since participants with shared characteristics construct this account together (Denny & Weckesser, 2022).

A shared narrative is built between participants to capture a group experience shaped by a shared context. 

The researcher takes on the role of a moderator, who will establish ground rules and guide the discussion by following a topic guide to focus the group discussions.

Typically, focus groups have 4-10 participants as a discussion can be difficult to facilitate with more than this, and this number allows everyone the time to speak.

Ethnography

Ethnography is a methodology used to study a group of people’s behaviors and social interactions in their environment (Reeves et al., 2008).

Data are collected using methods such as observations, field notes, or structured/ unstructured interviews.

The aim of ethnography is to provide detailed, holistic insights into people’s behavior and perspectives within their natural setting. In order to achieve this, researchers immerse themselves in a community or organization. 

Due to the flexibility and real-world focus of ethnography, researchers are able to gather an in-depth, nuanced understanding of people’s experiences, knowledge and perspectives that are influenced by culture and society.

In order to develop a representative picture of a particular culture/ context, researchers must conduct extensive field work. 

This can be time-consuming as researchers may need to immerse themselves into a community/ culture for a few days, or possibly a few years.

Qualitative Data Analysis Methods

Different methods can be used for analyzing qualitative data. The researcher chooses based on the objectives of their study. 

The researcher plays a key role in the interpretation of data, making decisions about the coding, theming, decontextualizing, and recontextualizing of data (Starks & Trinidad, 2007). 

Grounded theory

Grounded theory is a qualitative method specifically designed to inductively generate theory from data. It was developed by Glaser and Strauss in 1967 (Glaser & Strauss, 2017).

 This methodology aims to develop theories (rather than test hypotheses) that explain a social process, action, or interaction (Petty et al., 2012). To inform the developing theory, data collection and analysis run simultaneously. 

There are three key types of coding used in grounded theory: initial (open), intermediate (axial), and advanced (selective) coding. 

Throughout the analysis, memos should be created to document methodological and theoretical ideas about the data. Data should be collected and analyzed until data saturation is reached and a theory is developed. 

Content analysis

Content analysis was first used in the early twentieth century to analyze textual materials such as newspapers and political speeches.

Content analysis is a research method used to identify and analyze the presence and patterns of themes, concepts, or words in data (Vaismoradi et al., 2013). 

This research method can be used to analyze data in different formats, which can be written, oral, or visual. 

The goal of content analysis is to develop themes that capture the underlying meanings of data (Schreier, 2012). 

Qualitative content analysis can be used to validate existing theories, support the development of new models and theories, and provide in-depth descriptions of particular settings or experiences.

The following six steps provide a guideline for how to conduct qualitative content analysis.

• Define a Research Question : To start content analysis, a clear research question should be developed.
• Identify and Collect Data : Establish the inclusion criteria for your data. Find the relevant sources to analyze.
• Define the Unit or Theme of Analysis : Categorize the content into themes. Themes can be a word, phrase, or sentence.
• Develop Rules for Coding your Data : Define a set of coding rules to ensure that all data are coded consistently.
• Code the Data : Follow the coding rules to categorize data into themes.
• Analyze the Results and Draw Conclusions : Examine the data to identify patterns and draw conclusions in relation to your research question.

Discourse analysis

Discourse analysis is a research method used to study written/ spoken language in relation to its social context (Wood & Kroger, 2000).

In discourse analysis, the researcher interprets details of language materials and the context in which it is situated.

Discourse analysis aims to understand the functions of language (how language is used in real life) and how meaning is conveyed by language in different contexts. Researchers use discourse analysis to investigate social groups and how language is used to achieve specific communication goals.

Different methods of discourse analysis can be used depending on the aims and objectives of a study. However, the following steps provide a guideline on how to conduct discourse analysis.

• Define the Research Question : Develop a relevant research question to frame the analysis.
• Gather Data and Establish the Context : Collect research materials (e.g., interview transcripts, documents). Gather factual details and review the literature to construct a theory about the social and historical context of your study.
• Analyze the Content : Closely examine various components of the text, such as the vocabulary, sentences, paragraphs, and structure of the text. Identify patterns relevant to the research question to create codes, then group these into themes.
• Review the Results : Reflect on the findings to examine the function of the language, and the meaning and context of the discourse. 

Thematic analysis

Thematic analysis is a method used to identify, interpret, and report patterns in data, such as commonalities or contrasts. 

Although the origin of thematic analysis can be traced back to the early twentieth century, understanding and clarity of thematic analysis is attributed to Braun and Clarke (2006).

Thematic analysis aims to develop themes (patterns of meaning) across a dataset to address a research question. 

In thematic analysis, qualitative data is gathered using techniques such as interviews, focus groups, and questionnaires. Audio recordings are transcribed. The dataset is then explored and interpreted by a researcher to identify patterns. 

This occurs through the rigorous process of data familiarisation, coding, theme development, and revision. These identified patterns provide a summary of the dataset and can be used to address a research question.

Themes are developed by exploring the implicit and explicit meanings within the data. Two different approaches are used to generate themes: inductive and deductive. 

An inductive approach allows themes to emerge from the data. In contrast, a deductive approach uses existing theories or knowledge to apply preconceived ideas to the data.

Phases of Thematic Analysis

Braun and Clarke (2006) provide a guide of the six phases of thematic analysis. These phases can be applied flexibly to fit research questions and data. 

Template analysis

Template analysis refers to a specific method of thematic analysis which uses hierarchical coding (Brooks et al., 2014).

Template analysis is used to analyze textual data, for example, interview transcripts or open-ended responses on a written questionnaire.

To conduct template analysis, a coding template must be developed (usually from a subset of the data) and subsequently revised and refined. This template represents the themes identified by researchers as important in the dataset. 

Codes are ordered hierarchically within the template, with the highest-level codes demonstrating overarching themes in the data and lower-level codes representing constituent themes with a narrower focus.

A guideline for the main procedural steps for conducting template analysis is outlined below.

• Familiarization with the Data : Read (and reread) the dataset in full. Engage, reflect, and take notes on data that may be relevant to the research question.
• Preliminary Coding : Identify initial codes using guidance from the a priori codes, identified before the analysis as likely to be beneficial and relevant to the analysis.
• Organize Themes : Organize themes into meaningful clusters. Consider the relationships between the themes both within and between clusters.
• Produce an Initial Template : Develop an initial template. This may be based on a subset of the data.
• Apply and Develop the Template : Apply the initial template to further data and make any necessary modifications. Refinements of the template may include adding themes, removing themes, or changing the scope/title of themes. 
• Finalize Template : Finalize the template, then apply it to the entire dataset. 

Frame analysis

Frame analysis is a comparative form of thematic analysis which systematically analyzes data using a matrix output.

Ritchie and Spencer (1994) developed this set of techniques to analyze qualitative data in applied policy research. Frame analysis aims to generate theory from data.

Frame analysis encourages researchers to organize and manage their data using summarization.

This results in a flexible and unique matrix output, in which individual participants (or cases) are represented by rows and themes are represented by columns. 

Each intersecting cell is used to summarize findings relating to the corresponding participant and theme.

Frame analysis has five distinct phases which are interrelated, forming a methodical and rigorous framework.

• Familiarization with the Data : Familiarize yourself with all the transcripts. Immerse yourself in the details of each transcript and start to note recurring themes.
• Develop a Theoretical Framework : Identify recurrent/ important themes and add them to a chart. Provide a framework/ structure for the analysis.
• Indexing : Apply the framework systematically to the entire study data.
• Summarize Data in Analytical Framework : Reduce the data into brief summaries of participants’ accounts.
• Mapping and Interpretation : Compare themes and subthemes and check against the original transcripts. Group the data into categories and provide an explanation for them.

Preventing Bias in Qualitative Research

To evaluate qualitative studies, the CASP (Critical Appraisal Skills Programme) checklist for qualitative studies can be used to ensure all aspects of a study have been considered (CASP, 2018).

The quality of research can be enhanced and assessed using criteria such as checklists, reflexivity, co-coding, and member-checking. 

Co-coding 

Relying on only one researcher to interpret rich and complex data may risk key insights and alternative viewpoints being missed. Therefore, coding is often performed by multiple researchers.

A common strategy must be defined at the beginning of the coding process  (Busetto et al., 2020). This includes establishing a useful coding list and finding a common definition of individual codes.

Transcripts are initially coded independently by researchers and then compared and consolidated to minimize error or bias and to bring confirmation of findings. 

Member checking

Member checking (or respondent validation) involves checking back with participants to see if the research resonates with their experiences (Russell & Gregory, 2003).

Data can be returned to participants after data collection or when results are first available. For example, participants may be provided with their interview transcript and asked to verify whether this is a complete and accurate representation of their views.

Participants may then clarify or elaborate on their responses to ensure they align with their views (Shenton, 2004).

This feedback becomes part of data collection and ensures accurate descriptions/ interpretations of phenomena (Mays & Pope, 2000). 

Reflexivity in qualitative research

Reflexivity typically involves examining your own judgments, practices, and belief systems during data collection and analysis. It aims to identify any personal beliefs which may affect the research. 

Reflexivity is essential in qualitative research to ensure methodological transparency and complete reporting. This enables readers to understand how the interaction between the researcher and participant shapes the data.

Depending on the research question and population being researched, factors that need to be considered include the experience of the researcher, how the contact was established and maintained, age, gender, and ethnicity.

These details are important because, in qualitative research, the researcher is a dynamic part of the research process and actively influences the outcome of the research (Boeije, 2014). 

Reflexivity Example

Who you are and your characteristics influence how you collect and analyze data. Here is an example of a reflexivity statement for research on smoking. I am a 30-year-old white female from a middle-class background. I live in the southwest of England and have been educated to master’s level. I have been involved in two research projects on oral health. I have never smoked, but I have witnessed how smoking can cause ill health from my volunteering in a smoking cessation clinic. My research aspirations are to help to develop interventions to help smokers quit.

Establishing Trustworthiness in Qualitative Research

Trustworthiness is a concept used to assess the quality and rigor of qualitative research. Four criteria are used to assess a study’s trustworthiness: credibility, transferability, dependability, and confirmability.

Credibility in Qualitative Research

Credibility refers to how accurately the results represent the reality and viewpoints of the participants.

To establish credibility in research, participants’ views and the researcher’s representation of their views need to align (Tobin & Begley, 2004).

To increase the credibility of findings, researchers may use data source triangulation, investigator triangulation, peer debriefing, or member checking (Lincoln & Guba, 1985). 

Transferability in Qualitative Research

Transferability refers to how generalizable the findings are: whether the findings may be applied to another context, setting, or group (Tobin & Begley, 2004).

Transferability can be enhanced by giving thorough and in-depth descriptions of the research setting, sample, and methods (Nowell et al., 2017). 

Dependability in Qualitative Research

Dependability is the extent to which the study could be replicated under similar conditions and the findings would be consistent.

Researchers can establish dependability using methods such as audit trails so readers can see the research process is logical and traceable (Koch, 1994).

Confirmability in Qualitative Research

Confirmability is concerned with establishing that there is a clear link between the researcher’s interpretations/ findings and the data.

Researchers can achieve confirmability by demonstrating how conclusions and interpretations were arrived at (Nowell et al., 2017).

This enables readers to understand the reasoning behind the decisions made. 

Audit Trails in Qualitative Research

An audit trail provides evidence of the decisions made by the researcher regarding theory, research design, and data collection, as well as the steps they have chosen to manage, analyze, and report data. 

The researcher must provide a clear rationale to demonstrate how conclusions were reached in their study.

A clear description of the research path must be provided to enable readers to trace through the researcher’s logic (Halpren, 1983).

Researchers should maintain records of the raw data, field notes, transcripts, and a reflective journal in order to provide a clear audit trail. 

Discovery of unexpected data

Open-ended questions in qualitative research mean the researcher can probe an interview topic and enable the participant to elaborate on responses in an unrestricted manner.

This allows unexpected data to emerge, which can lead to further research into that topic. 

The exploratory nature of qualitative research helps generate hypotheses that can be tested quantitatively (Busetto et al., 2020).

Flexibility

Data collection and analysis can be modified and adapted to take the research in a different direction if new ideas or patterns emerge in the data.

This enables researchers to investigate new opportunities while firmly maintaining their research goals. 

Naturalistic settings

The behaviors of participants are recorded in real-world settings. Studies that use real-world settings have high ecological validity since participants behave more authentically. 

Limitations

Time-consuming .

Qualitative research results in large amounts of data which often need to be transcribed and analyzed manually.

Even when software is used, transcription can be inaccurate, and using software for analysis can result in many codes which need to be condensed into themes. 

Subjectivity 

The researcher has an integral role in collecting and interpreting qualitative data. Therefore, the conclusions reached are from their perspective and experience.

Consequently, interpretations of data from another researcher may vary greatly. 

Limited generalizability

The aim of qualitative research is to provide a detailed, contextualized understanding of an aspect of the human experience from a relatively small sample size.

Despite rigorous analysis procedures, conclusions drawn cannot be generalized to the wider population since data may be biased or unrepresentative.

Therefore, results are only applicable to a small group of the population. 

Extraneous variables

Qualitative research is often conducted in real-world settings. This may cause results to be unreliable since extraneous variables may affect the data, for example:

• Situational variables : different environmental conditions may influence participants’ behavior in a study. The random variation in factors (such as noise or lighting) may be difficult to control in real-world settings.
• Participant characteristics : this includes any characteristics that may influence how a participant answers/ behaves in a study. This may include a participant’s mood, gender, age, ethnicity, sexual identity, IQ, etc.
• Experimenter effect : experimenter effect refers to how a researcher’s unintentional influence can change the outcome of a study. This occurs when (i) their interactions with participants unintentionally change participants’ behaviors or (ii) due to errors in observation, interpretation, or analysis. 

What sample size should qualitative research be?

The sample size for qualitative studies has been recommended to include a minimum of 12 participants to reach data saturation (Braun, 2013).

Are surveys qualitative or quantitative?

Surveys can be used to gather information from a sample qualitatively or quantitatively. Qualitative surveys use open-ended questions to gather detailed information from a large sample using free text responses.

The use of open-ended questions allows for unrestricted responses where participants use their own words, enabling the collection of more in-depth information than closed-ended questions.

In contrast, quantitative surveys consist of closed-ended questions with multiple-choice answer options. Quantitative surveys are ideal to gather a statistical representation of a population.

What are the ethical considerations of qualitative research?

Before conducting a study, you must think about any risks that could occur and take steps to prevent them. Participant Protection : Researchers must protect participants from physical and mental harm. This means you must not embarrass, frighten, offend, or harm participants. Transparency : Researchers are obligated to clearly communicate how they will collect, store, analyze, use, and share the data. Confidentiality : You need to consider how to maintain the confidentiality and anonymity of participants’ data.

What is triangulation in qualitative research?

Triangulation refers to the use of several approaches in a study to comprehensively understand phenomena. This method helps to increase the validity and credibility of research findings. 

Types of triangulation include method triangulation (using multiple methods to gather data); investigator triangulation (multiple researchers for collecting/ analyzing data), theory triangulation (comparing several theoretical perspectives to explain a phenomenon), and data source triangulation (using data from various times, locations, and people; Carter et al., 2014).

Why is qualitative research important?

Qualitative research allows researchers to describe and explain the social world. The exploratory nature of qualitative research helps to generate hypotheses that can then be tested quantitatively.

In qualitative research, participants are able to express their thoughts, experiences, and feelings without constraint.

Additionally, researchers are able to follow up on participants’ answers in real-time, generating valuable discussion around a topic. This enables researchers to gain a nuanced understanding of phenomena which is difficult to attain using quantitative methods.

What is coding data in qualitative research?

Coding data is a qualitative data analysis strategy in which a section of text is assigned with a label that describes its content.

These labels may be words or phrases which represent important (and recurring) patterns in the data.

This process enables researchers to identify related content across the dataset. Codes can then be used to group similar types of data to generate themes.

What is the difference between qualitative and quantitative research?

Qualitative research involves the collection and analysis of non-numerical data in order to understand experiences and meanings from the participant’s perspective.

This can provide rich, in-depth insights on complicated phenomena. Qualitative data may be collected using interviews, focus groups, or observations.

In contrast, quantitative research involves the collection and analysis of numerical data to measure the frequency, magnitude, or relationships of variables. This can provide objective and reliable evidence that can be generalized to the wider population.

Quantitative data may be collected using closed-ended questionnaires or experiments.

What is trustworthiness in qualitative research?

Trustworthiness is a concept used to assess the quality and rigor of qualitative research. Four criteria are used to assess a study’s trustworthiness: credibility, transferability, dependability, and confirmability. 

Credibility refers to how accurately the results represent the reality and viewpoints of the participants. Transferability refers to whether the findings may be applied to another context, setting, or group.

Dependability is the extent to which the findings are consistent and reliable. Confirmability refers to the objectivity of findings (not influenced by the bias or assumptions of researchers).

What is data saturation in qualitative research?

Data saturation is a methodological principle used to guide the sample size of a qualitative research study.

Data saturation is proposed as a necessary methodological component in qualitative research (Saunders et al., 2018) as it is a vital criterion for discontinuing data collection and/or analysis. 

The intention of data saturation is to find “no new data, no new themes, no new coding, and ability to replicate the study” (Guest et al., 2006). Therefore, enough data has been gathered to make conclusions.

Why is sampling in qualitative research important?

In quantitative research, large sample sizes are used to provide statistically significant quantitative estimates.

This is because quantitative research aims to provide generalizable conclusions that represent populations.

However, the aim of sampling in qualitative research is to gather data that will help the researcher understand the depth, complexity, variation, or context of a phenomenon. The small sample sizes in qualitative studies support the depth of case-oriented analysis.

Boeije, H. (2014). Analysis in qualitative research. Sage.

Braun, V., & Clarke, V. (2006). Using thematic analysis in psychology. Qualitative research in psychology , 3 (2), 77-101. https://doi.org/10.1191/1478088706qp063oa

Brooks, J., McCluskey, S., Turley, E., & King, N. (2014). The utility of template analysis in qualitative psychology research. Qualitative Research in Psychology , 12 (2), 202–222. https://doi.org/10.1080/14780887.2014.955224

Busetto, L., Wick, W., & Gumbinger, C. (2020). How to use and assess qualitative research methods. Neurological research and practice , 2 (1), 14-14. https://doi.org/10.1186/s42466-020-00059-z 

Carter, N., Bryant-Lukosius, D., DiCenso, A., Blythe, J., & Neville, A. J. (2014). The use of triangulation in qualitative research. Oncology nursing forum , 41 (5), 545–547. https://doi.org/10.1188/14.ONF.545-547

Critical Appraisal Skills Programme. (2018). CASP Checklist: 10 questions to help you make sense of a Qualitative research. https://casp-uk.net/images/checklist/documents/CASP-Qualitative-Studies-Checklist/CASP-Qualitative-Checklist-2018_fillable_form.pdf Accessed: March 15 2023

Clarke, V., & Braun, V. (2013). Successful qualitative research: A practical guide for beginners. Successful Qualitative Research , 1-400.

Denny, E., & Weckesser, A. (2022). How to do qualitative research?: Qualitative research methods. BJOG : an international journal of obstetrics and gynaecology , 129 (7), 1166-1167. https://doi.org/10.1111/1471-0528.17150 

Glaser, B. G., & Strauss, A. L. (2017). The discovery of grounded theory. The Discovery of Grounded Theory , 1–18. https://doi.org/10.4324/9780203793206-1

Guest, G., Bunce, A., & Johnson, L. (2006). How many interviews are enough? An experiment with data saturation and variability. Field Methods, 18 (1), 59-82. doi:10.1177/1525822X05279903

Halpren, E. S. (1983). Auditing naturalistic inquiries: The development and application of a model (Unpublished doctoral dissertation). Indiana University, Bloomington.

Hammarberg, K., Kirkman, M., & de Lacey, S. (2016). Qualitative research methods: When to use them and how to judge them. Human Reproduction , 31 (3), 498–501. https://doi.org/10.1093/humrep/dev334

Koch, T. (1994). Establishing rigour in qualitative research: The decision trail. Journal of Advanced Nursing, 19, 976–986. doi:10.1111/ j.1365-2648.1994.tb01177.x

Lincoln, Y., & Guba, E. G. (1985). Naturalistic inquiry. Newbury Park, CA: Sage.

Mays, N., & Pope, C. (2000). Assessing quality in qualitative research. BMJ, 320(7226), 50–52.

Minichiello, V. (1990). In-Depth Interviewing: Researching People. Longman Cheshire.

Nowell, L. S., Norris, J. M., White, D. E., & Moules, N. J. (2017). Thematic Analysis: Striving to Meet the Trustworthiness Criteria. International Journal of Qualitative Methods, 16 (1). https://doi.org/10.1177/1609406917733847

Petty, N. J., Thomson, O. P., & Stew, G. (2012). Ready for a paradigm shift? part 2: Introducing qualitative research methodologies and methods. Manual Therapy , 17 (5), 378–384. https://doi.org/10.1016/j.math.2012.03.004

Punch, K. F. (2013). Introduction to social research: Quantitative and qualitative approaches. London: Sage

Reeves, S., Kuper, A., & Hodges, B. D. (2008). Qualitative research methodologies: Ethnography. BMJ , 337 (aug07 3). https://doi.org/10.1136/bmj.a1020

Russell, C. K., & Gregory, D. M. (2003). Evaluation of qualitative research studies. Evidence Based Nursing, 6 (2), 36–40.

Saunders, B., Sim, J., Kingstone, T., Baker, S., Waterfield, J., Bartlam, B., Burroughs, H., & Jinks, C. (2018). Saturation in qualitative research: exploring its conceptualization and operationalization. Quality & quantity , 52 (4), 1893–1907. https://doi.org/10.1007/s11135-017-0574-8

Scarduzio, J. A. (2017). Emic approach to qualitative research. The International Encyclopedia of Communication Research Methods, 1–2 . https://doi.org/10.1002/9781118901731.iecrm0082

Schreier, M. (2012). Qualitative content analysis in practice / Margrit Schreier.

Shenton, A. K. (2004). Strategies for ensuring trustworthiness in qualitative research projects. Education for Information, 22 , 63–75.

Starks, H., & Trinidad, S. B. (2007). Choose your method: a comparison of phenomenology, discourse analysis, and grounded theory. Qualitative health research , 17 (10), 1372–1380. https://doi.org/10.1177/1049732307307031

Tenny, S., Brannan, J. M., & Brannan, G. D. (2022). Qualitative Study. In StatPearls. StatPearls Publishing.

Tobin, G. A., & Begley, C. M. (2004). Methodological rigour within a qualitative framework. Journal of Advanced Nursing, 48, 388–396. doi:10.1111/j.1365-2648.2004.03207.x

Vaismoradi, M., Turunen, H., & Bondas, T. (2013). Content analysis and thematic analysis: Implications for conducting a qualitative descriptive study. Nursing & health sciences , 15 (3), 398-405. https://doi.org/10.1111/nhs.12048

Wood L. A., Kroger R. O. (2000). Doing discourse analysis: Methods for studying action in talk and text. Sage.

Yilmaz, K. (2013). Comparison of Quantitative and Qualitative Research Traditions: epistemological, theoretical, and methodological differences. European journal of education , 48 (2), 311-325. https://doi.org/10.1111/ejed.12014

Related Articles

Research Methodology

Qualitative Data Coding

What Is a Focus Group?

Cross-Cultural Research Methodology In Psychology

What Is Internal Validity In Research?

Research Methodology , Statistics

What Is Face Validity In Research? Importance & How To Measure

Criterion Validity: Definition & Examples

Chapter 5. Sampling

Introduction.

Most Americans will experience unemployment at some point in their lives. Sarah Damaske ( 2021 ) was interested in learning about how men and women experience unemployment differently. To answer this question, she interviewed unemployed people. After conducting a “pilot study” with twenty interviewees, she realized she was also interested in finding out how working-class and middle-class persons experienced unemployment differently. She found one hundred persons through local unemployment offices. She purposefully selected a roughly equal number of men and women and working-class and middle-class persons for the study. This would allow her to make the kinds of comparisons she was interested in. She further refined her selection of persons to interview:

I decided that I needed to be able to focus my attention on gender and class; therefore, I interviewed only people born between 1962 and 1987 (ages 28–52, the prime working and child-rearing years), those who worked full-time before their job loss, those who experienced an involuntary job loss during the past year, and those who did not lose a job for cause (e.g., were not fired because of their behavior at work). ( 244 )

The people she ultimately interviewed compose her sample. They represent (“sample”) the larger population of the involuntarily unemployed. This “theoretically informed stratified sampling design” allowed Damaske “to achieve relatively equal distribution of participation across gender and class,” but it came with some limitations. For one, the unemployment centers were located in primarily White areas of the country, so there were very few persons of color interviewed. Qualitative researchers must make these kinds of decisions all the time—who to include and who not to include. There is never an absolutely correct decision, as the choice is linked to the particular research question posed by the particular researcher, although some sampling choices are more compelling than others. In this case, Damaske made the choice to foreground both gender and class rather than compare all middle-class men and women or women of color from different class positions or just talk to White men. She leaves the door open for other researchers to sample differently. Because science is a collective enterprise, it is most likely someone will be inspired to conduct a similar study as Damaske’s but with an entirely different sample.

This chapter is all about sampling. After you have developed a research question and have a general idea of how you will collect data (observations or interviews), how do you go about actually finding people and sites to study? Although there is no “correct number” of people to interview, the sample should follow the research question and research design. You might remember studying sampling in a quantitative research course. Sampling is important here too, but it works a bit differently. Unlike quantitative research, qualitative research involves nonprobability sampling. This chapter explains why this is so and what qualities instead make a good sample for qualitative research.

Quick Terms Refresher

• The population is the entire group that you want to draw conclusions about.
• The sample is the specific group of individuals that you will collect data from.
• Sampling frame is the actual list of individuals that the sample will be drawn from. Ideally, it should include the entire target population (and nobody who is not part of that population).
• Sample size is how many individuals (or units) are included in your sample.

The “Who” of Your Research Study

After you have turned your general research interest into an actual research question and identified an approach you want to take to answer that question, you will need to specify the people you will be interviewing or observing. In most qualitative research, the objects of your study will indeed be people. In some cases, however, your objects might be content left by people (e.g., diaries, yearbooks, photographs) or documents (official or unofficial) or even institutions (e.g., schools, medical centers) and locations (e.g., nation-states, cities). Chances are, whatever “people, places, or things” are the objects of your study, you will not really be able to talk to, observe, or follow every single individual/object of the entire population of interest. You will need to create a sample of the population . Sampling in qualitative research has different purposes and goals than sampling in quantitative research. Sampling in both allows you to say something of interest about a population without having to include the entire population in your sample.

We begin this chapter with the case of a population of interest composed of actual people. After we have a better understanding of populations and samples that involve real people, we’ll discuss sampling in other types of qualitative research, such as archival research, content analysis, and case studies. We’ll then move to a larger discussion about the difference between sampling in qualitative research generally versus quantitative research, then we’ll move on to the idea of “theoretical” generalizability, and finally, we’ll conclude with some practical tips on the correct “number” to include in one’s sample.

Sampling People

To help think through samples, let’s imagine we want to know more about “vaccine hesitancy.” We’ve all lived through 2020 and 2021, and we know that a sizable number of people in the United States (and elsewhere) were slow to accept vaccines, even when these were freely available. By some accounts, about one-third of Americans initially refused vaccination. Why is this so? Well, as I write this in the summer of 2021, we know that some people actively refused the vaccination, thinking it was harmful or part of a government plot. Others were simply lazy or dismissed the necessity. And still others were worried about harmful side effects. The general population of interest here (all adult Americans who were not vaccinated by August 2021) may be as many as eighty million people. We clearly cannot talk to all of them. So we will have to narrow the number to something manageable. How can we do this?

First, we have to think about our actual research question and the form of research we are conducting. I am going to begin with a quantitative research question. Quantitative research questions tend to be simpler to visualize, at least when we are first starting out doing social science research. So let us say we want to know what percentage of each kind of resistance is out there and how race or class or gender affects vaccine hesitancy. Again, we don’t have the ability to talk to everyone. But harnessing what we know about normal probability distributions (see quantitative methods for more on this), we can find this out through a sample that represents the general population. We can’t really address these particular questions if we only talk to White women who go to college with us. And if you are really trying to generalize the specific findings of your sample to the larger population, you will have to employ probability sampling , a sampling technique where a researcher sets a selection of a few criteria and chooses members of a population randomly. Why randomly? If truly random, all the members have an equal opportunity to be a part of the sample, and thus we avoid the problem of having only our friends and neighbors (who may be very different from other people in the population) in the study. Mathematically, there is going to be a certain number that will be large enough to allow us to generalize our particular findings from our sample population to the population at large. It might surprise you how small that number can be. Election polls of no more than one thousand people are routinely used to predict actual election outcomes of millions of people. Below that number, however, you will not be able to make generalizations. Talking to five people at random is simply not enough people to predict a presidential election.

In order to answer quantitative research questions of causality, one must employ probability sampling. Quantitative researchers try to generalize their findings to a larger population. Samples are designed with that in mind. Qualitative researchers ask very different questions, though. Qualitative research questions are not about “how many” of a certain group do X (in this case, what percentage of the unvaccinated hesitate for concern about safety rather than reject vaccination on political grounds). Qualitative research employs nonprobability sampling . By definition, not everyone has an equal opportunity to be included in the sample. The researcher might select White women they go to college with to provide insight into racial and gender dynamics at play. Whatever is found by doing so will not be generalizable to everyone who has not been vaccinated, or even all White women who have not been vaccinated, or even all White women who have not been vaccinated who are in this particular college. That is not the point of qualitative research at all. This is a really important distinction, so I will repeat in bold: Qualitative researchers are not trying to statistically generalize specific findings to a larger population . They have not failed when their sample cannot be generalized, as that is not the point at all.

In the previous paragraph, I said it would be perfectly acceptable for a qualitative researcher to interview five White women with whom she goes to college about their vaccine hesitancy “to provide insight into racial and gender dynamics at play.” The key word here is “insight.” Rather than use a sample as a stand-in for the general population, as quantitative researchers do, the qualitative researcher uses the sample to gain insight into a process or phenomenon. The qualitative researcher is not going to be content with simply asking each of the women to state her reason for not being vaccinated and then draw conclusions that, because one in five of these women were concerned about their health, one in five of all people were also concerned about their health. That would be, frankly, a very poor study indeed. Rather, the qualitative researcher might sit down with each of the women and conduct a lengthy interview about what the vaccine means to her, why she is hesitant, how she manages her hesitancy (how she explains it to her friends), what she thinks about others who are unvaccinated, what she thinks of those who have been vaccinated, and what she knows or thinks she knows about COVID-19. The researcher might include specific interview questions about the college context, about their status as White women, about the political beliefs they hold about racism in the US, and about how their own political affiliations may or may not provide narrative scripts about “protective whiteness.” There are many interesting things to ask and learn about and many things to discover. Where a quantitative researcher begins with clear parameters to set their population and guide their sample selection process, the qualitative researcher is discovering new parameters, making it impossible to engage in probability sampling.

Looking at it this way, sampling for qualitative researchers needs to be more strategic. More theoretically informed. What persons can be interviewed or observed that would provide maximum insight into what is still unknown? In other words, qualitative researchers think through what cases they could learn the most from, and those are the cases selected to study: “What would be ‘bias’ in statistical sampling, and therefore a weakness, becomes intended focus in qualitative sampling, and therefore a strength. The logic and power of purposeful sampling like in selecting information-rich cases for study in depth. Information-rich cases are those from which one can learn a great deal about issues of central importance to the purpose of the inquiry, thus the term purposeful sampling” ( Patton 2002:230 ; emphases in the original).

Before selecting your sample, though, it is important to clearly identify the general population of interest. You need to know this before you can determine the sample. In our example case, it is “adult Americans who have not yet been vaccinated.” Depending on the specific qualitative research question, however, it might be “adult Americans who have been vaccinated for political reasons” or even “college students who have not been vaccinated.” What insights are you seeking? Do you want to know how politics is affecting vaccination? Or do you want to understand how people manage being an outlier in a particular setting (unvaccinated where vaccinations are heavily encouraged if not required)? More clearly stated, your population should align with your research question . Think back to the opening story about Damaske’s work studying the unemployed. She drew her sample narrowly to address the particular questions she was interested in pursuing. Knowing your questions or, at a minimum, why you are interested in the topic will allow you to draw the best sample possible to achieve insight.

Once you have your population in mind, how do you go about getting people to agree to be in your sample? In qualitative research, it is permissible to find people by convenience. Just ask for people who fit your sample criteria and see who shows up. Or reach out to friends and colleagues and see if they know anyone that fits. Don’t let the name convenience sampling mislead you; this is not exactly “easy,” and it is certainly a valid form of sampling in qualitative research. The more unknowns you have about what you will find, the more convenience sampling makes sense. If you don’t know how race or class or political affiliation might matter, and your population is unvaccinated college students, you can construct a sample of college students by placing an advertisement in the student paper or posting a flyer on a notice board. Whoever answers is your sample. That is what is meant by a convenience sample. A common variation of convenience sampling is snowball sampling . This is particularly useful if your target population is hard to find. Let’s say you posted a flyer about your study and only two college students responded. You could then ask those two students for referrals. They tell their friends, and those friends tell other friends, and, like a snowball, your sample gets bigger and bigger.

Researcher Note

Gaining Access: When Your Friend Is Your Research Subject

My early experience with qualitative research was rather unique. At that time, I needed to do a project that required me to interview first-generation college students, and my friends, with whom I had been sharing a dorm for two years, just perfectly fell into the sample category. Thus, I just asked them and easily “gained my access” to the research subject; I know them, we are friends, and I am part of them. I am an insider. I also thought, “Well, since I am part of the group, I can easily understand their language and norms, I can capture their honesty, read their nonverbal cues well, will get more information, as they will be more opened to me because they trust me.” All in all, easy access with rich information. But, gosh, I did not realize that my status as an insider came with a price! When structuring the interview questions, I began to realize that rather than focusing on the unique experiences of my friends, I mostly based the questions on my own experiences, assuming we have similar if not the same experiences. I began to struggle with my objectivity and even questioned my role; am I doing this as part of the group or as a researcher? I came to know later that my status as an insider or my “positionality” may impact my research. It not only shapes the process of data collection but might heavily influence my interpretation of the data. I came to realize that although my inside status came with a lot of benefits (especially for access), it could also bring some drawbacks.

—Dede Setiono, PhD student focusing on international development and environmental policy, Oregon State University

The more you know about what you might find, the more strategic you can be. If you wanted to compare how politically conservative and politically liberal college students explained their vaccine hesitancy, for example, you might construct a sample purposively, finding an equal number of both types of students so that you can make those comparisons in your analysis. This is what Damaske ( 2021 ) did. You could still use convenience or snowball sampling as a way of recruitment. Post a flyer at the conservative student club and then ask for referrals from the one student that agrees to be interviewed. As with convenience sampling, there are variations of purposive sampling as well as other names used (e.g., judgment, quota, stratified, criterion, theoretical). Try not to get bogged down in the nomenclature; instead, focus on identifying the general population that matches your research question and then using a sampling method that is most likely to provide insight, given the types of questions you have.

There are all kinds of ways of being strategic with sampling in qualitative research. Here are a few of my favorite techniques for maximizing insight:

• Consider using “extreme” or “deviant” cases. Maybe your college houses a prominent anti-vaxxer who has written about and demonstrated against the college’s policy on vaccines. You could learn a lot from that single case (depending on your research question, of course).
• Consider “intensity”: people and cases and circumstances where your questions are more likely to feature prominently (but not extremely or deviantly). For example, you could compare those who volunteer at local Republican and Democratic election headquarters during an election season in a study on why party matters. Those who volunteer are more likely to have something to say than those who are more apathetic.
• Maximize variation, as with the case of “politically liberal” versus “politically conservative,” or include an array of social locations (young vs. old; Northwest vs. Southeast region). This kind of heterogeneity sampling can capture and describe the central themes that cut across the variations: any common patterns that emerge, even in this wildly mismatched sample, are probably important to note!
• Rather than maximize the variation, you could select a small homogenous sample to describe some particular subgroup in depth. Focus groups are often the best form of data collection for homogeneity sampling.
• Think about which cases are “critical” or politically important—ones that “if it happens here, it would happen anywhere” or a case that is politically sensitive, as with the single “blue” (Democratic) county in a “red” (Republican) state. In both, you are choosing a site that would yield the most information and have the greatest impact on the development of knowledge.
• On the other hand, sometimes you want to select the “typical”—the typical college student, for example. You are trying to not generalize from the typical but illustrate aspects that may be typical of this case or group. When selecting for typicality, be clear with yourself about why the typical matches your research questions (and who might be excluded or marginalized in doing so).
• Finally, it is often a good idea to look for disconfirming cases : if you are at the stage where you have a hypothesis (of sorts), you might select those who do not fit your hypothesis—you will surely learn something important there. They may be “exceptions that prove the rule” or exceptions that force you to alter your findings in order to make sense of these additional cases.

In addition to all these sampling variations, there is the theoretical approach taken by grounded theorists in which the researcher samples comparative people (or events) on the basis of their potential to represent important theoretical constructs. The sample, one can say, is by definition representative of the phenomenon of interest. It accompanies the constant comparative method of analysis. In the words of the funders of Grounded Theory , “Theoretical sampling is sampling on the basis of the emerging concepts, with the aim being to explore the dimensional range or varied conditions along which the properties of the concepts vary” ( Strauss and Corbin 1998:73 ).

When Your Population is Not Composed of People

I think it is easiest for most people to think of populations and samples in terms of people, but sometimes our units of analysis are not actually people. They could be places or institutions. Even so, you might still want to talk to people or observe the actions of people to understand those places or institutions. Or not! In the case of content analyses (see chapter 17), you won’t even have people involved at all but rather documents or films or photographs or news clippings. Everything we have covered about sampling applies to other units of analysis too. Let’s work through some examples.

Case Studies

When constructing a case study, it is helpful to think of your cases as sample populations in the same way that we considered people above. If, for example, you are comparing campus climates for diversity, your overall population may be “four-year college campuses in the US,” and from there you might decide to study three college campuses as your sample. Which three? Will you use purposeful sampling (perhaps [1] selecting three colleges in Oregon that are different sizes or [2] selecting three colleges across the US located in different political cultures or [3] varying the three colleges by racial makeup of the student body)? Or will you select three colleges at random, out of convenience? There are justifiable reasons for all approaches.

As with people, there are different ways of maximizing insight in your sample selection. Think about the following rationales: typical, diverse, extreme, deviant, influential, crucial, or even embodying a particular “pathway” ( Gerring 2008 ). When choosing a case or particular research site, Rubin ( 2021 ) suggests you bear in mind, first, what you are leaving out by selecting this particular case/site; second, what you might be overemphasizing by studying this case/site and not another; and, finally, whether you truly need to worry about either of those things—“that is, what are the sources of bias and how bad are they for what you are trying to do?” ( 89 ).

Once you have selected your cases, you may still want to include interviews with specific people or observations at particular sites within those cases. Then you go through possible sampling approaches all over again to determine which people will be contacted.

Content: Documents, Narrative Accounts, And So On

Although not often discussed as sampling, your selection of documents and other units to use in various content/historical analyses is subject to similar considerations. When you are asking quantitative-type questions (percentages and proportionalities of a general population), you will want to follow probabilistic sampling. For example, I created a random sample of accounts posted on the website studentloanjustice.org to delineate the types of problems people were having with student debt ( Hurst 2007 ). Even though my data was qualitative (narratives of student debt), I was actually asking a quantitative-type research question, so it was important that my sample was representative of the larger population (debtors who posted on the website). On the other hand, when you are asking qualitative-type questions, the selection process should be very different. In that case, use nonprobabilistic techniques, either convenience (where you are really new to this data and do not have the ability to set comparative criteria or even know what a deviant case would be) or some variant of purposive sampling. Let’s say you were interested in the visual representation of women in media published in the 1950s. You could select a national magazine like Time for a “typical” representation (and for its convenience, as all issues are freely available on the web and easy to search). Or you could compare one magazine known for its feminist content versus one antifeminist. The point is, sample selection is important even when you are not interviewing or observing people.

Goals of Qualitative Sampling versus Goals of Quantitative Sampling

We have already discussed some of the differences in the goals of quantitative and qualitative sampling above, but it is worth further discussion. The quantitative researcher seeks a sample that is representative of the population of interest so that they may properly generalize the results (e.g., if 80 percent of first-gen students in the sample were concerned with costs of college, then we can say there is a strong likelihood that 80 percent of first-gen students nationally are concerned with costs of college). The qualitative researcher does not seek to generalize in this way . They may want a representative sample because they are interested in typical responses or behaviors of the population of interest, but they may very well not want a representative sample at all. They might want an “extreme” or deviant case to highlight what could go wrong with a particular situation, or maybe they want to examine just one case as a way of understanding what elements might be of interest in further research. When thinking of your sample, you will have to know why you are selecting the units, and this relates back to your research question or sets of questions. It has nothing to do with having a representative sample to generalize results. You may be tempted—or it may be suggested to you by a quantitatively minded member of your committee—to create as large and representative a sample as you possibly can to earn credibility from quantitative researchers. Ignore this temptation or suggestion. The only thing you should be considering is what sample will best bring insight into the questions guiding your research. This has implications for the number of people (or units) in your study as well, which is the topic of the next section.

What is the Correct “Number” to Sample?

Because we are not trying to create a generalizable representative sample, the guidelines for the “number” of people to interview or news stories to code are also a bit more nebulous. There are some brilliant insightful studies out there with an n of 1 (meaning one person or one account used as the entire set of data). This is particularly so in the case of autoethnography, a variation of ethnographic research that uses the researcher’s own subject position and experiences as the basis of data collection and analysis. But it is true for all forms of qualitative research. There are no hard-and-fast rules here. The number to include is what is relevant and insightful to your particular study.

That said, humans do not thrive well under such ambiguity, and there are a few helpful suggestions that can be made. First, many qualitative researchers talk about “saturation” as the end point for data collection. You stop adding participants when you are no longer getting any new information (or so very little that the cost of adding another interview subject or spending another day in the field exceeds any likely benefits to the research). The term saturation was first used here by Glaser and Strauss ( 1967 ), the founders of Grounded Theory. Here is their explanation: “The criterion for judging when to stop sampling the different groups pertinent to a category is the category’s theoretical saturation . Saturation means that no additional data are being found whereby the sociologist can develop properties of the category. As he [or she] sees similar instances over and over again, the researcher becomes empirically confident that a category is saturated. [They go] out of [their] way to look for groups that stretch diversity of data as far as possible, just to make certain that saturation is based on the widest possible range of data on the category” ( 61 ).

It makes sense that the term was developed by grounded theorists, since this approach is rather more open-ended than other approaches used by qualitative researchers. With so much left open, having a guideline of “stop collecting data when you don’t find anything new” is reasonable. However, saturation can’t help much when first setting out your sample. How do you know how many people to contact to interview? What number will you put down in your institutional review board (IRB) protocol (see chapter 8)? You may guess how many people or units it will take to reach saturation, but there really is no way to know in advance. The best you can do is think about your population and your questions and look at what others have done with similar populations and questions.

Here are some suggestions to use as a starting point: For phenomenological studies, try to interview at least ten people for each major category or group of people . If you are comparing male-identified, female-identified, and gender-neutral college students in a study on gender regimes in social clubs, that means you might want to design a sample of thirty students, ten from each group. This is the minimum suggested number. Damaske’s ( 2021 ) sample of one hundred allows room for up to twenty-five participants in each of four “buckets” (e.g., working-class*female, working-class*male, middle-class*female, middle-class*male). If there is more than one comparative group (e.g., you are comparing students attending three different colleges, and you are comparing White and Black students in each), you can sometimes reduce the number for each group in your sample to five for, in this case, thirty total students. But that is really a bare minimum you will want to go. A lot of people will not trust you with only “five” cases in a bucket. Lareau ( 2021:24 ) advises a minimum of seven or nine for each bucket (or “cell,” in her words). The point is to think about what your analyses might look like and how comfortable you will be with a certain number of persons fitting each category.

Because qualitative research takes so much time and effort, it is rare for a beginning researcher to include more than thirty to fifty people or units in the study. You may not be able to conduct all the comparisons you might want simply because you cannot manage a larger sample. In that case, the limits of who you can reach or what you can include may influence you to rethink an original overcomplicated research design. Rather than include students from every racial group on a campus, for example, you might want to sample strategically, thinking about the most contrast (insightful), possibly excluding majority-race (White) students entirely, and simply using previous literature to fill in gaps in our understanding. For example, one of my former students was interested in discovering how race and class worked at a predominantly White institution (PWI). Due to time constraints, she simplified her study from an original sample frame of middle-class and working-class domestic Black and international African students (four buckets) to a sample frame of domestic Black and international African students (two buckets), allowing the complexities of class to come through individual accounts rather than from part of the sample frame. She wisely decided not to include White students in the sample, as her focus was on how minoritized students navigated the PWI. She was able to successfully complete her project and develop insights from the data with fewer than twenty interviewees. [1]

But what if you had unlimited time and resources? Would it always be better to interview more people or include more accounts, documents, and units of analysis? No! Your sample size should reflect your research question and the goals you have set yourself. Larger numbers can sometimes work against your goals. If, for example, you want to help bring out individual stories of success against the odds, adding more people to the analysis can end up drowning out those individual stories. Sometimes, the perfect size really is one (or three, or five). It really depends on what you are trying to discover and achieve in your study. Furthermore, studies of one hundred or more (people, documents, accounts, etc.) can sometimes be mistaken for quantitative research. Inevitably, the large sample size will push the researcher into simplifying the data numerically. And readers will begin to expect generalizability from such a large sample.

To summarize, “There are no rules for sample size in qualitative inquiry. Sample size depends on what you want to know, the purpose of the inquiry, what’s at stake, what will be useful, what will have credibility, and what can be done with available time and resources” ( Patton 2002:244 ).

How did you find/construct a sample?

Since qualitative researchers work with comparatively small sample sizes, getting your sample right is rather important. Yet it is also difficult to accomplish. For instance, a key question you need to ask yourself is whether you want a homogeneous or heterogeneous sample. In other words, do you want to include people in your study who are by and large the same, or do you want to have diversity in your sample?

For many years, I have studied the experiences of students who were the first in their families to attend university. There is a rather large number of sampling decisions I need to consider before starting the study. (1) Should I only talk to first-in-family students, or should I have a comparison group of students who are not first-in-family? (2) Do I need to strive for a gender distribution that matches undergraduate enrollment patterns? (3) Should I include participants that reflect diversity in gender identity and sexuality? (4) How about racial diversity? First-in-family status is strongly related to some ethnic or racial identity. (5) And how about areas of study?

As you can see, if I wanted to accommodate all these differences and get enough study participants in each category, I would quickly end up with a sample size of hundreds, which is not feasible in most qualitative research. In the end, for me, the most important decision was to maximize the voices of first-in-family students, which meant that I only included them in my sample. As for the other categories, I figured it was going to be hard enough to find first-in-family students, so I started recruiting with an open mind and an understanding that I may have to accept a lack of gender, sexuality, or racial diversity and then not be able to say anything about these issues. But I would definitely be able to speak about the experiences of being first-in-family.

—Wolfgang Lehmann, author of “Habitus Transformation and Hidden Injuries”

Examples of “Sample” Sections in Journal Articles

Think about some of the studies you have read in college, especially those with rich stories and accounts about people’s lives. Do you know how the people were selected to be the focus of those stories? If the account was published by an academic press (e.g., University of California Press or Princeton University Press) or in an academic journal, chances are that the author included a description of their sample selection. You can usually find these in a methodological appendix (book) or a section on “research methods” (article).

Here are two examples from recent books and one example from a recent article:

Example 1 . In It’s Not like I’m Poor: How Working Families Make Ends Meet in a Post-welfare World , the research team employed a mixed methods approach to understand how parents use the earned income tax credit, a refundable tax credit designed to provide relief for low- to moderate-income working people ( Halpern-Meekin et al. 2015 ). At the end of their book, their first appendix is “Introduction to Boston and the Research Project.” After describing the context of the study, they include the following description of their sample selection:

In June 2007, we drew 120 names at random from the roughly 332 surveys we gathered between February and April. Within each racial and ethnic group, we aimed for one-third married couples with children and two-thirds unmarried parents. We sent each of these families a letter informing them of the opportunity to participate in the in-depth portion of our study and then began calling the home and cell phone numbers they provided us on the surveys and knocking on the doors of the addresses they provided.…In the end, we interviewed 115 of the 120 families originally selected for the in-depth interview sample (the remaining five families declined to participate). ( 22 )

Was their sample selection based on convenience or purpose? Why do you think it was important for them to tell you that five families declined to be interviewed? There is actually a trick here, as the names were pulled randomly from a survey whose sample design was probabilistic. Why is this important to know? What can we say about the representativeness or the uniqueness of whatever findings are reported here?

Example 2 . In When Diversity Drops , Park ( 2013 ) examines the impact of decreasing campus diversity on the lives of college students. She does this through a case study of one student club, the InterVarsity Christian Fellowship (IVCF), at one university (“California University,” a pseudonym). Here is her description:

I supplemented participant observation with individual in-depth interviews with sixty IVCF associates, including thirty-four current students, eight former and current staff members, eleven alumni, and seven regional or national staff members. The racial/ethnic breakdown was twenty-five Asian Americans (41.6 percent), one Armenian (1.6 percent), twelve people who were black (20.0 percent), eight Latino/as (13.3 percent), three South Asian Americans (5.0 percent), and eleven people who were white (18.3 percent). Twenty-nine were men, and thirty-one were women. Looking back, I note that the higher number of Asian Americans reflected both the group’s racial/ethnic composition and my relative ease about approaching them for interviews. ( 156 )

How can you tell this is a convenience sample? What else do you note about the sample selection from this description?

Example 3. The last example is taken from an article published in the journal Research in Higher Education . Published articles tend to be more formal than books, at least when it comes to the presentation of qualitative research. In this article, Lawson ( 2021 ) is seeking to understand why female-identified college students drop out of majors that are dominated by male-identified students (e.g., engineering, computer science, music theory). Here is the entire relevant section of the article:

Method Participants Data were collected as part of a larger study designed to better understand the daily experiences of women in MDMs [male-dominated majors].…Participants included 120 students from a midsize, Midwestern University. This sample included 40 women and 40 men from MDMs—defined as any major where at least 2/3 of students are men at both the university and nationally—and 40 women from GNMs—defined as any may where 40–60% of students are women at both the university and nationally.… Procedure A multi-faceted approach was used to recruit participants; participants were sent targeted emails (obtained based on participants’ reported gender and major listings), campus-wide emails sent through the University’s Communication Center, flyers, and in-class presentations. Recruitment materials stated that the research focused on the daily experiences of college students, including classroom experiences, stressors, positive experiences, departmental contexts, and career aspirations. Interested participants were directed to email the study coordinator to verify eligibility (at least 18 years old, man/woman in MDM or woman in GNM, access to a smartphone). Sixteen interested individuals were not eligible for the study due to the gender/major combination. ( 482ff .)

What method of sample selection was used by Lawson? Why is it important to define “MDM” at the outset? How does this definition relate to sampling? Why were interested participants directed to the study coordinator to verify eligibility?

Final Words

I have found that students often find it difficult to be specific enough when defining and choosing their sample. It might help to think about your sample design and sample recruitment like a cookbook. You want all the details there so that someone else can pick up your study and conduct it as you intended. That person could be yourself, but this analogy might work better if you have someone else in mind. When I am writing down recipes, I often think of my sister and try to convey the details she would need to duplicate the dish. We share a grandmother whose recipes are full of handwritten notes in the margins, in spidery ink, that tell us what bowl to use when or where things could go wrong. Describe your sample clearly, convey the steps required accurately, and then add any other details that will help keep you on track and remind you why you have chosen to limit possible interviewees to those of a certain age or class or location. Imagine actually going out and getting your sample (making your dish). Do you have all the necessary details to get started?

Table 5.1. Sampling Type and Strategies

Further Readings

Fusch, Patricia I., and Lawrence R. Ness. 2015. “Are We There Yet? Data Saturation in Qualitative Research.” Qualitative Report 20(9):1408–1416.

Saunders, Benjamin, Julius Sim, Tom Kinstone, Shula Baker, Jackie Waterfield, Bernadette Bartlam, Heather Burroughs, and Clare Jinks. 2018. “Saturation in Qualitative Research: Exploring Its Conceptualization and Operationalization.”  Quality & Quantity  52(4):1893–1907.

• Rubin ( 2021 ) suggests a minimum of twenty interviews (but safer with thirty) for an interview-based study and a minimum of three to six months in the field for ethnographic studies. For a content-based study, she suggests between five hundred and one thousand documents, although some will be “very small” ( 243–244 ). ↵

The process of selecting people or other units of analysis to represent a larger population. In quantitative research, this representation is taken quite literally, as statistically representative.  In qualitative research, in contrast, sample selection is often made based on potential to generate insight about a particular topic or phenomenon.

The actual list of individuals that the sample will be drawn from. Ideally, it should include the entire target population (and nobody who is not part of that population).  Sampling frames can differ from the larger population when specific exclusions are inherent, as in the case of pulling names randomly from voter registration rolls where not everyone is a registered voter.  This difference in frame and population can undercut the generalizability of quantitative results.

The specific group of individuals that you will collect data from.  Contrast population.

The large group of interest to the researcher.  Although it will likely be impossible to design a study that incorporates or reaches all members of the population of interest, this should be clearly defined at the outset of a study so that a reasonable sample of the population can be taken.  For example, if one is studying working-class college students, the sample may include twenty such students attending a particular college, while the population is “working-class college students.”  In quantitative research, clearly defining the general population of interest is a necessary step in generalizing results from a sample.  In qualitative research, defining the population is conceptually important for clarity.

A sampling strategy in which the sample is chosen to represent (numerically) the larger population from which it is drawn by random selection.  Each person in the population has an equal chance of making it into the sample.  This is often done through a lottery or other chance mechanisms (e.g., a random selection of every twelfth name on an alphabetical list of voters).  Also known as random sampling .

The selection of research participants or other data sources based on availability or accessibility, in contrast to purposive sampling .

A sample generated non-randomly by asking participants to help recruit more participants the idea being that a person who fits your sampling criteria probably knows other people with similar criteria.

Broad codes that are assigned to the main issues emerging in the data; identifying themes is often part of initial coding . 

A form of case selection focusing on examples that do not fit the emerging patterns. This allows the researcher to evaluate rival explanations or to define the limitations of their research findings. While disconfirming cases are found (not sought out), researchers should expand their analysis or rethink their theories to include/explain them.

A methodological tradition of inquiry and approach to analyzing qualitative data in which theories emerge from a rigorous and systematic process of induction.  This approach was pioneered by the sociologists Glaser and Strauss (1967).  The elements of theory generated from comparative analysis of data are, first, conceptual categories and their properties and, second, hypotheses or generalized relations among the categories and their properties – “The constant comparing of many groups draws the [researcher’s] attention to their many similarities and differences.  Considering these leads [the researcher] to generate abstract categories and their properties, which, since they emerge from the data, will clearly be important to a theory explaining the kind of behavior under observation.” (36).

The result of probability sampling, in which a sample is chosen to represent (numerically) the larger population from which it is drawn by random selection.  Each person in the population has an equal chance of making it into the random sample.  This is often done through a lottery or other chance mechanisms (e.g., the random selection of every twelfth name on an alphabetical list of voters).  This is typically not required in qualitative research but rather essential for the generalizability of quantitative research.

A form of case selection or purposeful sampling in which cases that are unusual or special in some way are chosen to highlight processes or to illuminate gaps in our knowledge of a phenomenon.   See also extreme case .

The point at which you can conclude data collection because every person you are interviewing, the interaction you are observing, or content you are analyzing merely confirms what you have already noted.  Achieving saturation is often used as the justification for the final sample size.

The accuracy with which results or findings can be transferred to situations or people other than those originally studied.  Qualitative studies generally are unable to use (and are uninterested in) statistical generalizability where the sample population is said to be able to predict or stand in for a larger population of interest.  Instead, qualitative researchers often discuss “theoretical generalizability,” in which the findings of a particular study can shed light on processes and mechanisms that may be at play in other settings.  See also statistical generalization and theoretical generalization .

A term used by IRBs to denote all materials aimed at recruiting participants into a research study (including printed advertisements, scripts, audio or video tapes, or websites).  Copies of this material are required in research protocols submitted to IRB.

Introduction to Qualitative Research Methods Copyright © 2023 by Allison Hurst is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License , except where otherwise noted.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Methodology
• What Is Qualitative Research? | Methods & Examples

What Is Qualitative Research? | Methods & Examples

Published on 4 April 2022 by Pritha Bhandari . Revised on 30 January 2023.

Qualitative research involves collecting and analysing non-numerical data (e.g., text, video, or audio) to understand concepts, opinions, or experiences. It can be used to gather in-depth insights into a problem or generate new ideas for research.

Qualitative research is the opposite of quantitative research , which involves collecting and analysing numerical data for statistical analysis.

Qualitative research is commonly used in the humanities and social sciences, in subjects such as anthropology, sociology, education, health sciences, and history.

• How does social media shape body image in teenagers?
• How do children and adults interpret healthy eating in the UK?
• What factors influence employee retention in a large organisation?
• How is anxiety experienced around the world?
• How can teachers integrate social issues into science curriculums?

Table of contents

Approaches to qualitative research, qualitative research methods, qualitative data analysis, advantages of qualitative research, disadvantages of qualitative research, frequently asked questions about qualitative research.

Qualitative research is used to understand how people experience the world. While there are many approaches to qualitative research, they tend to be flexible and focus on retaining rich meaning when interpreting data.

Common approaches include grounded theory, ethnography, action research, phenomenological research, and narrative research. They share some similarities, but emphasise different aims and perspectives.

Prevent plagiarism, run a free check.

Each of the research approaches involve using one or more data collection methods . These are some of the most common qualitative methods:

• Observations: recording what you have seen, heard, or encountered in detailed field notes.
• Interviews:  personally asking people questions in one-on-one conversations.
• Focus groups: asking questions and generating discussion among a group of people.
• Surveys : distributing questionnaires with open-ended questions.
• Secondary research: collecting existing data in the form of texts, images, audio or video recordings, etc.
• You take field notes with observations and reflect on your own experiences of the company culture.
• You distribute open-ended surveys to employees across all the company’s offices by email to find out if the culture varies across locations.
• You conduct in-depth interviews with employees in your office to learn about their experiences and perspectives in greater detail.

Qualitative researchers often consider themselves ‘instruments’ in research because all observations, interpretations and analyses are filtered through their own personal lens.

For this reason, when writing up your methodology for qualitative research, it’s important to reflect on your approach and to thoroughly explain the choices you made in collecting and analysing the data.

Qualitative data can take the form of texts, photos, videos and audio. For example, you might be working with interview transcripts, survey responses, fieldnotes, or recordings from natural settings.

Most types of qualitative data analysis share the same five steps:

• Prepare and organise your data. This may mean transcribing interviews or typing up fieldnotes.
• Review and explore your data. Examine the data for patterns or repeated ideas that emerge.
• Develop a data coding system. Based on your initial ideas, establish a set of codes that you can apply to categorise your data.
• Assign codes to the data. For example, in qualitative survey analysis, this may mean going through each participant’s responses and tagging them with codes in a spreadsheet. As you go through your data, you can create new codes to add to your system if necessary.
• Identify recurring themes. Link codes together into cohesive, overarching themes.

There are several specific approaches to analysing qualitative data. Although these methods share similar processes, they emphasise different concepts.

Qualitative research often tries to preserve the voice and perspective of participants and can be adjusted as new research questions arise. Qualitative research is good for:

• Flexibility

The data collection and analysis process can be adapted as new ideas or patterns emerge. They are not rigidly decided beforehand.

• Natural settings

Data collection occurs in real-world contexts or in naturalistic ways.

• Meaningful insights

Detailed descriptions of people’s experiences, feelings and perceptions can be used in designing, testing or improving systems or products.

• Generation of new ideas

Open-ended responses mean that researchers can uncover novel problems or opportunities that they wouldn’t have thought of otherwise.

Researchers must consider practical and theoretical limitations in analysing and interpreting their data. Qualitative research suffers from:

• Unreliability

The real-world setting often makes qualitative research unreliable because of uncontrolled factors that affect the data.

• Subjectivity

Due to the researcher’s primary role in analysing and interpreting data, qualitative research cannot be replicated . The researcher decides what is important and what is irrelevant in data analysis, so interpretations of the same data can vary greatly.

• Limited generalisability

Small samples are often used to gather detailed data about specific contexts. Despite rigorous analysis procedures, it is difficult to draw generalisable conclusions because the data may be biased and unrepresentative of the wider population .

• Labour-intensive

Although software can be used to manage and record large amounts of text, data analysis often has to be checked or performed manually.

Quantitative research deals with numbers and statistics, while qualitative research deals with words and meanings.

Quantitative methods allow you to test a hypothesis by systematically collecting and analysing data, while qualitative methods allow you to explore ideas and experiences in depth.

There are five common approaches to qualitative research :

• Grounded theory involves collecting data in order to develop new theories.
• Ethnography involves immersing yourself in a group or organisation to understand its culture.
• Narrative research involves interpreting stories to understand how people make sense of their experiences and perceptions.
• Phenomenological research involves investigating phenomena through people’s lived experiences.
• Action research links theory and practice in several cycles to drive innovative changes.

Data collection is the systematic process by which observations or measurements are gathered in research. It is used in many different contexts by academics, governments, businesses, and other organisations.

There are various approaches to qualitative data analysis , but they all share five steps in common:

• Prepare and organise your data.
• Review and explore your data.
• Develop a data coding system.
• Assign codes to the data.
• Identify recurring themes.

The specifics of each step depend on the focus of the analysis. Some common approaches include textual analysis , thematic analysis , and discourse analysis .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Bhandari, P. (2023, January 30). What Is Qualitative Research? | Methods & Examples. Scribbr. Retrieved 31 May 2024, from https://www.scribbr.co.uk/research-methods/introduction-to-qualitative-research/

Is this article helpful?

Pritha Bhandari

• Skip to main content
• Skip to primary sidebar
• Skip to footer
• QuestionPro

• Solutions Industries Gaming Automotive Sports and events Education Government Travel & Hospitality Financial Services Healthcare Cannabis Technology Use Case NPS+ Communities Audience Contactless surveys Mobile LivePolls Member Experience GDPR Positive People Science 360 Feedback Surveys
• Resources Blog eBooks Survey Templates Case Studies Training Help center

Home Market Research

Qualitative Research Methods: Types, Analysis + Examples

Qualitative research is based on the disciplines of social sciences like psychology, sociology, and anthropology. Therefore, the qualitative research methods allow for in-depth and further probing and questioning of respondents based on their responses. The interviewer/researcher also tries to understand their motivation and feelings. Understanding how your audience makes decisions can help derive conclusions in market research.

What is qualitative research?

Qualitative research is defined as a market research method that focuses on obtaining data through open-ended and conversational communication .

This method is about “what” people think and “why” they think so. For example, consider a convenience store looking to improve its patronage. A systematic observation concludes that more men are visiting this store. One good method to determine why women were not visiting the store is conducting an in-depth interview method with potential customers.

For example, after successfully interviewing female customers and visiting nearby stores and malls, the researchers selected participants through random sampling . As a result, it was discovered that the store didn’t have enough items for women.

So fewer women were visiting the store, which was understood only by personally interacting with them and understanding why they didn’t visit the store because there were more male products than female ones.

Gather research insights

Types of qualitative research methods with examples

Qualitative research methods are designed in a manner that helps reveal the behavior and perception of a target audience with reference to a particular topic. There are different types of qualitative research methods, such as in-depth interviews, focus groups, ethnographic research, content analysis, and case study research that are usually used.

The results of qualitative methods are more descriptive, and the inferences can be drawn quite easily from the obtained data .

Qualitative research methods originated in the social and behavioral research sciences. Today, our world is more complicated, and it is difficult to understand what people think and perceive. Online research methods make it easier to understand that as it is a more communicative and descriptive analysis .

The following are the qualitative research methods that are frequently used. Also, read about qualitative research examples :

1. One-on-one interview

Conducting in-depth interviews is one of the most common qualitative research methods. It is a personal interview that is carried out with one respondent at a time. This is purely a conversational method and invites opportunities to get details in depth from the respondent.

One of the advantages of this method is that it provides a great opportunity to gather precise data about what people believe and their motivations . If the researcher is well experienced, asking the right questions can help him/her collect meaningful data. If they should need more information, the researchers should ask such follow-up questions that will help them collect more information.

These interviews can be performed face-to-face or on the phone and usually can last between half an hour to two hours or even more. When the in-depth interview is conducted face to face, it gives a better opportunity to read the respondents’ body language and match the responses.

2. Focus groups

A focus group is also a commonly used qualitative research method used in data collection. A focus group usually includes a limited number of respondents (6-10) from within your target market.

The main aim of the focus group is to find answers to the “why, ” “what,” and “how” questions. One advantage of focus groups is you don’t necessarily need to interact with the group in person. Nowadays, focus groups can be sent an online survey on various devices, and responses can be collected at the click of a button.

Focus groups are an expensive method as compared to other online qualitative research methods. Typically, they are used to explain complex processes. This method is very useful for market research on new products and testing new concepts.

3. Ethnographic research

Ethnographic research is the most in-depth observational research method that studies people in their naturally occurring environment.

This method requires the researchers to adapt to the target audiences’ environments, which could be anywhere from an organization to a city or any remote location. Here, geographical constraints can be an issue while collecting data.

This research design aims to understand the cultures, challenges, motivations, and settings that occur. Instead of relying on interviews and discussions, you experience the natural settings firsthand.

This type of research method can last from a few days to a few years, as it involves in-depth observation and collecting data on those grounds. It’s a challenging and time-consuming method and solely depends on the researcher’s expertise to analyze, observe, and infer the data.

4. Case study research

T he case study method has evolved over the past few years and developed into a valuable quality research method. As the name suggests, it is used for explaining an organization or an entity.

This type of research method is used within a number of areas like education, social sciences, and similar. This method may look difficult to operate; however , it is one of the simplest ways of conducting research as it involves a deep dive and thorough understanding of the data collection methods and inferring the data.

5. Record keeping

This method makes use of the already existing reliable documents and similar sources of information as the data source. This data can be used in new research. This is similar to going to a library. There, one can go over books and other reference material to collect relevant data that can likely be used in the research.

6. Process of observation

Qualitative Observation is a process of research that uses subjective methodologies to gather systematic information or data. Since the focus on qualitative observation is the research process of using subjective methodologies to gather information or data. Qualitative observation is primarily used to equate quality differences.

Qualitative observation deals with the 5 major sensory organs and their functioning – sight, smell, touch, taste, and hearing. This doesn’t involve measurements or numbers but instead characteristics.

Explore Insightfully Contextual Inquiry in Qualitative Research

Qualitative research: data collection and analysis

A. qualitative data collection.

Qualitative data collection allows collecting data that is non-numeric and helps us to explore how decisions are made and provide us with detailed insight. For reaching such conclusions the data that is collected should be holistic, rich, and nuanced and findings to emerge through careful analysis.

• Whatever method a researcher chooses for collecting qualitative data, one aspect is very clear the process will generate a large amount of data. In addition to the variety of methods available, there are also different methods of collecting and recording the data.

For example, if the qualitative data is collected through a focus group or one-to-one discussion, there will be handwritten notes or video recorded tapes. If there are recording they should be transcribed and before the process of data analysis can begin.

• As a rough guide, it can take a seasoned researcher 8-10 hours to transcribe the recordings of an interview, which can generate roughly 20-30 pages of dialogues. Many researchers also like to maintain separate folders to maintain the recording collected from the different focus group. This helps them compartmentalize the data collected.
• In case there are running notes taken, which are also known as field notes, they are helpful in maintaining comments, environmental contexts, environmental analysis , nonverbal cues etc. These filed notes are helpful and can be compared while transcribing audio recorded data. Such notes are usually informal but should be secured in a similar manner as the video recordings or the audio tapes.

B. Qualitative data analysis

Qualitative data analysis such as notes, videos, audio recordings images, and text documents. One of the most used methods for qualitative data analysis is text analysis.

Text analysis is a  data analysis method that is distinctly different from all other qualitative research methods, where researchers analyze the social life of the participants in the research study and decode the words, actions, etc. 

There are images also that are used in this research study and the researchers analyze the context in which the images are used and draw inferences from them. In the last decade, text analysis through what is shared on social media platforms has gained supreme popularity.

Characteristics of qualitative research methods

• Qualitative research methods usually collect data at the sight, where the participants are experiencing issues or research problems . These are real-time data and rarely bring the participants out of the geographic locations to collect information.
• Qualitative researchers typically gather multiple forms of data, such as interviews, observations, and documents, rather than rely on a single data source .
• This type of research method works towards solving complex issues by breaking down into meaningful inferences, that is easily readable and understood by all.
• Since it’s a more communicative method, people can build their trust on the researcher and the information thus obtained is raw and unadulterated.

Qualitative research method case study

Let’s take the example of a bookstore owner who is looking for ways to improve their sales and customer outreach. An online community of members who were loyal patrons of the bookstore were interviewed and related questions were asked and the questions were answered by them.

At the end of the interview, it was realized that most of the books in the stores were suitable for adults and there were not enough options for children or teenagers.

By conducting this qualitative research the bookstore owner realized what the shortcomings were and what were the feelings of the readers. Through this research now the bookstore owner can now keep books for different age categories and can improve his sales and customer outreach.

Such qualitative research method examples can serve as the basis to indulge in further quantitative research , which provides remedies.

When to use qualitative research

Researchers make use of qualitative research techniques when they need to capture accurate, in-depth insights. It is very useful to capture “factual data”. Here are some examples of when to use qualitative research.

• Developing a new product or generating an idea.
• Studying your product/brand or service to strengthen your marketing strategy.
• To understand your strengths and weaknesses.
• Understanding purchase behavior.
• To study the reactions of your audience to marketing campaigns and other communications.
• Exploring market demographics, segments, and customer care groups.
• Gathering perception data of a brand, company, or product.

LEARN ABOUT: Steps in Qualitative Research

Qualitative research methods vs quantitative research methods

The basic differences between qualitative research methods and quantitative research methods are simple and straightforward. They differ in:

• Their analytical objectives
• Types of questions asked
• Types of data collection instruments
• Forms of data they produce
• Degree of flexibility

LEARN MORE ABOUR OUR SOFTWARE         FREE TRIAL

MORE LIKE THIS

Top 8 Data Trends to Understand the Future of Data

May 30, 2024

Top 12 Interactive Presentation Software to Engage Your User

May 29, 2024

Trend Report: Guide for Market Dynamics & Strategic Analysis

Cannabis Industry Business Intelligence: Impact on Research

May 28, 2024

Other categories

• Academic Research
• Artificial Intelligence
• Assessments
• Brand Awareness
• Case Studies
• Communities
• Consumer Insights
• Customer effort score
• Customer Engagement
• Customer Experience
• Customer Loyalty
• Customer Research
• Customer Satisfaction
• Employee Benefits
• Employee Engagement
• Employee Retention
• Friday Five
• General Data Protection Regulation
• Insights Hub
• Life@QuestionPro
• Market Research
• Mobile diaries
• Mobile Surveys
• New Features
• Online Communities
• Question Types
• Questionnaire
• QuestionPro Products
• Release Notes
• Research Tools and Apps
• Revenue at Risk
• Survey Templates
• Training Tips
• Uncategorized
• Video Learning Series
• What’s Coming Up
• Workforce Intelligence

6 Qualitative data examples for thorough market researchers

Types of qualitative data in market research, 6 qualitative data examples, get nuanced insights from qualitative market research.

There are plenty of ways to gather consumer insights for fresh campaigns and better products, but qualitative research is up there with the best sources of insight.

This guide is packed with examples of how to turn qualitative data into actionable insights, to spark your creativity and sharpen your research strategy. You’ll see how qualitative data, especially through surveys, opens doors to deeper understanding by inviting consumers to share their experiences and thoughts freely, in their own words — and how qualitative data can transform your brand.

Before we dig into some examples of how qualitative data can empower your teams to make focused, confident and quick decisions on anything from product to marketing, let’s go back to basics. We can categorize qualitative data into roughly three categories: binary, nominal and ordinal data. Here’s how each of them is used in qualitative data analysis.

Binary data

Binary data represents a choice between two distinct options, like ‘yes’ or ‘no’. In market research, this type of qualitative data is useful for filtering responses or making clear distinctions in consumer preferences.

Binary data in qualitative research is great for straightforward insights, but has its limits. Here’s a quick guide on when to use it and when to opt for qualitative data that is more detailed:

Binary data is great for:

• Quick Yes/No questions : like “Have you used our app? Yes or No.”
• Initial screening : to quickly sort participants for further studies.
• Clear-cut answers : absolute factors, such as ownership or usage.

Avoid binary data for:

• Understanding motivations : it lacks the depth to explore why behind actions.
• Measuring intensity : can’t show how much someone likes or uses something.
• Detail needed for product development : misses the nuanced feedback necessary for innovations.

Nominal data

Nominal data categorizes responses without implying any order. For example, when survey respondents choose their favorite brand from a list, the data collected is nominal, offering insights into brand preferences among different demographics.

Some other examples of qualitative data that can be qualified as nominal are asking participants to name their primary information source about products in categories like social media, friends, or online reviews. Or in focus groups, discussing brand perceptions could classify brands into categories such as luxury, budget-friendly, or eco-conscious, based on participant descriptions.

Nominal data is great for:

• Categorizing responses : such as types of consumer complaints (product quality, customer service, delivery issues).
• Identifying preferences : like favorite product categories (beverages, electronics, apparel).
• Segmentation : grouping participants based on attributes (first-time buyers, loyal customers).

Nominal data is not for:

• Measuring quantities : it can’t quantify how much more one category is preferred over another.
• Ordering or ranking responses : it doesn’t indicate which category is higher or lower in any hierarchy.
• Detailed behavioral analysis : While it can group behaviors, it doesn’t delve into the frequency or intensity of those behaviors.

Ordinal data

Ordinal data introduces a sense of order, ranking preferences or satisfaction levels. In qualitative analysis, it’s particularly useful for understanding how consumers prioritize features or products, giving researchers a clearer picture of market trends.

Other examples of qualitative data analyses that use ordinal data, are for instance a study on consumer preferences for coffee flavors, participants might rank flavors in order of preference, providing insights into flavor trends. You can also get ordinal data from focus groups on things like customer satisfaction surveys or app usability, by asking users to rate their ease of use or happiness on an ordinal scale.

Ordinal data is great for:

• Ranking preferences : asking participants to rank product features from most to least important.
• Measuring satisfaction levels : using scales like “very satisfied,” “satisfied,” “neutral,” “dissatisfied,” “very dissatisfied.”
• Assessing Agreement : with statements on a scale from “strongly agree” to “strongly disagree.”

Ordinal data is not for:

• Quantifying differences : it doesn’t show how much more one rank is preferred over another, just the order.
• Precise measurements : can’t specify the exact degree of satisfaction or agreement, only relative positions.

This mix of qualitative and quantitative data will give you a well-rounded view of participant attitudes and preferences.

The things you can do with qualitative data are endless. But this article shouldn’t turn into a work of literature, so we’ll highlight six ways to collect qualitative data and give you examples of how to use these qualitative research methods to get actionable results.

How to get qual insights with Attest

You can get to the heart of what your target customers think, with reliable qualitative insights from Attest Video Responses

1. Highlighting brand loyalty drivers with open-ended surveys and questionnaires

Open-ended surveys and questionnaires are great at finding out what makes customers choose and stick with a brand. Here’s why this qualitative data analysis tool is so good for gathering qualitative data on things like brand loyalty and customer experience:

Straight from the source

Open-ended survey responses show the actual thoughts and feelings of your target audience in their own words, while still giving you structure in your data analysis.

Understanding ‘why’

Numbers can show us how many customers are loyal; open-ended survey responses explain why they are. You can also easily add thematic analysis to the mix by counting certain keywords or phrases.

Guiding decisions

The insights from these surveys can help a brand decide where to focus its efforts, from making sure their marketing highlights what customers love most to improving parts of their product.

Surveys are one of the most versatile and efficient qualitative data collection methods out there. We want to bring the power of qualitative data analysis to every business and make it easy to gather qualitative data from the people who matter most to your brand. Check out our survey templates to hit the ground running. And you’re not limited to textual data as your only data source — we also enable you to gather video responses to get additional context from non verbal cues and more.

2. Trend identification with observation notes

Observation notes are a powerful qualitative data analysis tool for spotting trends as they naturally unfold in real-world settings. Here’s why they’re particularly valuable insights and effective for identifying new trends:

Real behavior

Observing people directly shows us how they actually interact with products or services, not just how they say they do. This can highlight emerging trends in consumer behavior or preferences before people can even put into words what they are doing and why.

Immediate insights

By watching how people engage with different products, we can quickly spot patterns or changes in behavior. This immediate feedback is invaluable for catching trends as they start.

Context matters

Observations give you context. You can see not just what people do, but where and how they do it. This context can be key to understanding why a trend is taking off.

Unprompted reactions

Since people don’t know they’re being observed for these purposes, their actions are genuine. This leads to authentic insights about what’s really catching on.

3. Understanding consumer sentiments through semi-structured interviews

Semi-structured interviews for qualitative data analysis are an effective method for data analysts to get a deep understanding of consumer sentiments. It provides a structured yet flexible approach to gather in-depth insights. Here’s why they’re particularly useful for this type of research question:

Personal connection

These interviews create a space for a real conversation, allowing consumers to share their feelings, experiences, and opinions about a brand or product in a more personal setting.

Flexibility

The format lets the interviewer explore interesting points that come up during the conversation, diving deeper into unexpected areas of discussion. This flexibility uncovers richer insights than strictly structured interviews.

Depth of understanding

By engaging in detailed discussions, brands can understand not just what consumers think but why they think that way and what stations their train of thought passes by.

Structure and surprise

Semi-structured interviews can be tailored to explore specific areas of interest while still allowing for new insights to emerge.

4. Using focus groups for informing market entry strategies

Using a focus group to inform market entry strategies provides a dynamic way to discover your potential customers’ needs, preferences, and perceptions before launching a product or entering a new market. Here’s how focus groups can be particularly effective for this kind of research goal:

Real conversations

Focus groups allow for real-time, interactive discussions, giving you a front-row seat to hear what your potential customers think and feel about your product or service idea.

Diverse Perspectives

By bringing together people from various backgrounds, a focus group can offer a wide range of views and insights, highlighting different consumer needs and contextual information that you might miss out on in a survey.

Spotting opportunities and challenges

The dynamic nature of focus groups can help uncover unique market opportunities or potential challenges that might not be evident through other research methods, like cultural nuances.

Testing ideas

A focus group is a great way to test and compare reactions to different market entry strategies, from pricing models to distribution channels, providing clear direction on what approach might work best.

5. Case studies to gain a nuanced understanding of consumers on a broad level

Case studies in qualitative research zoom in on specific stories from customers or groups using a product or service, great for gaining a nuanced understanding of consumers at a broad level. Here’s why case studies are a particularly effective qualitative data analysis tool for this type of research goal:

In-depth analysis

Case studies can provide a 360-degree look at the consumer experience, from initial awareness to post-purchase feelings.

This depth of insight reveals not just what consumers do, but why they do it, uncovering motivations, influences, and decision-making processes.

Longitudinal insight

Case studies can track changes in consumer behavior or satisfaction over time, offering a dynamic view of how perceptions evolve.

This longitudinal perspective is crucial for giving context to the lifecycle of consumer engagement with a brand.

Storytelling power

The narrative nature of case studies — when done right — makes them powerful tools for communicating complex consumer insights in an accessible and engaging way, which can be especially useful for internal strategy discussions or external marketing communications.

6. Driving product development with diary studies

Diary studies are a unique qualitative research method that involves participants recording their thoughts, experiences, or behaviors over a period of time, related to using a product or service. This qualitative data analysis method is especially valuable for driving product development for several reasons:

Real-time insights

Diary studies capture real-time user experiences and feedback as they interact with a product in their daily lives.

This ongoing documentation provides a raw, unfiltered view of how a product fits into the user’s routine, highlighting usability issues or unmet needs that might not be captured in a one-time survey or interview.

Realistic user journey mapping

By analyzing diary entries, you can map out the entire user journey, identifying critical touch points where users feel delighted, frustrated, or indifferent.

This then enables you to implement targeted improvements and innovations at the moments that matter most.

Identifying patterns

Over the course of a diary study, patterns in behavior, preferences, and challenges can emerge, which is great for thematic analysis.

It can guide product developers to prioritize features or fixes that will have the most significant impact on user satisfaction, which is especially great if they don’t know what areas to focus on first.

Qualitative research brings your consumers’ voices directly to your strategy table. The examples we’ve explored show how qualitative data analysis methods like surveys, interviews, and case studies illuminate the ‘why’ behind consumer choices, guiding more informed decisions. Using these insights means crafting products and messages that resonate deeply, ensuring your brand not only meets but exceeds consumer expectations.

Customer Research Manager 

Related articles

Making it personal – using tech to build connections with consumers | diageo, panel discussion – future-proofing your brand with consumer insights, attest product release: multi-market | attest’s alyssa stringer, subscribe to our newsletter.

Fill in your email and we’ll drop fresh insights and events info into your inbox each week.

* I agree to receive communications from Attest. Privacy Policy .

You're now subscribed to our mailing list to receive exciting news, reports, and other updates!

Learn about analytics, product, and technical terms and get their definitions in our Glossary.

• A/B Testing
• Adoption rate
• Behavioral analytics
• Conversion funnel
• Conversion rate
• Customer experience (CX)
• Daily active users (DAU)
• Go to market strategy
• Marketing qualified lead (MQL)
• Mobile analytics
• Product analytics
• Product features
• Product led growth (PLG)
• Product management
• Product roadmap
• Product strategy

Why qualitative data is important

Types of qualitative data, how product and marketing teams use qualitative data, best practices for using qualitative data, tips for analyzing qualitative data, analyze qualitative data with amplitude.

• Sales qualified lead (SQL)
• User behavior analytics
• User engagement
• Universally unique identifier (UUID)
• User persona
• User segmentation
• User stories
• Website analytics

Qualitative data

Qualitative data is collected through methods like interviews, focus groups, and observations . Instead of using numerical measurements, qualitative data offers insights via words, images, and sometimes objects. This approach allows for richer and more diverse data collection and provides an in-depth understanding of individuals' thoughts, feelings, behaviors, and attitudes.

While quantitative data provides numerical measurements, it may only partially capture why customers behave as they do in your product. Qualitative data fills this gap with rich insights into individuals' motivations, preferences, and experiences.

When you understand the "why" behind customers' actions, your teams can make more informed decisions and create products and marketing strategies that better resonate with your target audience.

You can collect various types of qualitative data to understand customers' behaviors more deeply. Here are the most common ways to gather qualitative data:

• Interviews: Conducting one-on-one interviews is a standard method to gain insights into customers' thoughts and feelings about a product or service.
• Focus Groups: These are group discussions that allow teams to observe interactions and conversations about a product, service, or concept.
• Observations: Direct or participant observation provides unfiltered data on how individuals use a product or service in a natural setting.
• Case Studies: Detailed studies of individual cases, like a specific customer or a particular event, can provide valuable insights into the value of a product or service.
• Ethnographic Research: This involves studying people in their environment to understand the cultural, social, and contextual factors that influence their behaviors and decisions.
• Text Analysis: Analyzing written content from customer reviews, social media posts, or emails can shed light on customers' opinions and attitudes.

Product and marketing teams use qualitative data to gain insights into their target audience and understand their preferences and pain points. Here are some specific ways your product and marketing teams can use qualitative data:

• Market research: You can use qualitative data to conduct market research and understand your target audience's demographics, motivations, and behaviors. This information helps you better position your products and marketing strategies..
• Product development: Qualitative data is valuable during the product development process. It enables your teams to gather feedback from customers on a product's features, design, and usability.
• User experience design: Qualitative data is also helpful in user experience (UX) design. By understanding how users interact with your product, you can identify pain points and areas for improvement to enhance the overall user experience.
• Competitive analysis: Qualitative data can provide insights into your competition. By conducting interviews or focus groups with your competitors' customers, you can better understand their target audience’s values and perception of their products.
• Content creation: Marketing teams can use qualitative data to inform your content strategy. By understanding how your target audience talks about their challenges, interests, and preferences, you can create more relevant and compelling content that will resonate.
• Messaging and positioning: You can use qualitative data to develop messaging and positioning. By understanding your target audience’s perception of your product or brand, you can create messaging that speaks directly to their pain points and motivations.

Here are some best practices for using qualitative data effectively:

• Define clear research objectives: Before collecting qualitative data, define your research objectives and what you want to achieve through the data. This will help guide the type of data you collect and how you analyze it.
• Choose the proper methods: Select the most appropriate method depending on your research objectives and the data type you need.
• Ensure a diverse sample: It's essential that your sample for qualitative research is diverse and representative of your target audience. This will help provide a well-rounded understanding and avoid bias in the data collected.
• Stay objective: When analyzing qualitative data, your teams must remain objective and not let their biases or assumptions influence their interpretation.
• Use different sources: Using multiple qualitative data sources promotes the accuracy and depth of your analysis. For example, you could include customer interviews, observe user groups who don't use your product, and analyze reviews from churned users.

Here are some tips for effectively analyzing qualitative data:

• Organize and code the data: For optimal insights, organize your data systematically, using coding or tagging systems. This makes it easier to identify patterns and themes within the data.
• Use software tools: TSoftware tools can help you analyze your qualitative data more efficiently. They can help you organize and code data and identify themes.
• Look for patterns: Patterns in qualitative data can provide valuable insights into your target audience's thoughts, feelings, and behaviors.
• Consider the context: It's crucial to consider the context in which you collected the data, including the participants' backgrounds, the research environment, and any external factors that may have influenced the data.

Quantitative provides invaluable insights into the “why” behind your customers’ behaviors. However, it's not just about collecting data—it’s about making data-informed decisions that drive success.

Amplitude helps you harness the full potential of your qualitative data, ensuring your product management and marketing strategies are finely tuned, user-centric, and constantly evolving. With Amplitude, you can unlock the depths of user behavior and preferences, helping your business thrive in the ever-evolving digital landscape.

Research Questionnaire

Questionnaire generator.

When a researcher creates a research paper using the scientific method they will need to use a gathering method that is adjacent to the research topic. This means that the researcher will use a quantitative research method for a quantitive topic and a qualitative method for a qualitative  one.  The research questionnaire is one of the quantitative data-gathering methods a researcher can use in their research paper.

1. Market Research Questionnaire Template Example

• Google Docs
• Apple Pages

Size: 38 KB

2. Market Research Questionnaire Example

Size: 94 KB

3. Research Questionnaire Example

4. Sample Market Research Questionnaire

Size: 35 KB

5. Research Survey Questionnaire

Size: 42 KB

6. Research Survey Questionnaire Construction

Size: 80 KB

7. Research Questionnaire Survey of Consumers

Size: 39 KB

8. Guide to the Design of Research Questionnaires

Size: 77 KB

9. Planning Survey Research Questionnaires

Size: 85 KB

10. Climate Change Survey Questionnaires

Size: 41 KB

11. Survey Questionnaire Design

Size: 96 KB

12. Developing Questionnaires for Educational Research

Size: 81 KB

13. Graudate Research Student Questionnaires

14. Sample Research Survey Questionnaires

Size: 46 KB

15. Market Research Questionnaire Example

16. Research Survey Questionnaire Example

17. Product X Research Study Questionnaire Example

What Is a Research Questionnaire?

A research questionnaire is a physical or digital questionnaire that researchers use to obtain quantitative data. The research questionnaire is a more in-depth version of a survey   as its questions often delve deeper than survey questions .

How to Write a Research Questionnaire

A well-made research questionnaire can effectively and efficiently gather data from the population. Creating a good research questionnaire does not require that many writing skills , soft skills , or hard skills , it just requires the person to properly understand the data set they are looking for.

Step 1: Select a Topic or Theme for the Research Questionnaire

Begin by choosing a topic or theme   for the research questionnaire as this will provide much-needed context for the research questionnaire. Not only that but the topic will also dictate the tone of the questions in the questionnaire.

Step 2: Obtain or Use a Research Questionnaire Outline

You may opt to use a research questionnaire outline or outline format for your research questionnaire. This outline will provide you with a structure you can use to easily make your research questionnaire.

Step 3: Create your Research Questionnaire

Start by creating questions that will help provide you with the necessary data to prove or disprove your research question. You may conduct brainstorming sessions to formulate the questions for your research questionnaire.

Step 4: Edit and Have Someone Proofread the Questionnaire

After you have created and completed the research questionnaire, you must edit the contents of the questionnaire. Not only that but it is wise to have someone proofread the contents of your questionnaire before deploying the questionnaire. 

How does a research questionnaire help businesses?

A successful business or company utilizes research questionnaires to not only obtain data from their customers but also to gather data about the performance and quality of the employees in the business. The research questionnaire provides the business or company with actionable data, which they can use to improve the product, service, or commodity to obtain more customers.

Do I need to provide a consent form when I ask someone to answer the research questionnaire?

Yes, consent is very important as without this the data you have gathered from your questionnaires or surveys are useless. Therefore it is important to provide a consent form with your research questionnaire when you are asking a participant to answer the document.

What type of answers are allowed in the research questionnaire?

Research questionnaires can host a multitude of types of questions each with its specific way of answering.  A questionnaire can use multiple-choice questions, open-ended questions, and closed questions. Just be sure to properly pace the questions as having too many different types of answering styles can demotivate or distract the target audience, which might lead to errors.

A research questionnaire is a data-gathering document people can use to obtain information and data from a specific group of people. Well-made and crafted research questionnaires will provide much-needed information one can use to answer a specific research question.

Text prompt

• Instructive
• Professional

Create a fun quiz to find out which historical figure you're most like in your study habits

Design a survey to discover students' favorite school subjects and why they love them.

• Open access
• Published: 27 May 2024

Patients’ satisfaction with cancer pain treatment at adult oncologic centers in Northern Ethiopia; a multi-center cross-sectional study

• Molla Amsalu 1 ,
• Henos Enyew Ashagrie 2 ,
• Amare Belete Getahun 2 &
• Yophtahe Woldegerima Berhe   ORCID: orcid.org/0000-0002-0988-7723 2  

BMC Cancer volume  24 , Article number:  647 ( 2024 ) Cite this article

79 Accesses

Metrics details

Patient satisfaction is an important indicator of the quality of healthcare. Pain is one of the most common symptoms among cancer patients that needs optimal treatment; rather, it compromises the quality of life of patients.

To assess the levels and associated factors of satisfaction with cancer pain treatment among adult patients at cancer centers found in Northern Ethiopia in 2023.

After obtaining ethical approval, a multi-center cross-sectional study was conducted at four cancer care centers in northern Ethiopia. The data were collected using an interviewer-administered structured questionnaire that included the Lubeck Medication Satisfaction Questionnaire (LMSQ). The severity of pain was assessed by a numerical rating scale from 0 to 10 with a pain score of 0 = no pain, 1–3 = mild pain, 4–6 = moderate pain, and 7–10 = severe pain Binary logistic regression analysis was employed, and the strength of association was described in an adjusted odds ratio with a 95% confidence interval.

A total of 397 cancer patients participated in this study, with a response rate of 98.3%. We found that 70.3% of patients were satisfied with their cancer pain treatment. Being married (AOR = 5.6, CI = 2.6–12, P  < 0.001) and being single (never married) (AOR = 3.5, CI = 1.3–9.7, P  = 0.017) as compared to divorced, receiving adequate pain management (AOR = 2.4, CI = 1.1–5.3, P  = 0.03) as compared to those who didn’t receive it, and having lower pain severity (AOR = 2.6, CI = 1.5–4.8, P  < 0.001) as compared to those who had higher level of pain severity were found to be associated with satisfaction with cancer pain treatment.

The majority of cancer patients were satisfied with cancer pain treatment. Being married, being single (never married), lower pain severity, and receiving adequate pain management were found to be associated with satisfaction with cancer pain treatment. It would be better to enhance the use of multimodal analgesia in combination with strong opioids to ensure adequate pain management and lower pain severity scores.

Peer Review reports

Introduction

Pain is defined as an unpleasant sensory and emotional experience associated with, or resembling that associated with, actual or potential tissue damage [ 1 ]. The prevalence of pain in cancer patients is 44.5-66%. with the prevalence of moderate to severe pain ranging from 30 to 38%, and it can persist in 5-10% of cancer survivors [ 2 ]. Using the World Health Organization’s (WHO) cancer pain management guidelines can effectively reduce cancer-related pain in 70-90% of patients [ 3 , 4 ]. Compared to traditional pain states, the mechanism of cancer-related pain is less understood; however, cancer-specific mechanisms, inflammatory, and neuropathic processes have been identified [ 5 ]. Uncontrolled pain can negatively affect patients’ daily lives, emotional health, social relationships, and adherence to cancer treatment [ 6 ]. Patients with moderate to severe pain have a higher fatigue score, a loss of appetite, and financial difficulties [ 7 ]. Patients fear the pain caused by cancer more than dying from the disease since pain affects their physical and mental aspects of life [ 8 ]. A meta-analysis of 30 studies stated that pain was found to be a significant prognostic factor for short-term survival in cancer patients [ 9 ]. Many cancer patients have a very poor prognosis. However, adequate pain treatment prevents suffering and improves their quality of life. Although the WHO suggested non-opioids for mild pain, weak opioids for moderate pain, and strong opioids for severe pain, pain treatment is not yet adequate in one-third of cancer patients [ 10 ].

Patient satisfaction with pain management is a valuable measure of treatment effectiveness and outcome. It could be used to evaluate the quality of care [ 11 , 12 , 13 ]. Patient satisfaction affects treatment compliance and adherence [ 12 ]. Studies have reported that 60-76% of patients were satisfied with pain treatment, and a variety of factors were found associated with levels of satisfaction [ 3 , 14 , 15 , 16 ]. Studies conducted in Ethiopia reported the prevalence of pain ranging from 59.9 to 93.4% [ 17 , 18 ]. These studies indicate that cancer pain is inadequately treated. Assessment of pain treatment satisfaction can help identify appropriate treatment modalities and further its effectiveness. We conducted this study since there was limited research-based evidence on cancer pain management in low-income countries like Ethiopia. Our research questions were: how satisfied are adult cancer patients with pain treatment, and what are the factors associated with the satisfaction of adult cancer patients with pain treatment?

Methodology

Study design, area, period, and population.

A multi-center cross-sectional study was conducted at four cancer care centers in Amhara National Regional State, Northern Ethiopia from March to May 2023. Those cancer care centers were found in the University of Gondar Comprehensive Specialized Hospital (UoGCSH), Felege-Hiwot Comprehensive Specialized Hospital (FHCSH), Tibebe-Ghion Comprehensive Specialised Hospital (TGCSH) and Dessie Comprehensive Specialized Hospital (DCSH). We selected these centers as they were the only institutions providing oncologic care in the region during the study period.

The UoGCSH had 28 beds in its adult oncology ward and serves 450 cancer patients every month. Three specialist oncologists and 12 nurses provide services in the ward. The FHCSH had 22 beds and provides services for 325 cancer patients every month. Two specialist oncologists, two oncologic nurses, and 7 comprehensive nurses provide services. The TGCSH had eight beds and serves 300 cancer patients every month. There were three specialist oncologists and four oncologic nurses at the care center. The cancer care center at DCSH had 10 beds. It serves 350 cancer patients every month. There was one specialist oncologist, three oncologic nurses, and three comprehensive nurses.

All cancer patients who attended those cancer care centers were the source population, and adult (18+) cancer patients who were prescribed pain treatment for a minimum of one month were the study population. Unconscious patients, patients with psychiatric problems, patients with advanced cancer who were unable to cooperate, and patients with oncologic emergencies were excluded from this study.

Variables and operational definitions

The outcome variable was patient satisfaction with cancer pain treatment, which was measured by the Lubeck Medication Satisfaction Questionnaire. The independent variables were sociodemographic (age, sex, marital status, monthly income, and level of education), clinical (site of tumor, stage of cancer, metastasis), cancer treatment (surgery, chemotherapy, radiotherapy), level of pain, and analgesia (type of analgesia, severity of pain, adequacy of pain treatment, adjuvant analgesic).

• Patient satisfaction

perceptions of the patients regarding the outcome of pain management and the extent to which it meets their needs and expectations. It was measured by a 4-point Likert scale (1 = strongly disagree, 2 = disagree, 3 = agree, 4 = strongly agree) using the LMSQ which has 18 items within 6 subscales that have 3 items in each (effectivity, practicality, side-effects, daily life, healthcare providers, and overall satisfaction) [ 19 ]. Final categorization was done by dichotomizing into satisfied and dissatisfied by using the demarcation threshold formula.

\((\frac{\text{T}\text{o}\text{t}\text{a}\text{l}\,\,\text{h}\text{i}\text{g}\text{h}\text{e}\text{s}\text{t}\,\,\text{s}\text{c}\text{o}\text{r}\text{e} - \text{T}\text{o}\text{t}\text{a}\text{l}\,\, \text{l}\text{o}\text{w}\text{e}\text{s}\text{t}\,\, \text{s}\text{c}\text{o}\text{r}\text{e} }{2}\) ) + Total lowest score [ 20 ]. The highest patient satisfaction score was 70 and the lowest satisfaction score was 26. A score < 48 was classified as dissatisfied, and a score ≥ 48 was classified as satisfied.

The Numeric rating scale (NRS) is a validated pain intensity assessment tool that helps to give patients a subjective feeling of pain with a numerical value between 0 and 10, in which 0 = no pain, 1–3 = mild pain, 4–6 = moderate pain, 7–10 = severe pain [ 21 ].

The Adequacy of cancer pain treatment was measured by calculating the Pain Management Index (PMI) according to the recommendations of the WHO pain management guideline [ 22 ]. The PMI was calculated by considering the prescribed most potent analgesic agent and the worst pain reported in the last 24 h [ 23 ]. The prescribed analgesics were scored as follows: 0 = no analgesia, 1 = non-opioid analgesia, 2 = weak opioids, and 3 = strong opioids. The PMI was calculated by subtracting the reported NRS value from the type of most potent analgesics administered. The calculated values of PMI ranged from − 3 (no analgesia therapy for a patient with severe pain) to + 3 (strong opioid for a patient with no pain). Patients with a positive PMI value were considered to be receiving adequate analgesia, whereas those with a negative PMI value were considered to be receiving inadequate analgesia.

Sample size determination and sampling technique

A single population proportion formula was used to determine the sample size by considering 50% satisfaction with cancer pain treatment and a 5% margin of error at a 95% confidence interval (CI). A non-probability (consecutive) sampling technique was employed to attain a sample size within two months of data collection period. After adjusting the proportional allocation for each center and adding 5% none response, a total of 404 study participants were included in the study: 128 from the University of Gondar Comprehensive Specialized Hospital, 99 from Dessie Comprehensive Specialized Hospital, 92 from Felege Hiwot Comprehensive Specialized Hospital, and 85 from Tibebe Ghion Comprehensive Specialized Hospital.

Data collection, processing, and analysis

Ethical approval.

was obtained from the Ethical Review Committee of the School of Medicine at the University of Gondar ( Reference number: CMHS/SM/06/01/4097/2015) . Data were collected using an interviewer-administered structured questionnaire and chart review during outpatient and inpatient hospital visits by four trained data collectors (one for every center). Written informed consent was obtained from each participant after detailed explanations about the study. Informed consent with a fingerprint signature was obtained from patients who could not read or write after detailed explanations by the data collectors as approved by the Ethical Review Committee of the School of Medicine, at the University of Gondar.

Questions to assess the severity of pain and pain relief were taken from the American Pain Society patient outcome questionnaire [ 24 ]. Patients were asked to report the worst and least pain in the past 24 h and the current pain by using a numeric rating scale from 0 to 10, with a pain score of 0 = no pain, 1–3 = mild pain, 4–6 = moderate pain, 7–10 = severe pain.

The Pain Management Index (PMI) based on WHO guidelines, was used to quantify pain management by measuring the adequacy of cancer pain treatment [ 25 ]. The following scores were given (0 = no analgesia, 1 = non-opioid analgesia, 2 = weak opioid 3 = strong opioid). Pain Management Index was calculated by subtracting self-reported pain level from the type of analgesia administered and ranges from − 3 (no analgesic therapy for a patient with severe pain) to + 3 (strong opioid for a patient with no pain). The level of pain was defined as 0 with no pain, 1 for mild pain, 2 for moderate pain, and 3 for severe pain. Patients with negative PMI scores received inadequate analgesia.

The pain treatment satisfaction was measured by the Lübeck Medication Satisfaction Questionnaire (LMSQ) consisting of 18 items [ 19 ]. Lübeck Medication Satisfaction Questionnaire (LMSQ) has six subclasses each consisting of equally waited and similar context of three items. The subclass includes satisfaction with the effectiveness of pain medication, satisfaction with the practicality or form of pain medication, satisfaction with the side effect profile of pain medication, satisfaction with daily life after receiving pain treatment, satisfaction with healthcare providers, and overall satisfaction. Satisfaction was expressed by a four-point Likert scale (4 = Strongly Agree, 3 = Agree, 2 = Disagree, 1 = Strongly Disagree). The side effect subclass was phrased negatively, marked with Asterix, and reverse-scored in STATA before data analysis.

Data were collected with an interviewer-administered questionnaire. The reliability of the questionnaire was assessed by using 40 pretested participants and the reliability coefficient (Cronbach’s alpha value) of the questionnaire was 91.2%. The collected data was checked for completeness, accuracy, and clarity by the investigators. The cleaned and coded data were entered in Epi-data software version 4.6 and exported to STATA version 17. The Shapiro-Wilk test, variance inflation factor, and Hosmer-Lemeshow test were used to assess distribution, multicollinearity, and model fitness, respectively. Descriptive, Chi-square and binary logistic regression analyses were performed to investigate the associations between the independent and dependent variables. The independent variables with a p-value < 0.2 in the bivariable binary logistic regression were fitted to the final multivariable binary logistic regression analysis. Variables with p-value < 0.05 in the final analysis were considered to have a statistically significant association. The strength of associations was described in adjusted odds ratio (AOR) at a 95% confidence interval.

Sociodemographic and clinical characteristics

A total of 397 patients were involved in this study (response rate of 98.3%). Of the participants, 224 (56.4%) were female, and over half were from rural areas ( n  = 210, 52.9%). The median (IQR) age was 48 (38–59) years [Table  1 ]. The most common type of cancer was gastrointestinal cancer 114 (28.7%). Most of the study participants, 213 (63.7%), were diagnosed with stage II to III cancer. The majority of the participants were taking chemotherapy alone (292 (73.6%)) [Table  2 ]. Over 90% of patients reported pain; 42.3% reported mild pain, 39.8% reported moderate pain, and 10.1% reported severe pain. Pain treatment adequacy was assessed by self-reports from study participants following pain management guidelines, and 17.1% of patients responded to having inadequate pain treatment. The majority of patients, 132 (33.3%), were prescribed combinations of non-opioid and weak opioid analgesics for cancer pain treatment. Only 34 (8.6%) cancer patients used either strong opioids alone or in combination with non-opioid analgesics.

Patients’ satisfaction with cancer pain treatment and correlation among the subscales

Most participants strongly agree (243, (61.2%)) with item LMSQ18 in the “overall satisfaction” subscale and strongly disagree (206, (51.9%)) for item LMSQ2 in the “side-effect” subscale respectively [Table  3 ]. The highest satisfaction score was observed in the side-effect subscale, with a median (IQR) of 10 (9–11) [Table  4 ].

Two hundred and seventy-nine (70.3%) cancer patients were found to be satisfied with cancer pain treatment (CI = 65.6−74.6%). The highest satisfaction rate was observed in the “side-effects” subscale, to which 343 (86.4%) responded satisfied [Fig.  1 ]. A Spearman’s correlation test revealed that there were correlations among the subscales of LMSQ; and the strongest positive correlation was observed between effectivity and healthcare workers subscale (r s = 0.7, p  < 0.0001). The correlation among the subscales is illustrated in a heatmap [Fig.  2 ].

Patient satisfaction with cancer pain treatment with each LMSQ subclass, n  = 397

A heatmap showing the Spearman correlation of each subclass of pain treatment satisfaction, n  = 397

Factors associated with patient satisfaction with cancer pain treatment

In the bivariable binary logistic regression analysis, marital status, stage of cancer, types of cancer treatment, severity of pain in the last 24 h, current pain severity, types of analgesics, and pain management index met the threshold of P-value < 0.2 to be included into the final multivariable binary logistic regression analysis. In the final analysis, marital status, current pain severity, and pain management index were significantly associated with patient satisfaction (P-value < 0.05). Married and single cancer patients had higher odds of being satisfied with cancer pain treatment compared to divorced patients (AOR = 5.6, CI, 2.6–12.0, P  < 0.001), (AOR = 3.5, CI = 1.3–9.7, P  = 0.017), respectively. The odds of being satisfied with cancer pain treatment among patients who received adequate pain management were more than two times greater than those who received inadequate pain management (AOR = 2.4, CI = 1.1–5.3, P  = 0.03). Patients who reported a lesser severity of current pain were nearly three times more likely to be satisfied with cancer pain treatment (AOR = 2.6, CI = 1.5–4.8, P  < 0.001) [Table  5 ].

The objective of the present study was to assess patients’ satisfaction with cancer pain treatment at adult oncologic centers. Our study revealed that most cancer patients (70.3%) have been satisfied with cancer pain treatment. This is consistent with studies done by Kaggwa et al. and Mazzotta et al. [ 16 , 26 ]. Whereas, it is a higher rate of satisfaction compared to other studies that reported 33.0% [ 27 ] and 47.7% [ 28 ] of satisfaction. The differences might be possibly explained by the use of different pain and satisfaction assessment tools, the greater inclusion (about 70%) of patients with advanced stages of cancer, the duration of cancer pain treatment, and the adequacy of pain management. In the current study, only 19.6% of patients have been diagnosed with stage IV cancer: patients should take treatment at least for a month, and over 80% of patients have received adequate pain management according to PMI. However, some studies have reported higher rates of satisfaction with cancer pain treatment [ 15 , 29 ]. The possible reason for the discrepancy might be the greater (over 40%) use of strong opioid analgesics in the previous studies. Strong opioids were prescribed only for 8.6% of patients in our study. Due to the complex pathophysiology, cancer pain involves multiple pain pathways. Hence, multimodal analgesia in combination with strong opioids is vital in cancer pain management [ 30 ]. Furthermore, the use of epidural analgesia could be another reason for higher rates of satisfaction [ 29 ].

Regarding satisfaction with subscales of LMSQ, about 80% of patients were satisfied with the information provided by the healthcare providers [ 27 ]. In our study; 67.8% of patients were satisfied with the education provided by healthcare providers about their disease and treatment. In contrast, a higher proportion of participants were satisfied with information provision in a study conducted by Kharel et al. [ 29 ]. Furthermore, we observed the lowest satisfaction rate in the daily life subscale. About 48% of cancer patients were not satisfied with their daily lives after receiving analgesic treatment for cancer pain.

Married and single (never married) cancer patients were found to have higher odds of being satisfied with cancer pain treatment as compared to divorced cancer patients. These findings could be explained by the presence of better social support from family or loved ones. Better social support can enhance positive coping mechanisms, increase a sense of well-being, and decrease anxiety and depression. It also improves a sense of societal vitality and results in higher patient’ satisfaction [ 31 , 32 ].

Patients who had a lower pain score were satisfied compared to those who reported a higher pain score, and this is supported by multiple previous studies [ 16 , 26 , 27 , 29 , 33 , 34 ]. This could be explained by the negative impacts of pain on physical function, sleep, mood, and wellbeing [ 35 ]. Moreover, higher pain severity scores could increase financial expenses because of unnecessary or avoidable emergency department visits; and has a consequence of dissatisfaction [ 23 ]. On the contrary, there are studies that state pain severity does not affect patients’ satisfaction [ 36 , 37 ].

Positive PMI scores were significantly associated with cancer pain treatment satisfaction. Patients who received adequate pain management were highly likely to be satisfied with cancer pain treatment. This finding is similar to that of a study done in Taiwan [ 38 ]. However, a study conducted by Kaggwa et al. has denied any association between PMI scores and cancer pain satisfaction [ 16 ].

Satisfaction with healthcare workers and effectivity of analgesics

This study showed that there was a moderately positive correlation between satisfaction with healthcare workers and satisfaction with patients’ perceived effectiveness of analgesics. This might be explained by a positive relationship between healthcare professionals and patients receiving cancer pain treatment. Healthcare providers who provide health education regarding the effectiveness of analgesics may improve patients’ adherence to the prescribed analgesic agent and improve patients’ perceived satisfaction with the effectiveness of analgesics. A systematic review showed that the hope and positivity of healthcare professionals were important for patients to cope with cancer and increase satisfaction with care [ 39 ]. Increased patient satisfaction with care provided by healthcare workers may change attitude of patients who accepted cancer pain as God’s wisdom or punishment and create a positive attitude toward the effectiveness of analgesics [ 40 ]. Another study supported this finding and stated that healthcare providers who deliver health education regarding the prevention of drug addiction, side effects of analgesics, timing, and dosage of analgesics improve patient attitude and cancer pain treatment [ 41 ].

Correlation of each subclass of cancer pain treatment satisfaction

A Spearman correlation was run to assess the correlation of each subclass of LMSQ using the total sample. There was strong positive correlation (r s = 0.5–0.64) between most of LMSQ subclass at p  < 0.01.

A cross-sectional study stated that the effectiveness of analgesic, efficacy of medication and patient healthcare provider communication were associated with patient satisfaction [ 42 ]. In this study, 58.2% of patients were satisfied with the practicability of analgesic medications. Comparable to this study, a cross-sectional study stated that patients who were prescribed convenient, fast-acting medications were more satisfied [ 43 ]. Another study stated that 100% of patients who received sufficient information on analgesic treatment and 97.9% of patients who received sufficient information about the side effects of analgesic treatment were satisfied with cancer pain management [ 44 ]. Patients who were satisfied with their pain levels reported statistically lower mean pain scores (2.26 ± 1.70) compared to those not satisfied (4.68 ± 2.07) or not sure (4.21 ± 2.21) [ 27 ]. This may be explained by the impact of pain on daily activity. Patients who report a lower average pain score may have a lower impact of pain on physical activity compared to those who report a higher mean pain score. Another study also supports this evidence and states that patients who reported a severe pain score and lower quality of life had lower satisfaction with the treatment received [ 45 ].

As a secondary outcome, only 16% of patients were diagnosed to have stage I cancer. This finding could indirectly indicate that there were delays in cancer diagnosis at earlier stage. Further studies may be required to underpin this finding.

In this study, baseline pain before analgesic treatment was not assessed and documented. As a cross-sectional study, we could not draw a cause-and-effect conclusion. Since questions that were used to measure oncologic pain treatment satisfaction were self-reported, answers to each question might not be trustful. The expectation and opinion of the interviewer also might affect the result of the study. These could be potential limitations of the study.

Conclusions

Despite the fact that most cancer patients reported moderate to severe pain, there was a high rate of satisfaction with cancer pain treatment. It would be better if hospitals, healthcare professionals, and administrators took measures to enhance the use of multimodal analgesia in combination with strong opioids to ensure adequate pain management, lower pain severity scores, and better daily life. We also urge the arrangement of better social support mechanisms for cancer patients, the improvement of information provision, and the deployment of professionals who have trained in pain management discipline at cancer care centres.

Data availability

Data and materials used in this study are available and can be presented by the corresponding author upon reasonable request.

Abbreviations

Adjusted Odds Ratio

Crude Odds Ratio

Confidence Interval

Dessie Compressive and Specialized Hospital

Felege-Hiwot Compressive and Specialized Hospital

Inter-quartile Range

Lubeck Medication Satisfaction Questionnaire

Numerical Rating Scale

Pain Management Index

Standard Deviation

Tibebe-Ghion Compressive and Specialized Hospital

University of Gondar Compressive and Specialized Hospital

World health organization

Raja SN, Carr DB, Cohen M, Finnerup NB, Flor H, Gibson S, et al. The revised International Association for the study of Pain definition of pain: concepts, challenges, and compromises. Pain. 2020;161(9):1976–82.

Article   PubMed   PubMed Central   Google Scholar  

Brown MR, Ramirez JD, Farquhar-Smith P. Pain in cancer survivors. Br J pain. 2014;8(4):139–53.

Hochstenbach LM, Joosten EA, Tjan-Heijnen VC, Janssen DJ. Update on Prevalence of Pain in Patients With Cancer: Systematic Review and Meta-Analysis. Journal of pain and symptom management. 2016;51(6):1070-90.e9.

Snijders RAH, Brom L, Theunissen M, van den Beuken-van Everdingen MHJ. Update on Prevalence of Pain in patients with Cancer 2022: a systematic literature review and Meta-analysis. Cancers. 2023;15(3).

Falk S, Dickenson AH. Pain and nociception: mechanisms of cancer-induced bone pain. J Clin Oncol. 2014;32(16):1647–54.

Article   CAS   PubMed   Google Scholar  

Gibson S, McConigley R. Unplanned oncology admissions within 14 days of non-surgical discharge: a retrospective study. Support Care Cancer. 2016;24:311–7.

Article   PubMed   Google Scholar  

Oliveira KG, von Zeidler SV, Podestá JRV, Sena A, Souza ED, Lenzi J, et al. Influence of pain severity on the quality of life in patients with head and neck cancer before antineoplastic therapy. BMC Cancer. 2014;14(1):39.

Smith MD, Meredith PJ, Chua SY. The experience of persistent pain and quality of life among women following treatment for breast cancer: an attachment perspective. Psycho-oncology. 2018;27(10):2442–9.

Zylla D, Steele G, Gupta P. A systematic review of the impact of pain on overall survival in patients with cancer. Support Care Cancer. 2017;25(5):1687–98.

Greco MT, Roberto A, Corli O, Deandrea S, Bandieri E, Cavuto S, et al. Quality of cancer pain management: an update of a systematic review of undertreatment of patients with cancer. J Clin Oncol. 2014;32(36):4149–54.

Baker TA, Krok-Schoen JL, O’Connor ML, Brooks AK. The influence of pain severity and interference on satisfaction with pain management among middle-aged and older adults. Pain Research and Management. 2016;2016.

Baker TA, O’Connor ML, Roker R, Krok JL. Satisfaction with pain treatment in older cancer patients: identifying variants of discrimination, trust, communication, and self-efficacy. J Hospice Palliat Nursing: JHPN: Official J Hospice Palliat Nurses Association. 2013;15(8).

Naidu A. Factors affecting patient satisfaction and healthcare quality. Int J Health care Qual Assur. 2009.

Davies A, Zeppetella G, Andersen S, Damkier A, Vejlgaard T, Nauck F, et al. Multi-centre European study of breakthrough cancer pain: pain characteristics and patient perceptions of current and potential management strategies. Eur J Pain. 2011;15(7):756–63.

Thinh DHQ, Sriraj W, Mansor M, Tan KH, Irawan C, Kurnianda J et al. Patient and physician satisfaction with analgesic treatment: findings from the analgesic treatment for cancer pain in Southeast Asia (ACE) study. Pain Research and Management. 2018;2018.

Kaggwa AT, Kituyi PW, Muteti EN, Ayumba RB. Cancer-related Bone Pain: patients’ satisfaction with analgesic Pain Control. Annals Afr Surg. 2022;19(3):144–52.

Article   Google Scholar  

Adugna DG, Ayelign AA, Woldie HF, Aragie H, Tafesse E, Melese EB et al. Prevalence and associated factors of cancer pain among adult cancer patients evaluated at the Oncology unit in the University of Gondar Comprehensive Specialized Hospital, Northwest Ethiopia. Front Pain Res.3:231.

Tuem KB, Gebremeskel L, Hiluf K, Arko K, Hailu HG. Adequacy of cancer-related pain treatments and factors affecting proper management in Ayder Comprehensive Specialized Hospital, Mekelle, Ethiopia. Journal of Oncology. 2020;2020.

Matrisch L, Rau Y, Karsten H, Graßhoff H, Riemekasten G. The Lübeck medication satisfaction Questionnaire—A Novel Measurement Tool for Therapy satisfaction. J Personalized Med. 2023;13(3):505.

Bayable SD, Ahmed SA, Lema GF, Yaregal Melesse D. Assessment of Maternal Satisfaction and Associated Factors among Parturients Who Underwent Cesarean Delivery under Spinal Anesthesia at University of Gondar Comprehensive Specialized Hospital, Northwest Ethiopia, 2019. Anesthesiology research and practice. 2020;2020:8697651.

Breivik H, Borchgrevink P-C, Allen S-M, Rosseland L-A, Romundstad L, Breivik Hals E, et al. Assessment of pain. BJA: Br J Anaesth. 2008;101(1):17–24.

Tegegn HG, Gebreyohannes EA. Cancer Pain Management and Pain Interference with Daily Functioning among Cancer patients in Gondar University Hospital. Pain Res Manage. 2017;2017:5698640.

Shen W-C, Chen J-S, Shao Y-Y, Lee K-D, Chiou T-J, Sung Y-C, et al. Impact of undertreatment of cancer pain with analgesic drugs on patient outcomes: a nationwide survey of outpatient cancer patient care in Taiwan. J Pain Symptom Manag. 2017;54(1):55–65. e1.

Gordon DB, Polomano RC, Pellino TA, Turk DC, McCracken LM, Sherwood G, et al. Revised American Pain Society Patient Outcome Questionnaire (APS-POQ-R) for quality improvement of pain management in hospitalized adults: preliminary psychometric evaluation. J Pain. 2010;11(11):1172–86.

Thronæs M, Balstad TR, Brunelli C, Løhre ET, Klepstad P, Vagnildhaug OM, et al. Pain management index (PMI)—does it reflect cancer patients’ wish for focus on pain? Support Care Cancer. 2020;28:1675–84.

Mazzotta M, Filetti M, Piras M, Mercadante S, Marchetti P, Giusti R. Patients’ satisfaction with breakthrough cancer pain therapy: A secondary analysis of IOPS-MS study. Cancer Manage Res. 2022:1237–45.

Golas M, Park CG, Wilkie DJ. Patient satisfaction with Pain Level in patients with Cancer. Pain Manage Nursing: Official J Am Soc Pain Manage Nurses. 2016;17(3):218–25.

Tang ST, Tang W-R, Liu T-W, Lin C-P, Chen J-S. What really matters in pain management for terminally ill cancer patients in Taiwan. J Palliat Care. 2010;26(3):151–8.

Kharel S, Adhikari I, Shrestha K. Satisfaction on Pain Management among Cancer patient in selected Cancer Care Center Bhaktapur Nepal. Int J Med Sci Clin Res Stud. 2023;3(4):597–603.

Breivik H, Eisenberg E, O’Brien T. The individual and societal burden of chronic pain in Europe: the case for strategic prioritisation and action to improve knowledge and availability of appropriate care. BMC Public Health. 2013;13:1–14.

Gonzalez-Saenz de Tejada M, Bilbao A, Baré M, Briones E, Sarasqueta C, Quintana J, et al. Association between social support, functional status, and change in health‐related quality of life and changes in anxiety and depression in colorectal cancer patients. Psycho‐oncology. 2017;26(9):1263–9.

Yoo H, Shin DW, Jeong A, Kim SY, Yang H-k, Kim JS, et al. Perceived social support and its impact on depression and health-related quality of life: a comparison between cancer patients and general population. Jpn J Clin Oncol. 2017;47(8):728–34.

Hanna MN, González-Fernández M, Barrett AD, Williams KA, Pronovost P. Does patient perception of pain control affect patient satisfaction across surgical units in a tertiary teaching hospital? Am J Med Qual. 2012;27(5):411–6.

Naveh P. Pain severity, satisfaction with pain management, and patient-related barriers to pain management in patients with cancer in Israel. Number 4/July 2011. 2011;38(4):E305–13.

Google Scholar  

Black B, Herr K, Fine P, Sanders S, Tang X, Bergen-Jackson K, et al. The relationships among pain, nonpain symptoms, and quality of life measures in older adults with cancer receiving hospice care. Pain Med. 2011;12(6):880–9.

Kelly A-M. Patient satisfaction with pain management does not correlate with initial or discharge VAS pain score, verbal pain rating at discharge, or change in VAS score in the emergency department. J Emerg Med. 2000;19(2):113–6.

Lin J, Hsieh RK, Chen JS, Lee KD, Rau KM, Shao YY, et al. Satisfaction with pain management and impact of pain on quality of life in cancer patients. Asia-Pac J Clin Oncol. 2020;16(2):e91–8.

Su W-C, Chuang C-H, Chen F-M, Tsai H-L, Huang C-W, Chang T-K, et al. Effects of Good Pain Management (GPM) ward program on patterns of care and pain control in patients with cancer pain in Taiwan. Support Care Cancer. 2021;29(4):1903–11.

Prip A, Møller KA, Nielsen DL, Jarden M, Olsen M-H, Danielsen AK. The patient–healthcare professional relationship and communication in the oncology outpatient setting: a systematic review. Cancer Nurs. 2018;41(5):E11.

Orujlu S, Hassankhani H, Rahmani A, Sanaat Z, Dadashzadeh A, Allahbakhshian A. Barriers to cancer pain management from the perspective of patients: a qualitative study. Nurs open. 2022;9(1):541–9.

Uysal N. Clearing barriers in Cancer Pain Management: roles of nurses. Int J Caring Sci. 2018;11(2).

Beck SL, Towsley GL, Berry PH, Lindau K, Field RB, Jensen S. Core aspects of satisfaction with pain management: cancer patients’ perspectives. J Pain Symptom Manag. 2010;39(1):100–15.

Wada N, Handa S, Yamamoto H, Higuchi H, Okamoto K, Sasaki T, et al. Integrating Cancer patients’ satisfaction with Rescue Medication in Pain assessments. Showa Univ J Med Sci. 2020;32(3):181–91.

Antón A, Montalar J, Carulla J, Jara C, Batista N, Camps C, et al. Pain in clinical oncology: patient satisfaction with management of cancer pain. Eur J Pain. 2012;16(3):381–9.

Valero-Cantero I, Casals C, Espinar-Toledo M, Barón-López FJ, Martínez-Valero FJ, Vázquez-Sánchez MÁ. Cancer Patients&rsquo; Satisfaction with In-Home Palliative Care and Its Impact on Disease Symptoms. Healthcare. 2023;11(9):1272.

Download references

Acknowledgements

We would like to acknowledge the University of Gondar Comprehensive Specialized Hospital, Tibebe-Ghion Comprehensive Specialized Hospital, Felege-Hiwot Comprehensive Specialized Hospital, Dessie Comprehensive Specialized Hospital. We would also want to acknowledge Ludwig Matrisch from the Department of Rheumatology and Clinical Immunology, Universität zu Lübeck, 23562 Lübeck, Germany for supporting us on the utilization of the Lübeck Medication Satisfaction Questionnaire (LMSQ) [email protected],

This study was supported by University of Gondar and Debre Birhan University with no conflict of interest. The support did not include publication charges.

Author information

Authors and affiliations.

Department of Anesthesia, Debre Birhan University, Debre Birhan, Ethiopia

Molla Amsalu

Department of Anaesthesia, University of Gondar, Gondar, Ethiopia

Henos Enyew Ashagrie, Amare Belete Getahun & Yophtahe Woldegerima Berhe

You can also search for this author in PubMed   Google Scholar

Contributions

‘’M.A. has conceptualized the study and objectives; and developed the proposal. Y.W.B., H.E.A., and A.B.G. criticized the proposal. All authors had participated in the data management and statistical analyses. Y.W.B, M.A., and H.E.A. have prepared the final manuscript. All authors read and approved the final manuscript.‘’.

Corresponding author

Correspondence to Yophtahe Woldegerima Berhe .

Ethics declarations

Ethics approval and consent to participate.

Ethical approval was obtained from the Ethical Review Committee of the School of Medicine, at the University of Gondar ( Reference number: CMHS/SM/06/01/4097/2015, Date: March 24, 2023 ). Permission support letters were obtained from FHCSH, TGCSH, and DCSH. Written informed consent was obtained from each participant after detailed explanations about the study. Informed consent with a fingerprint signature was obtained from patients who could not read or write after detailed explanations by the data collectors as approved by the Ethical Review Committee of the School of Medicine, at the University of Gondar.

Consent for publication

Not applicable; this article does not include any personal details of any participant.

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note.

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/ . The Creative Commons Public Domain Dedication waiver ( http://creativecommons.org/publicdomain/zero/1.0/ ) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Cite this article.

Amsalu, M., Ashagrie, H.E., Getahun, A.B. et al. Patients’ satisfaction with cancer pain treatment at adult oncologic centers in Northern Ethiopia; a multi-center cross-sectional study. BMC Cancer 24 , 647 (2024). https://doi.org/10.1186/s12885-024-12359-7

Download citation

Received : 17 October 2023

Accepted : 08 May 2024

Published : 27 May 2024

DOI : https://doi.org/10.1186/s12885-024-12359-7

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Cancer pain treatment
• Treatment satisfaction
• Cancer pain

ISSN: 1471-2407

• Submission enquiries: [email protected]
• General enquiries: [email protected]