latex documentclass bachelor thesis

because LaTeX matters

Writing a thesis in latex.

Writing a thesis is a time-intensive endeavor. Fortunately, using LaTeX, you can focus on the content rather than the formatting of your thesis. The following article summarizes the most important aspects of writing a thesis in LaTeX, providing you with a document skeleton (at the end) and lots of additional tips and tricks.

Document class

The first choice in most cases will be the report document class:

See here for a complete list of options. Personally, I use draft a lot. It replaces figures with a box of the size of the figure. It saves you time generating the document. Furthermore, it will highlight justification and hyphenation errors ( Overfull \hbox ).

Check with your college or university. They may have an official or unofficial template/class-file to be used for writing a thesis.

Again, follow the instructions of your institution if there are any. Otherwise, LaTeX provides a few basic command for the creation of a title page.

Use \today as \date argument to automatically generate the current date. Leave it empty in case you don’t want the date to be printed. As shown in the example, the author command can be extended to print several lines.

For a more sophisticated title page, the titlespages package has a nice collection of pre-formatted front pages. For different affiliations use the authblk package, see here for some examples.

Contents (toc/lof/lot)

Nothing special here.

The tocloft package offers great flexibility in formatting contents. See here for a selection of possibilities.

Often, the page numbers are changed to roman for this introductory part of the document and only later, for the actual content, arabic page numbering is used. This can be done by placing the following commands before and after the contents commands respectively.

LaTeX provides the abstract environment which will print “Abstract” centered as a title.

The actual content

The most important and extensive part is the content. I strongly suggest to split up every chapter into an individual file and load them in the main tex-file.

In thesis.tex:

In chapter1.tex:

This way, you can typeset single chapters or parts of the whole thesis only, by commenting out what you want to exclude. Remember, the document can only be generated from the main file (thesis.tex), since the individual chapters are missing a proper LaTeX document structure.

See here for a discussion on whether to use \input or \include .

Bibliography

The most convenient way is to use a bib-tex file that contains all your references. You can download bibtex items for articles, books, etc. from Google scholar or often directly from the journal websites.

Two packages are commonly used to personalize bibliographies, the newer biblatex and the natbib package, which has been around for many years. These packages offer great flexibility in customizing the look of a bibliography, depending on the preference in the field or the author.

Other commonly used packages

• graphicx : Indispensable when working with figures/graphs.
• subfig : Controlling arrangement of several figures (e.g. 2×2 matrix)
• minitoc : Adds mini table of contents to every chapter
• nomencl : Generate and format a nomenclature
• listings : Source code printer for LaTeX
• babel : Multilingual package for standard document classes
• fancyhdr : Controlling header and footer
• hyperref : Hypertext links for LaTeX
• And many more

Minimal example code

I’m aware that this short post on writing a thesis only covers the very basics of a vast topic. However, it will help you getting started and focussing on the content of your thesis rather than the formatting of the document.

Share this:

16 comments.

8. June 2012 at 7:09

I would rather recommend a documentclass like memoir or scrreprt (from KOMA-Script), since they are much more flexible than report.

8. June 2012 at 8:12

I agree, my experience with them is limited though. Thanks for the addendum. Here is the documentation: memoir , scrreprt (KOMA script)

8. June 2012 at 8:02

Nice post Tom. I’m actually writing a two-part (or three) on Writing the PhD thesis: the tools . Feel free to comment, I hope to update it as I write my thesis, so any suggestions are welcome.

8. June 2012 at 8:05

Thanks for the link. I just saw your post and thought I should really check out git sometimes :-). Best, Tom.

8. June 2012 at 8:10

Yes, git is awesome. It can be a bit overwhelming with all the options and commands, but if you’re just working alone, and probably on several machines, then you can do everything effortlessly with few commands.

11. June 2012 at 2:15

That’s what has kept me so far. But I’ll definitely give it a try. Thanks!

8. June 2012 at 8:08

What a great overview. Thank you, this will come handy… when I finally get myself to start writing that thesis 🙂

8. June 2012 at 14:12

Thanks and good luck with your thesis! Tom.

9. June 2012 at 4:08

Hi, I can recommend two important packages: lineno.sty to insert linenumbers (really helpful in the debugging phase) and todonotes (allows you to insert todo-notes for things you still have to do.)

11. June 2012 at 0:48

Thanks Uwe! I wrote an article on both, lineno and todonotes . Here is the documentation: lineno and todonotes for more details.

12. June 2012 at 15:51

Thanks for the post, i’m currently writing my master thesis 🙂

A small note: it seems that subfig is deprecated for the subcaption package: https://en.wikibooks.org/wiki/LaTeX/Floats,_Figures_and_Captions#Subfloats

12. June 2012 at 16:05

Hey, thanks for the tip. Too bad they don’t say anything in the documentation apart from the fact that the packages are not compatible.

1. August 2012 at 21:11

good thesis template can be also found here (free): http://enjobs.org/index.php/downloads2

including living headers, empty pages, two-sided with front and main matter as well as a complete structure

2. August 2012 at 11:03

Thanks for the link to the thesis template!

15. November 2012 at 22:21

Hi Tom, I’m writing a report on spanish in LaTex, using emacs, auctex, aspell (~170pags. ~70 files included by now) and this blog is my savior every time because I’m quite new with all these.

The question: Is there anyway (other than \- in every occurrence) to define the correct hyphenation for accented words (non english characters like é)? I have three o four accented words, about the subject of my report, that occur near 100 times each, across several files, and the \hyphenation{} command can’t handle these.

20. November 2012 at 3:47

I was wondering what packages you load in your preamble. For a better hyphenation (and easier typing), you should use these packages:

See here for more details.

If this doesn’t help, please provide a minimal working example to illustrate the problem.

Thanks, Tom.

Leave a Reply Cancel reply

• Future Students
• Parents and Families

College of Engineering

• Research and Facilities
• Departments

Guide to Writing Your Thesis in LaTeX

Step 4: configure the options specific to your thesis.

At this point, it is assumed that you have a working LaTeX distribution, an editor, have downloaded and installed the necessary template files, and confirmed that you can build this sample thesis . If not, do that first. Now we will explain how to set things like the title, the author name, and whether it is a masters thesis or a doctoral dissertation.

Start by opening the file thesis.tex in your editor.

Setting the Class Options

The first line of the file will be:

This tells LaTeX to use the urithesis document class with all default options. There are many options that that can be given, but for now we will only concern ourselves with one.

If this is a Ph.D. dissertation, change the first line to be:

Setting the Title and Author

To set the title, you use the command:

Make sure to use proper capitalization.

Since you will be the author, set your name using the command:

The tilde between the middle initial and the last name tells LaTeX that the period does not indicate the end of a sentence, and to use a normal interword space.

The Bibliography Source File

The references will come from one or more .bib files that you create. This is the only type of file without a .tex extension that you will need to edit. The line:

tells BibTeX to look in the file references.bib for references cited in the thesis. The argument to the \reffile command can be a comma separated list of files (without the .bib extension), and it will look in all of those files.

The Preliminary Material

The pages that come before the first chapter are called the preliminary material. See the page Guidelines for the Format of Theses and Dissertations , on the Graduate School’s web site, for more information about the preliminary material. The preliminary material includes, in this order:

The automatic sections will be generated automatically, and you need not worry about them. The List of Tables and List of Figures sections will only be generated if the thesis contains any tables or figures, respectively. The argument to the command to include the four manual sections, is the name of the .tex file that contains the content for that section, without the .tex extension. For example the abstract is included with the command:

which means it will us the contents of the file abstract.tex as the abstract. The file abstract.tex should contain only the text of the abstract, as the title will be generated automatically.

The Chapters

Chapters are included with the command:

which will include the file chapterN.tex in the thesis. There should be one \newchapter{} command for each chapter of the thesis.

The chapter source files should each begin with the command

followed by the contents of the chapter.

The Appendices

Appendices are optional, but if present, they are included with the command:

which will include the file appendixN.tex in the thesis. There should be a \newappendix{} command for each appendix of the thesis.

The main difference between appendices and chapters, are that chapters are numbered starting with 1, while appendices start with the letter A. The contents of an appendix is identical to that of a chapter. Each appendix source file should begin with the command:

command, just like with chapters.

Additional Considerations

By default, the department named on the title page is Electrical Engineering, but that can be changed by using the command:

before any of the chapters are included.

The year that the thesis is generated is displayed on the title page and approval page, but the Graduate School requires that year must be the year of your official graduation. To set that date to a specific year, other than the current year, use the command:

before the \begin{document} command.

home | writing | TIL | now | about

Writing a thesis in latex.

This article is a guide to constructing a decent parent file for a thesis or dissertation compiled in Latex. The specific details implemented here, and included in the example files, are those set out by the guidelines for submission to the University of Nottingham, but can be easily amended to suit any sensible requirements.

Considerable attention has been paid to presenting the final document as a PDF file, which keeps the file size manageable (compared to postscript) and allows groovy add-ons such as hyperlinks and back-referencing. However, several hacks are required to attain good functionality from your PDF file and these can give the latex code a mysterious (and messy) appearance in places. While I highly recommend the inclusion of the PDF-related commands, they are not strictly necessary and can be ignored especially if you are new to Latex.

Note for Windows users

The code outlined below was designed and implemented on the unix system at Nottingham. For those of you unfortunate enough to be running a Windows box, a number of problems may arise when using the below code:

First off, not all the packages used will be present and will need to be installed. Probably the easiest way to do this is to google the package name with the extension .sty and save this file in the C:\VTEX\l2e\\ directory of your machine. Note that for the natbib package, you will also need to download the relevant .bst file, which in this case is unsrtnat.bst .

Also, many of the packages that are installed locally may need updating. For instance, the computers I have tested on both have old versions of the geometry and caption packages, which cause Latex to return errors. To resolve these problems, either download the latest versions, or remove the includefoot option from the geometry package and set the bottom margin to 1.4in.

Also, the code for compiling to PDF does not work so well in Windows, and so it is recommended that Windows users use the template without PDF code.

Requirements

The guidelines for theses to be submitted to the University of Nottingham specify that:

• the document should be presented on single-sided a4 paper and typeset in a double-spaced size 10-12 font;
• the left-hand margin should be at least 1.5 inches (4cm) to allow for binding;
• the other three margins should be at least 1 inch (2.5cm).

Other settings such as the way chapter headings are formatted, and whether headers are included, are not specified and are up to the user. In this case, we’ll install headers and tinker with the chapter formatting.

Template files

Here are the template files which this page explains:

• thesis_without_pdfcode.tex
• thesis_with_pdfcode.tex

The appearance of both these files on the printed page will be identical; however after compilation into PDF (see the section below) and opening in Adobe Acrobat (or a similar PDF reader), the advantages that come with the PDF format will be apparent.

• thesis_without_pdfcode.pdf
• thesis_with_pdfcode.pdf

The rest of this page is devoted to explaining the code in these files.

Document structure

The document begins in a standard and entirely self-explanatory manner.

Preamble: essential packages

Next, the essential packages are loaded:

where the geometry package has been loaded to allow the margins to be set in a neat and consistent way. The non-obvious option includefoot ensures that the footer (which only contains the pagenumber) is included in the page and is thus 1 inch above the bottom of the page. Note that this option is only available in recent versions of the package: if you’re using an old version and can’t/won’t upgrade, then remove the offending option and extend the bottom margin to 1.4in. headheight=13.6pt is included due to to ensure compatibility with the fancyhdr package (and is not required if you don’t use the fancyhdr package). Also quite essential is the natbib package:

where the various options ensure that references appear in the document as:

…boiled dog can do maths claims experimenter [10,12,15-18].

Alternative referencing styles are easily implemented, see the natbib help file for more details. In fact, to use the natbib package, you’ll have to read at least a few lines of the help file so you understand the difference between \citet and \citep , and I insist you do that now.

Preamble: custom captions (optional)

We now set the figure captions to be elegant and dignified:

Note that early versions of this package don’t support the margin= and tableposition= options; in this case, these trimmings will have to be ignored.

Preamble: custom fonts (optional)

You can also choose an alternative font for both the text and the mathematical characters. This can be achieved by:

Aside from mathpazo , there are several other fonts available, such as chancery , palatino and times (all loaded in the same way).

Preamble: fancy headers (optional)

Feeling a little devil-may-care? If so, you’ll probably want to install some elegant headers along each page. This is easily achieved through the fancyhdr package:

The final complicated-looking three lines simply ensure that the headings for appendices are formatted correctly. (Without these lines, what should read “Appendix A” is set as “Chapter A”.)

Preamble: customised chapter/section headings (optional)

We now make use of several customisation options that are bundled with the sectsty package.

These alter the appearance of the first page of each chapter to have a centred title, with the word “chapter” set in small capitals immediately above. Feel free to employ your own individual and highly refined tastes here in choosing your own chapter/section settings.

Preamble: pdf options (optional)

If you want to publish your thesis on the internet, or even just to email it to someone, then you’ll want to store it in the ubiquitous PDF format. Doing so offers some neat facilities, such as hyperlinking, which are implemented by the hyperref package:

There are various other options you can pass to your favourite PDF reader via the \hypersetup command, such as pdftitle , pdfauthor and pdfsubject ; however, they’re not really essential. Note that the hyperlink colours have all been set to black for consistent printing. Should you want to distribute your thesis over the web, then it would be advisable to set these colours to red or something similarly vibrant and exciting.

Things get a little messy now as a hack is required to ensure the hyperlinks actually jump to the right place.

No need to worry about this code, let’s just move straight on.

Preamble: page layout

We now set various parameters to alter the general page layout:

The first two of these commands alter the paragraph formatting so that new paragraphs are not indented but separated from the previous one by a small amount of whitespace; the third sets the line spacing. The sharp-eyed among you will notice the discrepancy between our chosen line-spacing and that dictated by the university guidelines. However, no matter how poor your eyesight is, you’ll quickly appreciate that true double line-spacing (set with \renewcommand(\baselinestretch}{2} ) looks rubbish. In addition, Nottingham University are perfectly happy to accept theses set with the above line-spacing, which is more pleasing to the eye.

Some final settings:

Set which chapters to include when Latex is next run. The advantage of this method is that all your cross-references are remembered and Latex does not spit out loads of warnings.

Main matter

We now begin the document in earnest and define a suitable title:

followed by a dedication:

We now construct an abstract:

some acknowledgements:

and a contents page:

Now, we alter the pagenumbering to arabic and point to the relevant chapter files:

All your chapter files should be included here; to save time when editing, use the \includeonly command to specify which chapters to compile.

Finally, we make sure there is a link to the references section in the table of contents and reference the correct bibiography file (which in this case is called bibliography.bib ).

And there we have it: a complete thesis parent file that not only looks good on the printed page, but is fully functional and hyperlinked in PDF format.

Compiling to PDF

Whether you’ve included all the red PDF commands or not, you can convert your TEX file to PDF by running (in unix):

The additional argument to ps2pdf is required as the default paper size is US Letter. Note that you will probably need to bibtex your thesis file before running latex for the final time.

For Windows, first open a command window by going Start->Run and entering cmd . Provided MiKTeX and GhostScript are correctly installed then the necessary commands are:

The syntax for ps2pdf is slightly different in Windows compared to Unix - and note that the output pdf filename MUST be specified, else the ps file is overwritten and corrupted.

Something wrong? Suggest an improvement or add a comment (see article history ) Tagged with: latex Filed in: guides

Previous: Tutorial: the complex Ginzburg-Landau equation Next: Following log files with tail -f

Copyright © 2005-2024 David Winterbottom Content licensed under CC BY-NC-SA 4.0 .

Generic Thesis Template

Buďte v kontaktu

Have you checked our knowledge base ?

Message sent! Our team will review it and reply by email.

Email: 

Navigation Menu

Search code, repositories, users, issues, pull requests..., provide feedback.

We read every piece of feedback, and take your input very seriously.

Saved searches

Use saved searches to filter your results more quickly.

To see all available qualifiers, see our documentation .

• Notifications You must be signed in to change notification settings

An NTNU thesis LaTeX document class for bachelor, master, and PhD theses

COPCSE-NTNU/thesis-NTNU

Folders and files.

Repository files navigation

Thesis-ntnu.

CoPCSE@NTNU – Community of Practice for Computer Science Education at the Norwegian University of Science and Technology – is an informal forum for lecturers in computer science and related fields across campuses and departments.

The current repository provides a LaTeX thesis template that should in principle be applicable for theses at all study levels – bachelor, master and PhD. It is closely based on the standard LaTeX report document class with added packages and customisations. The purpose of the document provided in thesis.tex is threefold. It should serve (i) as a description of the document class, (ii) as an example of how to use it, and (iii) as a thesis template.

The template does not have any official status, and it is not a general NTNU-level requirement to use it. It replaces previous templates like https://github.com/COPCSE-NTNU/bachelor-thesis-NTNU and https://github.com/COPCSE-NTNU/master-theses-NTNU .

You can use the template with Overleaf , and you are strongly encouraged to do so. The alternative is to install local copy of LaTeX on your laptop (not adviced, huge, difficult).

You should fork the CoPCSE repo so that you have your own files to edit and you can always merge with the upstream changes to the template, in case the template is updated.

Setup using Overleaf

There are two ways for setting up the Overleaf project with the template:

• Use the .zip copy and upload.
• Fork the the CoPCSE repo so that you have your own files to edit.

Building document locally

The template also provides a simple Makefile which allows you to build the document locally. This requires that you have a LaTeX compiler, such as texlive , installed locally, which has to provide the commands pdflatex and biber .

Contributors 9

• Makefile 1.3%

An academic thesis, also known as a dissertation, is a substantial work produced by a graduate student to communicate their research and earn a degree. A thesis will typically include a review of the current state of research in the field of study followed by a central hypothesis to be investigated. The bulk of the thesis will then focus on the methods and results of the research performed, followed by a discussion on how the results add to the field in general. Theses are long, highly structured and include a lot of advanced document elements.

This template is designed for writing books and graduate-level theses and provides numerous examples and documentation to enable complex requirements. The design features a relatively narrow main text column with an adjacent wide margin to house notes, figures, tables, citations and captions.

• View Template Information

Masters/Doctoral Thesis

This template provides a full framework for writing a graduate level thesis. It is carefully structured and separated into multiple parts for easy editing. Included are the following pages/sections: a cover page, declaration of authorship, quotation, abstract, acknowledgements, contents page(s), list of figures, list of tables, abbreviations, physical constants, symbols, dedication, example chapter, example appendix and bibliography.

Classicthesis Typographic Thesis

This template has been designed as a homage to the Elements of Typographic Style. As such, it has an air of efficiency and optimal design. It is suitable for any high-level degree thesis such as for a PhD, Masters or Honors. Sections within the thesis are clearly separated in a consistent way, as are sections within each chapter. The default structure of the thesis proceeds in the following order: title page, dedication, abstract, publications, acknowledgements, contents, list of tables/figures/listings, acronyms, content chapters, appendices, bibliography, colophon and declaration.

Maggi Memoir Thesis

This template uses the memoir document class to beautifully typeset a thesis. It is suitable for any high-level degree thesis such as for a PhD, Masters or Honors. The layout of the content is in a thin format to promote easy reading and the template features advanced specification of margins and trimming. The thesis boasts a professional look which is immediately obvious from the title page itself and carries through the design of the rest of the document. Three custom fonts are used in the template to match the design and beautifully display your content.

LaTeX Templates Information

General enquiries [email protected]

Most templates licensed under CC BY-NC-SA 4.0

LaTeX Templates is developed in New Zealand

© Creodocs Limited. All Rights Reserved.

Stack Exchange Network

Stack Exchange network consists of 183 Q&A communities including Stack Overflow , the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.

Q&A for work

Connect and share knowledge within a single location that is structured and easy to search.

Which document class should I use for a thesis proposal?

I am writing a proposal for a semester of paper reading and small projects that will result in a thesis proposal. The proposal will include 1) a thesis general thesis topic 2) specialized training 3) a reading list 4) a timeline. Which document class best fits this sort of document?

• document-classes

• article should do. Welcome to TeX.SX! –  jub0bs Commented Jan 5, 2014 at 20:40
• 1 You can use the standard article class. Also you can use the scrartcl class from the KOMA Script bundle (is like article but improved and more flexible), also you can try with the tufte-handout . I think all those works fine four your requirements. –  Aradnix Commented Jan 5, 2014 at 20:47
• 5 I would start with article. Probably it does what you need and you can add packages according to your particular requirements. If, along the way, you find something else would work better, you can always switch at that point. The main thing is to start writing the content and not distract yourself thinking about the formatting. (Believe me, I know!) –  cfr Commented Jan 5, 2014 at 20:51
• Thanks, guys! All very helpful info (only on my second LaTeX doc), and fast responses too! –  user2073068 Commented Jan 5, 2014 at 21:16

According to @cfr, article class is an obviously good starting point.

However, if you are in control of the document layout (that is, you should not adhere to a template) and want something more fancy, I'd suggest you the tufte-latex document class ( available on ctan ).

I recently wrote a proposal with the same purpose as yours, and --besides the proposal content itself-- it was very well received.

The sample-handout.pdf is a nice display of all the class features.

You must log in to answer this question.

Not the answer you're looking for browse other questions tagged document-classes ..

• The Overflow Blog
• Where does Postgres fit in a world of GenAI and vector databases?
• Featured on Meta
• We've made changes to our Terms of Service & Privacy Policy - July 2024
• Bringing clarity to status tag usage on meta sites

Hot Network Questions

• Using "no" at the end of a statement instead of "isn't it"?
• Regression techniques for a “triangular” scatterplot
• Plotting orbitals on a lattice
• Has a tire ever exploded inside the Wheel Well?
• Is having negative voltages on a MOSFET gate a good idea?
• What to call a test that consists of running a program with only logging?
• DATEDIFF Rounding
• How to remove obligation to run as administrator in Windows?
• A very interesting food chain
• Raspberry Screen Application
• Why do National Geographic and Discovery Channel broadcast fake or pseudoscientific programs?
• Do the amplitude and frequency of gravitational waves emitted by binary stars change as the stars get closer together?
• Are quantum states like the W, Bell, GHZ, and Dicke state actually used in quantum computing research?
• Integral concerning the floor function
• If inflation/cost of living is such a complex difficult problem, then why has the price of drugs been absoultly perfectly stable my whole life?
• Meaning of "blunk"
• Is there a faster way of expanding multiple polynomials with power?
• Stuck on Sokoban
• (Auto)-linebreaking a long formula in align environment or with breqn package
• Too many \setmathfont leads to "Too many symbol fonts declared" error
• The size of elementary particles
• The answer is not wrong
• "TSA regulations state that travellers are allowed one personal item and one carry on"?
• The meaning of "by" in "swear by God"

Templates — Thesis

Templates tagged Thesis

Show all Templates

Your thesis or dissertation is often the most important single piece of work you’ll produce as a student (whether it be your final year undergraduate research project or your complete Masters / PhD thesis). These templates, many provided by the university themselves as official layout guidelines, include sections for you to add all the relevant author information (your university, department, supervisor, year, etc) along with placeholder chapters for your introduction, background, method, results, conclusion / discussion, references and appendices.

Related Tags

Get in touch.

Have you checked our knowledge base ?

Message sent! Our team will review it and reply by email.

Email: