short definition for alternative hypothesis

Have a thesis expert improve your writing

Check your thesis for plagiarism in 10 minutes, generate your apa citations for free.

• Knowledge Base
• Null and Alternative Hypotheses | Definitions & Examples

Null and Alternative Hypotheses | Definitions & Examples

Published on 5 October 2022 by Shaun Turney . Revised on 6 December 2022.

The null and alternative hypotheses are two competing claims that researchers weigh evidence for and against using a statistical test :

• Null hypothesis (H 0 ): There’s no effect in the population .
• Alternative hypothesis (H A ): There’s an effect in the population.

The effect is usually the effect of the independent variable on the dependent variable .

Table of contents

Answering your research question with hypotheses, what is a null hypothesis, what is an alternative hypothesis, differences between null and alternative hypotheses, how to write null and alternative hypotheses, frequently asked questions about null and alternative hypotheses.

The null and alternative hypotheses offer competing answers to your research question . When the research question asks “Does the independent variable affect the dependent variable?”, the null hypothesis (H 0 ) answers “No, there’s no effect in the population.” On the other hand, the alternative hypothesis (H A ) answers “Yes, there is an effect in the population.”

The null and alternative are always claims about the population. That’s because the goal of hypothesis testing is to make inferences about a population based on a sample . Often, we infer whether there’s an effect in the population by looking at differences between groups or relationships between variables in the sample.

You can use a statistical test to decide whether the evidence favors the null or alternative hypothesis. Each type of statistical test comes with a specific way of phrasing the null and alternative hypothesis. However, the hypotheses can also be phrased in a general way that applies to any test.

The null hypothesis is the claim that there’s no effect in the population.

If the sample provides enough evidence against the claim that there’s no effect in the population ( p ≤ α), then we can reject the null hypothesis . Otherwise, we fail to reject the null hypothesis.

Although “fail to reject” may sound awkward, it’s the only wording that statisticians accept. Be careful not to say you “prove” or “accept” the null hypothesis.

Null hypotheses often include phrases such as “no effect”, “no difference”, or “no relationship”. When written in mathematical terms, they always include an equality (usually =, but sometimes ≥ or ≤).

Examples of null hypotheses

The table below gives examples of research questions and null hypotheses. There’s always more than one way to answer a research question, but these null hypotheses can help you get started.

*Note that some researchers prefer to always write the null hypothesis in terms of “no effect” and “=”. It would be fine to say that daily meditation has no effect on the incidence of depression and p 1 = p 2 .

The alternative hypothesis (H A ) is the other answer to your research question . It claims that there’s an effect in the population.

Often, your alternative hypothesis is the same as your research hypothesis. In other words, it’s the claim that you expect or hope will be true.

The alternative hypothesis is the complement to the null hypothesis. Null and alternative hypotheses are exhaustive, meaning that together they cover every possible outcome. They are also mutually exclusive, meaning that only one can be true at a time.

Alternative hypotheses often include phrases such as “an effect”, “a difference”, or “a relationship”. When alternative hypotheses are written in mathematical terms, they always include an inequality (usually ≠, but sometimes > or <). As with null hypotheses, there are many acceptable ways to phrase an alternative hypothesis.

Examples of alternative hypotheses

The table below gives examples of research questions and alternative hypotheses to help you get started with formulating your own.

Null and alternative hypotheses are similar in some ways:

• They’re both answers to the research question
• They both make claims about the population
• They’re both evaluated by statistical tests.

However, there are important differences between the two types of hypotheses, summarized in the following table.

To help you write your hypotheses, you can use the template sentences below. If you know which statistical test you’re going to use, you can use the test-specific template sentences. Otherwise, you can use the general template sentences.

The only thing you need to know to use these general template sentences are your dependent and independent variables. To write your research question, null hypothesis, and alternative hypothesis, fill in the following sentences with your variables:

Does independent variable affect dependent variable ?

• Null hypothesis (H 0 ): Independent variable does not affect dependent variable .
• Alternative hypothesis (H A ): Independent variable affects dependent variable .

Test-specific

Once you know the statistical test you’ll be using, you can write your hypotheses in a more precise and mathematical way specific to the test you chose. The table below provides template sentences for common statistical tests.

Note: The template sentences above assume that you’re performing one-tailed tests . One-tailed tests are appropriate for most studies.

The null hypothesis is often abbreviated as H 0 . When the null hypothesis is written using mathematical symbols, it always includes an equality symbol (usually =, but sometimes ≥ or ≤).

The alternative hypothesis is often abbreviated as H a or H 1 . When the alternative hypothesis is written using mathematical symbols, it always includes an inequality symbol (usually ≠, but sometimes < or >).

A research hypothesis is your proposed answer to your research question. The research hypothesis usually includes an explanation (‘ x affects y because …’).

A statistical hypothesis, on the other hand, is a mathematical statement about a population parameter. Statistical hypotheses always come in pairs: the null and alternative hypotheses. In a well-designed study , the statistical hypotheses correspond logically to the research hypothesis.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

Turney, S. (2022, December 06). Null and Alternative Hypotheses | Definitions & Examples. Scribbr. Retrieved 29 August 2024, from https://www.scribbr.co.uk/stats/null-and-alternative-hypothesis/

Is this article helpful?

Shaun Turney

Other students also liked, levels of measurement: nominal, ordinal, interval, ratio, the standard normal distribution | calculator, examples & uses, types of variables in research | definitions & examples.

9.1 Null and Alternative Hypotheses

The actual test begins by considering two hypotheses . They are called the null hypothesis and the alternative hypothesis . These hypotheses contain opposing viewpoints.

H 0 , the — null hypothesis: a statement of no difference between sample means or proportions or no difference between a sample mean or proportion and a population mean or proportion. In other words, the difference equals 0.

H a —, the alternative hypothesis: a claim about the population that is contradictory to H 0 and what we conclude when we reject H 0 .

Since the null and alternative hypotheses are contradictory, you must examine evidence to decide if you have enough evidence to reject the null hypothesis or not. The evidence is in the form of sample data.

After you have determined which hypothesis the sample supports, you make a decision. There are two options for a decision. They are reject H 0 if the sample information favors the alternative hypothesis or do not reject H 0 or decline to reject H 0 if the sample information is insufficient to reject the null hypothesis.

Mathematical Symbols Used in H 0 and H a :

H 0 always has a symbol with an equal in it. H a never has a symbol with an equal in it. The choice of symbol depends on the wording of the hypothesis test. However, be aware that many researchers use = in the null hypothesis, even with > or < as the symbol in the alternative hypothesis. This practice is acceptable because we only make the decision to reject or not reject the null hypothesis.

Example 9.1

H 0 : No more than 30 percent of the registered voters in Santa Clara County voted in the primary election. p ≤ 30 H a : More than 30 percent of the registered voters in Santa Clara County voted in the primary election. p > 30

A medical trial is conducted to test whether or not a new medicine reduces cholesterol by 25 percent. State the null and alternative hypotheses.

Example 9.2

We want to test whether the mean GPA of students in American colleges is different from 2.0 (out of 4.0). The null and alternative hypotheses are the following: H 0 : μ = 2.0 H a : μ ≠ 2.0

We want to test whether the mean height of eighth graders is 66 inches. State the null and alternative hypotheses. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.

• H 0 : μ __ 66
• H a : μ __ 66

Example 9.3

We want to test if college students take fewer than five years to graduate from college, on the average. The null and alternative hypotheses are the following: H 0 : μ ≥ 5 H a : μ < 5

We want to test if it takes fewer than 45 minutes to teach a lesson plan. State the null and alternative hypotheses. Fill in the correct symbol ( =, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.

• H 0 : μ __ 45
• H a : μ __ 45

Example 9.4

An article on school standards stated that about half of all students in France, Germany, and Israel take advanced placement exams and a third of the students pass. The same article stated that 6.6 percent of U.S. students take advanced placement exams and 4.4 percent pass. Test if the percentage of U.S. students who take advanced placement exams is more than 6.6 percent. State the null and alternative hypotheses. H 0 : p ≤ 0.066 H a : p > 0.066

On a state driver’s test, about 40 percent pass the test on the first try. We want to test if more than 40 percent pass on the first try. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.

• H 0 : p __ 0.40
• H a : p __ 0.40

Collaborative Exercise

Bring to class a newspaper, some news magazines, and some internet articles. In groups, find articles from which your group can write null and alternative hypotheses. Discuss your hypotheses with the rest of the class.

This book may not be used in the training of large language models or otherwise be ingested into large language models or generative AI offerings without OpenStax's permission.

Want to cite, share, or modify this book? This book uses the Creative Commons Attribution License and you must attribute Texas Education Agency (TEA). The original material is available at: https://www.texasgateway.org/book/tea-statistics . Changes were made to the original material, including updates to art, structure, and other content updates.

Access for free at https://openstax.org/books/statistics/pages/1-introduction

• Authors: Barbara Illowsky, Susan Dean
• Publisher/website: OpenStax
• Book title: Statistics
• Publication date: Mar 27, 2020
• Location: Houston, Texas
• Book URL: https://openstax.org/books/statistics/pages/1-introduction
• Section URL: https://openstax.org/books/statistics/pages/9-1-null-and-alternative-hypotheses

© Apr 16, 2024 Texas Education Agency (TEA). The OpenStax name, OpenStax logo, OpenStax book covers, OpenStax CNX name, and OpenStax CNX logo are not subject to the Creative Commons license and may not be reproduced without the prior and express written consent of Rice University.

Alternative hypothesis

by Marco Taboga , PhD

In a statistical test, observed data is used to decide whether or not to reject a restriction on the data-generating probability distribution.

The assumption that the restriction is true is called null hypothesis , while the statement that the restriction is not true is called alternative hypothesis.

A correct specification of the alternative hypothesis is essential to decide between one-tailed and two-tailed tests.

Table of contents

Mathematical setting

Choice between one-tailed and two-tailed tests, the critical region, the interpretation of the rejection, the interpretation must be coherent with the alternative hypothesis.

• Power function

Accepting the alternative

More details, keep reading the glossary.

In order to fully understand the concept of alternative hypothesis, we need to remember the essential elements of a statistical inference problem:

we observe a sample drawn from an unknown probability distribution;

in principle, any valid probability distribution could have generated the sample;

however, we usually place some a priori restrictions on the set of possible data-generating distributions;

A couple of simple examples follow.

When we conduct a statistical test, we formulate a null hypothesis as a restriction on the statistical model.

The alternative hypothesis is

The alternative hypothesis is used to decide whether a test should be one-tailed or two-tailed.

The null hypothesis is rejected if the test statistic falls within a critical region that has been chosen by the statistician.

The critical region is a set of values that may comprise:

only the left tail of the distribution or only the right tail (one-tailed test);

both the left and the right tail (two-tailed test).

The choice of the critical region depends on the alternative hypothesis. Let us see why.

The interpretation is different depending on the tail of the distribution in which the test statistic falls.

The choice between a one-tailed or a two-tailed test needs to be done in such a way that the interpretation of a rejection is always coherent with the alternative hypothesis.

When we deal with the power function of a test, the term "alternative hypothesis" has a special meaning.

We conclude with a caveat about the interpretation of the outcome of a test of hypothesis.

The interpretation of a rejection of the null is controversial.

According to some statisticians, rejecting the null is equivalent to accepting the alternative.

However, others deem that rejecting the null does not necessarily imply accepting the alternative. In fact, it is possible to think of situations in which both hypotheses can be rejected. Let us see why.

According to the conceptual framework illustrated by the images above, there are three possibilities:

the null is true;

the alternative is true;

neither the null nor the alternative is true because the true data-generating distribution has been excluded from the statistical model (we say that the model is mis-specified).

If we are in case 3, accepting the alternative after a rejection of the null is an incorrect decision. Moreover, a second test in which the alternative becomes the new null may lead us to another rejection.

You can find more details about the alternative hypothesis in the lecture on Hypothesis testing .

Previous entry: Almost sure

Next entry: Binomial coefficient

How to cite

Please cite as:

Taboga, Marco (2021). "Alternative hypothesis", Lectures on probability theory and mathematical statistics. Kindle Direct Publishing. Online appendix. https://www.statlect.com/glossary/alternative-hypothesis.

Most of the learning materials found on this website are now available in a traditional textbook format.

• Maximum likelihood
• Binomial distribution
• Beta distribution
• Convergence in probability
• Delta method
• Exponential distribution
• Chi-square distribution
• Set estimation
• Wishart distribution
• Mathematical tools
• Fundamentals of probability
• Probability distributions
• Asymptotic theory
• Fundamentals of statistics
• About Statlect
• Cookies, privacy and terms of use
• Precision matrix
• Loss function
• Integrable variable
• Critical value
• To enhance your privacy,
• we removed the social buttons,
• but don't forget to share .

Module 9: Hypothesis Testing With One Sample

Null and alternative hypotheses, learning outcomes.

• Describe hypothesis testing in general and in practice

The actual test begins by considering two  hypotheses . They are called the null hypothesis and the alternative hypothesis . These hypotheses contain opposing viewpoints.

H 0 : The null hypothesis: It is a statement about the population that either is believed to be true or is used to put forth an argument unless it can be shown to be incorrect beyond a reasonable doubt.

H a : The alternative hypothesis : It is a claim about the population that is contradictory to H 0 and what we conclude when we reject H 0 .

Since the null and alternative hypotheses are contradictory, you must examine evidence to decide if you have enough evidence to reject the null hypothesis or not. The evidence is in the form of sample data.

After you have determined which hypothesis the sample supports, you make adecision. There are two options for a  decision . They are “reject H 0 ” if the sample information favors the alternative hypothesis or “do not reject H 0 ” or “decline to reject H 0 ” if the sample information is insufficient to reject the null hypothesis.

Mathematical Symbols Used in  H 0 and H a :

H 0 always has a symbol with an equal in it. H a never has a symbol with an equal in it. The choice of symbol depends on the wording of the hypothesis test. However, be aware that many researchers (including one of the co-authors in research work) use = in the null hypothesis, even with > or < as the symbol in the alternative hypothesis. This practice is acceptable because we only make the decision to reject or not reject the null hypothesis.

H 0 : No more than 30% of the registered voters in Santa Clara County voted in the primary election. p ≤ 30

H a : More than 30% of the registered voters in Santa Clara County voted in the primary election. p > 30

A medical trial is conducted to test whether or not a new medicine reduces cholesterol by 25%. State the null and alternative hypotheses.

H 0 : The drug reduces cholesterol by 25%. p = 0.25

H a : The drug does not reduce cholesterol by 25%. p ≠ 0.25

We want to test whether the mean GPA of students in American colleges is different from 2.0 (out of 4.0). The null and alternative hypotheses are:

H 0 : μ = 2.0

H a : μ ≠ 2.0

We want to test whether the mean height of eighth graders is 66 inches. State the null and alternative hypotheses. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses. H 0 : μ __ 66 H a : μ __ 66

• H 0 : μ = 66
• H a : μ ≠ 66

We want to test if college students take less than five years to graduate from college, on the average. The null and alternative hypotheses are:

H 0 : μ ≥ 5

H a : μ < 5

We want to test if it takes fewer than 45 minutes to teach a lesson plan. State the null and alternative hypotheses. Fill in the correct symbol ( =, ≠, ≥, <, ≤, >) for the null and alternative hypotheses. H 0 : μ __ 45 H a : μ __ 45

• H 0 : μ ≥ 45
• H a : μ < 45

In an issue of U.S. News and World Report , an article on school standards stated that about half of all students in France, Germany, and Israel take advanced placement exams and a third pass. The same article stated that 6.6% of U.S. students take advanced placement exams and 4.4% pass. Test if the percentage of U.S. students who take advanced placement exams is more than 6.6%. State the null and alternative hypotheses.

H 0 : p ≤ 0.066

H a : p > 0.066

On a state driver’s test, about 40% pass the test on the first try. We want to test if more than 40% pass on the first try. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses. H 0 : p __ 0.40 H a : p __ 0.40

• H 0 : p = 0.40
• H a : p > 0.40

Concept Review

In a  hypothesis test , sample data is evaluated in order to arrive at a decision about some type of claim. If certain conditions about the sample are satisfied, then the claim can be evaluated for a population. In a hypothesis test, we: Evaluate the null hypothesis , typically denoted with H 0 . The null is not rejected unless the hypothesis test shows otherwise. The null statement must always contain some form of equality (=, ≤ or ≥) Always write the alternative hypothesis , typically denoted with H a or H 1 , using less than, greater than, or not equals symbols, i.e., (≠, >, or <). If we reject the null hypothesis, then we can assume there is enough evidence to support the alternative hypothesis. Never state that a claim is proven true or false. Keep in mind the underlying fact that hypothesis testing is based on probability laws; therefore, we can talk only in terms of non-absolute certainties.

Formula Review

H 0 and H a are contradictory.

• OpenStax, Statistics, Null and Alternative Hypotheses. Provided by : OpenStax. Located at : http://cnx.org/contents/[email protected]:58/Introductory_Statistics . License : CC BY: Attribution
• Introductory Statistics . Authored by : Barbara Illowski, Susan Dean. Provided by : Open Stax. Located at : http://cnx.org/contents/[email protected] . License : CC BY: Attribution . License Terms : Download for free at http://cnx.org/contents/[email protected]
• Simple hypothesis testing | Probability and Statistics | Khan Academy. Authored by : Khan Academy. Located at : https://youtu.be/5D1gV37bKXY . License : All Rights Reserved . License Terms : Standard YouTube License

Chapter 8: Hypothesis Testing with One Sample

8.1 Null and Alternative Hypotheses

Learning objectives.

By the end of this section, the student should be able to:

• Describe hypothesis testing in general and in practice.

Hypothesis Testing

The actual test begins by considering two hypotheses . They are called the null hypothesis and the alternative hypothesis . These hypotheses contain opposing viewpoints.

H 0 : The null hypothesis: It is a statement about the population that either is believed to be true or is used to put forth an argument unless it can be shown to be incorrect beyond a reasonable doubt.

H a : The alternative hypothesis: It is a claim about the population that is contradictory to H 0 and what we conclude when we reject H 0 .

Since the null and alternative hypotheses are contradictory, you must examine evidence to decide if you have enough evidence to reject the null hypothesis or not. The evidence is in the form of sample data.

After you have determined which hypothesis the sample supports, you make a decision. There are two options for a decision. They are “reject H 0 ” if the sample information favors the alternative hypothesis or “do not reject H 0 ” or “decline to reject H 0 ” if the sample information is insufficient to reject the null hypothesis.

Mathematical Symbols Used in H 0 and H a :

H 0 always has a symbol with an equal in it. H a never has a symbol with an equal in it. The choice of symbol depends on the wording of the hypothesis test. However, be aware that many researchers (including one of the co-authors in research work) use = in the null hypothesis, even with > or < as the symbol in the alternative hypothesis. This practice is acceptable because we only make the decision to reject or not reject the null hypothesis.

H 0 : No more than 30% of the registered voters in Santa Clara County voted in the primary election. p ≤ 30

H a : More than 30% of the registered voters in Santa Clara County voted in the primary election. p > 30

A medical trial is conducted to test whether or not a new medicine reduces cholesterol by 25%. State the null and alternative hypotheses.

H 0 : The drug reduces cholesterol by 25%. p = 0.25

H a : The drug does not reduce cholesterol by 25%. p ≠ 0.25

We want to test whether the mean GPA of students in American colleges is different from 2.0 (out of 4.0). The null and alternative hypotheses are:

H 0 : μ = 2.0

H a : μ ≠ 2.0

We want to test whether the mean height of eighth graders is 66 inches. State the null and alternative hypotheses. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.

• H 0  : μ = 66
• H a  : μ ≠ 66

We want to test if college students take less than five years to graduate from college, on the average. The null and alternative hypotheses are:

H 0 : μ ≥ 5

H a : μ < 5

We want to test if it takes fewer than 45 minutes to teach a lesson plan. State the null and alternative hypotheses. Fill in the correct symbol ( =, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.

• Ha: μ < 45

In an issue of U.S. News and World Report , an article on school standards stated that about half of all students in France, Germany, and Israel take advanced placement exams and a third pass. The same article stated that 6.6% of U.S. students take advanced placement exams and 4.4% pass. Test if the percentage of U.S. students who take advanced placement exams is more than 6.6%. State the null and alternative hypotheses.

H0: p ≤ 0.066

Ha: p > 0.066

On a state driver’s test, about 40% pass the test on the first try. We want to test if more than 40% pass on the first try. Fill in the correct symbol (=, ≠, ≥, <, ≤, >) for the null and alternative hypotheses.

• H 0 : p = 0.40
• H a : p > 0.40

Data from the National Institute of Mental Health. Available online at http://www.nimh.nih.gov/publicat/depression.cfm.

a statement about the value of a population parameter, in case of two hypotheses, the statement assumed to be true is called the null hypothesis (notation H0) and the contradictory statement is called the alternative hypothesis (notation Ha).

Introductory Statistics Copyright © 2024 by LOUIS: The Louisiana Library Network is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License , except where otherwise noted.

Share This Book

• Math Article

Alternative Hypothesis

Alternative hypothesis defines there is a statistically important relationship between two variables. Whereas null hypothesis states there is no statistical relationship between the two variables. In statistics, we usually come across various kinds of hypotheses. A statistical hypothesis is supposed to be a working statement which is assumed to be logical with given data. It should be noticed that a hypothesis is neither considered true nor false.

The alternative hypothesis is a statement used in statistical inference experiment. It is contradictory to the null hypothesis and denoted by H a or H 1 . We can also say that it is simply an alternative to the null. In hypothesis testing, an alternative theory is a statement which a researcher is testing. This statement is true from the researcher’s point of view and ultimately proves to reject the null to replace it with an alternative assumption. In this hypothesis, the difference between two or more variables is predicted by the researchers, such that the pattern of data observed in the test is not due to chance.

To check the water quality of a river for one year, the researchers are doing the observation. As per the null hypothesis, there is no change in water quality in the first half of the year as compared to the second half. But in the alternative hypothesis, the quality of water is poor in the second half when observed.

Difference Between Null and Alternative Hypothesis

Basically, there are three types of the alternative hypothesis, they are;

Left-Tailed : Here, it is expected that the sample proportion (π) is less than a specified value which is denoted by π 0 , such that;

H 1 : π < π 0

Right-Tailed: It represents that the sample proportion (π) is greater than some value, denoted by π 0 .

H 1 : π > π 0

Two-Tailed: According to this hypothesis, the sample proportion (denoted by π) is not equal to a specific value which is represented by π 0 .

H 1 : π ≠ π 0

Note: The null hypothesis for all the three alternative hypotheses, would be H 1 : π = π 0 .

Register with BYJU'S & Download Free PDFs

Register with byju's & watch live videos.

Frequently asked questions

What are null and alternative hypotheses.

Null and alternative hypotheses are used in statistical hypothesis testing . The null hypothesis of a test always predicts no effect or no relationship between variables, while the alternative hypothesis states your research prediction of an effect or relationship.

Frequently asked questions: Statistics

As the degrees of freedom increase, Student’s t distribution becomes less leptokurtic , meaning that the probability of extreme values decreases. The distribution becomes more and more similar to a standard normal distribution .

The three categories of kurtosis are:

• Mesokurtosis : An excess kurtosis of 0. Normal distributions are mesokurtic.
• Platykurtosis : A negative excess kurtosis. Platykurtic distributions are thin-tailed, meaning that they have few outliers .
• Leptokurtosis : A positive excess kurtosis. Leptokurtic distributions are fat-tailed, meaning that they have many outliers.

Probability distributions belong to two broad categories: discrete probability distributions and continuous probability distributions . Within each category, there are many types of probability distributions.

Probability is the relative frequency over an infinite number of trials.

For example, the probability of a coin landing on heads is .5, meaning that if you flip the coin an infinite number of times, it will land on heads half the time.

Since doing something an infinite number of times is impossible, relative frequency is often used as an estimate of probability. If you flip a coin 1000 times and get 507 heads, the relative frequency, .507, is a good estimate of the probability.

Categorical variables can be described by a frequency distribution. Quantitative variables can also be described by a frequency distribution, but first they need to be grouped into interval classes .

A histogram is an effective way to tell if a frequency distribution appears to have a normal distribution .

Plot a histogram and look at the shape of the bars. If the bars roughly follow a symmetrical bell or hill shape, like the example below, then the distribution is approximately normally distributed.

You can use the CHISQ.INV.RT() function to find a chi-square critical value in Excel.

For example, to calculate the chi-square critical value for a test with df = 22 and α = .05, click any blank cell and type:

=CHISQ.INV.RT(0.05,22)

You can use the qchisq() function to find a chi-square critical value in R.

For example, to calculate the chi-square critical value for a test with df = 22 and α = .05:

qchisq(p = .05, df = 22, lower.tail = FALSE)

You can use the chisq.test() function to perform a chi-square test of independence in R. Give the contingency table as a matrix for the “x” argument. For example:

m = matrix(data = c(89, 84, 86, 9, 8, 24), nrow = 3, ncol = 2)

chisq.test(x = m)

You can use the CHISQ.TEST() function to perform a chi-square test of independence in Excel. It takes two arguments, CHISQ.TEST(observed_range, expected_range), and returns the p value.

Chi-square goodness of fit tests are often used in genetics. One common application is to check if two genes are linked (i.e., if the assortment is independent). When genes are linked, the allele inherited for one gene affects the allele inherited for another gene.

Suppose that you want to know if the genes for pea texture (R = round, r = wrinkled) and color (Y = yellow, y = green) are linked. You perform a dihybrid cross between two heterozygous ( RY / ry ) pea plants. The hypotheses you’re testing with your experiment are:

• This would suggest that the genes are unlinked.
• This would suggest that the genes are linked.

You observe 100 peas:

• 78 round and yellow peas
• 6 round and green peas
• 4 wrinkled and yellow peas
• 12 wrinkled and green peas

Step 1: Calculate the expected frequencies

To calculate the expected values, you can make a Punnett square. If the two genes are unlinked, the probability of each genotypic combination is equal.

The expected phenotypic ratios are therefore 9 round and yellow: 3 round and green: 3 wrinkled and yellow: 1 wrinkled and green.

From this, you can calculate the expected phenotypic frequencies for 100 peas:

Step 2: Calculate chi-square

Χ 2 = 8.41 + 8.67 + 11.6 + 5.4 = 34.08

Step 3: Find the critical chi-square value

Since there are four groups (round and yellow, round and green, wrinkled and yellow, wrinkled and green), there are three degrees of freedom .

For a test of significance at α = .05 and df = 3, the Χ 2 critical value is 7.82.

Step 4: Compare the chi-square value to the critical value

Χ 2 = 34.08

Critical value = 7.82

The Χ 2 value is greater than the critical value .

Step 5: Decide whether the reject the null hypothesis

The Χ 2 value is greater than the critical value, so we reject the null hypothesis that the population of offspring have an equal probability of inheriting all possible genotypic combinations. There is a significant difference between the observed and expected genotypic frequencies ( p < .05).

The data supports the alternative hypothesis that the offspring do not have an equal probability of inheriting all possible genotypic combinations, which suggests that the genes are linked

You can use the chisq.test() function to perform a chi-square goodness of fit test in R. Give the observed values in the “x” argument, give the expected values in the “p” argument, and set “rescale.p” to true. For example:

chisq.test(x = c(22,30,23), p = c(25,25,25), rescale.p = TRUE)

You can use the CHISQ.TEST() function to perform a chi-square goodness of fit test in Excel. It takes two arguments, CHISQ.TEST(observed_range, expected_range), and returns the p value .

Both correlations and chi-square tests can test for relationships between two variables. However, a correlation is used when you have two quantitative variables and a chi-square test of independence is used when you have two categorical variables.

Both chi-square tests and t tests can test for differences between two groups. However, a t test is used when you have a dependent quantitative variable and an independent categorical variable (with two groups). A chi-square test of independence is used when you have two categorical variables.

The two main chi-square tests are the chi-square goodness of fit test and the chi-square test of independence .

A chi-square distribution is a continuous probability distribution . The shape of a chi-square distribution depends on its degrees of freedom , k . The mean of a chi-square distribution is equal to its degrees of freedom ( k ) and the variance is 2 k . The range is 0 to ∞.

As the degrees of freedom ( k ) increases, the chi-square distribution goes from a downward curve to a hump shape. As the degrees of freedom increases further, the hump goes from being strongly right-skewed to being approximately normal.

To find the quartiles of a probability distribution, you can use the distribution’s quantile function.

You can use the quantile() function to find quartiles in R. If your data is called “data”, then “quantile(data, prob=c(.25,.5,.75), type=1)” will return the three quartiles.

You can use the QUARTILE() function to find quartiles in Excel. If your data is in column A, then click any blank cell and type “=QUARTILE(A:A,1)” for the first quartile, “=QUARTILE(A:A,2)” for the second quartile, and “=QUARTILE(A:A,3)” for the third quartile.

You can use the PEARSON() function to calculate the Pearson correlation coefficient in Excel. If your variables are in columns A and B, then click any blank cell and type “PEARSON(A:A,B:B)”.

There is no function to directly test the significance of the correlation.

You can use the cor() function to calculate the Pearson correlation coefficient in R. To test the significance of the correlation, you can use the cor.test() function.

You should use the Pearson correlation coefficient when (1) the relationship is linear and (2) both variables are quantitative and (3) normally distributed and (4) have no outliers.

The Pearson correlation coefficient ( r ) is the most common way of measuring a linear correlation. It is a number between –1 and 1 that measures the strength and direction of the relationship between two variables.

This table summarizes the most important differences between normal distributions and Poisson distributions :

When the mean of a Poisson distribution is large (>10), it can be approximated by a normal distribution.

In the Poisson distribution formula, lambda (λ) is the mean number of events within a given interval of time or space. For example, λ = 0.748 floods per year.

The e in the Poisson distribution formula stands for the number 2.718. This number is called Euler’s constant. You can simply substitute e with 2.718 when you’re calculating a Poisson probability. Euler’s constant is a very useful number and is especially important in calculus.

The three types of skewness are:

• Right skew (also called positive skew ) . A right-skewed distribution is longer on the right side of its peak than on its left.
• Left skew (also called negative skew). A left-skewed distribution is longer on the left side of its peak than on its right.
• Zero skew. It is symmetrical and its left and right sides are mirror images.

Skewness and kurtosis are both important measures of a distribution’s shape.

• Skewness measures the asymmetry of a distribution.
• Kurtosis measures the heaviness of a distribution’s tails relative to a normal distribution .

A research hypothesis is your proposed answer to your research question. The research hypothesis usually includes an explanation (“ x affects y because …”).

A statistical hypothesis, on the other hand, is a mathematical statement about a population parameter. Statistical hypotheses always come in pairs: the null and alternative hypotheses . In a well-designed study , the statistical hypotheses correspond logically to the research hypothesis.

The alternative hypothesis is often abbreviated as H a or H 1 . When the alternative hypothesis is written using mathematical symbols, it always includes an inequality symbol (usually ≠, but sometimes < or >).

The null hypothesis is often abbreviated as H 0 . When the null hypothesis is written using mathematical symbols, it always includes an equality symbol (usually =, but sometimes ≥ or ≤).

The t distribution was first described by statistician William Sealy Gosset under the pseudonym “Student.”

To calculate a confidence interval of a mean using the critical value of t , follow these four steps:

• Choose the significance level based on your desired confidence level. The most common confidence level is 95%, which corresponds to α = .05 in the two-tailed t table .
• Find the critical value of t in the two-tailed t table.
• Multiply the critical value of t by s / √ n .
• Add this value to the mean to calculate the upper limit of the confidence interval, and subtract this value from the mean to calculate the lower limit.

To test a hypothesis using the critical value of t , follow these four steps:

• Calculate the t value for your sample.
• Find the critical value of t in the t table .
• Determine if the (absolute) t value is greater than the critical value of t .
• Reject the null hypothesis if the sample’s t value is greater than the critical value of t . Otherwise, don’t reject the null hypothesis .

You can use the T.INV() function to find the critical value of t for one-tailed tests in Excel, and you can use the T.INV.2T() function for two-tailed tests.

You can use the qt() function to find the critical value of t in R. The function gives the critical value of t for the one-tailed test. If you want the critical value of t for a two-tailed test, divide the significance level by two.

You can use the RSQ() function to calculate R² in Excel. If your dependent variable is in column A and your independent variable is in column B, then click any blank cell and type “RSQ(A:A,B:B)”.

You can use the summary() function to view the R²  of a linear model in R. You will see the “R-squared” near the bottom of the output.

There are two formulas you can use to calculate the coefficient of determination (R²) of a simple linear regression .

The coefficient of determination (R²) is a number between 0 and 1 that measures how well a statistical model predicts an outcome. You can interpret the R² as the proportion of variation in the dependent variable that is predicted by the statistical model.

There are three main types of missing data .

Missing completely at random (MCAR) data are randomly distributed across the variable and unrelated to other variables .

Missing at random (MAR) data are not randomly distributed but they are accounted for by other observed variables.

Missing not at random (MNAR) data systematically differ from the observed values.

To tidy up your missing data , your options usually include accepting, removing, or recreating the missing data.

• Acceptance: You leave your data as is
• Listwise or pairwise deletion: You delete all cases (participants) with missing data from analyses
• Imputation: You use other data to fill in the missing data

Missing data are important because, depending on the type, they can sometimes bias your results. This means your results may not be generalizable outside of your study because your data come from an unrepresentative sample .

Missing data , or missing values, occur when you don’t have data stored for certain variables or participants.

In any dataset, there’s usually some missing data. In quantitative research , missing values appear as blank cells in your spreadsheet.

There are two steps to calculating the geometric mean :

• Multiply all values together to get their product.
• Find the n th root of the product ( n is the number of values).

Before calculating the geometric mean, note that:

• The geometric mean can only be found for positive values.
• If any value in the data set is zero, the geometric mean is zero.

The arithmetic mean is the most commonly used type of mean and is often referred to simply as “the mean.” While the arithmetic mean is based on adding and dividing values, the geometric mean multiplies and finds the root of values.

Even though the geometric mean is a less common measure of central tendency , it’s more accurate than the arithmetic mean for percentage change and positively skewed data. The geometric mean is often reported for financial indices and population growth rates.

The geometric mean is an average that multiplies all values and finds a root of the number. For a dataset with n numbers, you find the n th root of their product.

Outliers are extreme values that differ from most values in the dataset. You find outliers at the extreme ends of your dataset.

It’s best to remove outliers only when you have a sound reason for doing so.

Some outliers represent natural variations in the population , and they should be left as is in your dataset. These are called true outliers.

Other outliers are problematic and should be removed because they represent measurement errors , data entry or processing errors, or poor sampling.

You can choose from four main ways to detect outliers :

• Sorting your values from low to high and checking minimum and maximum values
• Visualizing your data with a box plot and looking for outliers
• Using the interquartile range to create fences for your data
• Using statistical procedures to identify extreme values

Outliers can have a big impact on your statistical analyses and skew the results of any hypothesis test if they are inaccurate.

These extreme values can impact your statistical power as well, making it hard to detect a true effect if there is one.

No, the steepness or slope of the line isn’t related to the correlation coefficient value. The correlation coefficient only tells you how closely your data fit on a line, so two datasets with the same correlation coefficient can have very different slopes.

To find the slope of the line, you’ll need to perform a regression analysis .

Correlation coefficients always range between -1 and 1.

The sign of the coefficient tells you the direction of the relationship: a positive value means the variables change together in the same direction, while a negative value means they change together in opposite directions.

The absolute value of a number is equal to the number without its sign. The absolute value of a correlation coefficient tells you the magnitude of the correlation: the greater the absolute value, the stronger the correlation.

These are the assumptions your data must meet if you want to use Pearson’s r :

• Both variables are on an interval or ratio level of measurement
• Data from both variables follow normal distributions
• Your data have no outliers
• Your data is from a random or representative sample
• You expect a linear relationship between the two variables

A correlation coefficient is a single number that describes the strength and direction of the relationship between your variables.

Different types of correlation coefficients might be appropriate for your data based on their levels of measurement and distributions . The Pearson product-moment correlation coefficient (Pearson’s r ) is commonly used to assess a linear relationship between two quantitative variables.

There are various ways to improve power:

• Increase the potential effect size by manipulating your independent variable more strongly,
• Increase sample size,
• Increase the significance level (alpha),
• Reduce measurement error by increasing the precision and accuracy of your measurement devices and procedures,
• Use a one-tailed test instead of a two-tailed test for t tests and z tests.

A power analysis is a calculation that helps you determine a minimum sample size for your study. It’s made up of four main components. If you know or have estimates for any three of these, you can calculate the fourth component.

• Statistical power : the likelihood that a test will detect an effect of a certain size if there is one, usually set at 80% or higher.
• Sample size : the minimum number of observations needed to observe an effect of a certain size with a given power level.
• Significance level (alpha) : the maximum risk of rejecting a true null hypothesis that you are willing to take, usually set at 5%.
• Expected effect size : a standardized way of expressing the magnitude of the expected result of your study, usually based on similar studies or a pilot study.

Statistical analysis is the main method for analyzing quantitative research data . It uses probabilities and models to test predictions about a population from sample data.

The risk of making a Type II error is inversely related to the statistical power of a test. Power is the extent to which a test can correctly detect a real effect when there is one.

To (indirectly) reduce the risk of a Type II error, you can increase the sample size or the significance level to increase statistical power.

The risk of making a Type I error is the significance level (or alpha) that you choose. That’s a value that you set at the beginning of your study to assess the statistical probability of obtaining your results ( p value ).

The significance level is usually set at 0.05 or 5%. This means that your results only have a 5% chance of occurring, or less, if the null hypothesis is actually true.

To reduce the Type I error probability, you can set a lower significance level.

In statistics, a Type I error means rejecting the null hypothesis when it’s actually true, while a Type II error means failing to reject the null hypothesis when it’s actually false.

In statistics, power refers to the likelihood of a hypothesis test detecting a true effect if there is one. A statistically powerful test is more likely to reject a false negative (a Type II error).

If you don’t ensure enough power in your study, you may not be able to detect a statistically significant result even when it has practical significance. Your study might not have the ability to answer your research question.

While statistical significance shows that an effect exists in a study, practical significance shows that the effect is large enough to be meaningful in the real world.

Statistical significance is denoted by p -values whereas practical significance is represented by effect sizes .

There are dozens of measures of effect sizes . The most common effect sizes are Cohen’s d and Pearson’s r . Cohen’s d measures the size of the difference between two groups while Pearson’s r measures the strength of the relationship between two variables .

Effect size tells you how meaningful the relationship between variables or the difference between groups is.

A large effect size means that a research finding has practical significance, while a small effect size indicates limited practical applications.

Using descriptive and inferential statistics , you can make two types of estimates about the population : point estimates and interval estimates.

• A point estimate is a single value estimate of a parameter . For instance, a sample mean is a point estimate of a population mean.
• An interval estimate gives you a range of values where the parameter is expected to lie. A confidence interval is the most common type of interval estimate.

Both types of estimates are important for gathering a clear idea of where a parameter is likely to lie.

Standard error and standard deviation are both measures of variability . The standard deviation reflects variability within a sample, while the standard error estimates the variability across samples of a population.

The standard error of the mean , or simply standard error , indicates how different the population mean is likely to be from a sample mean. It tells you how much the sample mean would vary if you were to repeat a study using new samples from within a single population.

To figure out whether a given number is a parameter or a statistic , ask yourself the following:

• Does the number describe a whole, complete population where every member can be reached for data collection ?
• Is it possible to collect data for this number from every member of the population in a reasonable time frame?

If the answer is yes to both questions, the number is likely to be a parameter. For small populations, data can be collected from the whole population and summarized in parameters.

If the answer is no to either of the questions, then the number is more likely to be a statistic.

The arithmetic mean is the most commonly used mean. It’s often simply called the mean or the average. But there are some other types of means you can calculate depending on your research purposes:

• Weighted mean: some values contribute more to the mean than others.
• Geometric mean : values are multiplied rather than summed up.
• Harmonic mean: reciprocals of values are used instead of the values themselves.

You can find the mean , or average, of a data set in two simple steps:

• Find the sum of the values by adding them all up.
• Divide the sum by the number of values in the data set.

This method is the same whether you are dealing with sample or population data or positive or negative numbers.

The median is the most informative measure of central tendency for skewed distributions or distributions with outliers. For example, the median is often used as a measure of central tendency for income distributions, which are generally highly skewed.

Because the median only uses one or two values, it’s unaffected by extreme outliers or non-symmetric distributions of scores. In contrast, the mean and mode can vary in skewed distributions.

To find the median , first order your data. Then calculate the middle position based on n , the number of values in your data set.

A data set can often have no mode, one mode or more than one mode – it all depends on how many different values repeat most frequently.

Your data can be:

• without any mode
• unimodal, with one mode,
• bimodal, with two modes,
• trimodal, with three modes, or
• multimodal, with four or more modes.

To find the mode :

• If your data is numerical or quantitative, order the values from low to high.
• If it is categorical, sort the values by group, in any order.

Then you simply need to identify the most frequently occurring value.

The interquartile range is the best measure of variability for skewed distributions or data sets with outliers. Because it’s based on values that come from the middle half of the distribution, it’s unlikely to be influenced by outliers .

The two most common methods for calculating interquartile range are the exclusive and inclusive methods.

The exclusive method excludes the median when identifying Q1 and Q3, while the inclusive method includes the median as a value in the data set in identifying the quartiles.

For each of these methods, you’ll need different procedures for finding the median, Q1 and Q3 depending on whether your sample size is even- or odd-numbered. The exclusive method works best for even-numbered sample sizes, while the inclusive method is often used with odd-numbered sample sizes.

While the range gives you the spread of the whole data set, the interquartile range gives you the spread of the middle half of a data set.

Homoscedasticity, or homogeneity of variances, is an assumption of equal or similar variances in different groups being compared.

This is an important assumption of parametric statistical tests because they are sensitive to any dissimilarities. Uneven variances in samples result in biased and skewed test results.

Statistical tests such as variance tests or the analysis of variance (ANOVA) use sample variance to assess group differences of populations. They use the variances of the samples to assess whether the populations they come from significantly differ from each other.

Variance is the average squared deviations from the mean, while standard deviation is the square root of this number. Both measures reflect variability in a distribution, but their units differ:

• Standard deviation is expressed in the same units as the original values (e.g., minutes or meters).
• Variance is expressed in much larger units (e.g., meters squared).

Although the units of variance are harder to intuitively understand, variance is important in statistical tests .

The empirical rule, or the 68-95-99.7 rule, tells you where most of the values lie in a normal distribution :

• Around 68% of values are within 1 standard deviation of the mean.
• Around 95% of values are within 2 standard deviations of the mean.
• Around 99.7% of values are within 3 standard deviations of the mean.

The empirical rule is a quick way to get an overview of your data and check for any outliers or extreme values that don’t follow this pattern.

In a normal distribution , data are symmetrically distributed with no skew. Most values cluster around a central region, with values tapering off as they go further away from the center.

The measures of central tendency (mean, mode, and median) are exactly the same in a normal distribution.

The standard deviation is the average amount of variability in your data set. It tells you, on average, how far each score lies from the mean .

In normal distributions, a high standard deviation means that values are generally far from the mean, while a low standard deviation indicates that values are clustered close to the mean.

No. Because the range formula subtracts the lowest number from the highest number, the range is always zero or a positive number.

In statistics, the range is the spread of your data from the lowest to the highest value in the distribution. It is the simplest measure of variability .

While central tendency tells you where most of your data points lie, variability summarizes how far apart your points from each other.

Data sets can have the same central tendency but different levels of variability or vice versa . Together, they give you a complete picture of your data.

Variability is most commonly measured with the following descriptive statistics :

• Range : the difference between the highest and lowest values
• Interquartile range : the range of the middle half of a distribution
• Standard deviation : average distance from the mean
• Variance : average of squared distances from the mean

Variability tells you how far apart points lie from each other and from the center of a distribution or a data set.

Variability is also referred to as spread, scatter or dispersion.

While interval and ratio data can both be categorized, ranked, and have equal spacing between adjacent values, only ratio scales have a true zero.

For example, temperature in Celsius or Fahrenheit is at an interval scale because zero is not the lowest possible temperature. In the Kelvin scale, a ratio scale, zero represents a total lack of thermal energy.

A critical value is the value of the test statistic which defines the upper and lower bounds of a confidence interval , or which defines the threshold of statistical significance in a statistical test. It describes how far from the mean of the distribution you have to go to cover a certain amount of the total variation in the data (i.e. 90%, 95%, 99%).

If you are constructing a 95% confidence interval and are using a threshold of statistical significance of p = 0.05, then your critical value will be identical in both cases.

The t -distribution gives more probability to observations in the tails of the distribution than the standard normal distribution (a.k.a. the z -distribution).

In this way, the t -distribution is more conservative than the standard normal distribution: to reach the same level of confidence or statistical significance , you will need to include a wider range of the data.

A t -score (a.k.a. a t -value) is equivalent to the number of standard deviations away from the mean of the t -distribution .

The t -score is the test statistic used in t -tests and regression tests. It can also be used to describe how far from the mean an observation is when the data follow a t -distribution.

The t -distribution is a way of describing a set of observations where most observations fall close to the mean , and the rest of the observations make up the tails on either side. It is a type of normal distribution used for smaller sample sizes, where the variance in the data is unknown.

The t -distribution forms a bell curve when plotted on a graph. It can be described mathematically using the mean and the standard deviation .

In statistics, ordinal and nominal variables are both considered categorical variables .

Even though ordinal data can sometimes be numerical, not all mathematical operations can be performed on them.

Ordinal data has two characteristics:

• The data can be classified into different categories within a variable.
• The categories have a natural ranked order.

However, unlike with interval data, the distances between the categories are uneven or unknown.

Nominal and ordinal are two of the four levels of measurement . Nominal level data can only be classified, while ordinal level data can be classified and ordered.

Nominal data is data that can be labelled or classified into mutually exclusive categories within a variable. These categories cannot be ordered in a meaningful way.

For example, for the nominal variable of preferred mode of transportation, you may have the categories of car, bus, train, tram or bicycle.

If your confidence interval for a difference between groups includes zero, that means that if you run your experiment again you have a good chance of finding no difference between groups.

If your confidence interval for a correlation or regression includes zero, that means that if you run your experiment again there is a good chance of finding no correlation in your data.

In both of these cases, you will also find a high p -value when you run your statistical test, meaning that your results could have occurred under the null hypothesis of no relationship between variables or no difference between groups.

If you want to calculate a confidence interval around the mean of data that is not normally distributed , you have two choices:

• Find a distribution that matches the shape of your data and use that distribution to calculate the confidence interval.
• Perform a transformation on your data to make it fit a normal distribution, and then find the confidence interval for the transformed data.

The standard normal distribution , also called the z -distribution, is a special normal distribution where the mean is 0 and the standard deviation is 1.

Any normal distribution can be converted into the standard normal distribution by turning the individual values into z -scores. In a z -distribution, z -scores tell you how many standard deviations away from the mean each value lies.

The z -score and t -score (aka z -value and t -value) show how many standard deviations away from the mean of the distribution you are, assuming your data follow a z -distribution or a t -distribution .

These scores are used in statistical tests to show how far from the mean of the predicted distribution your statistical estimate is. If your test produces a z -score of 2.5, this means that your estimate is 2.5 standard deviations from the predicted mean.

The predicted mean and distribution of your estimate are generated by the null hypothesis of the statistical test you are using. The more standard deviations away from the predicted mean your estimate is, the less likely it is that the estimate could have occurred under the null hypothesis .

To calculate the confidence interval , you need to know:

• The point estimate you are constructing the confidence interval for
• The critical values for the test statistic
• The standard deviation of the sample
• The sample size

Then you can plug these components into the confidence interval formula that corresponds to your data. The formula depends on the type of estimate (e.g. a mean or a proportion) and on the distribution of your data.

The confidence level is the percentage of times you expect to get close to the same estimate if you run your experiment again or resample the population in the same way.

The confidence interval consists of the upper and lower bounds of the estimate you expect to find at a given level of confidence.

For example, if you are estimating a 95% confidence interval around the mean proportion of female babies born every year based on a random sample of babies, you might find an upper bound of 0.56 and a lower bound of 0.48. These are the upper and lower bounds of the confidence interval. The confidence level is 95%.

The mean is the most frequently used measure of central tendency because it uses all values in the data set to give you an average.

For data from skewed distributions, the median is better than the mean because it isn’t influenced by extremely large values.

The mode is the only measure you can use for nominal or categorical data that can’t be ordered.

The measures of central tendency you can use depends on the level of measurement of your data.

• For a nominal level, you can only use the mode to find the most frequent value.
• For an ordinal level or ranked data, you can also use the median to find the value in the middle of your data set.
• For interval or ratio levels, in addition to the mode and median, you can use the mean to find the average value.

Measures of central tendency help you find the middle, or the average, of a data set.

The 3 most common measures of central tendency are the mean, median and mode.

• The mode is the most frequent value.
• The median is the middle number in an ordered data set.
• The mean is the sum of all values divided by the total number of values.

Some variables have fixed levels. For example, gender and ethnicity are always nominal level data because they cannot be ranked.

However, for other variables, you can choose the level of measurement . For example, income is a variable that can be recorded on an ordinal or a ratio scale:

• At an ordinal level , you could create 5 income groupings and code the incomes that fall within them from 1–5.
• At a ratio level , you would record exact numbers for income.

If you have a choice, the ratio level is always preferable because you can analyze data in more ways. The higher the level of measurement, the more precise your data is.

The level at which you measure a variable determines how you can analyze your data.

Depending on the level of measurement , you can perform different descriptive statistics to get an overall summary of your data and inferential statistics to see if your results support or refute your hypothesis .

Levels of measurement tell you how precisely variables are recorded. There are 4 levels of measurement, which can be ranked from low to high:

• Nominal : the data can only be categorized.
• Ordinal : the data can be categorized and ranked.
• Interval : the data can be categorized and ranked, and evenly spaced.
• Ratio : the data can be categorized, ranked, evenly spaced and has a natural zero.

No. The p -value only tells you how likely the data you have observed is to have occurred under the null hypothesis .

If the p -value is below your threshold of significance (typically p < 0.05), then you can reject the null hypothesis, but this does not necessarily mean that your alternative hypothesis is true.

The alpha value, or the threshold for statistical significance , is arbitrary – which value you use depends on your field of study.

In most cases, researchers use an alpha of 0.05, which means that there is a less than 5% chance that the data being tested could have occurred under the null hypothesis.

P -values are usually automatically calculated by the program you use to perform your statistical test. They can also be estimated using p -value tables for the relevant test statistic .

P -values are calculated from the null distribution of the test statistic. They tell you how often a test statistic is expected to occur under the null hypothesis of the statistical test, based on where it falls in the null distribution.

If the test statistic is far from the mean of the null distribution, then the p -value will be small, showing that the test statistic is not likely to have occurred under the null hypothesis.

A p -value , or probability value, is a number describing how likely it is that your data would have occurred under the null hypothesis of your statistical test .

The test statistic you use will be determined by the statistical test.

You can choose the right statistical test by looking at what type of data you have collected and what type of relationship you want to test.

The test statistic will change based on the number of observations in your data, how variable your observations are, and how strong the underlying patterns in the data are.

For example, if one data set has higher variability while another has lower variability, the first data set will produce a test statistic closer to the null hypothesis , even if the true correlation between two variables is the same in either data set.

The formula for the test statistic depends on the statistical test being used.

Generally, the test statistic is calculated as the pattern in your data (i.e. the correlation between variables or difference between groups) divided by the variance in the data (i.e. the standard deviation ).

• Univariate statistics summarize only one variable  at a time.
• Bivariate statistics compare two variables .
• Multivariate statistics compare more than two variables .

The 3 main types of descriptive statistics concern the frequency distribution, central tendency, and variability of a dataset.

• Distribution refers to the frequencies of different responses.
• Measures of central tendency give you the average for each response.
• Measures of variability show you the spread or dispersion of your dataset.

Descriptive statistics summarize the characteristics of a data set. Inferential statistics allow you to test a hypothesis or assess whether your data is generalizable to the broader population.

In statistics, model selection is a process researchers use to compare the relative value of different statistical models and determine which one is the best fit for the observed data.

The Akaike information criterion is one of the most common methods of model selection. AIC weights the ability of the model to predict the observed data against the number of parameters the model requires to reach that level of precision.

AIC model selection can help researchers find a model that explains the observed variation in their data while avoiding overfitting.

In statistics, a model is the collection of one or more independent variables and their predicted interactions that researchers use to try to explain variation in their dependent variable.

You can test a model using a statistical test . To compare how well different models fit your data, you can use Akaike’s information criterion for model selection.

The Akaike information criterion is calculated from the maximum log-likelihood of the model and the number of parameters (K) used to reach that likelihood. The AIC function is 2K – 2(log-likelihood) .

Lower AIC values indicate a better-fit model, and a model with a delta-AIC (the difference between the two AIC values being compared) of more than -2 is considered significantly better than the model it is being compared to.

The Akaike information criterion is a mathematical test used to evaluate how well a model fits the data it is meant to describe. It penalizes models which use more independent variables (parameters) as a way to avoid over-fitting.

AIC is most often used to compare the relative goodness-of-fit among different models under consideration and to then choose the model that best fits the data.

A factorial ANOVA is any ANOVA that uses more than one categorical independent variable . A two-way ANOVA is a type of factorial ANOVA.

Some examples of factorial ANOVAs include:

• Testing the combined effects of vaccination (vaccinated or not vaccinated) and health status (healthy or pre-existing condition) on the rate of flu infection in a population.
• Testing the effects of marital status (married, single, divorced, widowed), job status (employed, self-employed, unemployed, retired), and family history (no family history, some family history) on the incidence of depression in a population.
• Testing the effects of feed type (type A, B, or C) and barn crowding (not crowded, somewhat crowded, very crowded) on the final weight of chickens in a commercial farming operation.

In ANOVA, the null hypothesis is that there is no difference among group means. If any group differs significantly from the overall group mean, then the ANOVA will report a statistically significant result.

Significant differences among group means are calculated using the F statistic, which is the ratio of the mean sum of squares (the variance explained by the independent variable) to the mean square error (the variance left over).

If the F statistic is higher than the critical value (the value of F that corresponds with your alpha value, usually 0.05), then the difference among groups is deemed statistically significant.

The only difference between one-way and two-way ANOVA is the number of independent variables . A one-way ANOVA has one independent variable, while a two-way ANOVA has two.

• One-way ANOVA : Testing the relationship between shoe brand (Nike, Adidas, Saucony, Hoka) and race finish times in a marathon.
• Two-way ANOVA : Testing the relationship between shoe brand (Nike, Adidas, Saucony, Hoka), runner age group (junior, senior, master’s), and race finishing times in a marathon.

All ANOVAs are designed to test for differences among three or more groups. If you are only testing for a difference between two groups, use a t-test instead.

Multiple linear regression is a regression model that estimates the relationship between a quantitative dependent variable and two or more independent variables using a straight line.

Linear regression most often uses mean-square error (MSE) to calculate the error of the model. MSE is calculated by:

• measuring the distance of the observed y-values from the predicted y-values at each value of x;
• squaring each of these distances;
• calculating the mean of each of the squared distances.

Linear regression fits a line to the data by finding the regression coefficient that results in the smallest MSE.

Simple linear regression is a regression model that estimates the relationship between one independent variable and one dependent variable using a straight line. Both variables should be quantitative.

For example, the relationship between temperature and the expansion of mercury in a thermometer can be modeled using a straight line: as temperature increases, the mercury expands. This linear relationship is so certain that we can use mercury thermometers to measure temperature.

A regression model is a statistical model that estimates the relationship between one dependent variable and one or more independent variables using a line (or a plane in the case of two or more independent variables).

A regression model can be used when the dependent variable is quantitative, except in the case of logistic regression, where the dependent variable is binary.

A t-test should not be used to measure differences among more than two groups, because the error structure for a t-test will underestimate the actual error when many groups are being compared.

If you want to compare the means of several groups at once, it’s best to use another statistical test such as ANOVA or a post-hoc test.

A one-sample t-test is used to compare a single population to a standard value (for example, to determine whether the average lifespan of a specific town is different from the country average).

A paired t-test is used to compare a single population before and after some experimental intervention or at two different points in time (for example, measuring student performance on a test before and after being taught the material).

A t-test measures the difference in group means divided by the pooled standard error of the two group means.

In this way, it calculates a number (the t-value) illustrating the magnitude of the difference between the two group means being compared, and estimates the likelihood that this difference exists purely by chance (p-value).

Your choice of t-test depends on whether you are studying one group or two groups, and whether you care about the direction of the difference in group means.

If you are studying one group, use a paired t-test to compare the group mean over time or after an intervention, or use a one-sample t-test to compare the group mean to a standard value. If you are studying two groups, use a two-sample t-test .

If you want to know only whether a difference exists, use a two-tailed test . If you want to know if one group mean is greater or less than the other, use a left-tailed or right-tailed one-tailed test .

A t-test is a statistical test that compares the means of two samples . It is used in hypothesis testing , with a null hypothesis that the difference in group means is zero and an alternate hypothesis that the difference in group means is different from zero.

Statistical significance is a term used by researchers to state that it is unlikely their observations could have occurred under the null hypothesis of a statistical test . Significance is usually denoted by a p -value , or probability value.

Statistical significance is arbitrary – it depends on the threshold, or alpha value, chosen by the researcher. The most common threshold is p < 0.05, which means that the data is likely to occur less than 5% of the time under the null hypothesis .

When the p -value falls below the chosen alpha value, then we say the result of the test is statistically significant.

A test statistic is a number calculated by a  statistical test . It describes how far your observed data is from the  null hypothesis  of no relationship between  variables or no difference among sample groups.

The test statistic tells you how different two or more groups are from the overall population mean , or how different a linear slope is from the slope predicted by a null hypothesis . Different test statistics are used in different statistical tests.

Statistical tests commonly assume that:

• the data are normally distributed
• the groups that are being compared have similar variance
• the data are independent

If your data does not meet these assumptions you might still be able to use a nonparametric statistical test , which have fewer requirements but also make weaker inferences.

Ask our team

Want to contact us directly? No problem.  We  are always here for you.

• Email [email protected]
• Start live chat
• Call +1 (510) 822-8066
• WhatsApp +31 20 261 6040

Our team helps students graduate by offering:

• A world-class citation generator
• Plagiarism Checker software powered by Turnitin
• Innovative Citation Checker software
• Professional proofreading services
• Over 300 helpful articles about academic writing, citing sources, plagiarism, and more

Scribbr specializes in editing study-related documents . We proofread:

• PhD dissertations
• Research proposals
• Personal statements
• Admission essays
• Motivation letters
• Reflection papers
• Journal articles
• Capstone projects

Scribbr’s Plagiarism Checker is powered by elements of Turnitin’s Similarity Checker , namely the plagiarism detection software and the Internet Archive and Premium Scholarly Publications content databases .

The add-on AI detector is powered by Scribbr’s proprietary software.

The Scribbr Citation Generator is developed using the open-source Citation Style Language (CSL) project and Frank Bennett’s citeproc-js . It’s the same technology used by dozens of other popular citation tools, including Mendeley and Zotero.

You can find all the citation styles and locales used in the Scribbr Citation Generator in our publicly accessible repository on Github .

What is an Alternative Hypothesis in Statistics?

Often in statistics we want to test whether or not some assumption is true about a population parameter .

For example, we might assume that the mean weight of a certain population of turtle is 300 pounds.

To determine if this assumption is true, we’ll go out and collect a sample of turtles and weigh each of them. Using this sample data, we’ll conduct a hypothesis test .

The first step in a hypothesis test is to define the  null and  alternative hypotheses .

These two hypotheses need to be mutually exclusive, so if one is true then the other must be false.

These two hypotheses are defined as follows:

Null hypothesis (H 0 ): The sample data is consistent with the prevailing belief about the population parameter.

Alternative hypothesis (H A ): The sample data suggests that the assumption made in the null hypothesis is not true. In other words, there is some non-random cause influencing the data.

Types of Alternative Hypotheses

There are two types of alternative hypotheses:

A  one-tailed hypothesis involves making a “greater than” or “less than ” statement. For example, suppose we assume the mean height of a male in the U.S. is greater than or equal to 70 inches.

The null and alternative hypotheses in this case would be:

• Null hypothesis: µ ≥ 70 inches
• Alternative hypothesis: µ

A  two-tailed hypothesis involves making an “equal to” or “not equal to” statement. For example, suppose we assume the mean height of a male in the U.S. is equal to 70 inches.

• Null hypothesis: µ = 70 inches
• Alternative hypothesis: µ ≠ 70 inches

Note: The “equal” sign is always included in the null hypothesis, whether it is =, ≥, or ≤.

Examples of Alternative Hypotheses

The following examples illustrate how to define the null and alternative hypotheses for different research problems.

Example 1: A biologist wants to test if the mean weight of a certain population of turtle is different from the widely-accepted mean weight of 300 pounds.

The null and alternative hypothesis for this research study would be:

• Null hypothesis: µ = 300 pounds
• Alternative hypothesis: µ ≠ 300 pounds

If we reject the null hypothesis, this means we have sufficient evidence from the sample data to say that the true mean weight of this population of turtles is different from 300 pounds.

Example 2: An engineer wants to test whether a new battery can produce higher mean watts than the current industry standard of 50 watts.

• Null hypothesis: µ ≤ 50 watts
• Alternative hypothesis: µ > 50 watts

If we reject the null hypothesis, this means we have sufficient evidence from the sample data to say that the true mean watts produced by the new battery is greater than the current industry standard of 50 watts.

Example 3: A botanist wants to know if a new gardening method produces less waste than the standard gardening method that produces 20 pounds of waste.

• Null hypothesis: µ ≥ 20 pounds

If we reject the null hypothesis, this means we have sufficient evidence from the sample data to say that the true mean weight produced by this new gardening method is less than 20 pounds.

When to Reject the Null Hypothesis

Whenever we conduct a hypothesis test, we use sample data to calculate a test-statistic and a corresponding p-value.

If the p-value is less than some significance level (common choices are 0.10, 0.05, and 0.01), then we reject the null hypothesis.

This means we have sufficient evidence from the sample data to say that the assumption made by the null hypothesis is not true.

If the p-value is  not less than some significance level, then we fail to reject the null hypothesis.

This means our sample data did not provide us with evidence that the assumption made by the null hypothesis was not true.

Additional Resource:   An Explanation of P-Values and Statistical Significance

What is an Observation in Statistics?

What is the erlang distribution, related posts, how to normalize data between -1 and 1, vba: how to check if string contains another..., how to interpret f-values in a two-way anova, how to create a vector of ones in..., how to determine if a probability distribution is..., what is a symmetric histogram (definition & examples), how to find the mode of a histogram..., how to find quartiles in even and odd..., how to calculate sxy in statistics (with example), how to calculate sxx in statistics (with example).

• School Guide
• Mathematics
• Number System and Arithmetic
• Trigonometry
• Probability
• Mensuration
• Maths Formulas
• Class 8 Maths Notes
• Class 9 Maths Notes
• Class 10 Maths Notes
• Class 11 Maths Notes
• Class 12 Maths Notes

Alternative Hypothesis: Definition, Types and Examples

In statistical hypothesis testing, the alternative hypothesis is an important proposition in the hypothesis test. The goal of the hypothesis test is to demonstrate that in the given condition, there is sufficient evidence supporting the credibility of the alternative hypothesis instead of the default assumption made by the null hypothesis.

Alternative Hypotheses

Both hypotheses include statements with the same purpose of providing the researcher with a basic guideline. The researcher uses the statement from each hypothesis to guide their research. In statistics, alternative hypothesis is often denoted as H a or H 1 .

Table of Content

What is a Hypothesis?

Alternative hypothesis, types of alternative hypothesis, difference between null and alternative hypothesis, formulating an alternative hypothesis, example of alternative hypothesis, application of alternative hypothesis.

“A hypothesis is a statement of a relationship between two or more variables.” It is a working statement or theory that is based on insufficient evidence.

While experimenting, researchers often make a claim, that they can test. These claims are often based on the relationship between two or more variables. “What causes what?” and “Up to what extent?” are a few of the questions that a hypothesis focuses on answering. The hypothesis can be true or false, based on complete evidence.

While there are different hypotheses, we discuss only null and alternate hypotheses. The null hypothesis, denoted H o , is the default position where variables do not have a relation with each other. That means the null hypothesis is assumed true until evidence indicates otherwise. The alternative hypothesis, denoted H 1 , on the other hand, opposes the null hypothesis. It assumes a relation between the variables and serves as evidence to reject the null hypothesis.

Example of Hypothesis:

Mean age of all college students is 20.4 years. (simple hypothesis).

An Alternative Hypothesis is a claim or a complement to the null hypothesis. If the null hypothesis predicts a statement to be true, the Alternative Hypothesis predicts it to be false. Let’s say the null hypothesis states there is no difference between height and shoe size then the alternative hypothesis will oppose the claim by stating that there is a relation.

We see that the null hypothesis assumes no relationship between the variables whereas an alternative hypothesis proposes a significant relation between variables. An alternative theory is the one tested by the researcher and if the researcher gathers enough data to support it, then the alternative hypothesis replaces the null hypothesis.

Null and alternative hypotheses are exhaustive, meaning that together they cover every possible outcome. They are also mutually exclusive, meaning that only one can be true at a time.

There are a few types of alternative hypothesis that we will see:

1. One-tailed test H 1 : A one-tailed alternative hypothesis focuses on only one region of rejection of the sampling distribution. The region of rejection can be upper or lower.

• Upper-tailed test H 1 : Population characteristic > Hypothesized value
• Lower-tailed test H 1 : Population characteristic < Hypothesized value

2. Two-tailed test H 1 : A two-tailed alternative hypothesis is concerned with both regions of rejection of the sampling distribution.

3. Non-directional test H 1 : A non-directional alternative hypothesis is not concerned with either region of rejection; rather, it is only concerned that null hypothesis is not true.

4. Point test H 1 : Point alternative hypotheses occur when the hypothesis test is framed so that the population distribution under the alternative hypothesis is a fully defined distribution, with no unknown parameters; such hypotheses are usually of no practical interest but are fundamental to theoretical considerations of statistical inference and are the basis of the Neyman–Pearson lemma.

the differences between Null Hypothesis and Alternative Hypothesis is explained in the table below:

Formulating an alternative hypothesis means identifying the relationships, effects or condition being studied. Based on the data we conclude that there is a different inference from the null-hypothesis being considered.

• Understand the null hypothesis.
• Consider the alternate hypothesis
• Choose the type of alternate hypothesis (one-tailed or two-tailed)

Alternative hypothesis must be true when the null hypothesis is false. When trying to identify the information need for alternate hypothesis statement, look for the following phrases:

• “Is it reasonable to conclude…”
• “Is there enough evidence to substantiate…”
• “Does the evidence suggest…”
• “Has there been a significant…”

When alternative hypotheses in mathematical terms, they always include an inequality ( usually ≠, but sometimes < or >) . When writing the alternate hypothesis, make sure it never includes an “=” symbol.

To help you write your hypotheses, you can use the template sentences below.

Does independent variable affect dependent variable?

• Null Hypothesis (H 0 ): Independent variable does not affect dependent variable.
• Alternative Hypothesis (H a ): Independent variable affects dependent variable.

Various examples of Alternative Hypothesis includes:

Two-Tailed Example

• Research Question : Do home games affect a team’s performance?
• Null-Hypothesis: Home games do not affect a team’s performance.
• Alternative Hypothesis: Home games have an effect on team’s performance.
• Research Question: Does sleeping less lead to depression?
• Null-Hypothesis: Sleeping less does not have an effect on depression.
• Alternative Hypothesis : Sleeping less has an effect on depression.

One-Tailed Example

• Research Question: Are candidates with experience likely to get a job?
• Null-Hypothesis: Experience does not matter in getting a job.
• Alternative Hypothesis: Candidates with work experience are more likely to receive an interview.
• Alternative Hypothesis : Teams with home advantage are more likely to win a match.

Some applications of Alternative Hypothesis includes:

• Rejecting Null-Hypothesis : A researcher performs additional research to find flaws in the null hypothesis. Following the research, which uses the alternative hypothesis as a guide, they may decide whether they have enough evidence to reject the null hypothesis.
• Guideline for Research : An alternative and null hypothesis include statements with the same purpose of providing the researcher with a basic guideline. The researcher uses the statement from each hypothesis to guide their research.
• New Theories : Alternative hypotheses can provide the opportunity to discover new theories that a researcher can use to disprove an existing theory that may not have been backed up by evidence.

We defined the relationship that exist between null-hypothesis and alternative hypothesis. While the null hypothesis is always a default assumption about our test data, the alternative hypothesis puts in all the effort to make sure the null hypothesis is disproved.

Null-hypothesis always explores new relationships between the independent variables to find potential outcomes from our test data. We should note that for every null hypothesis, one or more alternate hypotheses can be developed.

Also Check:

Mathematics Maths Formulas Branches of Mathematics

FAQs on Alternative Hypothesis

What is hypothesis.

A hypothesis is a statement of a relationship between two or more variables.” It is a working statement or theory that is based on insufficient evidence.

What is an Alternative Hypothesis?

Alternative hypothesis, denoted by H 1 , opposes the null-hypothesis. It assumes a relation between the variables and serves as an evidence to reject the null-hypothesis.

What is the Difference between Null-Hypothesis and Alternative Hypothesis?

Null hypothesis is the default claim that assumes no relationship between variables while alternative hypothesis is the opposite claim which considers statistical significance between the variables.

What is Alternative and Experimental Hypothesis?

Null hypothesis (H 0 ) states there is no effect or difference, while the alternative hypothesis (H 1 or H a ) asserts the presence of an effect, difference, or relationship between variables. In hypothesis testing, we seek evidence to either reject the null hypothesis in favor of the alternative hypothesis or fail to do so.

Please Login to comment...

Similar reads.

• School Learning
• Math-Statistics
• California Lawmakers Pass Bill to Limit AI Replicas
• Best 10 IPTV Service Providers in Germany
• Python 3.13 Releases | Enhanced REPL for Developers
• IPTV Anbieter in Deutschland - Top IPTV Anbieter Abonnements
• Content Improvement League 2024: From Good To A Great Article

Improve your Coding Skills with Practice

What kind of Experience do you want to share?

What is an Alternative Hypothesis? Definition, Types, and Examples

The alternative hypothesis is a way to propose a contrasting view on a proposed theory by a researcher. It tries to prove the original statement provided by the null statement false.

What is an Alternative Hypothesis?

An alternative hypothesis is a contradictory theory to that taken by a Null Hypothesis about a specified research parameter.

The null hypothesis proposes that there is no relation between the independent and dependent variables in a population parameter. If the null hypothesis is true, then these variables do not change mutually.

Understanding Alternative Hypothesis

Similarly, hypothesis testing directly compares the observed data in a defined population data set with the Null hypothesis results.

Types of Alternative Hypothesis

There are two main types of alternative hypotheses.

Two-Tailed or Non-Directional Hypothesis

Examples of Alternative Hypothesis

Suppose a high school proposes that providing a laptop to all students during classes will improve their grades among other students in the school.

At the same time, the school can propose an alternative hypothesis stating:

An investment firm wants to set up an index fund following the S&P500 index. The null hypothesis states an index fund generates a 10% rate of return when followed the same way as S&P500.

Null Hypothesis Vs. Alternative Hypothesis – Key Differences

An alternative hypothesis assumes the null statement is wrong. It means it discredits the original statements or tries to prove that statement false.

Hypothesis Tests

Result Interpretations (implication)

Similarly, the alternative hypothesis can be right or wrong. Further research can propose another point of view and another alternative theory.

Related Posts

7 best internal source of fund that company could benefit from (example and explanation), 5 nature and 7 scope of financial management you should know, what is operating gearing definition, formula, example, and usages, what is financial gearing and why is it happening.

Microbe Notes

Null hypothesis and alternative hypothesis with 9 differences

Table of Contents

Interesting Science Videos

Null hypothesis definition

The null hypothesis is a general statement that states that there is no relationship between two phenomenons under consideration or that there is no association between two groups.

• A hypothesis, in general, is an assumption that is yet to be proved with sufficient pieces of evidence. A null hypothesis thus is the hypothesis a researcher is trying to disprove.
• A null hypothesis is a hypothesis capable of being objectively verified, tested, and even rejected.
• If a study is to compare method A with method B about their relationship, and if the study is preceded on the assumption that both methods are equally good, then this assumption is termed as the null hypothesis.
• The null hypothesis should always be a specific hypothesis, i.e., it should not state about or approximately a certain value.

Null hypothesis symbol

• The symbol for the null hypothesis is H 0, and it is read as H-null, H-zero, or H-naught.
• The null hypothesis is usually associated with just ‘equals to’ sign as a null hypothesis can either be accepted or rejected.

Null hypothesis purpose

• The main purpose of a null hypothesis is to verify/ disprove the proposed statistical assumptions.
• Some scientific null hypothesis help to advance a theory.
• The null hypothesis is also used to verify the consistent results of multiple experiments. For e.g., the null hypothesis stating that there is no relation between some medication and age of the patients supports the general effectiveness conclusion, and allows recommendations.

Null hypothesis principle

• The principle of the null hypothesis is collecting the data and determining the chances of the collected data in the study of a random sample, proving that the null hypothesis is true.
• In situations or studies where the collected data doesn’t complete the expectation of the null hypothesis, it is concluded that the data doesn’t provide sufficient or reliable pieces of evidence to support the null hypothesis and thus, it is rejected.
• The data collected is tested through some statistical tool which is designed to measure the extent of departure of the date from the null hypothesis.
• The procedure decides whether the observed departure obtained from the statistical tool is larger than a defined value so that the probability of occurrence of a high departure value is very small under the null hypothesis.
• However, some data might not contradict the null hypothesis which explains that only a weak conclusion can be made and that the data doesn’t provide strong pieces of evidence against the null hypothesis and the null hypothesis might or might not be true.
• Under some other conditions, if the data collected is sufficient and is capable of providing enough evidence, the null hypothesis can be considered valid, indicating no relationship between the phenomena.

When to reject null hypothesis?

• When the p-value of the data is less than the significant level of the test, the null hypothesis is rejected, indicating the test results are significant.
• However, if the p-value is higher than the significant value, the null hypothesis is not rejected, and the results are considered not significant.
• The level of significance is an important concept while hypothesis testing as it determines the percentage risk of rejecting the null hypothesis when H 0 might happen to be true.
• In other words, if we take the level of significance at 5%, it means that the researcher is willing to take as much as a 5 percent risk of rejecting the null hypothesis when it (H 0 ) happens to be true.
• The null hypothesis cannot be accepted because the lack of evidence only means that the relationship is not proven. It doesn’t prove that something doesn’t exist, but it just means that there are not enough shreds of evidence and the study might have missed it.

Null hypothesis examples

The following are some examples of null hypothesis:

• If the hypothesis is that “the consumption of a particular medicine reduces the chances of heart arrest”, the null hypothesis will be “the consumption of the medicine doesn’t reduce the chances of heart arrest.”
• If the hypothesis is that, “If random test scores are collected from men and women, does the score of one group differ from the other?” a possible null hypothesis will be that the mean test score of men is the same as that of the women.

H 0 : µ 1 = µ 2

H 0 = null hypothesis µ 1 = mean score of men µ 2 = mean score of women

Alternative hypothesis definition

An alternative hypothesis is a statement that describes that there is a relationship between two selected variables in a study.

• An alternative hypothesis is usually used to state that a new theory is preferable to the old one (null hypothesis).
• This hypothesis can be simply termed as an alternative to the null hypothesis.
• The alternative hypothesis is the hypothesis that is to be proved that indicates that the results of a study are significant and that the sample observation is not results just from chance but from some non-random cause.
• If a study is to compare method A with method B about their relationship and we assume that the method A is superior or the method B is inferior, then such a statement is termed as an alternative hypothesis.
• Alternative hypotheses should be clearly stated, considering the nature of the research problem.

Alternative hypothesis symbol

• The symbol of the alternative hypothesis is either H 1 or H a while using less than, greater than or not equal signs.

Alternative hypothesis purpose

• An alternative hypothesis provides the researchers with some specific restatements and clarifications of the research problem.
• An alternative hypothesis provides a direction to the study, which then can be utilized by the researcher to obtain the desired results.
• Since the alternative hypothesis is selected before conducting the study, it allows the test to prove that the study is supported by evidence, separating it from the researchers’ desires and values.
• An alternative hypothesis provides a chance of discovering new theories that can disprove an existing one that might not be supported by evidence.
• The alternative hypothesis is important as they prove that a relationship exists between two variables selected and that the results of the study conducted are relevant and significant.

Alternative hypothesis principle

• The principle behind the alternative hypothesis is similar to that of the null hypothesis.
• The alternative hypothesis is based on the concept that when sufficient evidence is collected from the data of random sample, it provides a basis for proving the assumption made by the researcher regarding the study.
• Like in the null hypothesis, the data collected from a random sample is passed through a statistical tool that measures the extent of departure of the data from the null hypothesis.
• If the departure is small under the selected level of significance, the alternative hypothesis is accepted, and the null hypothesis is rejected.
• If the data collected don’t have chances of being in the study of the random sample and are instead decided by the relationship within the sample of the study, an alternative hypothesis stands true.

Alternative hypothesis examples

The following are some examples of alternative hypothesis:

1. If a researcher is assuming that the bearing capacity of a bridge is more than 10 tons, then the hypothesis under this study will be:

Null hypothesis H 0 : µ= 10 tons Alternative hypothesis H a : µ>10 tons

2. Under another study that is trying to test whether there is a significant difference between the effectiveness of medicine against heart arrest, the alternative hypothesis will be that there is a relationship between the medicine and chances of heart arrest.

Null hypothesis vs Alternative hypothesis

• R. Kothari (1990) Research Methodology. Vishwa Prakasan. India.
• https://www.statisticssolutions.com/null-hypothesis-and-alternative-hypothesis/
• https://byjus.com/maths/null-hypothesis/
• https://en.wikipedia.org/wiki/Null_hypothesis
• https://keydifferences.com/difference-between-null-and-alternative-hypothesis.html
• 5% – https://en.wikipedia.org/wiki/Null_hypothesis
• 3% – https://keydifferences.com/difference-between-null-and-alternative-hypothesis.html
• 2% – https://byjus.com/maths/null-hypothesis/
• 1% – https://www.wisdomjobs.com/e-university/research-methodology-tutorial-355/procedure-for-hypothesis-testing-11525.html
• 1% – https://www.thoughtco.com/definition-of-null-hypothesis-and-examples-605436
• 1% – https://www.quora.com/What-are-the-different-types-of-hypothesis-and-what-are-some-examples-of-them
• 1% – https://www.dummies.com/education/math/statistics/what-a-p-value-tells-you-about-statistical-data/
• 1% – https://www.coursehero.com/file/p7jfbal5/These-are-hypotheses-capable-of-being-objectively-verified-and-tested-Thus-we/
• 1% – https://support.minitab.com/en-us/minitab/18/help-and-how-to/modeling-statistics/anova/how-to/one-way-anova/interpret-the-results/all-statistics-and-graphs/methods/
• 1% – https://stats.stackexchange.com/questions/105319/test-whether-there-is-a-significant-difference-between-two-groups
• 1% – https://statisticsbyjim.com/hypothesis-testing/failing-reject-null-hypothesis/
• 1% – https://quizlet.com/45299306/statistics-flash-cards/
• <1% – https://www.thoughtco.com/significance-level-in-hypothesis-testing-1147177
• <1% – https://www.thoughtco.com/null-hypothesis-vs-alternative-hypothesis-3126413
• <1% – https://www.sagepub.com/sites/default/files/upm-binaries/40007_Chapter8.pdf
• <1% – https://www.differencebetween.com/difference-between-hypothesis-and-vs-assumption/
• <1% – https://www.coursehero.com/file/18076181/introduction-to-hypothesis/
• <1% – https://statisticsbyjim.com/glossary/significance-level/
• <1% – https://quizlet.com/164755799/research-methods-midterm-2-flash-cards/
• <1% – https://online.stat.psu.edu/statprogram/reviews/statistical-concepts/hypothesis-testing/p-value-approach

About Author

Anupama Sapkota

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

Null Hypothesis and Alternative Hypothesis

• Inferential Statistics
• Statistics Tutorials
• Probability & Games
• Descriptive Statistics
• Applications Of Statistics
• Math Tutorials
• Pre Algebra & Algebra
• Exponential Decay
• Worksheets By Grade
• Ph.D., Mathematics, Purdue University
• M.S., Mathematics, Purdue University
• B.A., Mathematics, Physics, and Chemistry, Anderson University

Hypothesis testing involves the careful construction of two statements: the null hypothesis and the alternative hypothesis. These hypotheses can look very similar but are actually different.

How do we know which hypothesis is the null and which one is the alternative? We will see that there are a few ways to tell the difference.

The Null Hypothesis

The null hypothesis reflects that there will be no observed effect in our experiment. In a mathematical formulation of the null hypothesis, there will typically be an equal sign. This hypothesis is denoted by H 0 .

The null hypothesis is what we attempt to find evidence against in our hypothesis test. We hope to obtain a small enough p-value that it is lower than our level of significance alpha and we are justified in rejecting the null hypothesis. If our p-value is greater than alpha, then we fail to reject the null hypothesis.

If the null hypothesis is not rejected, then we must be careful to say what this means. The thinking on this is similar to a legal verdict. Just because a person has been declared "not guilty", it does not mean that he is innocent. In the same way, just because we failed to reject a null hypothesis it does not mean that the statement is true.

For example, we may want to investigate the claim that despite what convention has told us, the mean adult body temperature is not the accepted value of 98.6 degrees Fahrenheit . The null hypothesis for an experiment to investigate this is “The mean adult body temperature for healthy individuals is 98.6 degrees Fahrenheit.” If we fail to reject the null hypothesis, then our working hypothesis remains that the average adult who is healthy has a temperature of 98.6 degrees. We do not prove that this is true.

If we are studying a new treatment, the null hypothesis is that our treatment will not change our subjects in any meaningful way. In other words, the treatment will not produce any effect in our subjects.

The Alternative Hypothesis

The alternative or experimental hypothesis reflects that there will be an observed effect for our experiment. In a mathematical formulation of the alternative hypothesis, there will typically be an inequality, or not equal to symbol. This hypothesis is denoted by either H a or by H 1 .

The alternative hypothesis is what we are attempting to demonstrate in an indirect way by the use of our hypothesis test. If the null hypothesis is rejected, then we accept the alternative hypothesis. If the null hypothesis is not rejected, then we do not accept the alternative hypothesis. Going back to the above example of mean human body temperature, the alternative hypothesis is “The average adult human body temperature is not 98.6 degrees Fahrenheit.”

If we are studying a new treatment, then the alternative hypothesis is that our treatment does, in fact, change our subjects in a meaningful and measurable way.

The following set of negations may help when you are forming your null and alternative hypotheses. Most technical papers rely on just the first formulation, even though you may see some of the others in a statistics textbook.

• Null hypothesis: “ x is equal to y .” Alternative hypothesis “ x is not equal to y .”
• Null hypothesis: “ x is at least y .” Alternative hypothesis “ x is less than y .”
• Null hypothesis: “ x is at most y .” Alternative hypothesis “ x is greater than y .”
• What 'Fail to Reject' Means in a Hypothesis Test
• Type I and Type II Errors in Statistics
• An Example of a Hypothesis Test
• The Runs Test for Random Sequences
• An Example of Chi-Square Test for a Multinomial Experiment
• The Difference Between Type I and Type II Errors in Hypothesis Testing
• What Level of Alpha Determines Statistical Significance?
• What Is the Difference Between Alpha and P-Values?
• What Is ANOVA?
• How to Find Critical Values with a Chi-Square Table
• Example of a Permutation Test
• Degrees of Freedom for Independence of Variables in Two-Way Table
• Example of an ANOVA Calculation
• How to Find Degrees of Freedom in Statistics
• How to Construct a Confidence Interval for a Population Proportion
• Degrees of Freedom in Statistics and Mathematics

Biostatistics

• Data Science
• Programming
• Social Science
• Certificates
• Undergraduate
• For Businesses
• FAQs and Knowledge Base

Test Yourself

• Instructors

Alternative Hypothesis

Alternative Hypothesis:

In hypothesis testing, there are two competing hypotheses – the null hypothesis and the alternative hypothesis. The null hypothesis usually reflects the status quo (for example, the proposed new treatment is ineffective and the observed results are just due to chance variation). The hypothesis which competes with the null hypothesis as an explanation for observed data is called the alternative hypothesis.

Browse Other Glossary Entries

Planning on taking an introductory statistics course, but not sure if you need to start at the beginning? Review the course description for each of our introductory statistics courses and estimate which best matches your level, then take the self test for that course. If you get all or almost all the questions correct, move on and take the next test.

Data Analytics

Considering becoming adata scientist, customer analyst or our data science certificate program?

Advanced Statistics Quiz

Looking at statistics for graduate programs or to enhance your foundational knowledge?

Regression Quiz

Entering the biostatistics field? Test your skill here.

Stay Informed

Read up on our latest blogs

Learn about our certificate programs

Find the right course for you

We'd love to answer your questions

Our mentors and academic advisors are standing by to help guide you towards the courses or program that makes the most sense for you and your goals.

300 W Main St STE 301, Charlottesville, VA 22903

(434) 973-7673

[email protected]

By submitting your information, you agree to receive email communications from Statistics.com. All information submitted is subject to our privacy policy . You may opt out of receiving communications at any time.

• Key Differences

Know the Differences & Comparisons

Difference Between Null and Alternative Hypothesis

Null hypothesis implies a statement that expects no difference or effect. On the contrary, an alternative hypothesis is one that expects some difference or effect. Null hypothesis This article excerpt shed light on the fundamental differences between null and alternative hypothesis.

Content: Null Hypothesis Vs Alternative Hypothesis

Comparison chart.

Definition of Null Hypothesis

A null hypothesis is a statistical hypothesis in which there is no significant difference exist between the set of variables. It is the original or default statement, with no effect, often represented by H 0 (H-zero). It is always the hypothesis that is tested. It denotes the certain value of population parameter such as µ, s, p. A null hypothesis can be rejected, but it cannot be accepted just on the basis of a single test.

Definition of Alternative Hypothesis

A statistical hypothesis used in hypothesis testing, which states that there is a significant difference between the set of variables. It is often referred to as the hypothesis other than the null hypothesis, often denoted by H 1 (H-one). It is what the researcher seeks to prove in an indirect way, by using the test. It refers to a certain value of sample statistic, e.g., x¯, s, p

The acceptance of alternative hypothesis depends on the rejection of the null hypothesis i.e. until and unless null hypothesis is rejected, an alternative hypothesis cannot be accepted.

Key Differences Between Null and Alternative Hypothesis

The important points of differences between null and alternative hypothesis are explained as under:

• A null hypothesis is a statement, in which there is no relationship between two variables. An alternative hypothesis is a statement; that is simply the inverse of the null hypothesis, i.e. there is some statistical significance between two measured phenomenon.
• A null hypothesis is what, the researcher tries to disprove whereas an alternative hypothesis is what the researcher wants to prove.
• A null hypothesis represents, no observed effect whereas an alternative hypothesis reflects, some observed effect.
• If the null hypothesis is accepted, no changes will be made in the opinions or actions. Conversely, if the alternative hypothesis is accepted, it will result in the changes in the opinions or actions.
• As null hypothesis refers to population parameter, the testing is indirect and implicit. On the other hand, the alternative hypothesis indicates sample statistic, wherein, the testing is direct and explicit.
• A null hypothesis is labelled as H 0 (H-zero) while an alternative hypothesis is represented by H 1 (H-one).
• The mathematical formulation of a null hypothesis is an equal sign but for an alternative hypothesis is not equal to sign.
• In null hypothesis, the observations are the outcome of chance whereas, in the case of the alternative hypothesis, the observations are an outcome of real effect.

There are two outcomes of a statistical test, i.e. first, a null hypothesis is rejected and alternative hypothesis is accepted, second, null hypothesis is accepted, on the basis of the evidence. In simple terms, a null hypothesis is just opposite of alternative hypothesis.

You Might Also Like:

Zipporah Thuo says

February 22, 2018 at 6:06 pm

The comparisons between the two hypothesis i.e Null hypothesis and the Alternative hypothesis are the best.Thank you.

Getu Gamo says

March 4, 2019 at 3:42 am

Thank you so much for the detail explanation on two hypotheses. Now I understood both very well, including their differences.

Jyoti Bhardwaj says

May 28, 2019 at 6:26 am

Thanks, Surbhi! Appreciate the clarity and precision of this content.

January 9, 2020 at 6:16 am

John Jenstad says

July 20, 2020 at 2:52 am

Thanks very much, Surbhi, for your clear explanation!!

Navita says

July 2, 2021 at 11:48 am

Thanks for the Comparison chart! it clears much of my doubt.

GURU UPPALA says

July 21, 2022 at 8:36 pm

Thanks for the Comparison chart!

Enock kipkoech says

September 22, 2022 at 1:57 pm

What are the examples of null hypothesis and substantive hypothesis

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Encyclopedia ›
• Alternative hypothesis

Definition Alternative hypothesis

Hypotheses  are derived from statistical observations  and facts, amongst other things, and take the form of statements or conclusions in particular contexts. When a hypothesis either contradicts or complements current knowledge, it is labeled the counter or alternative hypothesis. “The earth revolves around the sun” is an example of an early alternative hypothesis from the times of Copernicus, which goes against the established belief "The sun revolves around the earth." A hypothesis against the alternative hypothesis is known as the null hypothesis .

Please note that the definitions in our statistics encyclopedia are simplified explanations of terms. Our goal is to make the definitions accessible for a broad audience; thus it is possible that some definitions do not adhere entirely to scientific standards.

• Autocorrelation
• Artificial intelligence (AI)
• Arithmetic mean
• Approximation
• Aggregated data
• Acquiescence bias
• Absolute frequency

Alternative Hypothesis

Ai generator.

Diving deep into the realm of scientific research, the alternative hypothesis plays a pivotal role in steering investigations. It stands contrary to the null hypothesis , providing a different perspective or direction. This essential component often sets the foundation for groundbreaking discoveries. If you’re keen on understanding this concept further, our collection of alternative hypothesis statement examples, combined with a thorough writing guide and insightful tips, will serve as your comprehensive roadmap.

What is an Alternative hypothesis?

An alternative hypothesis is a statement used in statistical testing that indicates the presence of an effect, relationship, or difference. It stands in direct contrast to the null hypothesis, which posits that there is no effect or relationship. The alternative causual hypothesis provides a specific direction to the research and can be directional (e.g., one value is greater than another) or non-directional (e.g., two values are not equal).

What is an example of an Alternative hypothesis statement?

If a researcher is studying the effect of a new teaching method on student performance, the null hypothesis might be: “The new teaching method has no effect on student performance.” An example of an alternative hypothesis could be:

Directional: “Students exposed to the new teaching method will perform better than those who were not.” Non-directional: “Student performance will be different for those exposed to the new teaching method compared to those who were not.”

100 Alternative Hypothesis Statement Examples

Size: 188 KB

The alternative hypothesis symbolizes a statement of what a statistical hypothesis test is set to establish. Often contrasted with a null hypothesis, it indicates the expected direction of the tested relation. Dive into these varied thesis statement examples showcasing the core essence of alternative hypotheses.

• Smoking and Cancer : Smoking is positively related to lung cancer incidence.
• Diet and Weight Loss : The Atkins diet results in more weight loss than a conventional diet.
• Medication Efficiency : Drug A is more effective than Drug B in treating migraines.
• Exercise Duration : Engaging in physical activity for more than 30 minutes daily reduces depression symptoms.
• Class Size and Learning : Smaller class sizes lead to higher student test scores.
• Sugar Intake : Consuming more than 50 grams of sugar daily increases the risk of diabetes.
• Vitamin C and Cold : Vitamin C intake reduces the duration of the common cold.
• Sleep Duration : Sleeping less than 6 hours results in decreased cognitive function.
• Training Methods : Method X training increases employee productivity more than Method Y.
• Pollution Levels : Higher levels of industrial activity correlate with increased air pollution.
• Stress and Disease : Chronic stress has a positive relationship with heart diseases.
• Alcohol and Reaction Time : Alcohol consumption slows down reaction time.
• Meditation and Blood Pressure : Regular meditation lowers blood pressure.
• Organic Food : Consuming organic food leads to better gut health.
• Advertising : Increased advertising results in higher sales figures.
• Salary and Job Satisfaction : A higher salary correlates with job satisfaction.
• Age and Memory : As age increases, short-term memory retention decreases.
• Temperature and Aggression : Higher temperatures are associated with increased aggressive behavior.
• Social Media : Spending more than 2 hours on social media daily increases feelings of loneliness.
• Music and Concentration : Listening to classical music improves concentration during studies. …
• Recycling Habits : Communities with mandatory recycling policies have higher recycling rates.
• Urban Areas : Living in urban areas increases the likelihood of asthma.
• Pets and Loneliness : Owning a pet decreases feelings of loneliness.
• Reading Habits : Reading more than 3 books a month correlates with increased empathy.
• Green Spaces : Having access to green spaces reduces stress levels.
• Vaccination : Vaccination reduces the incidence of specific diseases.
• Chocolate and Mood : Consuming chocolate elevates mood.
• Remote Work : Working remotely improves overall work satisfaction.
• Financial Literacy : Financial literacy education reduces personal debt.
• Mindfulness and Anxiety : Practicing mindfulness decreases symptoms of anxiety. …
• Dietary Fiber : Higher dietary fiber intake is associated with lower risks of bowel cancer.
• Travel and Creativity : People who travel frequently are more creative.
• Education Level and Income : Individuals with higher education levels earn more income.
• Technology Adoption : People who receive technology training adapt to new devices faster.
• Parental Involvement and Academic Performance : Increased parental involvement enhances students’ academic performance.
• Exercise Frequency and Heart Health : Exercising at least five times a week improves heart health.
• Gender and Leadership Roles : Men are more likely to hold leadership positions in corporate settings.
• Social Support and Mental Health : Strong social support networks reduce the risk of depression.
• Quality of Sleep and Productivity : Better sleep quality leads to higher productivity levels.
• High-Fat Diet and Cholesterol Levels : A high-fat diet increases cholesterol levels.
• Caffeine Intake and Alertness : Higher caffeine intake enhances alertness and cognitive function.
• Online Shopping Habits : People who frequently shop online spend more money than in-store shoppers. …
• Education and Political Views : Higher education levels are associated with more liberal political views.
• Gender and Risk-Taking Behavior : Men are more likely to engage in risky behaviors.
• Temperature and Ice Cream Sales : Higher temperatures increase ice cream sales.
• Artificial Sweeteners and Weight Loss : Consuming products with artificial sweeteners aids in weight loss.
• Exercise and Stress Reduction : Regular exercise reduces stress levels.
• Music Genres and Mood : Listening to upbeat music improves mood.
• Online Learning and Engagement : Online learners are more engaged in virtual classroom discussions.
• Personality Traits and Job Performance : Extroverted individuals perform better in sales roles.
• Environmental Awareness and Recycling : Higher environmental awareness leads to more recycling practices.
• Social Media Usage and Self-Esteem : Excessive social media usage correlates with lower self-esteem. …
• Sleep Deprivation and Reaction Time : Sleep-deprived individuals have slower reaction times.
• Breakfast Consumption and Metabolism : Eating breakfast kickstarts metabolism for the day.
• Leadership Style and Employee Satisfaction : Transformational leadership style increases employee job satisfaction.
• Bilingualism and Cognitive Abilities : Bilingual individuals possess enhanced cognitive abilities.
• Video Game Playing and Aggression : Playing violent video games increases aggressive behavior.
• Hydration and Cognitive Function : Staying hydrated improves cognitive function.
• Parental Support and Academic Achievement : Supportive parenting leads to higher academic achievement.
• Workplace Flexibility and Work-Life Balance : Jobs with flexible schedules enhance work-life balance.
• Digital Learning and Knowledge Retention : Digital learning methods improve long-term knowledge retention.
• Art Exposure and Creativity : Exposure to various forms of art fosters creative thinking.
• Solar Energy Adoption and Utility Bills : Homes with solar energy systems experience lower utility bills.
• Parental Involvement and Student Behavior : Increased parental involvement reduces student behavioral issues.
• Team Diversity and Creativity : Diverse teams generate more creative solutions.
• Social Media Marketing and Brand Awareness : Social media marketing boosts brand awareness more than traditional methods.
• Morning Routine and Productivity : Following a structured morning routine enhances overall productivity.
• Music Training and Cognitive Development : Music training improves cognitive abilities in children.
• Employee Training and Job Satisfaction : Comprehensive employee training programs lead to higher job satisfaction.
• Eating Before Bed and Sleep Quality : Consuming heavy meals before bed negatively affects sleep quality.
• Financial Incentives and Employee Performance : Offering financial incentives increases employee performance.
• Parental Attachment and Emotional Well-being : Strong parental attachment fosters better emotional well-being in children.
• Social Interaction and Mental Well-being : Frequent social interaction correlates with improved mental health.
• Education and Crime Rates : Higher education levels result in lower crime rates within communities.
• Diet and Acne : A diet high in dairy products exacerbates acne.
• Leadership Style and Employee Motivation : Autocratic leadership style hampers employee motivation.
• Urban Green Spaces and Stress Reduction : Access to urban green spaces lowers stress levels.
• Sleep Duration and Athletic Performance : Adequate sleep duration enhances athletic performance.
• Financial Literacy and Investment Success : Individuals with high financial literacy make more successful investments.
• Team Collaboration and Project Success : Effective team collaboration leads to more successful project outcomes.
• Media Exposure and Body Image : Increased media exposure contributes to negative body image perceptions.
• Gender Representation and Film Success : Movies with more balanced gender representation achieve higher box office success. …
• Meditation and Anxiety Reduction : Regular meditation practice reduces symptoms of anxiety.
• Cognitive Training and Memory Enhancement : Cognitive training programs improve memory retention.
• Positive Affirmations and Self-Confidence : Repeating positive affirmations enhances self-confidence.
• Physical Fitness and Longevity : Being physically fit is linked to increased lifespan.
• Parental Guidance and Online Safety : Strong parental guidance promotes responsible online behavior in children.
• Artificial Intelligence and Job Displacement : Increased AI integration leads to more job displacement.
• Public Transportation Usage and Air Quality : Increased public transportation usage improves air quality in cities.
• Social Support and Addiction Recovery : Strong social support networks aid in addiction recovery.
• Gender Diversity and Company Performance : Companies with diverse gender representation outperform others.
• Mindfulness Meditation and Pain Management : Mindfulness meditation reduces perception of pain.
• Music Therapy and Autism : Music therapy improves social interaction skills in children with autism.
• Social Media Usage and Academic Performance : Excessive social media usage negatively impacts academic performance.
• Employee Engagement and Organizational Success : Higher employee engagement leads to greater organizational success.
• Healthy Eating and Longevity : A diet rich in fruits and vegetables contributes to a longer lifespan.
• Gender Stereotypes and Career Choice : Gender stereotypes influence career choices among young adults.
• Environmental Conservation Efforts and Biodiversity : Increased conservation efforts positively affect biodiversity.
• Volunteerism and Personal Well-being : Engaging in volunteer activities enhances personal well-being.
• Artificial Intelligence and Customer Service : AI-driven customer service improves user satisfaction.

Alternative Hypothesis Statement Examples in Research

In alternative research hypothesis propel investigations beyond the null. Examples span diverse fields, revealing the direction researchers expect their findings to take.

• Effect of Music on Concentration : Listening to classical music enhances concentration during study.
• Green Tea and Weight Loss : Green tea consumption leads to more significant weight loss than water intake.
• Parental Involvement and Academic Achievement : Active parental involvement boosts student academic achievement.
• Social Media Usage and Self-Esteem : Frequent social media use correlates with lower self-esteem.

Alternative Hypothesis Statement Examples in Business Research

Business research thrives on alternative hypotheses. Dive into these business-oriented examples that challenge null assumptions.

• Marketing Campaign Impact : Marketing campaign A generates higher conversion rates than campaign B.
• Employee Training and Productivity : Comprehensive employee training enhances workplace productivity.
• Work-Life Balance and Employee Satisfaction : Improved work-life balance increases employee job satisfaction.
• Customer Service Channel Effectiveness : Online chat support results in higher customer satisfaction compared to phone support.
• Branding Influence on Purchase Intent : Strong brand presence leads to increased purchase intent.

Directional Alternative Hypothesis Statement Examples

Directional hypothesis add clarity to research expectations. Explore these examples that predict specific outcomes.

• Exercise Frequency and Heart Health : Engaging in physical activity five times a week improves heart health.

Alternative Hypothesis Statement Examples in Psychology

Psychological studies benefit from well-crafted alternative hypotheses. These psychology hypothesis examples delve into the realm of human behavior and cognition.

• Mindfulness Meditation and Anxiety Reduction : Regular mindfulness practice reduces symptoms of anxiety.

Alternative Null Hypothesis Statement Examples

Explore alternative null hypothesis —statements asserting the absence of specific effects or differences.

• Coffee Consumption and Weight Gain : Increased coffee consumption does not lead to weight gain.
• Smartphone Usage and Sleep Quality : Using smartphones before bed does not impact sleep quality.
• Music Genre and Study Performance : Studying with rock music does not affect academic performance.
• Green Spaces and Stress Reduction : Access to green spaces does not decrease stress levels.
• Team Diversity and Project Success : Team diversity does not influence project success rates.

Alternative Hypothesis Statement Examples in Medical Research

Medical research relies on robust alternative hypotheses to drive scientific inquiry. These examples explore hypotheses in the realm of healthcare.

• Exercise and Diabetes Prevention : Regular exercise decreases the risk of developing type 2 diabetes.
• Medication A and Blood Pressure Reduction : Medication A leads to greater reduction in blood pressure compared to medication B.
• Nutritional Intake and Heart Disease : Higher intake of fruits and vegetables lowers the risk of heart disease.
• Stress Reduction Techniques and Anxiety Levels : Practicing stress reduction techniques decreases anxiety levels.
• Alternative Medicine and Pain Management : Alternative medicine therapies alleviate chronic pain more effectively than traditional treatments.

Alternative Hypothesis Statement Examples in Education Research

Education research thrives on alternative hypotheses to investigate innovative approaches. Explore examples that challenge conventional notions.

• Technology Integration and Student Engagement : Integrating technology enhances student engagement in the classroom.
• Project-Based Learning and Knowledge Retention : Project-based learning improves long-term knowledge retention.
• Teacher Professional Development and Student Performance : Effective teacher professional development positively impacts student academic performance.
• Inclusive Classroom Environment and Learning Outcomes : Inclusive classrooms lead to better learning outcomes for diverse students.
• Feedback Frequency and Writing Improvement : Frequent feedback results in greater improvement in student writing skills.

These examples showcase the pivotal role of alternative hypotheses across various disciplines, serving as the driving force behind scientific exploration and advancement.

What is the Alternative Hypothesis Formula?

The alternative hypothesis, denoted as “Ha” or “H1,” represents the assertion researchers aim to support through evidence. It stands in contrast to the null hypothesis (Ho), which suggests no effect or relationship. The formula for the alternative hypothesis varies based on the nature of the study:

• Directional Hypothesis : For studies with an expected direction, the formula takes the form of a prediction. For instance, “The new drug increases patient recovery rates.”
• Non-Directional Hypothesis : For exploratory studies, the formula reflects the possibility of any difference or effect. For example, “There is a difference in recovery rates between the two drugs.”

How do you start an Alternative Hypothesis?

Starting an alternative simple hypothesis involves framing a clear research statement that highlights the anticipated effect, relationship, or difference. To begin:

• Identify the Research Question: Determine the specific aspect you intend to explore or compare.
• Formulate a Hypothesis: Craft a statement that directly addresses the expected outcome.
• Include Variables: Introduce the relevant variables and their predicted connection.
• Be Clear and Specific: Ensure the alternative hypothesis is concise and unambiguous.

Is the Alternative Hypothesis a Claim or Statement?

The alternative hypothesis is both a claim and a statement. It claims that there is a measurable effect, relationship, or difference in the variables being studied. It is also a statement that researchers work to validate through evidence.

How do you write an Alternative Hypothesis Statement? – Step by Step Guide

Creating a robust alternative hypothesis statement involves structured steps:

• Identify Variables : Clearly define the independent and dependent variables in your study.
• State Expected Effect : Express the anticipated impact, relationship, or difference between variables.
• Be Precise : Use specific language to convey the exact nature of the expected outcome.
• Include Direction (if applicable) : If your hypothesis is directional, specify the expected direction.
• Avoid Ambiguity : Make sure your statement is clear and leaves no room for confusion.

Tips for Writing an Alternative Hypothesis Statement

• Be Specific : Clearly define the variables and the predicted relationship.
• Use Measurable Terms : Incorporate quantifiable terms to indicate the magnitude of the effect.
• Testability : Ensure the hypothesis can be tested empirically.
• Conciseness : Keep the statement concise and to the point.
• Alignment with Research Question : Ensure the hypothesis directly answers your research question.
• Avoid Value Judgments : Avoid value judgments or personal biases in the hypothesis.
• Review Literature : Consult existing literature to align your hypothesis with prior research.

Crafting a strong alternative hypothesis statement is essential for guiding your research and forming the basis for causual hypothesis testing. It directs the focus of your investigation and lays the foundation for drawing meaningful conclusions.

Text prompt

• Instructive
• Professional

10 Examples of Public speaking

20 Examples of Gas lighting

Physical Review A

Covering atomic, molecular, and optical physics and quantum science.

• Collections
• Editorial Team

Quantum distinguishability measures: Projectors versus state maximization

Adrián a. budini, ruynet l. de matos filho, and marcelo f. santos, phys. rev. a 110 , 022228 – published 30 august 2024.

• No Citing Articles
• INTRODUCTION
• DISTINGUISHABILITY MEASURE BASED ON…
• CONTRACTIVITY UNDER QUANTUM OPERATIONS
• SUMMARY AND CONCLUSIONS
• ACKNOWLEDGMENTS

The distinguishability between two quantum states can be defined in terms of their trace distance. The operational meaning of this definition involves a maximization over measurement projectors. Here we introduce an alternative definition of distinguishability which, instead of projectors, is based on maximization over normalized states (density matrices). It is shown that this procedure leads to a distance (between two states) that in contrast to the usual approach based on a 1-norm, is based on an infinite-norm. Properties such as convexity, monotonicity, and invariance under unitary transformations are fulfilled. Equivalent operational implementations based on maximization over classical probabilities and hypothesis-testing scenarios are also established. When considering the action of completely positive transformations, contractivity is only granted for unital maps. This feature allows us to introduce a measure of the quantumness of nonunital maps that can be written in terms of the proposed distinguishability measure and corresponds to the maximal possible deviation from contractivity. Particular examples sustain the main results and conclusions.

• Received 10 June 2024
• Accepted 16 August 2024

DOI: https://doi.org/10.1103/PhysRevA.110.022228

©2024 American Physical Society

Physics Subject Headings (PhySH)

• Research Areas

Authors & Affiliations

• 1 Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET ), Centro Atómico Bariloche , Avenida E. Bustillo Km 9.5, 8400 Bariloche, Argentina and Universidad Tecnológica Nacional (UTN-FRC) , Fanny Newbery 111, 8400 Bariloche, Argentina
• 2 Instituto de Física, Universidade Federal do Rio de Janeiro , Caixa Postal 68528, Rio de Janeiro 21941-972, Brazil

Article Text (Subscription Required)

References (subscription required).

Vol. 110, Iss. 2 — August 2024

Access Options

• Buy Article »
• Log in with individual APS Journal Account »
• Log in with a username/password provided by your institution »
• Get access through a U.S. public or high school library »

Authorization Required

Other options.

• Buy Article »
• Find an Institution with the Article »

Download & Share

Distances between the quantum states defined by Eq. ( 53 ). The full lines correspond to D ρ ( ρ A , ρ B ) , the dashed lines to D Π ( ρ A , ρ B ) , while the dotted lines correspond to 2 D ρ ( ρ A , ρ B ) . The figures show the dependence with the parameter s associated to ρ B . The left and right panels correspond to r = 0.1 and r = 0.5 , respectively, where r is the parameter associated to ρ A .

Witness W [Eq. ( 65 )] for the two qubit map ( 59 ) as a function of ( x , y ) and fixed z [Eq. ( 60 )]. The map parameters are γ a = 1 / 2 and γ b = 1 / 4 . The horizontal full line corresponds to the level curve W = 0 . The gray plane corresponds to the domain of ( x , y ) given that here, z = 0.5 .

Witness W [Eq. ( 65 )] for the two qubit map ( 59 ) as a function of ( x , y ) and fixed z [Eq. ( 60 )]. The map parameters are γ a = 1 / 2 and γ b = 0 . The horizontal full line corresponds to the level curve W = 0 . The gray plane corresponds to the domain of ( x , y ) given that here, z = 0.3 .

Domain of the parameters ( x , y , z ) that set the eigenvalues of the difference of states Δ = ρ A − ρ B defined by Eq. ( D5 ) (four-dimensional Hilbert space). The constraints on ( x , y , z ) are defined by Eqs. ( D6 ) and ( D7 ).

Sign up to receive regular email alerts from Physical Review A

• Forgot your username/password?
• Create an account

Article Lookup

Paste a citation or doi, enter a citation.

Legacy versions

The legacy versions of the Compose file reference has moved to the V1 branch of the Compose repository . They are no longer being actively maintained.

The latest and recommended version of the Compose file format is defined by the Compose Specification . This format merges the 2.x and 3.x versions and is implemented by Compose 1.27.0+ . For more information, see the History and development of Docker Compose .