Get science-backed answers as you write with Paperpal's Research feature

How to Write a Research Paper Introduction (with Examples)

How to Write a Research Paper Introduction (with Examples)

The research paper introduction section, along with the Title and Abstract, can be considered the face of any research paper. The following article is intended to guide you in organizing and writing the research paper introduction for a quality academic article or dissertation.

The research paper introduction aims to present the topic to the reader. A study will only be accepted for publishing if you can ascertain that the available literature cannot answer your research question. So it is important to ensure that you have read important studies on that particular topic, especially those within the last five to ten years, and that they are properly referenced in this section. 1 What should be included in the research paper introduction is decided by what you want to tell readers about the reason behind the research and how you plan to fill the knowledge gap. The best research paper introduction provides a systemic review of existing work and demonstrates additional work that needs to be done. It needs to be brief, captivating, and well-referenced; a well-drafted research paper introduction will help the researcher win half the battle.

The introduction for a research paper is where you set up your topic and approach for the reader. It has several key goals:

  • Present your research topic
  • Capture reader interest
  • Summarize existing research
  • Position your own approach
  • Define your specific research problem and problem statement
  • Highlight the novelty and contributions of the study
  • Give an overview of the paper’s structure

The research paper introduction can vary in size and structure depending on whether your paper presents the results of original empirical research or is a review paper. Some research paper introduction examples are only half a page while others are a few pages long. In many cases, the introduction will be shorter than all of the other sections of your paper; its length depends on the size of your paper as a whole.

  • Break through writer’s block. Write your research paper introduction with Paperpal Copilot

Table of Contents

What is the introduction for a research paper, why is the introduction important in a research paper, craft a compelling introduction section with paperpal. try now, 1. introduce the research topic:, 2. determine a research niche:, 3. place your research within the research niche:, craft accurate research paper introductions with paperpal. start writing now, frequently asked questions on research paper introduction, key points to remember.

The introduction in a research paper is placed at the beginning to guide the reader from a broad subject area to the specific topic that your research addresses. They present the following information to the reader

  • Scope: The topic covered in the research paper
  • Context: Background of your topic
  • Importance: Why your research matters in that particular area of research and the industry problem that can be targeted

The research paper introduction conveys a lot of information and can be considered an essential roadmap for the rest of your paper. A good introduction for a research paper is important for the following reasons:

  • It stimulates your reader’s interest: A good introduction section can make your readers want to read your paper by capturing their interest. It informs the reader what they are going to learn and helps determine if the topic is of interest to them.
  • It helps the reader understand the research background: Without a clear introduction, your readers may feel confused and even struggle when reading your paper. A good research paper introduction will prepare them for the in-depth research to come. It provides you the opportunity to engage with the readers and demonstrate your knowledge and authority on the specific topic.
  • It explains why your research paper is worth reading: Your introduction can convey a lot of information to your readers. It introduces the topic, why the topic is important, and how you plan to proceed with your research.
  • It helps guide the reader through the rest of the paper: The research paper introduction gives the reader a sense of the nature of the information that will support your arguments and the general organization of the paragraphs that will follow. It offers an overview of what to expect when reading the main body of your paper.

What are the parts of introduction in the research?

A good research paper introduction section should comprise three main elements: 2

  • What is known: This sets the stage for your research. It informs the readers of what is known on the subject.
  • What is lacking: This is aimed at justifying the reason for carrying out your research. This could involve investigating a new concept or method or building upon previous research.
  • What you aim to do: This part briefly states the objectives of your research and its major contributions. Your detailed hypothesis will also form a part of this section.

How to write a research paper introduction?

The first step in writing the research paper introduction is to inform the reader what your topic is and why it’s interesting or important. This is generally accomplished with a strong opening statement. The second step involves establishing the kinds of research that have been done and ending with limitations or gaps in the research that you intend to address. Finally, the research paper introduction clarifies how your own research fits in and what problem it addresses. If your research involved testing hypotheses, these should be stated along with your research question. The hypothesis should be presented in the past tense since it will have been tested by the time you are writing the research paper introduction.

The following key points, with examples, can guide you when writing the research paper introduction section:

  • Highlight the importance of the research field or topic
  • Describe the background of the topic
  • Present an overview of current research on the topic

Example: The inclusion of experiential and competency-based learning has benefitted electronics engineering education. Industry partnerships provide an excellent alternative for students wanting to engage in solving real-world challenges. Industry-academia participation has grown in recent years due to the need for skilled engineers with practical training and specialized expertise. However, from the educational perspective, many activities are needed to incorporate sustainable development goals into the university curricula and consolidate learning innovation in universities.

  • Reveal a gap in existing research or oppose an existing assumption
  • Formulate the research question

Example: There have been plausible efforts to integrate educational activities in higher education electronics engineering programs. However, very few studies have considered using educational research methods for performance evaluation of competency-based higher engineering education, with a focus on technical and or transversal skills. To remedy the current need for evaluating competencies in STEM fields and providing sustainable development goals in engineering education, in this study, a comparison was drawn between study groups without and with industry partners.

  • State the purpose of your study
  • Highlight the key characteristics of your study
  • Describe important results
  • Highlight the novelty of the study.
  • Offer a brief overview of the structure of the paper.

Example: The study evaluates the main competency needed in the applied electronics course, which is a fundamental core subject for many electronics engineering undergraduate programs. We compared two groups, without and with an industrial partner, that offered real-world projects to solve during the semester. This comparison can help determine significant differences in both groups in terms of developing subject competency and achieving sustainable development goals.

Write a Research Paper Introduction in Minutes with Paperpal

Paperpal Copilot is a generative AI-powered academic writing assistant. It’s trained on millions of published scholarly articles and over 20 years of STM experience. Paperpal Copilot helps authors write better and faster with:

  • Real-time writing suggestions
  • In-depth checks for language and grammar correction
  • Paraphrasing to add variety, ensure academic tone, and trim text to meet journal limits

With Paperpal Copilot, create a research paper introduction effortlessly. In this step-by-step guide, we’ll walk you through how Paperpal transforms your initial ideas into a polished and publication-ready introduction.

guide to write introduction for research paper

How to use Paperpal to write the Introduction section

Step 1: Sign up on Paperpal and click on the Copilot feature, under this choose Outlines > Research Article > Introduction

Step 2: Add your unstructured notes or initial draft, whether in English or another language, to Paperpal, which is to be used as the base for your content.

Step 3: Fill in the specifics, such as your field of study, brief description or details you want to include, which will help the AI generate the outline for your Introduction.

Step 4: Use this outline and sentence suggestions to develop your content, adding citations where needed and modifying it to align with your specific research focus.

Step 5: Turn to Paperpal’s granular language checks to refine your content, tailor it to reflect your personal writing style, and ensure it effectively conveys your message.

You can use the same process to develop each section of your article, and finally your research paper in half the time and without any of the stress.

The purpose of the research paper introduction is to introduce the reader to the problem definition, justify the need for the study, and describe the main theme of the study. The aim is to gain the reader’s attention by providing them with necessary background information and establishing the main purpose and direction of the research.

The length of the research paper introduction can vary across journals and disciplines. While there are no strict word limits for writing the research paper introduction, an ideal length would be one page, with a maximum of 400 words over 1-4 paragraphs. Generally, it is one of the shorter sections of the paper as the reader is assumed to have at least a reasonable knowledge about the topic. 2 For example, for a study evaluating the role of building design in ensuring fire safety, there is no need to discuss definitions and nature of fire in the introduction; you could start by commenting upon the existing practices for fire safety and how your study will add to the existing knowledge and practice.

When deciding what to include in the research paper introduction, the rest of the paper should also be considered. The aim is to introduce the reader smoothly to the topic and facilitate an easy read without much dependency on external sources. 3 Below is a list of elements you can include to prepare a research paper introduction outline and follow it when you are writing the research paper introduction. Topic introduction: This can include key definitions and a brief history of the topic. Research context and background: Offer the readers some general information and then narrow it down to specific aspects. Details of the research you conducted: A brief literature review can be included to support your arguments or line of thought. Rationale for the study: This establishes the relevance of your study and establishes its importance. Importance of your research: The main contributions are highlighted to help establish the novelty of your study Research hypothesis: Introduce your research question and propose an expected outcome. Organization of the paper: Include a short paragraph of 3-4 sentences that highlights your plan for the entire paper

Cite only works that are most relevant to your topic; as a general rule, you can include one to three. Note that readers want to see evidence of original thinking. So it is better to avoid using too many references as it does not leave much room for your personal standpoint to shine through. Citations in your research paper introduction support the key points, and the number of citations depend on the subject matter and the point discussed. If the research paper introduction is too long or overflowing with citations, it is better to cite a few review articles rather than the individual articles summarized in the review. A good point to remember when citing research papers in the introduction section is to include at least one-third of the references in the introduction.

The literature review plays a significant role in the research paper introduction section. A good literature review accomplishes the following: Introduces the topic – Establishes the study’s significance – Provides an overview of the relevant literature – Provides context for the study using literature – Identifies knowledge gaps However, remember to avoid making the following mistakes when writing a research paper introduction: Do not use studies from the literature review to aggressively support your research Avoid direct quoting Do not allow literature review to be the focus of this section. Instead, the literature review should only aid in setting a foundation for the manuscript.

Remember the following key points for writing a good research paper introduction: 4

  • Avoid stuffing too much general information: Avoid including what an average reader would know and include only that information related to the problem being addressed in the research paper introduction. For example, when describing a comparative study of non-traditional methods for mechanical design optimization, information related to the traditional methods and differences between traditional and non-traditional methods would not be relevant. In this case, the introduction for the research paper should begin with the state-of-the-art non-traditional methods and methods to evaluate the efficiency of newly developed algorithms.
  • Avoid packing too many references: Cite only the required works in your research paper introduction. The other works can be included in the discussion section to strengthen your findings.
  • Avoid extensive criticism of previous studies: Avoid being overly critical of earlier studies while setting the rationale for your study. A better place for this would be the Discussion section, where you can highlight the advantages of your method.
  • Avoid describing conclusions of the study: When writing a research paper introduction remember not to include the findings of your study. The aim is to let the readers know what question is being answered. The actual answer should only be given in the Results and Discussion section.

To summarize, the research paper introduction section should be brief yet informative. It should convince the reader the need to conduct the study and motivate him to read further. If you’re feeling stuck or unsure, choose trusted AI academic writing assistants like Paperpal to effortlessly craft your research paper introduction and other sections of your research article.

1. Jawaid, S. A., & Jawaid, M. (2019). How to write introduction and discussion. Saudi Journal of Anaesthesia, 13(Suppl 1), S18.

2. Dewan, P., & Gupta, P. (2016). Writing the title, abstract and introduction: Looks matter!. Indian pediatrics, 53, 235-241.

3. Cetin, S., & Hackam, D. J. (2005). An approach to the writing of a scientific Manuscript1. Journal of Surgical Research, 128(2), 165-167.

4. Bavdekar, S. B. (2015). Writing introduction: Laying the foundations of a research paper. Journal of the Association of Physicians of India, 63(7), 44-6.

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

  • Scientific Writing Style Guides Explained
  • 5 Reasons for Rejection After Peer Review
  • Ethical Research Practices For Research with Human Subjects
  • 8 Most Effective Ways to Increase Motivation for Thesis Writing 

Practice vs. Practise: Learn the Difference

Academic paraphrasing: why paperpal’s rewrite should be your first choice , you may also like, how to write a high-quality conference paper, academic editing: how to self-edit academic text with..., measuring academic success: definition & strategies for excellence, phd qualifying exam: tips for success , ai in education: it’s time to change the..., is it ethical to use ai-generated abstracts without..., what are journal guidelines on using generative ai..., quillbot review: features, pricing, and free alternatives, what is an academic paper types and elements , should you use ai tools like chatgpt for....

How to write an effective introduction for your research paper

Last updated

20 January 2024

Reviewed by

However, the introduction is a vital element of your research paper . It helps the reader decide whether your paper is worth their time. As such, it's worth taking your time to get it right.

In this article, we'll tell you everything you need to know about writing an effective introduction for your research paper.

  • The importance of an introduction in research papers

The primary purpose of an introduction is to provide an overview of your paper. This lets readers gauge whether they want to continue reading or not. The introduction should provide a meaningful roadmap of your research to help them make this decision. It should let readers know whether the information they're interested in is likely to be found in the pages that follow.

Aside from providing readers with information about the content of your paper, the introduction also sets the tone. It shows readers the style of language they can expect, which can further help them to decide how far to read.

When you take into account both of these roles that an introduction plays, it becomes clear that crafting an engaging introduction is the best way to get your paper read more widely. First impressions count, and the introduction provides that impression to readers.

  • The optimum length for a research paper introduction

While there's no magic formula to determine exactly how long a research paper introduction should be, there are a few guidelines. Some variables that impact the ideal introduction length include:

Field of study

Complexity of the topic

Specific requirements of the course or publication

A commonly recommended length of a research paper introduction is around 10% of the total paper’s length. So, a ten-page paper has a one-page introduction. If the topic is complex, it may require more background to craft a compelling intro. Humanities papers tend to have longer introductions than those of the hard sciences.

The best way to craft an introduction of the right length is to focus on clarity and conciseness. Tell the reader only what is necessary to set up your research. An introduction edited down with this goal in mind should end up at an acceptable length.

  • Evaluating successful research paper introductions

A good way to gauge how to create a great introduction is by looking at examples from across your field. The most influential and well-regarded papers should provide some insights into what makes a good introduction.

Dissecting examples: what works and why

We can make some general assumptions by looking at common elements of a good introduction, regardless of the field of research.

A common structure is to start with a broad context, and then narrow that down to specific research questions or hypotheses. This creates a funnel that establishes the scope and relevance.

The most effective introductions are careful about the assumptions they make regarding reader knowledge. By clearly defining key terms and concepts instead of assuming the reader is familiar with them, these introductions set a more solid foundation for understanding.

To pull in the reader and make that all-important good first impression, excellent research paper introductions will often incorporate a compelling narrative or some striking fact that grabs the reader's attention.

Finally, good introductions provide clear citations from past research to back up the claims they're making. In the case of argumentative papers or essays (those that take a stance on a topic or issue), a strong thesis statement compels the reader to continue reading.

Common pitfalls to avoid in research paper introductions

You can also learn what not to do by looking at other research papers. Many authors have made mistakes you can learn from.

We've talked about the need to be clear and concise. Many introductions fail at this; they're verbose, vague, or otherwise fail to convey the research problem or hypothesis efficiently. This often comes in the form of an overemphasis on background information, which obscures the main research focus.

Ensure your introduction provides the proper emphasis and excitement around your research and its significance. Otherwise, fewer people will want to read more about it.

  • Crafting a compelling introduction for a research paper

Let’s take a look at the steps required to craft an introduction that pulls readers in and compels them to learn more about your research.

Step 1: Capturing interest and setting the scene

To capture the reader's interest immediately, begin your introduction with a compelling question, a surprising fact, a provocative quote, or some other mechanism that will hook readers and pull them further into the paper.

As they continue reading, the introduction should contextualize your research within the current field, showing readers its relevance and importance. Clarify any essential terms that will help them better understand what you're saying. This keeps the fundamentals of your research accessible to all readers from all backgrounds.

Step 2: Building a solid foundation with background information

Including background information in your introduction serves two major purposes:

It helps to clarify the topic for the reader

It establishes the depth of your research

The approach you take when conveying this information depends on the type of paper.

For argumentative papers, you'll want to develop engaging background narratives. These should provide context for the argument you'll be presenting.

For empirical papers, highlighting past research is the key. Often, there will be some questions that weren't answered in those past papers. If your paper is focused on those areas, those papers make ideal candidates for you to discuss and critique in your introduction.

Step 3: Pinpointing the research challenge

To capture the attention of the reader, you need to explain what research challenges you'll be discussing.

For argumentative papers, this involves articulating why the argument you'll be making is important. What is its relevance to current discussions or problems? What is the potential impact of people accepting or rejecting your argument?

For empirical papers, explain how your research is addressing a gap in existing knowledge. What new insights or contributions will your research bring to your field?

Step 4: Clarifying your research aims and objectives

We mentioned earlier that the introduction to a research paper can serve as a roadmap for what's within. We've also frequently discussed the need for clarity. This step addresses both of these.

When writing an argumentative paper, craft a thesis statement with impact. Clearly articulate what your position is and the main points you intend to present. This will map out for the reader exactly what they'll get from reading the rest.

For empirical papers, focus on formulating precise research questions and hypotheses. Directly link them to the gaps or issues you've identified in existing research to show the reader the precise direction your research paper will take.

Step 5: Sketching the blueprint of your study

Continue building a roadmap for your readers by designing a structured outline for the paper. Guide the reader through your research journey, explaining what the different sections will contain and their relationship to one another.

This outline should flow seamlessly as you move from section to section. Creating this outline early can also help guide the creation of the paper itself, resulting in a final product that's better organized. In doing so, you'll craft a paper where each section flows intuitively from the next.

Step 6: Integrating your research question

To avoid letting your research question get lost in background information or clarifications, craft your introduction in such a way that the research question resonates throughout. The research question should clearly address a gap in existing knowledge or offer a new perspective on an existing problem.

Tell users your research question explicitly but also remember to frequently come back to it. When providing context or clarification, point out how it relates to the research question. This keeps your focus where it needs to be and prevents the topic of the paper from becoming under-emphasized.

Step 7: Establishing the scope and limitations

So far, we've talked mostly about what's in the paper and how to convey that information to readers. The opposite is also important. Information that's outside the scope of your paper should be made clear to the reader in the introduction so their expectations for what is to follow are set appropriately.

Similarly, be honest and upfront about the limitations of the study. Any constraints in methodology, data, or how far your findings can be generalized should be fully communicated in the introduction.

Step 8: Concluding the introduction with a promise

The final few lines of the introduction are your last chance to convince people to continue reading the rest of the paper. Here is where you should make it very clear what benefit they'll get from doing so. What topics will be covered? What questions will be answered? Make it clear what they will get for continuing.

By providing a quick recap of the key points contained in the introduction in its final lines and properly setting the stage for what follows in the rest of the paper, you refocus the reader's attention on the topic of your research and guide them to read more.

  • Research paper introduction best practices

Following the steps above will give you a compelling introduction that hits on all the key points an introduction should have. Some more tips and tricks can make an introduction even more polished.

As you follow the steps above, keep the following tips in mind.

Set the right tone and style

Like every piece of writing, a research paper should be written for the audience. That is to say, it should match the tone and style that your academic discipline and target audience expect. This is typically a formal and academic tone, though the degree of formality varies by field.

Kno w the audience

The perfect introduction balances clarity with conciseness. The amount of clarification required for a given topic depends greatly on the target audience. Knowing who will be reading your paper will guide you in determining how much background information is required.

Adopt the CARS (create a research space) model

The CARS model is a helpful tool for structuring introductions. This structure has three parts. The beginning of the introduction establishes the general research area. Next, relevant literature is reviewed and critiqued. The final section outlines the purpose of your study as it relates to the previous parts.

Master the art of funneling

The CARS method is one example of a well-funneled introduction. These start broadly and then slowly narrow down to your specific research problem. It provides a nice narrative flow that provides the right information at the right time. If you stray from the CARS model, try to retain this same type of funneling.

Incorporate narrative element

People read research papers largely to be informed. But to inform the reader, you have to hold their attention. A narrative style, particularly in the introduction, is a great way to do that. This can be a compelling story, an intriguing question, or a description of a real-world problem.

Write the introduction last

By writing the introduction after the rest of the paper, you'll have a better idea of what your research entails and how the paper is structured. This prevents the common problem of writing something in the introduction and then forgetting to include it in the paper. It also means anything particularly exciting in the paper isn’t neglected in the intro.

Should you be using a customer insights hub?

Do you want to discover previous research faster?

Do you share your research findings with others?

Do you analyze research data?

Start for free today, add your research, and get to key insights faster

Editor’s picks

Last updated: 11 January 2024

Last updated: 15 January 2024

Last updated: 17 January 2024

Last updated: 12 May 2023

Last updated: 30 April 2024

Last updated: 18 May 2023

Last updated: 25 November 2023

Last updated: 13 May 2024

Latest articles

Related topics, .css-je19u9{-webkit-align-items:flex-end;-webkit-box-align:flex-end;-ms-flex-align:flex-end;align-items:flex-end;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-flex-direction:row;-ms-flex-direction:row;flex-direction:row;-webkit-box-flex-wrap:wrap;-webkit-flex-wrap:wrap;-ms-flex-wrap:wrap;flex-wrap:wrap;-webkit-box-pack:center;-ms-flex-pack:center;-webkit-justify-content:center;justify-content:center;row-gap:0;text-align:center;max-width:671px;}@media (max-width: 1079px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}}@media (max-width: 799px){.css-je19u9{max-width:400px;}.css-je19u9>span{white-space:pre;}} decide what to .css-1kiodld{max-height:56px;display:-webkit-box;display:-webkit-flex;display:-ms-flexbox;display:flex;-webkit-align-items:center;-webkit-box-align:center;-ms-flex-align:center;align-items:center;}@media (max-width: 1079px){.css-1kiodld{display:none;}} build next, decide what to build next.

guide to write introduction for research paper

Users report unexpectedly high data usage, especially during streaming sessions.

guide to write introduction for research paper

Users find it hard to navigate from the home page to relevant playlists in the app.

guide to write introduction for research paper

It would be great to have a sleep timer feature, especially for bedtime listening.

guide to write introduction for research paper

I need better filters to find the songs or artists I’m looking for.

Log in or sign up

Get started for free

  • USC Libraries
  • Research Guides

Organizing Your Social Sciences Research Paper

  • 4. The Introduction
  • Purpose of Guide
  • Design Flaws to Avoid
  • Independent and Dependent Variables
  • Glossary of Research Terms
  • Reading Research Effectively
  • Narrowing a Topic Idea
  • Broadening a Topic Idea
  • Extending the Timeliness of a Topic Idea
  • Academic Writing Style
  • Applying Critical Thinking
  • Choosing a Title
  • Making an Outline
  • Paragraph Development
  • Research Process Video Series
  • Executive Summary
  • The C.A.R.S. Model
  • Background Information
  • The Research Problem/Question
  • Theoretical Framework
  • Citation Tracking
  • Content Alert Services
  • Evaluating Sources
  • Primary Sources
  • Secondary Sources
  • Tiertiary Sources
  • Scholarly vs. Popular Publications
  • Qualitative Methods
  • Quantitative Methods
  • Insiderness
  • Using Non-Textual Elements
  • Limitations of the Study
  • Common Grammar Mistakes
  • Writing Concisely
  • Avoiding Plagiarism
  • Footnotes or Endnotes?
  • Further Readings
  • Generative AI and Writing
  • USC Libraries Tutorials and Other Guides
  • Bibliography

The introduction leads the reader from a general subject area to a particular topic of inquiry. It establishes the scope, context, and significance of the research being conducted by summarizing current understanding and background information about the topic, stating the purpose of the work in the form of the research problem supported by a hypothesis or a set of questions, explaining briefly the methodological approach used to examine the research problem, highlighting the potential outcomes your study can reveal, and outlining the remaining structure and organization of the paper.

Key Elements of the Research Proposal. Prepared under the direction of the Superintendent and by the 2010 Curriculum Design and Writing Team. Baltimore County Public Schools.

Importance of a Good Introduction

Think of the introduction as a mental road map that must answer for the reader these four questions:

  • What was I studying?
  • Why was this topic important to investigate?
  • What did we know about this topic before I did this study?
  • How will this study advance new knowledge or new ways of understanding?

According to Reyes, there are three overarching goals of a good introduction: 1) ensure that you summarize prior studies about the topic in a manner that lays a foundation for understanding the research problem; 2) explain how your study specifically addresses gaps in the literature, insufficient consideration of the topic, or other deficiency in the literature; and, 3) note the broader theoretical, empirical, and/or policy contributions and implications of your research.

A well-written introduction is important because, quite simply, you never get a second chance to make a good first impression. The opening paragraphs of your paper will provide your readers with their initial impressions about the logic of your argument, your writing style, the overall quality of your research, and, ultimately, the validity of your findings and conclusions. A vague, disorganized, or error-filled introduction will create a negative impression, whereas, a concise, engaging, and well-written introduction will lead your readers to think highly of your analytical skills, your writing style, and your research approach. All introductions should conclude with a brief paragraph that describes the organization of the rest of the paper.

Hirano, Eliana. “Research Article Introductions in English for Specific Purposes: A Comparison between Brazilian, Portuguese, and English.” English for Specific Purposes 28 (October 2009): 240-250; Samraj, B. “Introductions in Research Articles: Variations Across Disciplines.” English for Specific Purposes 21 (2002): 1–17; Introductions. The Writing Center. University of North Carolina; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide. Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70; Reyes, Victoria. Demystifying the Journal Article. Inside Higher Education.

Structure and Writing Style

I.  Structure and Approach

The introduction is the broad beginning of the paper that answers three important questions for the reader:

  • What is this?
  • Why should I read it?
  • What do you want me to think about / consider doing / react to?

Think of the structure of the introduction as an inverted triangle of information that lays a foundation for understanding the research problem. Organize the information so as to present the more general aspects of the topic early in the introduction, then narrow your analysis to more specific topical information that provides context, finally arriving at your research problem and the rationale for studying it [often written as a series of key questions to be addressed or framed as a hypothesis or set of assumptions to be tested] and, whenever possible, a description of the potential outcomes your study can reveal.

These are general phases associated with writing an introduction: 1.  Establish an area to research by:

  • Highlighting the importance of the topic, and/or
  • Making general statements about the topic, and/or
  • Presenting an overview on current research on the subject.

2.  Identify a research niche by:

  • Opposing an existing assumption, and/or
  • Revealing a gap in existing research, and/or
  • Formulating a research question or problem, and/or
  • Continuing a disciplinary tradition.

3.  Place your research within the research niche by:

  • Stating the intent of your study,
  • Outlining the key characteristics of your study,
  • Describing important results, and
  • Giving a brief overview of the structure of the paper.

NOTE:   It is often useful to review the introduction late in the writing process. This is appropriate because outcomes are unknown until you've completed the study. After you complete writing the body of the paper, go back and review introductory descriptions of the structure of the paper, the method of data gathering, the reporting and analysis of results, and the conclusion. Reviewing and, if necessary, rewriting the introduction ensures that it correctly matches the overall structure of your final paper.

II.  Delimitations of the Study

Delimitations refer to those characteristics that limit the scope and define the conceptual boundaries of your research . This is determined by the conscious exclusionary and inclusionary decisions you make about how to investigate the research problem. In other words, not only should you tell the reader what it is you are studying and why, but you must also acknowledge why you rejected alternative approaches that could have been used to examine the topic.

Obviously, the first limiting step was the choice of research problem itself. However, implicit are other, related problems that could have been chosen but were rejected. These should be noted in the conclusion of your introduction. For example, a delimitating statement could read, "Although many factors can be understood to impact the likelihood young people will vote, this study will focus on socioeconomic factors related to the need to work full-time while in school." The point is not to document every possible delimiting factor, but to highlight why previously researched issues related to the topic were not addressed.

Examples of delimitating choices would be:

  • The key aims and objectives of your study,
  • The research questions that you address,
  • The variables of interest [i.e., the various factors and features of the phenomenon being studied],
  • The method(s) of investigation,
  • The time period your study covers, and
  • Any relevant alternative theoretical frameworks that could have been adopted.

Review each of these decisions. Not only do you clearly establish what you intend to accomplish in your research, but you should also include a declaration of what the study does not intend to cover. In the latter case, your exclusionary decisions should be based upon criteria understood as, "not interesting"; "not directly relevant"; “too problematic because..."; "not feasible," and the like. Make this reasoning explicit!

NOTE:   Delimitations refer to the initial choices made about the broader, overall design of your study and should not be confused with documenting the limitations of your study discovered after the research has been completed.

ANOTHER NOTE : Do not view delimitating statements as admitting to an inherent failing or shortcoming in your research. They are an accepted element of academic writing intended to keep the reader focused on the research problem by explicitly defining the conceptual boundaries and scope of your study. It addresses any critical questions in the reader's mind of, "Why the hell didn't the author examine this?"

III.  The Narrative Flow

Issues to keep in mind that will help the narrative flow in your introduction :

  • Your introduction should clearly identify the subject area of interest . A simple strategy to follow is to use key words from your title in the first few sentences of the introduction. This will help focus the introduction on the topic at the appropriate level and ensures that you get to the subject matter quickly without losing focus, or discussing information that is too general.
  • Establish context by providing a brief and balanced review of the pertinent published literature that is available on the subject. The key is to summarize for the reader what is known about the specific research problem before you did your analysis. This part of your introduction should not represent a comprehensive literature review--that comes next. It consists of a general review of the important, foundational research literature [with citations] that establishes a foundation for understanding key elements of the research problem. See the drop-down menu under this tab for " Background Information " regarding types of contexts.
  • Clearly state the hypothesis that you investigated . When you are first learning to write in this format it is okay, and actually preferable, to use a past statement like, "The purpose of this study was to...." or "We investigated three possible mechanisms to explain the...."
  • Why did you choose this kind of research study or design? Provide a clear statement of the rationale for your approach to the problem studied. This will usually follow your statement of purpose in the last paragraph of the introduction.

IV.  Engaging the Reader

A research problem in the social sciences can come across as dry and uninteresting to anyone unfamiliar with the topic . Therefore, one of the goals of your introduction is to make readers want to read your paper. Here are several strategies you can use to grab the reader's attention:

  • Open with a compelling story . Almost all research problems in the social sciences, no matter how obscure or esoteric , are really about the lives of people. Telling a story that humanizes an issue can help illuminate the significance of the problem and help the reader empathize with those affected by the condition being studied.
  • Include a strong quotation or a vivid, perhaps unexpected, anecdote . During your review of the literature, make note of any quotes or anecdotes that grab your attention because they can used in your introduction to highlight the research problem in a captivating way.
  • Pose a provocative or thought-provoking question . Your research problem should be framed by a set of questions to be addressed or hypotheses to be tested. However, a provocative question can be presented in the beginning of your introduction that challenges an existing assumption or compels the reader to consider an alternative viewpoint that helps establish the significance of your study. 
  • Describe a puzzling scenario or incongruity . This involves highlighting an interesting quandary concerning the research problem or describing contradictory findings from prior studies about a topic. Posing what is essentially an unresolved intellectual riddle about the problem can engage the reader's interest in the study.
  • Cite a stirring example or case study that illustrates why the research problem is important . Draw upon the findings of others to demonstrate the significance of the problem and to describe how your study builds upon or offers alternatives ways of investigating this prior research.

NOTE:   It is important that you choose only one of the suggested strategies for engaging your readers. This avoids giving an impression that your paper is more flash than substance and does not distract from the substance of your study.

Freedman, Leora  and Jerry Plotnick. Introductions and Conclusions. University College Writing Centre. University of Toronto; Introduction. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper. Department of Biology. Bates College; Introductions. The Writing Center. University of North Carolina; Introductions. The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Introductions, Body Paragraphs, and Conclusions for an Argument Paper. The Writing Lab and The OWL. Purdue University; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide . Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70; Resources for Writers: Introduction Strategies. Program in Writing and Humanistic Studies. Massachusetts Institute of Technology; Sharpling, Gerald. Writing an Introduction. Centre for Applied Linguistics, University of Warwick; Samraj, B. “Introductions in Research Articles: Variations Across Disciplines.” English for Specific Purposes 21 (2002): 1–17; Swales, John and Christine B. Feak. Academic Writing for Graduate Students: Essential Skills and Tasks . 2nd edition. Ann Arbor, MI: University of Michigan Press, 2004 ; Writing Your Introduction. Department of English Writing Guide. George Mason University.

Writing Tip

Avoid the "Dictionary" Introduction

Giving the dictionary definition of words related to the research problem may appear appropriate because it is important to define specific terminology that readers may be unfamiliar with. However, anyone can look a word up in the dictionary and a general dictionary is not a particularly authoritative source because it doesn't take into account the context of your topic and doesn't offer particularly detailed information. Also, placed in the context of a particular discipline, a term or concept may have a different meaning than what is found in a general dictionary. If you feel that you must seek out an authoritative definition, use a subject specific dictionary or encyclopedia [e.g., if you are a sociology student, search for dictionaries of sociology]. A good database for obtaining definitive definitions of concepts or terms is Credo Reference .

Saba, Robert. The College Research Paper. Florida International University; Introductions. The Writing Center. University of North Carolina.

Another Writing Tip

When Do I Begin?

A common question asked at the start of any paper is, "Where should I begin?" An equally important question to ask yourself is, "When do I begin?" Research problems in the social sciences rarely rest in isolation from history. Therefore, it is important to lay a foundation for understanding the historical context underpinning the research problem. However, this information should be brief and succinct and begin at a point in time that illustrates the study's overall importance. For example, a study that investigates coffee cultivation and export in West Africa as a key stimulus for local economic growth needs to describe the beginning of exporting coffee in the region and establishing why economic growth is important. You do not need to give a long historical explanation about coffee exports in Africa. If a research problem requires a substantial exploration of the historical context, do this in the literature review section. In your introduction, make note of this as part of the "roadmap" [see below] that you use to describe the organization of your paper.

Introductions. The Writing Center. University of North Carolina; “Writing Introductions.” In Good Essay Writing: A Social Sciences Guide . Peter Redman. 4th edition. (London: Sage, 2011), pp. 63-70.

Yet Another Writing Tip

Always End with a Roadmap

The final paragraph or sentences of your introduction should forecast your main arguments and conclusions and provide a brief description of the rest of the paper [the "roadmap"] that let's the reader know where you are going and what to expect. A roadmap is important because it helps the reader place the research problem within the context of their own perspectives about the topic. In addition, concluding your introduction with an explicit roadmap tells the reader that you have a clear understanding of the structural purpose of your paper. In this way, the roadmap acts as a type of promise to yourself and to your readers that you will follow a consistent and coherent approach to addressing the topic of inquiry. Refer to it often to help keep your writing focused and organized.

Cassuto, Leonard. “On the Dissertation: How to Write the Introduction.” The Chronicle of Higher Education , May 28, 2018; Radich, Michael. A Student's Guide to Writing in East Asian Studies . (Cambridge, MA: Harvard University Writing n. d.), pp. 35-37.

  • << Previous: Executive Summary
  • Next: The C.A.R.S. Model >>
  • Last Updated: May 15, 2024 9:53 AM
  • URL: https://libguides.usc.edu/writingguide

The Writing Center • University of North Carolina at Chapel Hill

Introductions

What this handout is about.

This handout will explain the functions of introductions, offer strategies for creating effective introductions, and provide some examples of less effective introductions to avoid.

The role of introductions

Introductions and conclusions can be the most difficult parts of papers to write. Usually when you sit down to respond to an assignment, you have at least some sense of what you want to say in the body of your paper. You might have chosen a few examples you want to use or have an idea that will help you answer the main question of your assignment; these sections, therefore, may not be as hard to write. And it’s fine to write them first! But in your final draft, these middle parts of the paper can’t just come out of thin air; they need to be introduced and concluded in a way that makes sense to your reader.

Your introduction and conclusion act as bridges that transport your readers from their own lives into the “place” of your analysis. If your readers pick up your paper about education in the autobiography of Frederick Douglass, for example, they need a transition to help them leave behind the world of Chapel Hill, television, e-mail, and The Daily Tar Heel and to help them temporarily enter the world of nineteenth-century American slavery. By providing an introduction that helps your readers make a transition between their own world and the issues you will be writing about, you give your readers the tools they need to get into your topic and care about what you are saying. Similarly, once you’ve hooked your readers with the introduction and offered evidence to prove your thesis, your conclusion can provide a bridge to help your readers make the transition back to their daily lives. (See our handout on conclusions .)

Note that what constitutes a good introduction may vary widely based on the kind of paper you are writing and the academic discipline in which you are writing it. If you are uncertain what kind of introduction is expected, ask your instructor.

Why bother writing a good introduction?

You never get a second chance to make a first impression. The opening paragraph of your paper will provide your readers with their initial impressions of your argument, your writing style, and the overall quality of your work. A vague, disorganized, error-filled, off-the-wall, or boring introduction will probably create a negative impression. On the other hand, a concise, engaging, and well-written introduction will start your readers off thinking highly of you, your analytical skills, your writing, and your paper.

Your introduction is an important road map for the rest of your paper. Your introduction conveys a lot of information to your readers. You can let them know what your topic is, why it is important, and how you plan to proceed with your discussion. In many academic disciplines, your introduction should contain a thesis that will assert your main argument. Your introduction should also give the reader a sense of the kinds of information you will use to make that argument and the general organization of the paragraphs and pages that will follow. After reading your introduction, your readers should not have any major surprises in store when they read the main body of your paper.

Ideally, your introduction will make your readers want to read your paper. The introduction should capture your readers’ interest, making them want to read the rest of your paper. Opening with a compelling story, an interesting question, or a vivid example can get your readers to see why your topic matters and serve as an invitation for them to join you for an engaging intellectual conversation (remember, though, that these strategies may not be suitable for all papers and disciplines).

Strategies for writing an effective introduction

Start by thinking about the question (or questions) you are trying to answer. Your entire essay will be a response to this question, and your introduction is the first step toward that end. Your direct answer to the assigned question will be your thesis, and your thesis will likely be included in your introduction, so it is a good idea to use the question as a jumping off point. Imagine that you are assigned the following question:

Drawing on the Narrative of the Life of Frederick Douglass , discuss the relationship between education and slavery in 19th-century America. Consider the following: How did white control of education reinforce slavery? How did Douglass and other enslaved African Americans view education while they endured slavery? And what role did education play in the acquisition of freedom? Most importantly, consider the degree to which education was or was not a major force for social change with regard to slavery.

You will probably refer back to your assignment extensively as you prepare your complete essay, and the prompt itself can also give you some clues about how to approach the introduction. Notice that it starts with a broad statement and then narrows to focus on specific questions from the book. One strategy might be to use a similar model in your own introduction—start off with a big picture sentence or two and then focus in on the details of your argument about Douglass. Of course, a different approach could also be very successful, but looking at the way the professor set up the question can sometimes give you some ideas for how you might answer it. (See our handout on understanding assignments for additional information on the hidden clues in assignments.)

Decide how general or broad your opening should be. Keep in mind that even a “big picture” opening needs to be clearly related to your topic; an opening sentence that said “Human beings, more than any other creatures on earth, are capable of learning” would be too broad for our sample assignment about slavery and education. If you have ever used Google Maps or similar programs, that experience can provide a helpful way of thinking about how broad your opening should be. Imagine that you’re researching Chapel Hill. If what you want to find out is whether Chapel Hill is at roughly the same latitude as Rome, it might make sense to hit that little “minus” sign on the online map until it has zoomed all the way out and you can see the whole globe. If you’re trying to figure out how to get from Chapel Hill to Wrightsville Beach, it might make more sense to zoom in to the level where you can see most of North Carolina (but not the rest of the world, or even the rest of the United States). And if you are looking for the intersection of Ridge Road and Manning Drive so that you can find the Writing Center’s main office, you may need to zoom all the way in. The question you are asking determines how “broad” your view should be. In the sample assignment above, the questions are probably at the “state” or “city” level of generality. When writing, you need to place your ideas in context—but that context doesn’t generally have to be as big as the whole galaxy!

Try writing your introduction last. You may think that you have to write your introduction first, but that isn’t necessarily true, and it isn’t always the most effective way to craft a good introduction. You may find that you don’t know precisely what you are going to argue at the beginning of the writing process. It is perfectly fine to start out thinking that you want to argue a particular point but wind up arguing something slightly or even dramatically different by the time you’ve written most of the paper. The writing process can be an important way to organize your ideas, think through complicated issues, refine your thoughts, and develop a sophisticated argument. However, an introduction written at the beginning of that discovery process will not necessarily reflect what you wind up with at the end. You will need to revise your paper to make sure that the introduction, all of the evidence, and the conclusion reflect the argument you intend. Sometimes it’s easiest to just write up all of your evidence first and then write the introduction last—that way you can be sure that the introduction will match the body of the paper.

Don’t be afraid to write a tentative introduction first and then change it later. Some people find that they need to write some kind of introduction in order to get the writing process started. That’s fine, but if you are one of those people, be sure to return to your initial introduction later and rewrite if necessary.

Open with something that will draw readers in. Consider these options (remembering that they may not be suitable for all kinds of papers):

  • an intriguing example —for example, Douglass writes about a mistress who initially teaches him but then ceases her instruction as she learns more about slavery.
  • a provocative quotation that is closely related to your argument —for example, Douglass writes that “education and slavery were incompatible with each other.” (Quotes from famous people, inspirational quotes, etc. may not work well for an academic paper; in this example, the quote is from the author himself.)
  • a puzzling scenario —for example, Frederick Douglass says of slaves that “[N]othing has been left undone to cripple their intellects, darken their minds, debase their moral nature, obliterate all traces of their relationship to mankind; and yet how wonderfully they have sustained the mighty load of a most frightful bondage, under which they have been groaning for centuries!” Douglass clearly asserts that slave owners went to great lengths to destroy the mental capacities of slaves, yet his own life story proves that these efforts could be unsuccessful.
  • a vivid and perhaps unexpected anecdote —for example, “Learning about slavery in the American history course at Frederick Douglass High School, students studied the work slaves did, the impact of slavery on their families, and the rules that governed their lives. We didn’t discuss education, however, until one student, Mary, raised her hand and asked, ‘But when did they go to school?’ That modern high school students could not conceive of an American childhood devoid of formal education speaks volumes about the centrality of education to American youth today and also suggests the significance of the deprivation of education in past generations.”
  • a thought-provoking question —for example, given all of the freedoms that were denied enslaved individuals in the American South, why does Frederick Douglass focus his attentions so squarely on education and literacy?

Pay special attention to your first sentence. Start off on the right foot with your readers by making sure that the first sentence actually says something useful and that it does so in an interesting and polished way.

How to evaluate your introduction draft

Ask a friend to read your introduction and then tell you what they expect the paper will discuss, what kinds of evidence the paper will use, and what the tone of the paper will be. If your friend is able to predict the rest of your paper accurately, you probably have a good introduction.

Five kinds of less effective introductions

1. The placeholder introduction. When you don’t have much to say on a given topic, it is easy to create this kind of introduction. Essentially, this kind of weaker introduction contains several sentences that are vague and don’t really say much. They exist just to take up the “introduction space” in your paper. If you had something more effective to say, you would probably say it, but in the meantime this paragraph is just a place holder.

Example: Slavery was one of the greatest tragedies in American history. There were many different aspects of slavery. Each created different kinds of problems for enslaved people.

2. The restated question introduction. Restating the question can sometimes be an effective strategy, but it can be easy to stop at JUST restating the question instead of offering a more specific, interesting introduction to your paper. The professor or teaching assistant wrote your question and will be reading many essays in response to it—they do not need to read a whole paragraph that simply restates the question.

Example: The Narrative of the Life of Frederick Douglass discusses the relationship between education and slavery in 19th century America, showing how white control of education reinforced slavery and how Douglass and other enslaved African Americans viewed education while they endured. Moreover, the book discusses the role that education played in the acquisition of freedom. Education was a major force for social change with regard to slavery.

3. The Webster’s Dictionary introduction. This introduction begins by giving the dictionary definition of one or more of the words in the assigned question. Anyone can look a word up in the dictionary and copy down what Webster says. If you want to open with a discussion of an important term, it may be far more interesting for you (and your reader) if you develop your own definition of the term in the specific context of your class and assignment. You may also be able to use a definition from one of the sources you’ve been reading for class. Also recognize that the dictionary is also not a particularly authoritative work—it doesn’t take into account the context of your course and doesn’t offer particularly detailed information. If you feel that you must seek out an authority, try to find one that is very relevant and specific. Perhaps a quotation from a source reading might prove better? Dictionary introductions are also ineffective simply because they are so overused. Instructors may see a great many papers that begin in this way, greatly decreasing the dramatic impact that any one of those papers will have.

Example: Webster’s dictionary defines slavery as “the state of being a slave,” as “the practice of owning slaves,” and as “a condition of hard work and subjection.”

4. The “dawn of man” introduction. This kind of introduction generally makes broad, sweeping statements about the relevance of this topic since the beginning of time, throughout the world, etc. It is usually very general (similar to the placeholder introduction) and fails to connect to the thesis. It may employ cliches—the phrases “the dawn of man” and “throughout human history” are examples, and it’s hard to imagine a time when starting with one of these would work. Instructors often find them extremely annoying.

Example: Since the dawn of man, slavery has been a problem in human history.

5. The book report introduction. This introduction is what you had to do for your elementary school book reports. It gives the name and author of the book you are writing about, tells what the book is about, and offers other basic facts about the book. You might resort to this sort of introduction when you are trying to fill space because it’s a familiar, comfortable format. It is ineffective because it offers details that your reader probably already knows and that are irrelevant to the thesis.

Example: Frederick Douglass wrote his autobiography, Narrative of the Life of Frederick Douglass, An American Slave , in the 1840s. It was published in 1986 by Penguin Books. In it, he tells the story of his life.

And now for the conclusion…

Writing an effective introduction can be tough. Try playing around with several different options and choose the one that ends up sounding best to you!

Just as your introduction helps readers make the transition to your topic, your conclusion needs to help them return to their daily lives–but with a lasting sense of how what they have just read is useful or meaningful. Check out our handout on  conclusions for tips on ending your paper as effectively as you began it!

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Douglass, Frederick. 1995. Narrative of the Life of Frederick Douglass, an American Slave, Written by Himself . New York: Dover.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

How to Write an Introduction for a Research Paper

Academic Writing Service

How to write an introduction for a research paper? Eventually (and with practice) all writers will develop their own strategy for writing the perfect introduction for a research paper. Once you are comfortable with writing, you will probably find your own, but coming up with a good strategy can be tough for beginning writers.

The Purpose of an Introduction

Your opening paragraphs, phrases for introducing thesis statements, research paper introduction examples, using the introduction to map out your research paper.

How to Write an Introduction for a Research Paper

Academic Writing, Editing, Proofreading, And Problem Solving Services

Get 10% off with 24start discount code.

  • First write your thesis.Your thesis should state the main idea in specific terms.
  • After you have a working thesis, tackle the body of your paper before you write the rest of the introduction. Each paragraph in the body should explore one specific topic that proves, or summarizes your thesis. Writing is a thinking process. Once you have worked your way through that process by writing the body of the paper, you will have an intimate understanding of how you are supporting your thesis. After you have written the body paragraphs, go back and rewrite your thesis to make it more specific and to connect it to the topics you addressed in the body paragraph.
  • Revise your introduction several times, saving each revision. Be sure your introduction previews the topics you are presenting in your paper. One way of doing this is to use keywords from the topic sentences in each paragraph to introduce, or preview, the topics in your introduction.This “preview” will give your reader a context for understanding how you will make your case.
  • Experiment by taking different approaches to your thesis with every revision you make. Play with the language in the introduction. Strike a new tone. Go back and compare versions. Then pick the one that works most effectively with the body of your research paper.
  • Do not try to pack everything you want to say into your introduction. Just as your introduction should not be too short, it should also not be too long. Your introduction should be about the same length as any other paragraph in your research paper. Let the content—what you have to say—dictate the length.

The first page of your research paper should draw the reader into the text. It is the paper’s most important page and, alas, often the worst written. There are two culprits here and effective ways to cope with both of them.

First, the writer is usually straining too hard to say something terribly BIG and IMPORTANT about the thesis topic. The goal is worthy, but the aim is unrealistically high. The result is often a muddle of vague platitudes rather than a crisp, compelling introduction to the thesis. Want a familiar example? Listen to most graduation speakers. Their goal couldn’t be loftier: to say what education means and to tell an entire football stadium how to live the rest of their lives. The results are usually an avalanche of clichés and sodden prose.

The second culprit is bad timing. The opening and concluding paragraphs are usually written late in the game, after the rest of the thesis is finished and polished. There’s nothing wrong with writing these sections last. It’s usually the right approach since you need to know exactly what you are saying in the substantive middle sections of the thesis before you can introduce them effectively or draw together your findings. But having waited to write the opening and closing sections, you need to review and edit them several times to catch up. Otherwise, you’ll putting the most jagged prose in the most tender spots. Edit and polish your opening paragraphs with extra care. They should draw readers into the paper.

After you’ve done some extra polishing, I suggest a simple test for the introductory section. As an experiment, chop off the first few paragraphs. Let the paper begin on, say, paragraph 2 or even page 2. If you don’t lose much, or actually gain in clarity and pace, then you’ve got a problem.

There are two solutions. One is to start at this new spot, further into the text. After all, that’s where you finally gain traction on your subject. That works best in some cases, and we occasionally suggest it. The alternative, of course, is to write a new opening that doesn’t flop around, saying nothing.

What makes a good opening? Actually, they come in several flavors. One is an intriguing story about your topic. Another is a brief, compelling quote. When you run across them during your reading, set them aside for later use. Don’t be deterred from using them because they “don’t seem academic enough.” They’re fine as long as the rest of the paper doesn’t sound like you did your research in People magazine. The third, and most common, way to begin is by stating your main questions, followed by a brief comment about why they matter.

Whichever opening you choose, it should engage your readers and coax them to continue. Having done that, you should give them a general overview of the project—the main issues you will cover, the material you will use, and your thesis statement (that is, your basic approach to the topic). Finally, at the end of the introductory section, give your readers a brief road map, showing how the paper will unfold. How you do that depends on your topic but here are some general suggestions for phrase choice that may help:

  • This analysis will provide …
  • This paper analyzes the relationship between …
  • This paper presents an analysis of …
  • This paper will argue that …
  • This topic supports the argument that…
  • Research supports the opinion that …
  • This paper supports the opinion that …
  • An interpretation of the facts indicates …
  • The results of this experiment show …
  • The results of this research show …

Comparisons/Contrasts

  • A comparison will show that …
  • By contrasting the results,we see that …
  • This paper examines the advantages and disadvantages of …

Definitions/Classifications

  • This paper will provide a guide for categorizing the following:…
  • This paper provides a definition of …
  • This paper explores the meaning of …
  • This paper will discuss the implications of …
  • A discussion of this topic reveals …
  • The following discussion will focus on …

Description

  • This report describes…
  • This report will illustrate…
  • This paper provides an illustration of …

Process/Experimentation

  • This paper will identify the reasons behind…
  • The results of the experiment show …
  • The process revealed that …
  • This paper theorizes…
  • This paper presents the theory that …
  • In theory, this indicates that …

Quotes, anecdotes, questions, examples, and broad statements—all of them can used successfully to write an introduction for a research paper. It’s instructive to see them in action, in the hands of skilled academic writers.

Let’s begin with David M. Kennedy’s superb history, Freedom from Fear: The American People in Depression and War, 1929–1945 . Kennedy begins each chapter with a quote, followed by his text. The quote above chapter 1 shows President Hoover speaking in 1928 about America’s golden future. The text below it begins with the stock market collapse of 1929. It is a riveting account of just how wrong Hoover was. The text about the Depression is stronger because it contrasts so starkly with the optimistic quotation.

“We in America today are nearer the final triumph over poverty than ever before in the history of any land.”—Herbert Hoover, August 11, 1928 Like an earthquake, the stock market crash of October 1929 cracked startlingly across the United States, the herald of a crisis that was to shake the American way of life to its foundations. The events of the ensuing decade opened a fissure across the landscape of American history no less gaping than that opened by the volley on Lexington Common in April 1775 or by the bombardment of Sumter on another April four score and six years later. The ratcheting ticker machines in the autumn of 1929 did not merely record avalanching stock prices. In time they came also to symbolize the end of an era. (David M. Kennedy, Freedom from Fear: The American People in Depression and War, 1929–1945 . New York: Oxford University Press, 1999, p. 10)

Kennedy has exciting, wrenching material to work with. John Mueller faces the exact opposite problem. In Retreat from Doomsday: The Obsolescence of Major War , he is trying to explain why Great Powers have suddenly stopped fighting each other. For centuries they made war on each other with devastating regularity, killing millions in the process. But now, Mueller thinks, they have not just paused; they have stopped permanently. He is literally trying to explain why “nothing is happening now.” That may be an exciting topic intellectually, it may have great practical significance, but “nothing happened” is not a very promising subject for an exciting opening paragraph. Mueller manages to make it exciting and, at the same time, shows why it matters so much. Here’s his opening, aptly entitled “History’s Greatest Nonevent”:

On May 15, 1984, the major countries of the developed world had managed to remain at peace with each other for the longest continuous stretch of time since the days of the Roman Empire. If a significant battle in a war had been fought on that day, the press would have bristled with it. As usual, however, a landmark crossing in the history of peace caused no stir: the most prominent story in the New York Times that day concerned the saga of a manicurist, a machinist, and a cleaning woman who had just won a big Lotto contest. This book seeks to develop an explanation for what is probably the greatest nonevent in human history. (John Mueller, Retreat from Doomsday: The Obsolescence of Major War . New York: Basic Books, 1989, p. 3)

In the space of a few sentences, Mueller sets up his puzzle and reveals its profound human significance. At the same time, he shows just how easy it is to miss this milestone in the buzz of daily events. Notice how concretely he does that. He doesn’t just say that the New York Times ignored this record setting peace. He offers telling details about what they covered instead: “a manicurist, a machinist, and a cleaning woman who had just won a big Lotto contest.” Likewise, David Kennedy immediately entangles us in concrete events: the stunning stock market crash of 1929. These are powerful openings that capture readers’ interests, establish puzzles, and launch narratives.

Sociologist James Coleman begins in a completely different way, by posing the basic questions he will study. His ambitious book, Foundations of Social Theory , develops a comprehensive theory of social life, so it is entirely appropriate for him to begin with some major questions. But he could just as easily have begun with a compelling story or anecdote. He includes many of them elsewhere in his book. His choice for the opening, though, is to state his major themes plainly and frame them as a paradox. Sociologists, he says, are interested in aggregate behavior—how people act in groups, organizations, or large numbers—yet they mostly examine individuals:

A central problem in social science is that of accounting for the function of some kind of social system. Yet in most social research, observations are not made on the system as a whole, but on some part of it. In fact, the natural unit of observation is the individual person…  This has led to a widening gap between theory and research… (James S. Coleman, Foundations of Social Theory . Cambridge, MA: Harvard University Press, 1990, pp. 1–2)

After expanding on this point, Coleman explains that he will not try to remedy the problem by looking solely at groups or aggregate-level data. That’s a false solution, he says, because aggregates don’t act; individuals do. So the real problem is to show the links between individual actions and aggregate outcomes, between the micro and the macro.

The major problem for explanations of system behavior based on actions and orientations at a level below that of the system [in this case, on individual-level actions] is that of moving from the lower level to the system level. This has been called the micro-to-macro problem, and it is pervasive throughout the social sciences. (Coleman, Foundations of Social Theory , p. 6)

Explaining how to deal with this “micro-to-macro problem” is the central issue of Coleman’s book, and he announces it at the beginning.

Coleman’s theory-driven opening stands at the opposite end of the spectrum from engaging stories or anecdotes, which are designed to lure the reader into the narrative and ease the path to a more analytic treatment later in the text. Take, for example, the opening sentences of Robert L. Herbert’s sweeping study Impressionism: Art, Leisure, and Parisian Society : “When Henry Tuckerman came to Paris in 1867, one of the thousands of Americans attracted there by the huge international exposition, he was bowled over by the extraordinary changes since his previous visit twenty years before.” (Robert L. Herbert, Impressionism: Art, Leisure, and Parisian Society . New Haven, CT: Yale University Press, 1988, p. 1.) Herbert fills in the evocative details to set the stage for his analysis of the emerging Impressionist art movement and its connection to Parisian society and leisure in this period.

David Bromwich writes about Wordsworth, a poet so familiar to students of English literature that it is hard to see him afresh, before his great achievements, when he was just a young outsider starting to write. To draw us into Wordsworth’s early work, Bromwich wants us to set aside our entrenched images of the famous mature poet and see him as he was in the 1790s, as a beginning writer on the margins of society. He accomplishes this ambitious task in the opening sentences of Disowned by Memory: Wordsworth’s Poetry of the 1790s :

Wordsworth turned to poetry after the revolution to remind himself that he was still a human being. It was a curious solution, to a difficulty many would not have felt. The whole interest of his predicament is that he did feel it. Yet Wordsworth is now so established an eminence—his name so firmly fixed with readers as a moralist of self-trust emanating from complete self-security—that it may seem perverse to imagine him as a criminal seeking expiation. Still, that is a picture we get from The Borderers and, at a longer distance, from “Tintern Abbey.” (David Bromwich, Disowned by Memory: Wordsworth’s Poetry of the 1790s . Chicago: University of Chicago Press, 1998, p. 1)

That’s a wonderful opening! Look at how much Bromwich accomplishes in just a few words. He not only prepares the way for analyzing Wordsworth’s early poetry; he juxtaposes the anguished young man who wrote it to the self-confident, distinguished figure he became—the eminent man we can’t help remembering as we read his early poetry.

Let us highlight a couple of other points in this passage because they illustrate some intelligent writing choices. First, look at the odd comma in this sentence: “It was a curious solution, to a difficulty many would not have felt.” Any standard grammar book would say that comma is wrong and should be omitted. Why did Bromwich insert it? Because he’s a fine writer, thinking of his sentence rhythm and the point he wants to make. The comma does exactly what it should. It makes us pause, breaking the sentence into two parts, each with an interesting point. One is that Wordsworth felt a difficulty others would not have; the other is that he solved it in a distinctive way. It would be easy for readers to glide over this double message, so Bromwich has inserted a speed bump to slow us down. Most of the time, you should follow grammatical rules, like those about commas, but you should bend them when it serves a good purpose. That’s what the writer does here.

The second small point is the phrase “after the revolution” in the first sentence: “Wordsworth turned to poetry after the revolution to remind himself that he was still a human being.” Why doesn’t Bromwich say “after the French Revolution”? Because he has judged his book’s audience. He is writing for specialists who already know which revolution is reverberating through English life in the 1790s. It is the French Revolution, not the earlier loss of the American colonies. If Bromwich were writing for a much broader audience—say, the New York Times Book Review—he would probably insert the extra word to avoid confusion.

The message “Know your audience” applies to all writers. Don’t talk down to them by assuming they can’t get dressed in the morning. Don’t strut around showing off your book learnin’ by tossing in arcane facts and esoteric language for its own sake. Neither will win over readers.

Bromwich, Herbert, and Coleman open their works in different ways, but their choices work well for their different texts. Your task is to decide what kind of opening will work best for yours. Don’t let that happen by default, by grabbing the first idea you happen upon. Consider a couple of different ways of opening your thesis and then choose the one you prefer. Give yourself some options, think them over, then make an informed choice.

Whether you begin with a story, puzzle, or broad statement, the next part of the introduction should pose your main questions and establish your argument. This is your thesis statement—your viewpoint along with the supporting reasons and evidence. It should be articulated plainly so readers understand full well what your paper is about and what it will argue.

After that, give your readers a road map of what’s to come. That’s normally done at the end of the introductory section (or, in a book, at the end of the introductory chapter). Here’s John J. Mearsheimer presenting such a road map in The Tragedy of Great Power Politics . He not only tells us the order of upcoming chapters, he explains why he’s chosen that order and which chapters are most important:

The Plan of the Book The rest of the chapters in this book are concerned mainly with answering the six big questions about power which I identified earlier. Chapter 2, which is probably the most important chapter in the book, lays out my theory of why states compete for power and why they pursue hegemony. In Chapters 3 and 4, I define power and explain how to measure it. I do this in order to lay the groundwork for testing my theory… (John J. Mearsheimer, The Tragedy of Great Power Politics . New York: W. W. Norton, 2001, p. 27)

As this excerpt makes clear, Mearsheimer has already laid out his “six big questions” in the introduction. Now he’s showing us the path ahead, the path to answering those questions.

At the end of the introduction, give your readers a road map of what’s to come. Tell them what the upcoming sections will be and why they are arranged in this particular order.

After having written your introduction it’s time to move to the biggest part: body of a research paper.

Back to How To Write A Research Paper .

ORDER HIGH QUALITY CUSTOM PAPER

guide to write introduction for research paper

Grad Coach

How To Write A Research Paper

Step-By-Step Tutorial With Examples + FREE Template

By: Derek Jansen (MBA) | Expert Reviewer: Dr Eunice Rautenbach | March 2024

For many students, crafting a strong research paper from scratch can feel like a daunting task – and rightly so! In this post, we’ll unpack what a research paper is, what it needs to do , and how to write one – in three easy steps. 🙂 

Overview: Writing A Research Paper

What (exactly) is a research paper.

  • How to write a research paper
  • Stage 1 : Topic & literature search
  • Stage 2 : Structure & outline
  • Stage 3 : Iterative writing
  • Key takeaways

Let’s start by asking the most important question, “ What is a research paper? ”.

Simply put, a research paper is a scholarly written work where the writer (that’s you!) answers a specific question (this is called a research question ) through evidence-based arguments . Evidence-based is the keyword here. In other words, a research paper is different from an essay or other writing assignments that draw from the writer’s personal opinions or experiences. With a research paper, it’s all about building your arguments based on evidence (we’ll talk more about that evidence a little later).

Now, it’s worth noting that there are many different types of research papers , including analytical papers (the type I just described), argumentative papers, and interpretative papers. Here, we’ll focus on analytical papers , as these are some of the most common – but if you’re keen to learn about other types of research papers, be sure to check out the rest of the blog .

With that basic foundation laid, let’s get down to business and look at how to write a research paper .

Research Paper Template

Overview: The 3-Stage Process

While there are, of course, many potential approaches you can take to write a research paper, there are typically three stages to the writing process. So, in this tutorial, we’ll present a straightforward three-step process that we use when working with students at Grad Coach.

These three steps are:

  • Finding a research topic and reviewing the existing literature
  • Developing a provisional structure and outline for your paper, and
  • Writing up your initial draft and then refining it iteratively

Let’s dig into each of these.

Need a helping hand?

guide to write introduction for research paper

Step 1: Find a topic and review the literature

As we mentioned earlier, in a research paper, you, as the researcher, will try to answer a question . More specifically, that’s called a research question , and it sets the direction of your entire paper. What’s important to understand though is that you’ll need to answer that research question with the help of high-quality sources – for example, journal articles, government reports, case studies, and so on. We’ll circle back to this in a minute.

The first stage of the research process is deciding on what your research question will be and then reviewing the existing literature (in other words, past studies and papers) to see what they say about that specific research question. In some cases, your professor may provide you with a predetermined research question (or set of questions). However, in many cases, you’ll need to find your own research question within a certain topic area.

Finding a strong research question hinges on identifying a meaningful research gap – in other words, an area that’s lacking in existing research. There’s a lot to unpack here, so if you wanna learn more, check out the plain-language explainer video below.

Once you’ve figured out which question (or questions) you’ll attempt to answer in your research paper, you’ll need to do a deep dive into the existing literature – this is called a “ literature search ”. Again, there are many ways to go about this, but your most likely starting point will be Google Scholar .

If you’re new to Google Scholar, think of it as Google for the academic world. You can start by simply entering a few different keywords that are relevant to your research question and it will then present a host of articles for you to review. What you want to pay close attention to here is the number of citations for each paper – the more citations a paper has, the more credible it is (generally speaking – there are some exceptions, of course).

how to use google scholar

Ideally, what you’re looking for are well-cited papers that are highly relevant to your topic. That said, keep in mind that citations are a cumulative metric , so older papers will often have more citations than newer papers – just because they’ve been around for longer. So, don’t fixate on this metric in isolation – relevance and recency are also very important.

Beyond Google Scholar, you’ll also definitely want to check out academic databases and aggregators such as Science Direct, PubMed, JStor and so on. These will often overlap with the results that you find in Google Scholar, but they can also reveal some hidden gems – so, be sure to check them out.

Once you’ve worked your way through all the literature, you’ll want to catalogue all this information in some sort of spreadsheet so that you can easily recall who said what, when and within what context. If you’d like, we’ve got a free literature spreadsheet that helps you do exactly that.

Don’t fixate on an article’s citation count in isolation - relevance (to your research question) and recency are also very important.

Step 2: Develop a structure and outline

With your research question pinned down and your literature digested and catalogued, it’s time to move on to planning your actual research paper .

It might sound obvious, but it’s really important to have some sort of rough outline in place before you start writing your paper. So often, we see students eagerly rushing into the writing phase, only to land up with a disjointed research paper that rambles on in multiple

Now, the secret here is to not get caught up in the fine details . Realistically, all you need at this stage is a bullet-point list that describes (in broad strokes) what you’ll discuss and in what order. It’s also useful to remember that you’re not glued to this outline – in all likelihood, you’ll chop and change some sections once you start writing, and that’s perfectly okay. What’s important is that you have some sort of roadmap in place from the start.

You need to have a rough outline in place before you start writing your paper - or you’ll end up with a disjointed research paper that rambles on.

At this stage you might be wondering, “ But how should I structure my research paper? ”. Well, there’s no one-size-fits-all solution here, but in general, a research paper will consist of a few relatively standardised components:

  • Introduction
  • Literature review
  • Methodology

Let’s take a look at each of these.

First up is the introduction section . As the name suggests, the purpose of the introduction is to set the scene for your research paper. There are usually (at least) four ingredients that go into this section – these are the background to the topic, the research problem and resultant research question , and the justification or rationale. If you’re interested, the video below unpacks the introduction section in more detail. 

The next section of your research paper will typically be your literature review . Remember all that literature you worked through earlier? Well, this is where you’ll present your interpretation of all that content . You’ll do this by writing about recent trends, developments, and arguments within the literature – but more specifically, those that are relevant to your research question . The literature review can oftentimes seem a little daunting, even to seasoned researchers, so be sure to check out our extensive collection of literature review content here .

With the introduction and lit review out of the way, the next section of your paper is the research methodology . In a nutshell, the methodology section should describe to your reader what you did (beyond just reviewing the existing literature) to answer your research question. For example, what data did you collect, how did you collect that data, how did you analyse that data and so on? For each choice, you’ll also need to justify why you chose to do it that way, and what the strengths and weaknesses of your approach were.

Now, it’s worth mentioning that for some research papers, this aspect of the project may be a lot simpler . For example, you may only need to draw on secondary sources (in other words, existing data sets). In some cases, you may just be asked to draw your conclusions from the literature search itself (in other words, there may be no data analysis at all). But, if you are required to collect and analyse data, you’ll need to pay a lot of attention to the methodology section. The video below provides an example of what the methodology section might look like.

By this stage of your paper, you will have explained what your research question is, what the existing literature has to say about that question, and how you analysed additional data to try to answer your question. So, the natural next step is to present your analysis of that data . This section is usually called the “results” or “analysis” section and this is where you’ll showcase your findings.

Depending on your school’s requirements, you may need to present and interpret the data in one section – or you might split the presentation and the interpretation into two sections. In the latter case, your “results” section will just describe the data, and the “discussion” is where you’ll interpret that data and explicitly link your analysis back to your research question. If you’re not sure which approach to take, check in with your professor or take a look at past papers to see what the norms are for your programme.

Alright – once you’ve presented and discussed your results, it’s time to wrap it up . This usually takes the form of the “ conclusion ” section. In the conclusion, you’ll need to highlight the key takeaways from your study and close the loop by explicitly answering your research question. Again, the exact requirements here will vary depending on your programme (and you may not even need a conclusion section at all) – so be sure to check with your professor if you’re unsure.

Step 3: Write and refine

Finally, it’s time to get writing. All too often though, students hit a brick wall right about here… So, how do you avoid this happening to you?

Well, there’s a lot to be said when it comes to writing a research paper (or any sort of academic piece), but we’ll share three practical tips to help you get started.

First and foremost , it’s essential to approach your writing as an iterative process. In other words, you need to start with a really messy first draft and then polish it over multiple rounds of editing. Don’t waste your time trying to write a perfect research paper in one go. Instead, take the pressure off yourself by adopting an iterative approach.

Secondly , it’s important to always lean towards critical writing , rather than descriptive writing. What does this mean? Well, at the simplest level, descriptive writing focuses on the “ what ”, while critical writing digs into the “ so what ” – in other words, the implications . If you’re not familiar with these two types of writing, don’t worry! You can find a plain-language explanation here.

Last but not least, you’ll need to get your referencing right. Specifically, you’ll need to provide credible, correctly formatted citations for the statements you make. We see students making referencing mistakes all the time and it costs them dearly. The good news is that you can easily avoid this by using a simple reference manager . If you don’t have one, check out our video about Mendeley, an easy (and free) reference management tool that you can start using today.

Recap: Key Takeaways

We’ve covered a lot of ground here. To recap, the three steps to writing a high-quality research paper are:

  • To choose a research question and review the literature
  • To plan your paper structure and draft an outline
  • To take an iterative approach to writing, focusing on critical writing and strong referencing

Remember, this is just a b ig-picture overview of the research paper development process and there’s a lot more nuance to unpack. So, be sure to grab a copy of our free research paper template to learn more about how to write a research paper.

You Might Also Like:

Referencing in Word

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

  • Print Friendly
  • Privacy Policy

Research Method

Home » Research Paper – Structure, Examples and Writing Guide

Research Paper – Structure, Examples and Writing Guide

Table of Contents

Research Paper

Research Paper

Definition:

Research Paper is a written document that presents the author’s original research, analysis, and interpretation of a specific topic or issue.

It is typically based on Empirical Evidence, and may involve qualitative or quantitative research methods, or a combination of both. The purpose of a research paper is to contribute new knowledge or insights to a particular field of study, and to demonstrate the author’s understanding of the existing literature and theories related to the topic.

Structure of Research Paper

The structure of a research paper typically follows a standard format, consisting of several sections that convey specific information about the research study. The following is a detailed explanation of the structure of a research paper:

The title page contains the title of the paper, the name(s) of the author(s), and the affiliation(s) of the author(s). It also includes the date of submission and possibly, the name of the journal or conference where the paper is to be published.

The abstract is a brief summary of the research paper, typically ranging from 100 to 250 words. It should include the research question, the methods used, the key findings, and the implications of the results. The abstract should be written in a concise and clear manner to allow readers to quickly grasp the essence of the research.

Introduction

The introduction section of a research paper provides background information about the research problem, the research question, and the research objectives. It also outlines the significance of the research, the research gap that it aims to fill, and the approach taken to address the research question. Finally, the introduction section ends with a clear statement of the research hypothesis or research question.

Literature Review

The literature review section of a research paper provides an overview of the existing literature on the topic of study. It includes a critical analysis and synthesis of the literature, highlighting the key concepts, themes, and debates. The literature review should also demonstrate the research gap and how the current study seeks to address it.

The methods section of a research paper describes the research design, the sample selection, the data collection and analysis procedures, and the statistical methods used to analyze the data. This section should provide sufficient detail for other researchers to replicate the study.

The results section presents the findings of the research, using tables, graphs, and figures to illustrate the data. The findings should be presented in a clear and concise manner, with reference to the research question and hypothesis.

The discussion section of a research paper interprets the findings and discusses their implications for the research question, the literature review, and the field of study. It should also address the limitations of the study and suggest future research directions.

The conclusion section summarizes the main findings of the study, restates the research question and hypothesis, and provides a final reflection on the significance of the research.

The references section provides a list of all the sources cited in the paper, following a specific citation style such as APA, MLA or Chicago.

How to Write Research Paper

You can write Research Paper by the following guide:

  • Choose a Topic: The first step is to select a topic that interests you and is relevant to your field of study. Brainstorm ideas and narrow down to a research question that is specific and researchable.
  • Conduct a Literature Review: The literature review helps you identify the gap in the existing research and provides a basis for your research question. It also helps you to develop a theoretical framework and research hypothesis.
  • Develop a Thesis Statement : The thesis statement is the main argument of your research paper. It should be clear, concise and specific to your research question.
  • Plan your Research: Develop a research plan that outlines the methods, data sources, and data analysis procedures. This will help you to collect and analyze data effectively.
  • Collect and Analyze Data: Collect data using various methods such as surveys, interviews, observations, or experiments. Analyze data using statistical tools or other qualitative methods.
  • Organize your Paper : Organize your paper into sections such as Introduction, Literature Review, Methods, Results, Discussion, and Conclusion. Ensure that each section is coherent and follows a logical flow.
  • Write your Paper : Start by writing the introduction, followed by the literature review, methods, results, discussion, and conclusion. Ensure that your writing is clear, concise, and follows the required formatting and citation styles.
  • Edit and Proofread your Paper: Review your paper for grammar and spelling errors, and ensure that it is well-structured and easy to read. Ask someone else to review your paper to get feedback and suggestions for improvement.
  • Cite your Sources: Ensure that you properly cite all sources used in your research paper. This is essential for giving credit to the original authors and avoiding plagiarism.

Research Paper Example

Note : The below example research paper is for illustrative purposes only and is not an actual research paper. Actual research papers may have different structures, contents, and formats depending on the field of study, research question, data collection and analysis methods, and other factors. Students should always consult with their professors or supervisors for specific guidelines and expectations for their research papers.

Research Paper Example sample for Students:

Title: The Impact of Social Media on Mental Health among Young Adults

Abstract: This study aims to investigate the impact of social media use on the mental health of young adults. A literature review was conducted to examine the existing research on the topic. A survey was then administered to 200 university students to collect data on their social media use, mental health status, and perceived impact of social media on their mental health. The results showed that social media use is positively associated with depression, anxiety, and stress. The study also found that social comparison, cyberbullying, and FOMO (Fear of Missing Out) are significant predictors of mental health problems among young adults.

Introduction: Social media has become an integral part of modern life, particularly among young adults. While social media has many benefits, including increased communication and social connectivity, it has also been associated with negative outcomes, such as addiction, cyberbullying, and mental health problems. This study aims to investigate the impact of social media use on the mental health of young adults.

Literature Review: The literature review highlights the existing research on the impact of social media use on mental health. The review shows that social media use is associated with depression, anxiety, stress, and other mental health problems. The review also identifies the factors that contribute to the negative impact of social media, including social comparison, cyberbullying, and FOMO.

Methods : A survey was administered to 200 university students to collect data on their social media use, mental health status, and perceived impact of social media on their mental health. The survey included questions on social media use, mental health status (measured using the DASS-21), and perceived impact of social media on their mental health. Data were analyzed using descriptive statistics and regression analysis.

Results : The results showed that social media use is positively associated with depression, anxiety, and stress. The study also found that social comparison, cyberbullying, and FOMO are significant predictors of mental health problems among young adults.

Discussion : The study’s findings suggest that social media use has a negative impact on the mental health of young adults. The study highlights the need for interventions that address the factors contributing to the negative impact of social media, such as social comparison, cyberbullying, and FOMO.

Conclusion : In conclusion, social media use has a significant impact on the mental health of young adults. The study’s findings underscore the need for interventions that promote healthy social media use and address the negative outcomes associated with social media use. Future research can explore the effectiveness of interventions aimed at reducing the negative impact of social media on mental health. Additionally, longitudinal studies can investigate the long-term effects of social media use on mental health.

Limitations : The study has some limitations, including the use of self-report measures and a cross-sectional design. The use of self-report measures may result in biased responses, and a cross-sectional design limits the ability to establish causality.

Implications: The study’s findings have implications for mental health professionals, educators, and policymakers. Mental health professionals can use the findings to develop interventions that address the negative impact of social media use on mental health. Educators can incorporate social media literacy into their curriculum to promote healthy social media use among young adults. Policymakers can use the findings to develop policies that protect young adults from the negative outcomes associated with social media use.

References :

  • Twenge, J. M., & Campbell, W. K. (2019). Associations between screen time and lower psychological well-being among children and adolescents: Evidence from a population-based study. Preventive medicine reports, 15, 100918.
  • Primack, B. A., Shensa, A., Escobar-Viera, C. G., Barrett, E. L., Sidani, J. E., Colditz, J. B., … & James, A. E. (2017). Use of multiple social media platforms and symptoms of depression and anxiety: A nationally-representative study among US young adults. Computers in Human Behavior, 69, 1-9.
  • Van der Meer, T. G., & Verhoeven, J. W. (2017). Social media and its impact on academic performance of students. Journal of Information Technology Education: Research, 16, 383-398.

Appendix : The survey used in this study is provided below.

Social Media and Mental Health Survey

  • How often do you use social media per day?
  • Less than 30 minutes
  • 30 minutes to 1 hour
  • 1 to 2 hours
  • 2 to 4 hours
  • More than 4 hours
  • Which social media platforms do you use?
  • Others (Please specify)
  • How often do you experience the following on social media?
  • Social comparison (comparing yourself to others)
  • Cyberbullying
  • Fear of Missing Out (FOMO)
  • Have you ever experienced any of the following mental health problems in the past month?
  • Do you think social media use has a positive or negative impact on your mental health?
  • Very positive
  • Somewhat positive
  • Somewhat negative
  • Very negative
  • In your opinion, which factors contribute to the negative impact of social media on mental health?
  • Social comparison
  • In your opinion, what interventions could be effective in reducing the negative impact of social media on mental health?
  • Education on healthy social media use
  • Counseling for mental health problems caused by social media
  • Social media detox programs
  • Regulation of social media use

Thank you for your participation!

Applications of Research Paper

Research papers have several applications in various fields, including:

  • Advancing knowledge: Research papers contribute to the advancement of knowledge by generating new insights, theories, and findings that can inform future research and practice. They help to answer important questions, clarify existing knowledge, and identify areas that require further investigation.
  • Informing policy: Research papers can inform policy decisions by providing evidence-based recommendations for policymakers. They can help to identify gaps in current policies, evaluate the effectiveness of interventions, and inform the development of new policies and regulations.
  • Improving practice: Research papers can improve practice by providing evidence-based guidance for professionals in various fields, including medicine, education, business, and psychology. They can inform the development of best practices, guidelines, and standards of care that can improve outcomes for individuals and organizations.
  • Educating students : Research papers are often used as teaching tools in universities and colleges to educate students about research methods, data analysis, and academic writing. They help students to develop critical thinking skills, research skills, and communication skills that are essential for success in many careers.
  • Fostering collaboration: Research papers can foster collaboration among researchers, practitioners, and policymakers by providing a platform for sharing knowledge and ideas. They can facilitate interdisciplinary collaborations and partnerships that can lead to innovative solutions to complex problems.

When to Write Research Paper

Research papers are typically written when a person has completed a research project or when they have conducted a study and have obtained data or findings that they want to share with the academic or professional community. Research papers are usually written in academic settings, such as universities, but they can also be written in professional settings, such as research organizations, government agencies, or private companies.

Here are some common situations where a person might need to write a research paper:

  • For academic purposes: Students in universities and colleges are often required to write research papers as part of their coursework, particularly in the social sciences, natural sciences, and humanities. Writing research papers helps students to develop research skills, critical thinking skills, and academic writing skills.
  • For publication: Researchers often write research papers to publish their findings in academic journals or to present their work at academic conferences. Publishing research papers is an important way to disseminate research findings to the academic community and to establish oneself as an expert in a particular field.
  • To inform policy or practice : Researchers may write research papers to inform policy decisions or to improve practice in various fields. Research findings can be used to inform the development of policies, guidelines, and best practices that can improve outcomes for individuals and organizations.
  • To share new insights or ideas: Researchers may write research papers to share new insights or ideas with the academic or professional community. They may present new theories, propose new research methods, or challenge existing paradigms in their field.

Purpose of Research Paper

The purpose of a research paper is to present the results of a study or investigation in a clear, concise, and structured manner. Research papers are written to communicate new knowledge, ideas, or findings to a specific audience, such as researchers, scholars, practitioners, or policymakers. The primary purposes of a research paper are:

  • To contribute to the body of knowledge : Research papers aim to add new knowledge or insights to a particular field or discipline. They do this by reporting the results of empirical studies, reviewing and synthesizing existing literature, proposing new theories, or providing new perspectives on a topic.
  • To inform or persuade: Research papers are written to inform or persuade the reader about a particular issue, topic, or phenomenon. They present evidence and arguments to support their claims and seek to persuade the reader of the validity of their findings or recommendations.
  • To advance the field: Research papers seek to advance the field or discipline by identifying gaps in knowledge, proposing new research questions or approaches, or challenging existing assumptions or paradigms. They aim to contribute to ongoing debates and discussions within a field and to stimulate further research and inquiry.
  • To demonstrate research skills: Research papers demonstrate the author’s research skills, including their ability to design and conduct a study, collect and analyze data, and interpret and communicate findings. They also demonstrate the author’s ability to critically evaluate existing literature, synthesize information from multiple sources, and write in a clear and structured manner.

Characteristics of Research Paper

Research papers have several characteristics that distinguish them from other forms of academic or professional writing. Here are some common characteristics of research papers:

  • Evidence-based: Research papers are based on empirical evidence, which is collected through rigorous research methods such as experiments, surveys, observations, or interviews. They rely on objective data and facts to support their claims and conclusions.
  • Structured and organized: Research papers have a clear and logical structure, with sections such as introduction, literature review, methods, results, discussion, and conclusion. They are organized in a way that helps the reader to follow the argument and understand the findings.
  • Formal and objective: Research papers are written in a formal and objective tone, with an emphasis on clarity, precision, and accuracy. They avoid subjective language or personal opinions and instead rely on objective data and analysis to support their arguments.
  • Citations and references: Research papers include citations and references to acknowledge the sources of information and ideas used in the paper. They use a specific citation style, such as APA, MLA, or Chicago, to ensure consistency and accuracy.
  • Peer-reviewed: Research papers are often peer-reviewed, which means they are evaluated by other experts in the field before they are published. Peer-review ensures that the research is of high quality, meets ethical standards, and contributes to the advancement of knowledge in the field.
  • Objective and unbiased: Research papers strive to be objective and unbiased in their presentation of the findings. They avoid personal biases or preconceptions and instead rely on the data and analysis to draw conclusions.

Advantages of Research Paper

Research papers have many advantages, both for the individual researcher and for the broader academic and professional community. Here are some advantages of research papers:

  • Contribution to knowledge: Research papers contribute to the body of knowledge in a particular field or discipline. They add new information, insights, and perspectives to existing literature and help advance the understanding of a particular phenomenon or issue.
  • Opportunity for intellectual growth: Research papers provide an opportunity for intellectual growth for the researcher. They require critical thinking, problem-solving, and creativity, which can help develop the researcher’s skills and knowledge.
  • Career advancement: Research papers can help advance the researcher’s career by demonstrating their expertise and contributions to the field. They can also lead to new research opportunities, collaborations, and funding.
  • Academic recognition: Research papers can lead to academic recognition in the form of awards, grants, or invitations to speak at conferences or events. They can also contribute to the researcher’s reputation and standing in the field.
  • Impact on policy and practice: Research papers can have a significant impact on policy and practice. They can inform policy decisions, guide practice, and lead to changes in laws, regulations, or procedures.
  • Advancement of society: Research papers can contribute to the advancement of society by addressing important issues, identifying solutions to problems, and promoting social justice and equality.

Limitations of Research Paper

Research papers also have some limitations that should be considered when interpreting their findings or implications. Here are some common limitations of research papers:

  • Limited generalizability: Research findings may not be generalizable to other populations, settings, or contexts. Studies often use specific samples or conditions that may not reflect the broader population or real-world situations.
  • Potential for bias : Research papers may be biased due to factors such as sample selection, measurement errors, or researcher biases. It is important to evaluate the quality of the research design and methods used to ensure that the findings are valid and reliable.
  • Ethical concerns: Research papers may raise ethical concerns, such as the use of vulnerable populations or invasive procedures. Researchers must adhere to ethical guidelines and obtain informed consent from participants to ensure that the research is conducted in a responsible and respectful manner.
  • Limitations of methodology: Research papers may be limited by the methodology used to collect and analyze data. For example, certain research methods may not capture the complexity or nuance of a particular phenomenon, or may not be appropriate for certain research questions.
  • Publication bias: Research papers may be subject to publication bias, where positive or significant findings are more likely to be published than negative or non-significant findings. This can skew the overall findings of a particular area of research.
  • Time and resource constraints: Research papers may be limited by time and resource constraints, which can affect the quality and scope of the research. Researchers may not have access to certain data or resources, or may be unable to conduct long-term studies due to practical limitations.

About the author

' src=

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Research Paper Citation

How to Cite Research Paper – All Formats and...

Data collection

Data Collection – Methods Types and Examples

Delimitations

Delimitations in Research – Types, Examples and...

Research Paper Formats

Research Paper Format – Types, Examples and...

Research Process

Research Process – Steps, Examples and Tips

Research Design

Research Design – Types, Methods and Examples

U.S. flag

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

  • Publications
  • Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

  • Advanced Search
  • Journal List
  • Yale J Biol Med
  • v.84(3); 2011 Sep

Logo of yjbm

Focus: Education — Career Advice

How to write your first research paper.

Writing a research manuscript is an intimidating process for many novice writers in the sciences. One of the stumbling blocks is the beginning of the process and creating the first draft. This paper presents guidelines on how to initiate the writing process and draft each section of a research manuscript. The paper discusses seven rules that allow the writer to prepare a well-structured and comprehensive manuscript for a publication submission. In addition, the author lists different strategies for successful revision. Each of those strategies represents a step in the revision process and should help the writer improve the quality of the manuscript. The paper could be considered a brief manual for publication.

It is late at night. You have been struggling with your project for a year. You generated an enormous amount of interesting data. Your pipette feels like an extension of your hand, and running western blots has become part of your daily routine, similar to brushing your teeth. Your colleagues think you are ready to write a paper, and your lab mates tease you about your “slow” writing progress. Yet days pass, and you cannot force yourself to sit down to write. You have not written anything for a while (lab reports do not count), and you feel you have lost your stamina. How does the writing process work? How can you fit your writing into a daily schedule packed with experiments? What section should you start with? What distinguishes a good research paper from a bad one? How should you revise your paper? These and many other questions buzz in your head and keep you stressed. As a result, you procrastinate. In this paper, I will discuss the issues related to the writing process of a scientific paper. Specifically, I will focus on the best approaches to start a scientific paper, tips for writing each section, and the best revision strategies.

1. Schedule your writing time in Outlook

Whether you have written 100 papers or you are struggling with your first, starting the process is the most difficult part unless you have a rigid writing schedule. Writing is hard. It is a very difficult process of intense concentration and brain work. As stated in Hayes’ framework for the study of writing: “It is a generative activity requiring motivation, and it is an intellectual activity requiring cognitive processes and memory” [ 1 ]. In his book How to Write a Lot: A Practical Guide to Productive Academic Writing , Paul Silvia says that for some, “it’s easier to embalm the dead than to write an article about it” [ 2 ]. Just as with any type of hard work, you will not succeed unless you practice regularly. If you have not done physical exercises for a year, only regular workouts can get you into good shape again. The same kind of regular exercises, or I call them “writing sessions,” are required to be a productive author. Choose from 1- to 2-hour blocks in your daily work schedule and consider them as non-cancellable appointments. When figuring out which blocks of time will be set for writing, you should select the time that works best for this type of work. For many people, mornings are more productive. One Yale University graduate student spent a semester writing from 8 a.m. to 9 a.m. when her lab was empty. At the end of the semester, she was amazed at how much she accomplished without even interrupting her regular lab hours. In addition, doing the hardest task first thing in the morning contributes to the sense of accomplishment during the rest of the day. This positive feeling spills over into our work and life and has a very positive effect on our overall attitude.

Rule 1: Create regular time blocks for writing as appointments in your calendar and keep these appointments.

2. start with an outline.

Now that you have scheduled time, you need to decide how to start writing. The best strategy is to start with an outline. This will not be an outline that you are used to, with Roman numerals for each section and neat parallel listing of topic sentences and supporting points. This outline will be similar to a template for your paper. Initially, the outline will form a structure for your paper; it will help generate ideas and formulate hypotheses. Following the advice of George M. Whitesides, “. . . start with a blank piece of paper, and write down, in any order, all important ideas that occur to you concerning the paper” [ 3 ]. Use Table 1 as a starting point for your outline. Include your visuals (figures, tables, formulas, equations, and algorithms), and list your findings. These will constitute the first level of your outline, which will eventually expand as you elaborate.

The next stage is to add context and structure. Here you will group all your ideas into sections: Introduction, Methods, Results, and Discussion/Conclusion ( Table 2 ). This step will help add coherence to your work and sift your ideas.

Now that you have expanded your outline, you are ready for the next step: discussing the ideas for your paper with your colleagues and mentor. Many universities have a writing center where graduate students can schedule individual consultations and receive assistance with their paper drafts. Getting feedback during early stages of your draft can save a lot of time. Talking through ideas allows people to conceptualize and organize thoughts to find their direction without wasting time on unnecessary writing. Outlining is the most effective way of communicating your ideas and exchanging thoughts. Moreover, it is also the best stage to decide to which publication you will submit the paper. Many people come up with three choices and discuss them with their mentors and colleagues. Having a list of journal priorities can help you quickly resubmit your paper if your paper is rejected.

Rule 2: Create a detailed outline and discuss it with your mentor and peers.

3. continue with drafts.

After you get enough feedback and decide on the journal you will submit to, the process of real writing begins. Copy your outline into a separate file and expand on each of the points, adding data and elaborating on the details. When you create the first draft, do not succumb to the temptation of editing. Do not slow down to choose a better word or better phrase; do not halt to improve your sentence structure. Pour your ideas into the paper and leave revision and editing for later. As Paul Silvia explains, “Revising while you generate text is like drinking decaffeinated coffee in the early morning: noble idea, wrong time” [ 2 ].

Many students complain that they are not productive writers because they experience writer’s block. Staring at an empty screen is frustrating, but your screen is not really empty: You have a template of your article, and all you need to do is fill in the blanks. Indeed, writer’s block is a logical fallacy for a scientist ― it is just an excuse to procrastinate. When scientists start writing a research paper, they already have their files with data, lab notes with materials and experimental designs, some visuals, and tables with results. All they need to do is scrutinize these pieces and put them together into a comprehensive paper.

3.1. Starting with Materials and Methods

If you still struggle with starting a paper, then write the Materials and Methods section first. Since you have all your notes, it should not be problematic for you to describe the experimental design and procedures. Your most important goal in this section is to be as explicit as possible by providing enough detail and references. In the end, the purpose of this section is to allow other researchers to evaluate and repeat your work. So do not run into the same problems as the writers of the sentences in (1):

1a. Bacteria were pelleted by centrifugation. 1b. To isolate T cells, lymph nodes were collected.

As you can see, crucial pieces of information are missing: the speed of centrifuging your bacteria, the time, and the temperature in (1a); the source of lymph nodes for collection in (b). The sentences can be improved when information is added, as in (2a) and (2b), respectfully:

2a. Bacteria were pelleted by centrifugation at 3000g for 15 min at 25°C. 2b. To isolate T cells, mediastinal and mesenteric lymph nodes from Balb/c mice were collected at day 7 after immunization with ovabumin.

If your method has previously been published and is well-known, then you should provide only the literature reference, as in (3a). If your method is unpublished, then you need to make sure you provide all essential details, as in (3b).

3a. Stem cells were isolated, according to Johnson [23]. 3b. Stem cells were isolated using biotinylated carbon nanotubes coated with anti-CD34 antibodies.

Furthermore, cohesion and fluency are crucial in this section. One of the malpractices resulting in disrupted fluency is switching from passive voice to active and vice versa within the same paragraph, as shown in (4). This switching misleads and distracts the reader.

4. Behavioral computer-based experiments of Study 1 were programmed by using E-Prime. We took ratings of enjoyment, mood, and arousal as the patients listened to preferred pleasant music and unpreferred music by using Visual Analogue Scales (SI Methods). The preferred and unpreferred status of the music was operationalized along a continuum of pleasantness [ 4 ].

The problem with (4) is that the reader has to switch from the point of view of the experiment (passive voice) to the point of view of the experimenter (active voice). This switch causes confusion about the performer of the actions in the first and the third sentences. To improve the coherence and fluency of the paragraph above, you should be consistent in choosing the point of view: first person “we” or passive voice [ 5 ]. Let’s consider two revised examples in (5).

5a. We programmed behavioral computer-based experiments of Study 1 by using E-Prime. We took ratings of enjoyment, mood, and arousal by using Visual Analogue Scales (SI Methods) as the patients listened to preferred pleasant music and unpreferred music. We operationalized the preferred and unpreferred status of the music along a continuum of pleasantness. 5b. Behavioral computer-based experiments of Study 1 were programmed by using E-Prime. Ratings of enjoyment, mood, and arousal were taken as the patients listened to preferred pleasant music and unpreferred music by using Visual Analogue Scales (SI Methods). The preferred and unpreferred status of the music was operationalized along a continuum of pleasantness.

If you choose the point of view of the experimenter, then you may end up with repetitive “we did this” sentences. For many readers, paragraphs with sentences all beginning with “we” may also sound disruptive. So if you choose active sentences, you need to keep the number of “we” subjects to a minimum and vary the beginnings of the sentences [ 6 ].

Interestingly, recent studies have reported that the Materials and Methods section is the only section in research papers in which passive voice predominantly overrides the use of the active voice [ 5 , 7 , 8 , 9 ]. For example, Martínez shows a significant drop in active voice use in the Methods sections based on the corpus of 1 million words of experimental full text research articles in the biological sciences [ 7 ]. According to the author, the active voice patterned with “we” is used only as a tool to reveal personal responsibility for the procedural decisions in designing and performing experimental work. This means that while all other sections of the research paper use active voice, passive voice is still the most predominant in Materials and Methods sections.

Writing Materials and Methods sections is a meticulous and time consuming task requiring extreme accuracy and clarity. This is why when you complete your draft, you should ask for as much feedback from your colleagues as possible. Numerous readers of this section will help you identify the missing links and improve the technical style of this section.

Rule 3: Be meticulous and accurate in describing the Materials and Methods. Do not change the point of view within one paragraph.

3.2. writing results section.

For many authors, writing the Results section is more intimidating than writing the Materials and Methods section . If people are interested in your paper, they are interested in your results. That is why it is vital to use all your writing skills to objectively present your key findings in an orderly and logical sequence using illustrative materials and text.

Your Results should be organized into different segments or subsections where each one presents the purpose of the experiment, your experimental approach, data including text and visuals (tables, figures, schematics, algorithms, and formulas), and data commentary. For most journals, your data commentary will include a meaningful summary of the data presented in the visuals and an explanation of the most significant findings. This data presentation should not repeat the data in the visuals, but rather highlight the most important points. In the “standard” research paper approach, your Results section should exclude data interpretation, leaving it for the Discussion section. However, interpretations gradually and secretly creep into research papers: “Reducing the data, generalizing from the data, and highlighting scientific cases are all highly interpretive processes. It should be clear by now that we do not let the data speak for themselves in research reports; in summarizing our results, we interpret them for the reader” [ 10 ]. As a result, many journals including the Journal of Experimental Medicine and the Journal of Clinical Investigation use joint Results/Discussion sections, where results are immediately followed by interpretations.

Another important aspect of this section is to create a comprehensive and supported argument or a well-researched case. This means that you should be selective in presenting data and choose only those experimental details that are essential for your reader to understand your findings. You might have conducted an experiment 20 times and collected numerous records, but this does not mean that you should present all those records in your paper. You need to distinguish your results from your data and be able to discard excessive experimental details that could distract and confuse the reader. However, creating a picture or an argument should not be confused with data manipulation or falsification, which is a willful distortion of data and results. If some of your findings contradict your ideas, you have to mention this and find a plausible explanation for the contradiction.

In addition, your text should not include irrelevant and peripheral information, including overview sentences, as in (6).

6. To show our results, we first introduce all components of experimental system and then describe the outcome of infections.

Indeed, wordiness convolutes your sentences and conceals your ideas from readers. One common source of wordiness is unnecessary intensifiers. Adverbial intensifiers such as “clearly,” “essential,” “quite,” “basically,” “rather,” “fairly,” “really,” and “virtually” not only add verbosity to your sentences, but also lower your results’ credibility. They appeal to the reader’s emotions but lower objectivity, as in the common examples in (7):

7a. Table 3 clearly shows that … 7b. It is obvious from figure 4 that …

Another source of wordiness is nominalizations, i.e., nouns derived from verbs and adjectives paired with weak verbs including “be,” “have,” “do,” “make,” “cause,” “provide,” and “get” and constructions such as “there is/are.”

8a. We tested the hypothesis that there is a disruption of membrane asymmetry. 8b. In this paper we provide an argument that stem cells repopulate injured organs.

In the sentences above, the abstract nominalizations “disruption” and “argument” do not contribute to the clarity of the sentences, but rather clutter them with useless vocabulary that distracts from the meaning. To improve your sentences, avoid unnecessary nominalizations and change passive verbs and constructions into active and direct sentences.

9a. We tested the hypothesis that the membrane asymmetry is disrupted. 9b. In this paper we argue that stem cells repopulate injured organs.

Your Results section is the heart of your paper, representing a year or more of your daily research. So lead your reader through your story by writing direct, concise, and clear sentences.

Rule 4: Be clear, concise, and objective in describing your Results.

3.3. now it is time for your introduction.

Now that you are almost half through drafting your research paper, it is time to update your outline. While describing your Methods and Results, many of you diverged from the original outline and re-focused your ideas. So before you move on to create your Introduction, re-read your Methods and Results sections and change your outline to match your research focus. The updated outline will help you review the general picture of your paper, the topic, the main idea, and the purpose, which are all important for writing your introduction.

The best way to structure your introduction is to follow the three-move approach shown in Table 3 .

Adapted from Swales and Feak [ 11 ].

The moves and information from your outline can help to create your Introduction efficiently and without missing steps. These moves are traffic signs that lead the reader through the road of your ideas. Each move plays an important role in your paper and should be presented with deep thought and care. When you establish the territory, you place your research in context and highlight the importance of your research topic. By finding the niche, you outline the scope of your research problem and enter the scientific dialogue. The final move, “occupying the niche,” is where you explain your research in a nutshell and highlight your paper’s significance. The three moves allow your readers to evaluate their interest in your paper and play a significant role in the paper review process, determining your paper reviewers.

Some academic writers assume that the reader “should follow the paper” to find the answers about your methodology and your findings. As a result, many novice writers do not present their experimental approach and the major findings, wrongly believing that the reader will locate the necessary information later while reading the subsequent sections [ 5 ]. However, this “suspense” approach is not appropriate for scientific writing. To interest the reader, scientific authors should be direct and straightforward and present informative one-sentence summaries of the results and the approach.

Another problem is that writers understate the significance of the Introduction. Many new researchers mistakenly think that all their readers understand the importance of the research question and omit this part. However, this assumption is faulty because the purpose of the section is not to evaluate the importance of the research question in general. The goal is to present the importance of your research contribution and your findings. Therefore, you should be explicit and clear in describing the benefit of the paper.

The Introduction should not be long. Indeed, for most journals, this is a very brief section of about 250 to 600 words, but it might be the most difficult section due to its importance.

Rule 5: Interest your reader in the Introduction section by signalling all its elements and stating the novelty of the work.

3.4. discussion of the results.

For many scientists, writing a Discussion section is as scary as starting a paper. Most of the fear comes from the variation in the section. Since every paper has its unique results and findings, the Discussion section differs in its length, shape, and structure. However, some general principles of writing this section still exist. Knowing these rules, or “moves,” can change your attitude about this section and help you create a comprehensive interpretation of your results.

The purpose of the Discussion section is to place your findings in the research context and “to explain the meaning of the findings and why they are important, without appearing arrogant, condescending, or patronizing” [ 11 ]. The structure of the first two moves is almost a mirror reflection of the one in the Introduction. In the Introduction, you zoom in from general to specific and from the background to your research question; in the Discussion section, you zoom out from the summary of your findings to the research context, as shown in Table 4 .

Adapted from Swales and Feak and Hess [ 11 , 12 ].

The biggest challenge for many writers is the opening paragraph of the Discussion section. Following the moves in Table 1 , the best choice is to start with the study’s major findings that provide the answer to the research question in your Introduction. The most common starting phrases are “Our findings demonstrate . . .,” or “In this study, we have shown that . . .,” or “Our results suggest . . .” In some cases, however, reminding the reader about the research question or even providing a brief context and then stating the answer would make more sense. This is important in those cases where the researcher presents a number of findings or where more than one research question was presented. Your summary of the study’s major findings should be followed by your presentation of the importance of these findings. One of the most frequent mistakes of the novice writer is to assume the importance of his findings. Even if the importance is clear to you, it may not be obvious to your reader. Digesting the findings and their importance to your reader is as crucial as stating your research question.

Another useful strategy is to be proactive in the first move by predicting and commenting on the alternative explanations of the results. Addressing potential doubts will save you from painful comments about the wrong interpretation of your results and will present you as a thoughtful and considerate researcher. Moreover, the evaluation of the alternative explanations might help you create a logical step to the next move of the discussion section: the research context.

The goal of the research context move is to show how your findings fit into the general picture of the current research and how you contribute to the existing knowledge on the topic. This is also the place to discuss any discrepancies and unexpected findings that may otherwise distort the general picture of your paper. Moreover, outlining the scope of your research by showing the limitations, weaknesses, and assumptions is essential and adds modesty to your image as a scientist. However, make sure that you do not end your paper with the problems that override your findings. Try to suggest feasible explanations and solutions.

If your submission does not require a separate Conclusion section, then adding another paragraph about the “take-home message” is a must. This should be a general statement reiterating your answer to the research question and adding its scientific implications, practical application, or advice.

Just as in all other sections of your paper, the clear and precise language and concise comprehensive sentences are vital. However, in addition to that, your writing should convey confidence and authority. The easiest way to illustrate your tone is to use the active voice and the first person pronouns. Accompanied by clarity and succinctness, these tools are the best to convince your readers of your point and your ideas.

Rule 6: Present the principles, relationships, and generalizations in a concise and convincing tone.

4. choosing the best working revision strategies.

Now that you have created the first draft, your attitude toward your writing should have improved. Moreover, you should feel more confident that you are able to accomplish your project and submit your paper within a reasonable timeframe. You also have worked out your writing schedule and followed it precisely. Do not stop ― you are only at the midpoint from your destination. Just as the best and most precious diamond is no more than an unattractive stone recognized only by trained professionals, your ideas and your results may go unnoticed if they are not polished and brushed. Despite your attempts to present your ideas in a logical and comprehensive way, first drafts are frequently a mess. Use the advice of Paul Silvia: “Your first drafts should sound like they were hastily translated from Icelandic by a non-native speaker” [ 2 ]. The degree of your success will depend on how you are able to revise and edit your paper.

The revision can be done at the macrostructure and the microstructure levels [ 13 ]. The macrostructure revision includes the revision of the organization, content, and flow. The microstructure level includes individual words, sentence structure, grammar, punctuation, and spelling.

The best way to approach the macrostructure revision is through the outline of the ideas in your paper. The last time you updated your outline was before writing the Introduction and the Discussion. Now that you have the beginning and the conclusion, you can take a bird’s-eye view of the whole paper. The outline will allow you to see if the ideas of your paper are coherently structured, if your results are logically built, and if the discussion is linked to the research question in the Introduction. You will be able to see if something is missing in any of the sections or if you need to rearrange your information to make your point.

The next step is to revise each of the sections starting from the beginning. Ideally, you should limit yourself to working on small sections of about five pages at a time [ 14 ]. After these short sections, your eyes get used to your writing and your efficiency in spotting problems decreases. When reading for content and organization, you should control your urge to edit your paper for sentence structure and grammar and focus only on the flow of your ideas and logic of your presentation. Experienced researchers tend to make almost three times the number of changes to meaning than novice writers [ 15 , 16 ]. Revising is a difficult but useful skill, which academic writers obtain with years of practice.

In contrast to the macrostructure revision, which is a linear process and is done usually through a detailed outline and by sections, microstructure revision is a non-linear process. While the goal of the macrostructure revision is to analyze your ideas and their logic, the goal of the microstructure editing is to scrutinize the form of your ideas: your paragraphs, sentences, and words. You do not need and are not recommended to follow the order of the paper to perform this type of revision. You can start from the end or from different sections. You can even revise by reading sentences backward, sentence by sentence and word by word.

One of the microstructure revision strategies frequently used during writing center consultations is to read the paper aloud [ 17 ]. You may read aloud to yourself, to a tape recorder, or to a colleague or friend. When reading and listening to your paper, you are more likely to notice the places where the fluency is disrupted and where you stumble because of a very long and unclear sentence or a wrong connector.

Another revision strategy is to learn your common errors and to do a targeted search for them [ 13 ]. All writers have a set of problems that are specific to them, i.e., their writing idiosyncrasies. Remembering these problems is as important for an academic writer as remembering your friends’ birthdays. Create a list of these idiosyncrasies and run a search for these problems using your word processor. If your problem is demonstrative pronouns without summary words, then search for “this/these/those” in your text and check if you used the word appropriately. If you have a problem with intensifiers, then search for “really” or “very” and delete them from the text. The same targeted search can be done to eliminate wordiness. Searching for “there is/are” or “and” can help you avoid the bulky sentences.

The final strategy is working with a hard copy and a pencil. Print a double space copy with font size 14 and re-read your paper in several steps. Try reading your paper line by line with the rest of the text covered with a piece of paper. When you are forced to see only a small portion of your writing, you are less likely to get distracted and are more likely to notice problems. You will end up spotting more unnecessary words, wrongly worded phrases, or unparallel constructions.

After you apply all these strategies, you are ready to share your writing with your friends, colleagues, and a writing advisor in the writing center. Get as much feedback as you can, especially from non-specialists in your field. Patiently listen to what others say to you ― you are not expected to defend your writing or explain what you wanted to say. You may decide what you want to change and how after you receive the feedback and sort it in your head. Even though some researchers make the revision an endless process and can hardly stop after a 14th draft; having from five to seven drafts of your paper is a norm in the sciences. If you can’t stop revising, then set a deadline for yourself and stick to it. Deadlines always help.

Rule 7: Revise your paper at the macrostructure and the microstructure level using different strategies and techniques. Receive feedback and revise again.

5. it is time to submit.

It is late at night again. You are still in your lab finishing revisions and getting ready to submit your paper. You feel happy ― you have finally finished a year’s worth of work. You will submit your paper tomorrow, and regardless of the outcome, you know that you can do it. If one journal does not take your paper, you will take advantage of the feedback and resubmit again. You will have a publication, and this is the most important achievement.

What is even more important is that you have your scheduled writing time that you are going to keep for your future publications, for reading and taking notes, for writing grants, and for reviewing papers. You are not going to lose stamina this time, and you will become a productive scientist. But for now, let’s celebrate the end of the paper.

  • Hayes JR. In: The Science of Writing: Theories, Methods, Individual Differences, and Applications. Levy CM, Ransdell SE, editors. Mahwah, NJ: Lawrence Erlbaum; 1996. A new framework for understanding cognition and affect in writing; pp. 1–28. [ Google Scholar ]
  • Silvia PJ. How to Write a Lot. Washington, DC: American Psychological Association; 2007. [ Google Scholar ]
  • Whitesides GM. Whitesides’ Group: Writing a Paper. Adv Mater. 2004; 16 (15):1375–1377. [ Google Scholar ]
  • Soto D, Funes MJ, Guzmán-García A, Warbrick T, Rotshtein T, Humphreys GW. Pleasant music overcomes the loss of awareness in patients with visual neglect. Proc Natl Acad Sci USA. 2009; 106 (14):6011–6016. [ PMC free article ] [ PubMed ] [ Google Scholar ]
  • Hofmann AH. Scientific Writing and Communication. Papers, Proposals, and Presentations. New York: Oxford University Press; 2010. [ Google Scholar ]
  • Zeiger M. Essentials of Writing Biomedical Research Papers. 2nd edition. San Francisco, CA: McGraw-Hill Companies, Inc.; 2000. [ Google Scholar ]
  • Martínez I. Native and non-native writers’ use of first person pronouns in the different sections of biology research articles in English. Journal of Second Language Writing. 2005; 14 (3):174–190. [ Google Scholar ]
  • Rodman L. The Active Voice In Scientific Articles: Frequency And Discourse Functions. Journal Of Technical Writing And Communication. 1994; 24 (3):309–331. [ Google Scholar ]
  • Tarone LE, Dwyer S, Gillette S, Icke V. On the use of the passive in two astrophysics journal papers with extensions to other languages and other fields. English for Specific Purposes. 1998; 17 :113–132. [ Google Scholar ]
  • Penrose AM, Katz SB. Writing in the sciences: Exploring conventions of scientific discourse. New York: St. Martin’s Press; 1998. [ Google Scholar ]
  • Swales JM, Feak CB. Academic Writing for Graduate Students. 2nd edition. Ann Arbor: University of Michigan Press; 2004. [ Google Scholar ]
  • Hess DR. How to Write an Effective Discussion. Respiratory Care. 2004; 29 (10):1238–1241. [ PubMed ] [ Google Scholar ]
  • Belcher WL. Writing Your Journal Article in 12 Weeks: a guide to academic publishing success. Thousand Oaks, CA: SAGE Publications; 2009. [ Google Scholar ]
  • Single PB. Demystifying Dissertation Writing: A Streamlined Process of Choice of Topic to Final Text. Virginia: Stylus Publishing LLC; 2010. [ Google Scholar ]
  • Faigley L, Witte SP. Analyzing revision. Composition and Communication. 1981; 32 :400–414. [ Google Scholar ]
  • Flower LS, Hayes JR, Carey L, Schriver KS, Stratman J. Detection, diagnosis, and the strategies of revision. College Composition and Communication. 1986; 37 (1):16–55. [ Google Scholar ]
  • Young BR. In: A Tutor’s Guide: Helping Writers One to One. Rafoth B, editor. Portsmouth, NH: Boynton/Cook Publishers; 2005. Can You Proofread This? pp. 140–158. [ Google Scholar ]

How to Write a Research Paper 

How to Write a Research Paper 

  • Smodin Editorial Team
  • Updated: May 17, 2024

Most students hate writing research papers. The process can often feel long, tedious, and sometimes outright boring. Nevertheless, these assignments are vital to a student’s academic journey. Want to learn how to write a research paper that captures the depth of the subject and maintains the reader’s interest? If so, this guide is for you.

Today, we’ll show you how to assemble a well-organized research paper to help you make the grade. You can transform any topic into a compelling research paper with a thoughtful approach to your research and a persuasive argument.

In this guide, we’ll provide seven simple but practical tips to help demystify the process and guide you on your way. We’ll also explain how AI tools can expedite the research and writing process so you can focus on critical thinking.

By the end of this article, you’ll have a clear roadmap for tackling these essays. You will also learn how to tackle them quickly and efficiently. With time and dedication, you’ll soon master the art of research paper writing.

Ready to get started?

What Is a Research Paper?

A research paper is a comprehensive essay that gives a detailed analysis, interpretation, or argument based on your own independent research. In higher-level academic settings, it goes beyond a simple summarization and includes a deep inquiry into the topic or topics.

The term “research paper” is a broad term that can be applied to many different forms of academic writing. The goal is to combine your thoughts with the findings from peer-reviewed scholarly literature.

By the time your essay is done, you should have provided your reader with a new perspective or challenged existing findings. This demonstrates your mastery of the subject and contributes to ongoing scholarly debates.

7 Tips for Writing a Research Paper

Often, getting started is the most challenging part of a research paper. While the process can seem daunting, breaking it down into manageable steps can make it easier to manage. The following are seven tips for getting your ideas out of your head and onto the page.

1. Understand Your Assignment

It may sound simple, but the first step in writing a successful research paper is to read the assignment. Sit down, take a few moments of your time, and go through the instructions so you fully understand your assignment.

Misinterpreting the assignment can not only lead to a significant waste of time but also affect your grade. No matter how patient your teacher or professor may be, ignoring basic instructions is often inexcusable.

If you read the instructions and are still confused, ask for clarification before you start writing. If that’s impossible, you can use tools like Smodin’s AI chat to help. Smodin can help highlight critical requirements that you may overlook.

This initial investment ensures that all your future efforts will be focused and efficient. Remember, thinking is just as important as actually writing the essay, and it can also pave the wave for a smoother writing process.

2. Gather Research Materials

Now comes the fun part: doing the research. As you gather research materials, always use credible sources, such as academic journals or peer-reviewed papers. Only use search engines that filter for accredited sources and academic databases so you can ensure your information is reliable.

To optimize your time, you must learn to master the art of skimming. If a source seems relevant and valuable, save it and review it later. The last thing you want to do is waste time on material that won’t make it into the final paper.

To speed up the process even more, consider using Smodin’s AI summarizer . This tool can help summarize large texts, highlighting key information relevant to your topic. By systematically gathering and filing research materials early in the writing process, you build a strong foundation for your thesis.

3. Write Your Thesis

Creating a solid thesis statement is the most important thing you can do to bring structure and focus to your research paper. Your thesis should express the main point of your argument in one or two simple sentences. Remember, when you create your thesis, you’re setting the tone and direction for the entire paper.

Of course, you can’t just pull a winning thesis out of thin air. Start by brainstorming potential thesis ideas based on your preliminary research. And don’t overthink things; sometimes, the most straightforward ideas are often the best.

You want a thesis that is specific enough to be manageable within the scope of your paper but broad enough to allow for a unique discussion. Your thesis should challenge existing expectations and provide the reader with fresh insight into the topic. Use your thesis to hook the reader in the opening paragraph and keep them engaged until the very last word.

4. Write Your Outline

An outline is an often overlooked but essential tool for organizing your thoughts and structuring your paper. Many students skip the outline because it feels like doing double work, but a strong outline will save you work in the long run.

Here’s how to effectively structure your outline.

  • Introduction: List your thesis statement and outline the main questions your essay will answer.
  • Literature Review: Outline the key literature you plan to discuss and explain how it will relate to your thesis.
  • Methodology: Explain the research methods you will use to gather and analyze the information.
  • Discussion: Plan how you will interpret the results and their implications for your thesis.
  • Conclusion: Summarize the content above to elucidate your thesis fully.

To further streamline this process, consider using Smodin’s Research Writer. This tool offers a feature that allows you to generate and tweak an outline to your liking based on the initial input you provide. You can adjust this outline to fit your research findings better and ensure that your paper remains well-organized and focused.

5. Write a Rough Draft

Once your outline is in place, you can begin the writing process. Remember, when you write a rough draft, it isn’t meant to be perfect. Instead, use it as a working document where you can experiment with and rearrange your arguments and evidence.

Don’t worry too much about grammar, style, or syntax as you write your rough draft. Focus on getting your ideas down on paper and flush out your thesis arguments. You can always refine and rearrange the content the next time around.

Follow the basic structure of your outline but with the freedom to explore different ways of expressing your thoughts. Smodin’s Essay Writer offers a powerful solution for those struggling with starting or structuring their drafts.

After you approve the outline, Smodin can generate an essay based on your initial inputs. This feature can help you quickly create a comprehensive draft, which you can then review and refine. You can even use the power of AI to create multiple rough drafts from which to choose.

6. Add or Subtract Supporting Evidence

Once you have a rough draft, but before you start the final revision, it’s time to do a little cleanup. In this phase, you need to review all your supporting evidence. You want to ensure that there is nothing redundant and that you haven’t overlooked any crucial details.

Many students struggle to make the required word count for an essay and resort to padding their writing with redundant statements. Instead of adding unnecessary content, focus on expanding your analysis to provide deeper insights.

A good essay, regardless of the topic or format, needs to be streamlined. It should convey clear, convincing, relevant information supporting your thesis. If you find some information doesn’t do that, consider tweaking your sources.

Include a variety of sources, including studies, data, and quotes from scholars or other experts. Remember, you’re not just strengthening your argument but demonstrating the depth of your research.

If you want comprehensive feedback on your essay without going to a writing center or pestering your professor, use Smodin. The AI Chat can look at your draft and offer suggestions for improvement.

7. Revise, Cite, and Submit

The final stages of crafting a research paper involve revision, citation, and final review. You must ensure your paper is polished, professionally presented, and plagiarism-free. Of course, integrating Smodin’s AI tools can significantly streamline this process and enhance the quality of your final submission.

Start by using Smodin’s Rewriter tool. This AI-powered feature can help rephrase and refine your draft to improve overall readability. If a specific section of your essay just “doesn’t sound right,” the AI can suggest alternative sentence structures and word choices.

Proper citation is a must for all academic papers. Thankfully, thanks to Smodin’s Research Paper app, this once tedious process is easier than ever. The AI ensures all sources are accurately cited according to the required style guide (APA, MLA, Chicago, etc.).

Plagiarism Checker:

All students need to realize that accidental plagiarism can happen. That’s why using a Plagiarism Checker to scan your essay before you submit it is always useful. Smodin’s Plagiarism Checker can highlight areas of concern so you can adjust accordingly.

Final Submission

After revising, rephrasing, and ensuring all citations are in order, use Smodin’s AI Content Detector to give your paper one last review. This tool can help you analyze your paper’s overall quality and readability so you can make any final tweaks or improvements.

Mastering Research Papers

Mastering the art of the research paper cannot be overstated, whether you’re in high school, college, or postgraduate studies. You can confidently prepare your research paper for submission by leveraging the AI tools listed above.

Research papers help refine your abilities to think critically and write persuasively. The skills you develop here will serve you well beyond the walls of the classroom. Communicating complex ideas clearly and effectively is one of the most powerful tools you can possess.

With the advancements of AI tools like Smodin , writing a research paper has become more accessible than ever before. These technologies streamline the process of organizing, writing, and revising your work. Write with confidence, knowing your best work is yet to come!

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

Common Writing Assignments

OWL logo

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

These OWL resources will help you understand and complete specific types of writing assignments, such as annotated bibliographies, book reports, and research papers. This section also includes resources on writing academic proposals for conference presentations, journal articles, and books.

Understanding Writing Assignments

This resource describes some steps you can take to better understand the requirements of your writing assignments. This resource works for either in-class, teacher-led discussion or for personal use.

Argument Papers

This resource outlines the generally accepted structure for introductions, body paragraphs, and conclusions in an academic argument paper. Keep in mind that this resource contains guidelines and not strict rules about organization. Your structure needs to be flexible enough to meet the requirements of your purpose and audience.

Research Papers

This handout provides detailed information about how to write research papers including discussing research papers as a genre, choosing topics, and finding sources.

Exploratory Papers

This resource will help you with exploratory/inquiry essay assignments.

Annotated Bibliographies

This handout provides information about annotated bibliographies in MLA, APA, and CMS.

Book Report

This resource discusses book reports and how to write them.

Definitions

This handout provides suggestions and examples for writing definitions.

Essays for Exams

While most OWL resources recommend a longer writing process (start early, revise often, conduct thorough research, etc.), sometimes you just have to write quickly in test situations. However, these exam essays can be no less important pieces of writing than research papers because they can influence final grades for courses, and/or they can mean the difference between getting into an academic program (GED, SAT, GRE). To that end, this resource will help you prepare and write essays for exams.

Book Review

This resource discusses book reviews and how to write them.

Academic Proposals

This resource will help undergraduate, graduate, and professional scholars write proposals for academic conferences, articles, and books.

In this section

Subsections.

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • View all journals
  • Explore content
  • About the journal
  • Publish with us
  • Sign up for alerts
  • Published: 08 May 2024

Accurate structure prediction of biomolecular interactions with AlphaFold 3

  • Josh Abramson   ORCID: orcid.org/0009-0000-3496-6952 1   na1 ,
  • Jonas Adler   ORCID: orcid.org/0000-0001-9928-3407 1   na1 ,
  • Jack Dunger 1   na1 ,
  • Richard Evans   ORCID: orcid.org/0000-0003-4675-8469 1   na1 ,
  • Tim Green   ORCID: orcid.org/0000-0002-3227-1505 1   na1 ,
  • Alexander Pritzel   ORCID: orcid.org/0000-0002-4233-9040 1   na1 ,
  • Olaf Ronneberger   ORCID: orcid.org/0000-0002-4266-1515 1   na1 ,
  • Lindsay Willmore   ORCID: orcid.org/0000-0003-4314-0778 1   na1 ,
  • Andrew J. Ballard   ORCID: orcid.org/0000-0003-4956-5304 1 ,
  • Joshua Bambrick   ORCID: orcid.org/0009-0003-3908-0722 2 ,
  • Sebastian W. Bodenstein 1 ,
  • David A. Evans 1 ,
  • Chia-Chun Hung   ORCID: orcid.org/0000-0002-5264-9165 2 ,
  • Michael O’Neill 1 ,
  • David Reiman   ORCID: orcid.org/0000-0002-1605-7197 1 ,
  • Kathryn Tunyasuvunakool   ORCID: orcid.org/0000-0002-8594-1074 1 ,
  • Zachary Wu   ORCID: orcid.org/0000-0003-2429-9812 1 ,
  • Akvilė Žemgulytė 1 ,
  • Eirini Arvaniti 3 ,
  • Charles Beattie   ORCID: orcid.org/0000-0003-1840-054X 3 ,
  • Ottavia Bertolli   ORCID: orcid.org/0000-0001-8578-3216 3 ,
  • Alex Bridgland 3 ,
  • Alexey Cherepanov   ORCID: orcid.org/0000-0002-5227-0622 4 ,
  • Miles Congreve 4 ,
  • Alexander I. Cowen-Rivers 3 ,
  • Andrew Cowie   ORCID: orcid.org/0000-0002-4491-1434 3 ,
  • Michael Figurnov   ORCID: orcid.org/0000-0003-1386-8741 3 ,
  • Fabian B. Fuchs 3 ,
  • Hannah Gladman 3 ,
  • Rishub Jain 3 ,
  • Yousuf A. Khan   ORCID: orcid.org/0000-0003-0201-2796 3 ,
  • Caroline M. R. Low 4 ,
  • Kuba Perlin 3 ,
  • Anna Potapenko 3 ,
  • Pascal Savy 4 ,
  • Sukhdeep Singh 3 ,
  • Adrian Stecula   ORCID: orcid.org/0000-0001-6914-6743 4 ,
  • Ashok Thillaisundaram 3 ,
  • Catherine Tong   ORCID: orcid.org/0000-0001-7570-4801 4 ,
  • Sergei Yakneen   ORCID: orcid.org/0000-0001-7827-9839 4 ,
  • Ellen D. Zhong   ORCID: orcid.org/0000-0001-6345-1907 3 ,
  • Michal Zielinski 3 ,
  • Augustin Žídek   ORCID: orcid.org/0000-0002-0748-9684 3 ,
  • Victor Bapst 1   na2 ,
  • Pushmeet Kohli   ORCID: orcid.org/0000-0002-7466-7997 1   na2 ,
  • Max Jaderberg   ORCID: orcid.org/0000-0002-9033-2695 2   na2 ,
  • Demis Hassabis   ORCID: orcid.org/0000-0003-2812-9917 1 , 2   na2 &
  • John M. Jumper   ORCID: orcid.org/0000-0001-6169-6580 1   na2  

Nature ( 2024 ) Cite this article

230k Accesses

1 Citations

1175 Altmetric

Metrics details

We are providing an unedited version of this manuscript to give early access to its findings. Before final publication, the manuscript will undergo further editing. Please note there may be errors present which affect the content, and all legal disclaimers apply.

  • Drug discovery
  • Machine learning
  • Protein structure predictions
  • Structural biology

The introduction of AlphaFold 2 1 has spurred a revolution in modelling the structure of proteins and their interactions, enabling a huge range of applications in protein modelling and design 2–6 . In this paper, we describe our AlphaFold 3 model with a substantially updated diffusion-based architecture, which is capable of joint structure prediction of complexes including proteins, nucleic acids, small molecules, ions, and modified residues. The new AlphaFold model demonstrates significantly improved accuracy over many previous specialised tools: far greater accuracy on protein-ligand interactions than state of the art docking tools, much higher accuracy on protein-nucleic acid interactions than nucleic-acid-specific predictors, and significantly higher antibody-antigen prediction accuracy than AlphaFold-Multimer v2.3 7,8 . Together these results show that high accuracy modelling across biomolecular space is possible within a single unified deep learning framework.

You have full access to this article via your institution.

Similar content being viewed by others

guide to write introduction for research paper

Highly accurate protein structure prediction with AlphaFold

guide to write introduction for research paper

De novo generation of multi-target compounds using deep generative chemistry

guide to write introduction for research paper

Augmenting large language models with chemistry tools

Author information.

These authors contributed equally: Josh Abramson, Jonas Adler, Jack Dunger, Richard Evans, Tim Green, Alexander Pritzel, Olaf Ronneberger, Lindsay Willmore

These authors jointly supervised this work: Victor Bapst, Pushmeet Kohli, Max Jaderberg, Demis Hassabis, John M. Jumper

Authors and Affiliations

Core Contributor, Google DeepMind, London, UK

Josh Abramson, Jonas Adler, Jack Dunger, Richard Evans, Tim Green, Alexander Pritzel, Olaf Ronneberger, Lindsay Willmore, Andrew J. Ballard, Sebastian W. Bodenstein, David A. Evans, Michael O’Neill, David Reiman, Kathryn Tunyasuvunakool, Zachary Wu, Akvilė Žemgulytė, Victor Bapst, Pushmeet Kohli, Demis Hassabis & John M. Jumper

Core Contributor, Isomorphic Labs, London, UK

Joshua Bambrick, Chia-Chun Hung, Max Jaderberg & Demis Hassabis

Google DeepMind, London, UK

Eirini Arvaniti, Charles Beattie, Ottavia Bertolli, Alex Bridgland, Alexander I. Cowen-Rivers, Andrew Cowie, Michael Figurnov, Fabian B. Fuchs, Hannah Gladman, Rishub Jain, Yousuf A. Khan, Kuba Perlin, Anna Potapenko, Sukhdeep Singh, Ashok Thillaisundaram, Ellen D. Zhong, Michal Zielinski & Augustin Žídek

Isomorphic Labs, London, UK

Alexey Cherepanov, Miles Congreve, Caroline M. R. Low, Pascal Savy, Adrian Stecula, Catherine Tong & Sergei Yakneen

You can also search for this author in PubMed   Google Scholar

Corresponding authors

Correspondence to Max Jaderberg , Demis Hassabis or John M. Jumper .

Supplementary information

Supplementary information.

This Supplementary Information file contains the following 9 sections: (1) Notation; (2) Data pipeline; (3) Model architecture; (4) Auxiliary heads; (5) Training and inference; (6) Evaluation; (7) Differences to AlphaFold2 and AlphaFold-Multimer; (8) Supplemental Results; and (9) Appendix: CCD Code and PDB ID tables.

Reporting Summary

Rights and permissions.

Reprints and permissions

About this article

Cite this article.

Abramson, J., Adler, J., Dunger, J. et al. Accurate structure prediction of biomolecular interactions with AlphaFold 3. Nature (2024). https://doi.org/10.1038/s41586-024-07487-w

Download citation

Received : 19 December 2023

Accepted : 29 April 2024

Published : 08 May 2024

DOI : https://doi.org/10.1038/s41586-024-07487-w

Share this article

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

This article is cited by

Major alphafold upgrade offers boost for drug discovery.

  • Ewen Callaway

Nature (2024)

By submitting a comment you agree to abide by our Terms and Community Guidelines . If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Quick links

  • Explore articles by subject
  • Guide to authors
  • Editorial policies

Sign up for the Nature Briefing: Translational Research newsletter — top stories in biotechnology, drug discovery and pharma.

guide to write introduction for research paper

IMAGES

  1. A Complete Guide on How to Write an Introduction for a Research Paper

    guide to write introduction for research paper

  2. How to Write a Research Paper Introduction in 4 Steps

    guide to write introduction for research paper

  3. How to write an academic introduction / Academic English UK

    guide to write introduction for research paper

  4. How to Write a Research Paper Introduction Paragraph

    guide to write introduction for research paper

  5. How to Write A Perfect Research Paper Introduction

    guide to write introduction for research paper

  6. A Short Guide Of How To Write A Research Paper Outline

    guide to write introduction for research paper

VIDEO

  1. Online Workshop on Research Paper Writing & Publishing Day 1

  2. Online Workshop on Research Paper Writing & Publishing Day 2

  3. How To Write A Research Paper For School

  4. How to Write a research paper Introduction Using MyWordAi

  5. Research Methodology: How To Write Research Paper in Hindi Manuscript Writing Skill

  6. How to write an introduction?

COMMENTS

  1. Writing a Research Paper Introduction

    Table of contents. Step 1: Introduce your topic. Step 2: Describe the background. Step 3: Establish your research problem. Step 4: Specify your objective (s) Step 5: Map out your paper. Research paper introduction examples. Frequently asked questions about the research paper introduction.

  2. Research Paper Introduction

    Research Paper Introduction. Research paper introduction is the first section of a research paper that provides an overview of the study, its purpose, and the research question(s) or hypothesis(es) being investigated. It typically includes background information about the topic, a review of previous research in the field, and a statement of the research objectives.

  3. How to Write a Research Paper Introduction (with Examples)

    The research paper introduction section, along with the Title and Abstract, can be considered the face of any research paper. The following article is intended to guide you in organizing and writing the research paper introduction for a quality academic article or dissertation. The research paper introduction aims to present the topic to the ...

  4. How to Write an Introduction for a Research Paper

    A commonly recommended length of a research paper introduction is around 10% of the total paper's length. So, a ten-page paper has a one-page introduction. ... Like every piece of writing, a research paper should be written for the audience. That is to say, it should match the tone and style that your academic discipline and target audience ...

  5. 4. The Introduction

    The introduction leads the reader from a general subject area to a particular topic of inquiry. It establishes the scope, context, and significance of the research being conducted by summarizing current understanding and background information about the topic, stating the purpose of the work in the form of the research problem supported by a hypothesis or a set of questions, explaining briefly ...

  6. How to Write an Essay Introduction

    Table of contents. Step 1: Hook your reader. Step 2: Give background information. Step 3: Present your thesis statement. Step 4: Map your essay's structure. Step 5: Check and revise. More examples of essay introductions. Other interesting articles. Frequently asked questions about the essay introduction.

  7. How to Write an Introduction for a Research Paper

    When writing your research paper introduction, there are several key elements you should include to ensure it is comprehensive and informative. A hook or attention-grabbing statement to capture the reader's interest. It can be a thought-provoking question, a surprising statistic, or a compelling anecdote that relates to your research topic.

  8. Introductions

    1. The placeholder introduction. When you don't have much to say on a given topic, it is easy to create this kind of introduction. Essentially, this kind of weaker introduction contains several sentences that are vague and don't really say much. They exist just to take up the "introduction space" in your paper.

  9. Introductions

    In general, your introductions should contain the following elements: When you're writing an essay, it's helpful to think about what your reader needs to know in order to follow your argument. Your introduction should include enough information so that readers can understand the context for your thesis. For example, if you are analyzing ...

  10. How to Write an Introduction for a Research Paper

    After you've done some extra polishing, I suggest a simple test for the introductory section. As an experiment, chop off the first few paragraphs. Let the paper begin on, say, paragraph 2 or even page 2. If you don't lose much, or actually gain in clarity and pace, then you've got a problem. There are two solutions.

  11. How To Write A Research Paper (FREE Template

    We've covered a lot of ground here. To recap, the three steps to writing a high-quality research paper are: To choose a research question and review the literature. To plan your paper structure and draft an outline. To take an iterative approach to writing, focusing on critical writing and strong referencing.

  12. Toolkit: How to write a great paper

    A clear format will ensure that your research paper is understood by your readers. Follow: 1. Context — your introduction. 2. Content — your results. 3. Conclusion — your discussion. Plan ...

  13. PDF Student Paper Setup Guide, APA Style 7th Edition

    Indent the first line of every paragraph of text 0.5 in. using the tab key or the paragraph-formatting function of your word-processing program. Page numbers: Put a page number in the top right corner of every page, including the title page or cover page, which is page 1. Student papers do not require a running head on any page.

  14. Writing a Research Paper

    The pages in this section cover the following topic areas related to the process of writing a research paper: Genre - This section will provide an overview for understanding the difference between an analytical and argumentative research paper. Choosing a Topic - This section will guide the student through the process of choosing topics ...

  15. Research Paper

    The introduction section of a research paper provides background information about the research problem, the research question, and the research objectives. ... You can write Research Paper by the following guide: Choose a Topic: The first step is to select a topic that interests you and is relevant to your field of study. Brainstorm ideas and ...

  16. PDF Strategies for Essay Writing

    Harvard College Writing Center 2 Tips for Reading an Assignment Prompt When you receive a paper assignment, your first step should be to read the assignment prompt carefully to make sure you understand what you are being asked to do. Sometimes your assignment will be open-ended ("write a paper about anything in the course that interests you").

  17. How to Write Your First Research Paper

    After you get enough feedback and decide on the journal you will submit to, the process of real writing begins. Copy your outline into a separate file and expand on each of the points, adding data and elaborating on the details. When you create the first draft, do not succumb to the temptation of editing.

  18. (PDF) How to Write an Introduction for Research

    The key thing is. to guide the reader into your topic and situate your ideas. Step 2: Describe the background. This part of the introduction differs depending on what approach your paper is ...

  19. How to Write a College Paper: Step-by-Step Guide for Students

    Creating an Outline. An outline serves as a roadmap for your paper, helping you organize your thoughts and structure your arguments. Start with a basic structure: introduction, body paragraphs, and conclusion. Expand each section with bullet points detailing the main ideas and supporting evidence you plan to include.

  20. How to Write a Research Paper

    You can adjust this outline to fit your research findings better and ensure that your paper remains well-organized and focused. 5. Write a Rough Draft. Once your outline is in place, you can begin the writing process. Remember, when you write a rough draft, it isn't meant to be perfect.

  21. Common Writing Assignments Introduction

    Common Writing Assignments. These OWL resources will help you understand and complete specific types of writing assignments, such as annotated bibliographies, book reports, and research papers. This section also includes resources on writing academic proposals for conference presentations, journal articles, and books.

  22. Accurate structure prediction of biomolecular interactions with

    The introduction of AlphaFold 21 has spurred a revolution in modelling the structure of proteins and their interactions, enabling a huge range of applications in protein modelling and design2-6.

  23. Report Writing Format with Templates and Sample Report

    2. Follow the Right Report Writing Format: Adhere to a structured format, including a clear title, table of contents, summary, introduction, body, conclusion, recommendations, and appendices. This ensures clarity and coherence. Follow the format suggestions in this article to start off on the right foot. 3.

  24. How to Write a White Paper in 10 Steps (+ Tips & Templates)

    Step 2: Conduct Thorough Research. Once you've chosen your topic, it's time to collect information and data to create insightful content that delivers actual value. You can use both internal and external sources to gather information for your white paper.