abstract for master thesis

• How to Write an Abstract for a Dissertation or Thesis
• Doing a PhD

What is a Thesis or Dissertation Abstract?

The Cambridge English Dictionary defines an abstract in academic writing as being “ a few sentences that give the main ideas in an article or a scientific paper ” and the Collins English Dictionary says “ an abstract of an article, document, or speech is a short piece of writing that gives the main points of it ”.

Whether you’re writing up your Master’s dissertation or PhD thesis, the abstract will be a key element of this document that you’ll want to make sure you give proper attention to.

What is the Purpose of an Abstract?

The aim of a thesis abstract is to give the reader a broad overview of what your research project was about and what you found that was novel, before he or she decides to read the entire thesis. The reality here though is that very few people will read the entire thesis, and not because they’re necessarily disinterested but because practically it’s too large a document for most people to have the time to read. The exception to this is your PhD examiner, however know that even they may not read the entire length of the document.

Some people may still skip to and read specific sections throughout your thesis such as the methodology, but the fact is that the abstract will be all that most read and will therefore be the section they base their opinions about your research on. In short, make sure you write a good, well-structured abstract.

How Long Should an Abstract Be?

If you’re a PhD student, having written your 100,000-word thesis, the abstract will be the 300 word summary included at the start of the thesis that succinctly explains the motivation for your study (i.e. why this research was needed), the main work you did (i.e. the focus of each chapter), what you found (the results) and concluding with how your research study contributed to new knowledge within your field.

Woodrow Wilson, the 28th President of the United States of America, once famously said:

The point here is that it’s easier to talk open-endedly about a subject that you know a lot about than it is to condense the key points into a 10-minute speech; the same applies for an abstract. Three hundred words is not a lot of words which makes it even more difficult to condense three (or more) years of research into a coherent, interesting story.

What Makes a Good PhD Thesis Abstract?

Whilst the abstract is one of the first sections in your PhD thesis, practically it’s probably the last aspect that you’ll ending up writing before sending the document to print. The reason being that you can’t write a summary about what you did, what you found and what it means until you’ve done the work.

A good abstract is one that can clearly explain to the reader in 300 words:

• What your research field actually is,
• What the gap in knowledge was in your field,
• The overarching aim and objectives of your PhD in response to these gaps,
• What methods you employed to achieve these,
• You key results and findings,
• How your work has added to further knowledge in your field of study.

Another way to think of this structure is:

• Introduction,
• Aims and objectives,
• Discussion,
• Conclusion.

Following this ‘formulaic’ approach to writing the abstract should hopefully make it a little easier to write but you can already see here that there’s a lot of information to convey in a very limited number of words.

How Do You Write a Good PhD Thesis Abstract?

The biggest challenge you’ll have is getting all the 6 points mentioned above across in your abstract within the limit of 300 words . Your particular university may give some leeway in going a few words over this but it’s good practice to keep within this; the art of succinctly getting your information across is an important skill for a researcher to have and one that you’ll be called on to use regularly as you write papers for peer review.

Keep It Concise

Every word in the abstract is important so make sure you focus on only the key elements of your research and the main outcomes and significance of your project that you want the reader to know about. You may have come across incidental findings during your research which could be interesting to discuss but this should not happen in the abstract as you simply don’t have enough words. Furthermore, make sure everything you talk about in your thesis is actually described in the main thesis.

Make a Unique Point Each Sentence

Keep the sentences short and to the point. Each sentence should give the reader new, useful information about your research so there’s no need to write out your project title again. Give yourself one or two sentences to introduce your subject area and set the context for your project. Then another sentence or two to explain the gap in the knowledge; there’s no need or expectation for you to include references in the abstract.

Explain Your Research

Some people prefer to write their overarching aim whilst others set out their research questions as they correspond to the structure of their thesis chapters; the approach you use is up to you, as long as the reader can understand what your dissertation or thesis had set out to achieve. Knowing this will help the reader better understand if your results help to answer the research questions or if further work is needed.

Keep It Factual

Keep the content of the abstract factual; that is to say that you should avoid bringing too much or any opinion into it, which inevitably can make the writing seem vague in the points you’re trying to get across and even lacking in structure.

Write, Edit and Then Rewrite

Spend suitable time editing your text, and if necessary, completely re-writing it. Show the abstract to others and ask them to explain what they understand about your research – are they able to explain back to you each of the 6 structure points, including why your project was needed, the research questions and results, and the impact it had on your research field? It’s important that you’re able to convey what new knowledge you contributed to your field but be mindful when writing your abstract that you don’t inadvertently overstate the conclusions, impact and significance of your work.

Thesis and Dissertation Abstract Examples

Perhaps the best way to understand how to write a thesis abstract is to look at examples of what makes a good and bad abstract.

Example of A Bad Abstract

Let’s start with an example of a bad thesis abstract:

In this project on “The Analysis of the Structural Integrity of 3D Printed Polymers for use in Aircraft”, my research looked at how 3D printing of materials can help the aviation industry in the manufacture of planes. Plane parts can be made at a lower cost using 3D printing and made lighter than traditional components. This project investigated the structural integrity of EBM manufactured components, which could revolutionise the aviation industry.

What Makes This a Bad Abstract

Hopefully you’ll have spotted some of the reasons this would be considered a poor abstract, not least because the author used up valuable words by repeating the lengthy title of the project in the abstract.

Working through our checklist of the 6 key points you want to convey to the reader:

• There has been an attempt to introduce the research area , albeit half-way through the abstract but it’s not clear if this is a materials science project about 3D printing or is it about aircraft design.
• There’s no explanation about where the gap in the knowledge is that this project attempted to address.
• We can see that this project was focussed on the topic of structural integrity of materials in aircraft but the actual research aims or objectives haven’t been defined.
• There’s no mention at all of what the author actually did to investigate structural integrity. For example was this an experimental study involving real aircraft, or something in the lab, computer simulations etc.
• The author also doesn’t tell us a single result of his research, let alone the key findings !
• There’s a bold claim in the last sentence of the abstract that this project could revolutionise the aviation industry, and this may well be the case, but based on the abstract alone there is no evidence to support this as it’s not even clear what the author did .

This is an extreme example but is a good way to illustrate just how unhelpful a poorly written abstract can be. At only 71 words long, it definitely hasn’t maximised the amount of information that could be presented and the what they have presented has lacked clarity and structure.

A final point to note is the use of the EBM acronym, which stands for Electron Beam Melting in the context of 3D printing; this is a niche acronym for the author to assume that the reader would know the meaning of. It’s best to avoid acronyms in your abstract all together even if it’s something that you might expect most people to know about, unless you specifically define the meaning first.

Example of A Good Abstract

Having seen an example of a bad thesis abstract, now lets look at an example of a good PhD thesis abstract written about the same (fictional) project:

Additive manufacturing (AM) of titanium alloys has the potential to enable cheaper and lighter components to be produced with customised designs for use in aircraft engines. Whilst the proof-of-concept of these have been promising, the structural integrity of AM engine parts in response to full thrust and temperature variations is not clear.

The primary aim of this project was to determine the fracture modes and mechanisms of AM components designed for use in Boeing 747 engines. To achieve this an explicit finite element (FE) model was developed to simulate the environment and parameters that the engine is exposed to during flight. The FE model was validated using experimental data replicating the environmental parameters in a laboratory setting using ten AM engine components provided by the industry sponsor. The validated FE model was then used to investigate the extent of crack initiation and propagation as the environment parameters were adjusted.

This project was the first to investigate fracture patterns in AM titanium components used in aircraft engines; the key finding was that the presence of cavities within the structures due to errors in the printing process, significantly increased the risk of fracture. Secondly, the simulations showed that cracks formed within AM parts were more likely to worsen and lead to component failure at subzero temperatures when compared to conventionally manufactured parts. This has demonstrated an important safety concern which needs to be addressed before AM parts can be used in commercial aircraft.

What Makes This a Good Abstract

Having read this ‘good abstract’ you should have a much better understand about what the subject area is about, where the gap in the knowledge was, the aim of the project, the methods that were used, key results and finally the significance of these results. To break these points down further, from this good abstract we now know that:

• The research area is around additive manufacturing (i.e. 3D printing) of materials for use in aircraft.
• The gap in knowledge was how these materials will behave structural when used in aircraft engines.
• The aim was specifically to investigate how the components can fracture.
• The methods used to investigate this were a combination of computational and lab based experimental modelling.
• The key findings were the increased risk of fracture of these components due to the way they are manufactured.
• The significance of these findings were that it showed a potential risk of component failure that could comprise the safety of passengers and crew on the aircraft.

The abstract text has a much clearer flow through these different points in how it’s written and has made much better use of the available word count. Acronyms have even been used twice in this good abstract but they were clearly defined the first time they were introduced in the text so that there was no confusion about their meaning.

The abstract you write for your dissertation or thesis should succinctly explain to the reader why the work of your research was needed, what you did, what you found and what it means. Most people that come across your thesis, including any future employers, are likely to read only your abstract. Even just for this reason alone, it’s so important that you write the best abstract you can; this will not only convey your research effectively but also put you in the best light possible as a researcher.

Browse PhDs Now

Join thousands of students.

Join thousands of other students and stay up to date with the latest PhD programmes, funding opportunities and advice.

• Dissertation & Thesis Guides
• Basics of Dissertation & Thesis Writing
• How to Write an Abstract for a Dissertation or Thesis: Guide & Examples
• Speech Topics
• Basics of Essay Writing
• Essay Topics
• Other Essays
• Main Academic Essays
• Research Paper Topics
• Basics of Research Paper Writing
• Miscellaneous
• Chicago/ Turabian
• Data & Statistics
• Methodology
• Admission Writing Tips
• Admission Advice
• Other Guides
• Student Life
• Studying Tips
• Understanding Plagiarism
• Academic Writing Tips

• Essay Guides
• Research Paper Guides
• Formatting Guides
• Basics of Research Process
• Admission Guides

How to Write an Abstract for a Dissertation or Thesis: Guide & Examples

Table of contents

Use our free Readability checker

A dissertation abstract is a brief summary of a dissertation, typically between 150-300 words. It is a standalone piece of writing that gives the reader an overview of the main ideas and findings of the dissertation.

Generally, this section should include:

• Research problem and questions
• Research methodology
• Key findings and results
• Original contribution
• Practical or theoretical implications.

You need to write an excellent abstract for a dissertation or thesis, since it's the first thing a comitteee will review. Continue reading through to learn how to write a dissertation abstract. In this article, we will discuss its purpose, length, structure and writing steps. Moreover, for reference purposes, this article will include abstract examples for a dissertation and thesis and offer extra guidance on top of that.

In case you are in a hurry, feel free to buy dissertation from our professional writers. Our experts are qualified and have solid experience in writing Ph.D. academic works.

What Is a Dissertation Abstract?

Dissertation abstracts, by definition, are summaries of a thesis's content, usually between 200 and 300 words, used to inform readers about the contents of the study in a quick way. A thesis or dissertation abstract briefly overviews the entire thesis. Dissertation abstracts are found at the beginning of every study, providing the research recap, results, and conclusions. It usually goes right after your title page and before your dissertation table of contents . An abstract for a dissertation (alternatively called “précis” further in the article) should clearly state the main topic of your paper, its overall purpose, and any important research questions or findings. It should also contain any necessary keywords that direct readers to relevant information. In addition, it addresses any implications for further research that may stem from its field. Writing strong précis requires you to think carefully, as they are the critical components that attract readers to peruse your paper.

Purpose of a Dissertation or Thesis Abstract

The primary purpose of an abstract in a dissertation or thesis is to give readers a basic understanding of the completed work. Also, it should create an interest in the topic to motivate readers to read further. Writing an abstract for a dissertation is essential for many reasons: 

• Offers a summary and gives readers an overview of what they should expect from your study.
• Provides an opportunity to showcase the research done, highlighting its importance and impact.
• Identifies any unexplored research gaps to inform future studies and direct the current state of knowledge on the topic.

In general, an abstract of a thesis or a dissertation is a bridge between the research and potential readers.

What Makes a Good Abstract for a Dissertation?

Making a good dissertation abstract requires excellent organization and clarity of thought. Proper specimens must provide convincing arguments supporting your thesis. Writing an effective dissertation abstract requires students to be concise and write engagingly. Below is a list of things that makes it outstanding:

• Maintains clear and concise summary style
• Includes essential keywords for search engine optimization
• Accurately conveys the scope of the thesis
• Strictly adheres to the word count limit specified in your instructions
• Written from a third-person point of view
• Includes objectives, approach, and findings
• Uses simple language without jargon
• Avoids overgeneralized statements or vague claims.

How Long Should a Dissertation Abstract Be?

Abstracts should be long enough to convey the key points of every thesis, yet brief enough to capture readers' attention. A dissertation abstract length should typically be between 200-300 words, i.e., 1 page. But usually, length is indicated in the requirements. Remember that your primary goal here is to provide an engaging and informative thesis summary. Note that following the instructions and templates set forth by your university will ensure your thesis or dissertation abstract meets the writing criteria and adheres to all relevant standards.

Dissertation Abstract Structure

Dissertation abstracts can be organized in different ways and vary slightly depending on your work requirements. However, each abstract of a dissertation should incorporate elements like keywords, methods, results, and conclusions. The structure of a thesis or a dissertation abstract should account for the components included below:

• Title Accurately reflects the topic of your thesis.
• Introduction Provides an overview of your research, its purpose, and any relevant background information.
• Methods/ Approach Gives an outline of the methods used to conduct your research.
• Results Summarizes your findings.
• Conclusions Provides an overview of your research's accomplishments and implications.
• Keywords Includes keywords that accurately describe your thesis.

Below is an example that shows how a dissertation abstract looks, how to structure it and where each part is located. Use this template to organize your own summary. 

Things to Consider Before Writing a Dissertation Abstract

There are several things you should do beforehand in order to write a good abstract for a dissertation or thesis. They include:

• Reviewing set requirements and making sure you clearly understand the expectations
• Reading other research works to get an idea of what to include in yours
• Writing a few drafts before submitting your final version, which will ensure that it's in the best state possible.

Write an Abstract for a Dissertation Last

Remember, it's advisable to write an abstract for a thesis paper or dissertation last. Even though it’s always located in the beginning of the work, nevertheless, it should be written last. This way, your summary will be more accurate because the main argument and conclusions are already known when the work is mostly finished - it is incomparably easier to write a dissertation abstract after completing your thesis. Additionally, you should write it last because the contents and scope of the thesis may have changed during the writing process. So, create your dissertation abstract as a last step to help ensure that it precisely reflects the content of your project.

Carefully Read Requirements

Writing dissertation abstracts requires careful attention to details and adherence to writing requirements. Refer to the rubric or guidelines that you were presented with to identify aspects to keep in mind and important elements, such as correct length and writing style, and then make sure to comprehensively include them. Careful consideration of these requirements ensures that your writing meets every criterion and standard provided by your supervisor to increase the chances that your master's thesis is accepted and approved.   

Choose the Right Type of Dissertation Abstracts

Before starting to write a dissertation or thesis abstract you should choose the appropriate type. Several options are available, and it is essential to pick one that best suits your dissertation's subject. Depending on their purpose, there exist 3 types of dissertation abstracts: 

• Informative
• Descriptive

Informative one offers readers a concise overview of your research, its purpose, and any relevant background information. Additionally, this type includes brief summaries of all results and dissertation conclusions .  A descriptive abstract in a dissertation or thesis provides a quick overview of the research, but it doesn't incorporate any evaluation or analysis because it only offers a snapshot of the study and makes no claims.

Critical abstract gives readers an in-depth overview of the research and include an evaluative component. This means that this type also summarizes and analyzes research data, discusses implications, and makes claims about the achievements of your study. In addition, it examines the research data and recounts its implications. 

Choose the correct type of dissertation abstract to ensure that it meets your paper’s demands.

How to Write an Abstract for a Dissertation or Thesis?

Writing a good abstract for a dissertation or thesis is essential as it provides a brief overview of the completed research. So, how to write a dissertation abstract? First of all, the right approach is dictated by an institution's specific requirements. However, a basic structure should include the title, an introduction to your topic, research methodology, findings, and conclusions. Composing noteworthy precis allows you to flaunt your capabilities and grants readers a concise glimpse of the research. Doing this can make an immense impact on those reviewing your paper.

1. Identify the Purpose of Your Study

An abstract for thesis paper or dissertation is mainly dependent on the purpose of your study. Students need to identify all goals and objectives of their research before writing their précis - the reason being to ensure that the investigation’s progress and all its consequent findings are described simply and intelligibly. Additionally, one should provide some background information about their study. A short general description helps your reader acknowledge and connect with the research question. But don’t dive too deep into details, since more details are provided when writing a dissertation introduction . Scholars should write every dissertation abstract accurately and in a coherent way to demonstrate their knowledge and understanding of the area. This is the first section that potential readers will see, and it should serve as a precise overview of an entire document. Therefore, researchers writing abstracts of a thesis or dissertation should do it with great care and attention to details.

2. Discuss Methodology

A writer needs to elaborate on their methodological approach in an abstract of PhD dissertation since it acts as a brief summary of a whole research and should include an explanation of all methods used there. Dissertation and thesis abstracts discuss the research methodology by providing information sufficient enough to understand the underlying research question, data collection methods, and approach employed. Additionally, they should explain the analysis or interpretation of the data. This will help readers to gain a much better understanding of the research process and allow them to evaluate the data quality. Mention whether your methodology is quantitative or qualitative since this information is essential for readers to grasp your study's context and scope. Additionally, comment on the sources used and any other evidence collected. Furthermore, explain why you chose the method in the first place. All in all, addressing methodology is a crucial part of writing abstracts of a thesis or dissertation, as it will allow people to understand exactly how you arrived at your conclusions.

3. Describe the Key Results

Write your abstract for dissertation in a way that includes an overview of the research problem, your proposed solution, and any limitations or constraints you faced. Students need to briefly and clearly describe all key findings from the research. You must ensure that the results mentioned in an abstract of a thesis or dissertation are supported with evidence from body chapters.  Write about any crucial trends or patterns that emerged from the study. They should be discussed in detail, as this information can often provide valuable insight into your topic. Be sure to include any correlations or relationships found as a result of the study. Correlation, in this context, refers to any association between two or more variables.  Finally, write about any implications or conclusions drawn from your results: this is an essential element when writing an abstract for dissertation since it allows readers to firmly comprehend the study’s significance.

4. Summarize an Abstract for a Dissertation

Knowing how to write an abstract for dissertation is critical in conveying your work to a broad audience. Summarizing can be challenging (since precis is a summary in itself), but it is an essential part of any successful work. So, as a final step, conclude this section with a brief overview of the topic, outline the course of your research and its main results, and answer the paper’s central question.  Summarizing an abstract of your dissertation is done to give readers a succinct impression of the entire paper, making an accurate and concise overview of all its key points and consequent conclusions. In every PhD dissertation abstract , wrap up its summary by addressing any unanswered questions and discussing any potential implications of the research.

How to Format an Abstract in Dissertation

Format depends on the style (APA, MLA, Harvard, Chicago), which varies according to your subject's discipline. Style to use is usually mentioned in the instructions, and students should follow them closely to ensure formatting accuracy. These styles have guidelines that inform you about the formatting of titles, headings and subheadings, margins, page numbers, abstracts, and tell what font size and family or line spacing are required. Using a consistent formatting style ensures proper readability and might even influence paper’s overall structure. Another formatting concern to consider when writing dissertation and thesis abstracts is their layout. Most commonly, your paper should have a one-inch margin on all sides with double spacing. Be sure to familiarize yourself with the right guidelines to get the correct information on how to write dissertation abstract in APA format and ensure that it meets formatting standards.

Keywords in a Dissertation Abstract

When writing thesis abstracts, it is essential to include keywords. Keywords are phrases or words that help readers identify main topics of your paper and make it easier for them to find any information they need. Keywords should usually be placed at the end of a dissertation abstract and written in italics. In addition, include keywords that represent your paper's primary research interests and topics. Lastly, use keywords throughout your thesis to ensure that your précis accurately reflect an entire paper's content.

Thesis and Dissertation Abstract Examples

When writing, checking out thesis and dissertation abstracts examples from experts can provide a valuable reference point for structuring and formatting your own précis. When searching for an excellent sample template, engaging the assistance of a professional writer can be highly beneficial. Their expertise and knowledge offer helpful insight into creating an exemplary document that exceeds all expectations. Examples of dissertation abstracts from different topics are commonly available in scholarly journals and websites. We also encourage you to go and search your university or other local library catalogue -  multiple useful samples can surely be found there. From our part, we will attach 2 free examples for inspiration.

Dissertation abstract example

Thesis abstract example

Need a custom summary or a whole work? Contact StudyCrumb and get proficient assistance with PhD writing or dissertation proposal help .

Extra Tips on Writing a Dissertation Abstract

Writing a dissertation or PhD thesis abstract is not an easy task. You must ensure that it accurately reflects your paper's content. In this context, we will provide top-class tips on how to write an abstract in a dissertation or thesis for you to succeed. Combined with an example of a dissertation abstract above, you can rest assured that you'll do everything correctly. Below are extra tips on how to write a thesis abstract:

• Keep it concise, not lengthy - around 300 words.
• Focus on the “what”, “why”, “how”, and “so what” of your research.
• Be specific and concrete: avoid generalization.
• Use simple language: précis should be easy to understand for readers unfamiliar with your topic.
• Provide enough relevant information so your readers can grasp a main idea without necessarily reading your paper in its entirety.
• Write and edit your abstract several times until every sentence is clear and concise.
• Verify accuracy: make sure that précis reflect your content precisely.

Bottom Line on How to Write a Dissertation or Thesis Abstract

The bottom line when it comes to how to write a dissertation abstract is that you basically need to mirror your study's essence on a much lower scale. Specifically, students should keep their précis concise, use simple language, include relevant information, and write several drafts. Don't forget to review your précis and make sure they are precise enough. In addition, make sure to include all keywords so readers can find your paper quickly. You are encouraged to examine several sample dissertation abstracts to understand how to write your own.

Are you still struggling with your abstract? Contact our dissertation writing service and our qualified writers will gladly help you with this uneasy task. They will make sure it is delivered strictly on time and meets all requirements!  

Joe Eckel is an expert on Dissertations writing. He makes sure that each student gets precious insights on composing A-grade academic writing.

You may also like

FAQ About Dissertation Abstract Writing

1. why is a dissertation abstract important.

Dissertation abstracts are important because they give readers a brief overview of your research. They succinctly introduce critical information and study’s key points to help readers decide if reading your thesis is worth their time. During indexing, an abstract allows categorizing and filtering papers through keyword searches. Consequently, this helps readers to easily find your paper when searching for information on a specific topic.

2. When should I write an abstract for a dissertation or thesis?

You are supposed to write a dissertation or thesis abstract after completing research and finishing work on your paper. This way, you can write précis that accurately reflects all necessary information without missing any important details. Writing your thesis précis last also lets you provide the right keywords to help readers find your dissertation.

3. What should a dissertation abstract include?

A dissertation abstract should include a research problem, goals and objectives, methods, results, and study implications. Ensure that you incorporate enough information so readers can get an idea of your thesis's content without reading it through. Use relevant keywords to ensure readers can easily find your paper when searching for information on a specific topic.

4. How to write a strong dissertation abstract?

To write a strong abstract for a dissertation, you should state your research problem, write in an active voice, use simple language, and provide relevant information. Additionally, write and edit your précis several times until it is clear and concise, and verify that it accurately mirrors your paper’s content. Reviewing several samples is also helpful for understanding how to write your own.

The Dissertation Abstract: 101

How to write a clear & concise abstract (with examples).

By:   Madeline Fink (MSc) Reviewed By: Derek Jansen (MBA)   | June 2020

So, you’ve (finally) finished your thesis or dissertation or thesis. Now it’s time to write up your abstract (sometimes also called the executive summary). If you’re here, chances are you’re not quite sure what you need to cover in this section, or how to go about writing it. Fear not – we’ll explain it all in plain language , step by step , with clear examples .

Overview: The Dissertation/Thesis Abstract

• What exactly is a dissertation (or thesis) abstract
• What’s the purpose and function of the abstract
• Why is the abstract so important
• How to write a high-quality dissertation abstract
• Example/sample of a quality abstract
• Quick tips to write a high-quality dissertation abstract

What is an abstract?

Simply put, the abstract in a dissertation or thesis is a short (but well structured) summary that outlines the most important points of your research (i.e. the key takeaways). The abstract is usually 1 paragraph or about 300-500 words long (about one page), but but this can vary between universities.

A quick note regarding terminology – strictly speaking, an abstract and an executive summary are two different things when it comes to academic publications. Typically, an abstract only states what the research will be about, but doesn’t explore the findings – whereas an executive summary covers both . However, in the context of a dissertation or thesis, the abstract usually covers both, providing a summary of the full project.

In terms of content, a good dissertation abstract usually covers the following points:

• The purpose of the research (what’s it about and why’s that important)
• The methodology (how you carried out the research)
• The key research findings (what answers you found)
• The implications of these findings (what these answers mean)

We’ll explain each of these in more detail a little later in this post. Buckle up.

What’s the purpose of the abstract?

A dissertation abstract has two main functions:

The first purpose is to  inform potential readers  of the main idea of your research without them having to read your entire piece of work. Specifically, it needs to communicate what your research is about (what were you trying to find out) and what your findings were . When readers are deciding whether to read your dissertation or thesis, the abstract is the first part they’ll consider. 

The second purpose of the abstract is to  inform search engines and dissertation databases  as they index your dissertation or thesis. The keywords and phrases in your abstract (as well as your keyword list) will often be used by these search engines to categorize your work and make it accessible to users. 

Simply put, your abstract is your shopfront display window – it’s what passers-by (both human and digital) will look at before deciding to step inside. 

Why’s it so important?

The short answer – because most people don’t have time to read your full dissertation or thesis! Time is money, after all…

If you think back to when you undertook your literature review , you’ll quickly realise just how important abstracts are! Researchers reviewing the literature on any given topic face a mountain of reading, so they need to optimise their approach. A good dissertation abstract gives the reader a “TLDR” version of your work – it helps them decide whether to continue to read it in its entirety. So, your abstract, as your shopfront display window, needs to “sell” your research to time-poor readers.

You might be thinking, “but I don’t plan to publish my dissertation”. Even so, you still need to provide an impactful abstract for your markers. Your ability to concisely summarise your work is one of the things they’re assessing, so it’s vital to invest time and effort into crafting an enticing shop window.  

A good abstract also has an added purpose for grad students . As a freshly minted graduate, your dissertation or thesis is often your most significant professional accomplishment and highlights where your unique expertise lies. Potential employers who want to know about this expertise are likely to only read the abstract (as opposed to reading your entire document) – so it needs to be good!

Think about it this way – if your thesis or dissertation were a book, then the abstract would be the blurb on the back cover. For better or worse, readers will absolutely judge your book by its cover .

How to write your abstract

As we touched on earlier, your abstract should cover four important aspects of your research: the purpose , methodology , findings , and implications . Therefore, the structure of your dissertation or thesis abstract needs to reflect these four essentials, in the same order.  Let’s take a closer look at each of them, step by step:

Step 1: Describe the purpose and value of your research

Here you need to concisely explain the purpose and value of your research. In other words, you need to explain what your research set out to discover and why that’s important. When stating the purpose of research, you need to clearly discuss the following:

• What were your research aims and research questions ?
• Why were these aims and questions important?

It’s essential to make this section extremely clear, concise and convincing . As the opening section, this is where you’ll “hook” your reader (marker) in and get them interested in your project. If you don’t put in the effort here, you’ll likely lose their interest.

Step 2: Briefly outline your study’s methodology

In this part of your abstract, you need to very briefly explain how you went about answering your research questions . In other words, what research design and methodology you adopted in your research. Some important questions to address here include:

• Did you take a qualitative or quantitative approach ?
• Who/what did your sample consist of?
• How did you collect your data?
• How did you analyse your data?

Simply put, this section needs to address the “ how ” of your research. It doesn’t need to be lengthy (this is just a summary, after all), but it should clearly address the four questions above.

Need a helping hand?

Step 3: Present your key findings

Next, you need to briefly highlight the key findings . Your research likely produced a wealth of data and findings, so there may be a temptation to ramble here. However, this section is just about the key findings – in other words, the answers to the original questions that you set out to address.

Again, brevity and clarity are important here. You need to concisely present the most important findings for your reader.

Step 4: Describe the implications of your research

Have you ever found yourself reading through a large report, struggling to figure out what all the findings mean in terms of the bigger picture? Well, that’s the purpose of the implications section – to highlight the “so what?” of your research. 

In this part of your abstract, you should address the following questions:

• What is the impact of your research findings on the industry /field investigated? In other words, what’s the impact on the “real world”. 
• What is the impact of your findings on the existing body of knowledge ? For example, do they support the existing research?
• What might your findings mean for future research conducted on your topic?

If you include these four essential ingredients in your dissertation abstract, you’ll be on headed in a good direction.

Example: Dissertation/thesis abstract

Here is an example of an abstract from a master’s thesis, with the purpose , methods , findings , and implications colour coded.

The U.S. citizenship application process is a legal and symbolic journey shaped by many cultural processes. This research project aims to bring to light the experiences of immigrants and citizenship applicants living in Dallas, Texas, to promote a better understanding of Dallas’ increasingly diverse population. Additionally, the purpose of this project is to provide insights to a specific client, the office of Dallas Welcoming Communities and Immigrant Affairs, about Dallas’ lawful permanent residents who are eligible for citizenship and their reasons for pursuing citizenship status . The data for this project was collected through observation at various citizenship workshops and community events, as well as through semi-structured interviews with 14 U.S. citizenship applicants . Reasons for applying for U.S. citizenship discussed in this project include a desire for membership in U.S. society, access to better educational and economic opportunities, improved ease of travel and the desire to vote. Barriers to the citizenship process discussed in this project include the amount of time one must dedicate to the application, lack of clear knowledge about the process and the financial cost of the application. Other themes include the effects of capital on applicant’s experience with the citizenship process, symbolic meanings of citizenship, transnationalism and ideas of deserving and undeserving surrounding the issues of residency and U.S. citizenship. These findings indicate the need for educational resources and mentorship for Dallas-area residents applying for U.S. citizenship, as well as a need for local government programs that foster a sense of community among citizenship applicants and their neighbours.

Practical tips for writing your abstract

When crafting the abstract for your dissertation or thesis, the most powerful technique you can use is to try and put yourself in the shoes of a potential reader. Assume the reader is not an expert in the field, but is interested in the research area. In other words, write for the intelligent layman, not for the seasoned topic expert. 

Start by trying to answer the question “why should I read this dissertation?”

Remember the WWHS.

Make sure you include the  what , why ,  how , and  so what  of your research in your abstract:

• What you studied (who and where are included in this part)
• Why the topic was important
• How you designed your study (i.e. your research methodology)
• So what were the big findings and implications of your research

Keep it simple.

Use terminology appropriate to your field of study, but don’t overload your abstract with big words and jargon that cloud the meaning and make your writing difficult to digest. A good abstract should appeal to all levels of potential readers and should be a (relatively) easy read. Remember, you need to write for the intelligent layman.

Be specific.

When writing your abstract, clearly outline your most important findings and insights and don’t worry about “giving away” too much about your research – there’s no need to withhold information. This is the one way your abstract is not like a blurb on the back of a book – the reader should be able to clearly understand the key takeaways of your thesis or dissertation after reading the abstract. Of course, if they then want more detail, they need to step into the restaurant and try out the menu.

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

20 Comments

This was so very useful, thank you Caroline.

Much appreciated.

This information on Abstract for writing a Dissertation was very helpful to me!

This was so useful. Thank you very much.

This was really useful in writing the abstract for my dissertation. Thank you Caroline.

Very clear and helpful information. Thanks so much!

Fabulous information – succinct, simple information which made my life easier after the most stressful and rewarding 21 months of completing this Masters Degree.

Very clear, specific and to the point guidance. Thanks a lot. Keep helping people 🙂

This was very helpful

Thanks for this nice and helping document.

Nicely explained. Very simple to understand. Thank you!

Waw!!, this is a master piece to say the least.

Very helpful and enjoyable

Thank you for sharing the very important and usful information. Best Bahar

Very clear and more understandable way of writing. I am so interested in it. God bless you dearly!!!!

Really, I found the explanation given of great help. The way the information is presented is easy to follow and capture.

Wow! Thank you so much for opening my eyes. This was so helpful to me.

Thanks for this! Very concise and helpful for my ADHD brain.

I am so grateful for the tips. I am very optimistic in coming up with a winning abstract for my dessertation, thanks to you.

Thank you! First time writing anything this long!

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

How to Write an Abstract for Your Thesis or Dissertation What is an Abstract? The abstract is an important component of your thesis. Presented at the beginning of the thesis, it is likely the first substantive description of your work read by an external examiner. You should view it as an opportunity to set accurate expectations. The abstract is a summary of the whole thesis. It presents all the major elements of your work in a highly condensed form. An abstract often functions, together with the thesis title, as a stand-alone text. Abstracts appear, absent the full text of the thesis, in bibliographic indexes such as PsycInfo. They may also be presented in announcements of the thesis examination. Most readers who encounter your abstract in a bibliographic database or receive an email announcing your research presentation will never retrieve the full text or attend the presentation. An abstract is not merely an introduction in the sense of a preface, preamble, or advance organizer that prepares the reader for the thesis. In addition to that function, it must be capable of substituting for the whole thesis when there is insufficient time and space for the full text. Size and Structure Currently, the maximum sizes for abstracts submitted to Canada's National Archive are 150 words (Masters thesis) and 350 words (Doctoral dissertation). To preserve visual coherence, you may wish to limit the abstract for your doctoral dissertation to one double-spaced page, about 280 words. The structure of the abstract should mirror the structure of the whole thesis, and should represent all its major elements. For example, if your thesis has five chapters (introduction, literature review, methodology, results, conclusion), there should be one or more sentences assigned to summarize each chapter. Clearly Specify Your Research Questions As in the thesis itself, your research questions are critical in ensuring that the abstract is coherent and logically structured. They form the skeleton to which other elements adhere. They should be presented near the beginning of the abstract. There is only room for one to three questions. If there are more than three major research questions in your thesis, you should consider restructuring them by reducing some to subsidiary status. Don't Forget the Results The most common error in abstracts is failure to present results. The primary function of your thesis (and by extension your abstract) is not to tell readers what you did, it is to tell them what you discovered. Other information, such as the account of your research methods, is needed mainly to back the claims you make about your results. Approximately the last half of the abstract should be dedicated to summarizing and interpreting your results. Updated 2008.09.11 © John C. Nesbit

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

• How to Write an Abstract for a Dissertation

Written by Hannah Slack

Every PhD student will have to write an abstract. Whether it’s for a conference paper , journal article or your thesis , the abstract is an important part for many academic activities. Although only a single short paragraph, writing one effectively takes practice.

This page will take you through what a dissertation abstract is, why it’s so important and how to write one.

On this page

What is an academic abstract.

An academic abstract is a short and concise summary of research . It should cover the aim or research question of your work, your methodology, results and the wider implications of your conclusions. All this needs to be covered in around 200-300 words .

One of the common mistakes people make when writing abstracts is not understanding their purpose. An abstract is not for the author, it’s for the reader . To summarise your research, as the person who knows it best, may seem easy. But to be able to communicate the complexities and importance of your work to someone else, likely outside of your field, can be difficult.

When will I need to write an academic abstract?

There are many different places that you’ll find abstracts. Some of the most common ones include:

• Grant and funding applications
• Journal articles
• Conference applications
• Conference proceedings

This guide primarily focuses on the dissertation abstract, which is the most common form of this kind of text.

What’s the difference between an abstract and an introduction?

The main differences between a PhD dissertation abstract and an introduction are the purpose and the length. An abstract is a short, paragraph-sized summary of the whole thesis, covering context, your research and results. Whereas an introduction should be much longer and only cover the context of your work. An introduction is designed to explain the background of your work and so will take up at least an entire page.

Why are abstracts important?

Abstracts are important because they are a quick and easy way to communicate your work. In many ways, academic abstracts are a promotional tool and so should be considered carefully.

For your thesis, it’s the first thing your examiners will read, forming their expectations for the rest of the dissertation.

In journal articles, their purpose is to convince the reader that they should read your article. If you’re applying for a conference, the abstract gives the organiser a taster of your paper so they can decide whether it’s suitable.

Effectively, your abstract is the first impression someone gets of your research and so it’s important to put your best foot forward.

How to write a PhD abstract

How you write a dissertation abstract will largely depend on what it’s for. For a PhD dissertation or journal article, you should have already written up the research which the abstract will summarise. You should focus on making sure your summary is an honest representation of the larger written work. However, for a conference application it’s likely you won’t yet have written the paper. In this instance, the abstract might focus more on the broader themes you intend to comment on and your methodology.

Whatever the intended purpose, all abstracts should broadly follow the same structure. To help you, we’ve put together a template to make sure you include all the important points.

PhD abstract format

Because a lot of information needs to be packed into a short paragraph, an abstract is easier to write when you break it down into the key elements. For a first draft, spend a few minutes on each of the six steps, only writing down one or two sentences.

• Rationale – Ask yourself why you are researching the topic and what is the context for your work. Here you should communicate the purpose of your study within the wider field.
• Research question – Now you should specify what the exact goal of this piece of research is. What question are you providing the answer for?
• Evidence and methods – After discussing the broader purpose of your work you now need to let the reader know what you have actually done. Try to summarise your methods and evidence with a few keywords to keep if brief. Some examples include qualitative, quantitative, archival or experimental.
• Results – Here, you should summarise your outcomes and highlight what is new or significant about your findings.
• Conclusion – The conclusion should relate back to your rationale and research question. Ask yourself, ‘what do the results mean?’
• Implications and applications – Lastly, the reader needs to know why your results are important to the field. You need to specify what is significant about this work and how it can be useful.

Once you have your framework it can be edited for a more natural flow. You may find that some points naturally merge into one sentence and others need some elaboration. But remember, the abstract must be short and concise so don’t be tempted to extend areas unnecessarily. Once you have a draft that you are happy with, consider asking for feedback from other PhD students or your supervisor.

Doing a PhD

For more information on trhe different stages of a doctorate, check out our guide to the PhD journey .

Ready to do a PhD?

Search our project listings to find out what you could be studying.

Want More Updates & Advice?

What happens during a typical PhD, and when? We've summarised the main milestones of a doctoral research journey.

The PhD thesis is the most important part of a doctoral degree. This page will introduce you to what you need to know about the PhD dissertation.

This page will give you an idea of what to expect from your routine as a PhD student, explaining how your daily life will look at you progress through a doctoral degree.

PhD fees can vary based on subject, university and location. Use our guide to find out the PhD fees in the UK and other destinations, as well as doctoral living costs.

Our guide tells you everything about the application process for studying a PhD in the USA.

Postgraduate students in the UK are not eligible for the same funding as undergraduates or the free-hours entitlement for workers. So, what childcare support are postgraduate students eligible for?

FindAPhD. Copyright 2005-2024 All rights reserved.

Unknown    ( change )

Have you got time to answer some quick questions about PhD study?

Select your nearest city

You haven’t completed your profile yet. To get the most out of FindAPhD, finish your profile and receive these benefits:

• Monthly chance to win one of ten £10 Amazon vouchers ; winners will be notified every month.*
• The latest PhD projects delivered straight to your inbox
• Access to our £6,000 scholarship competition
• Weekly newsletter with funding opportunities, research proposal tips and much more
• Early access to our physical and virtual postgraduate study fairs

Or begin browsing FindAPhD.com

or begin browsing FindAPhD.com

*Offer only available for the duration of your active subscription, and subject to change. You MUST claim your prize within 72 hours, if not we will redraw.

Do you want hassle-free information and advice?

Create your FindAPhD account and sign up to our newsletter:

• Find out about funding opportunities and application tips
• Receive weekly advice, student stories and the latest PhD news
• Hear about our upcoming study fairs
• Save your favourite projects, track enquiries and get personalised subject updates

Create your account

Looking to list your PhD opportunities? Log in here .

What is a dissertation abstract and how do I write one for my PhD?

Feb 12, 2019

There are a lot of posts that talk about how to write an abstract. Most say that you should write your abstract to impress your examiner.

We say that you need to flip things upside down: sure, your examiner will read it and want to see that you’ve written it well, but you should actually have your next boss in mind when you write it.

When you apply for your first academic job, the abstract may be the only part of your thesis that your new boss will read. They may not have the time or energy to read the whole thesis, so the abstract plays a crucial role. You should write it as if you academic career depends on it.

In this guide we talk about how to write an outstanding abstract that will (hopefully) land you a job.

If you haven’t already, make sure you download our PhD Writing Template , which you can use in conjunction with this guide to supercharge your PhD.

What is an abstract?

  This is fairly straightforward stuff, but let us be clear so we are all on the same page.

An abstract is a short summary at the beginning of the PhD that sums up the research, summarises the separate sections of the thesis and outlines the contribution.

It is typically used by those wishing to get a broad understanding of a piece of research prior to reading the entire thesis.

When you apply for your first academic job, the hiring manager will take a look through applicants’ abstracts (as well as your CV and covering letter) to create a shortlist. If you are lucky enough to do well at an interview, your potential new boss will take another look through it before deciding whether to offer you the job.

Why don’t they read the whole thing? Apart from the fact that they’re way too busy to read 200+ pages, a well written abstract actually contains all they need to know. It is a way of letting them see what your research is about, what contribution it makes, what your understanding of the field is and how or whether you will fit into the department.

So, you need to write it well.

But, don’t underestimate how hard it is to write a PhD thesis abstract. You have to condense hundred of pages and years of work into a few hundred words (exactly how many will depend on your university, so double check with them before you start writing).

How do I write a good PhD abstract?

Some blog posts use keywords to summarise the content (this one does, scroll down to see them). The abstract is similar. It’s an extended set of keywords to summarise a complex piece of research.

Above all, your PhD abstract should answer the question: ‘so what’ ? In other words, what is the contribution of your thesis to the field?

If you’ve been using our PhD writing template you’ll know that, to do this, your abstract should address six questions:

• What is the reason for writing the thesis?
• What are the current approaches and gaps in the literature?
• What are your research question(s) and aims?
• Which methodology have you used?
• What are the main findings?
• What are the main conclusions and implications?

One thing that should be obvious is that you can’t write your abstract until the study itself has been written. It’ll typically be the last thing you write (alongside the acknowledgements).

But how can I write a great one?

  The tricky thing about writing a great PhD abstract is that you haven’t got much space to answer the six questions above. There are a few things to consider though that will help to elevate your writing and make your abstract as efficient as possible:

• Give a good first impression by writing in short clear sentences
• Don’t repeat the title in the abstract
• Don’t cite references
• Use keywords from the document
• Respect the word limit
• Don’t be vague – the abstract should be a self contained summary of the research, so don’t introduce ambiguous words or complex terms
• Focus on just four or five essential points, concepts, or findings. Don’t, for example, try to explain your entire theoretical framework
• Edit it carefully. Make sure every word is relevant (you haven’t got room for wasted words) and that each sentence has maximum impact
• Avoid lengthy background information
• Don’t mention anything that isn’t discussed in the thesis
• Avoid overstatements
• Don’t spin your findings, contribution or significance to make your research sound grander or more influential that it actually is

Examples of a good and bad abstract

We can see that the bad abstract fails to answer the six questions posed above. It reads more like a PhD proposal, rather than a summary of a piece of research.

Specifically:

• It doesn’t discuss the reason why the thesis was written
• It doesn’t outline the gaps in the literature
• It doesn’t outline the research questions or aims
• It doesn’t discuss the methods
• It doesn’t discuss the findings
• It doesn’t discuss the conclusions and implications of the research.

It is also too short, lacks adequate keywords and introduces unnecessary detail. The abbreviations and references only serve to confuse the reader and the claim that the thesis will ‘develop a new theory of climate change’ is both vague and over-ambitious. The reader will see through this.

The good abstract though does a much better job at answering the six questions and summarising the research.

• The reason why the thesis was written is stated: ‘We do so to better enable policy makers and academics to understand the nuances of multi-level climate governance’ and….’it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’
• The gap is clearly defined: ‘The theory has neglected to account for the role of local governments.’
• The research question are laid out: ‘We ask to what extent and in what ways local governments in the UK’…
• The methods are hinted at: ‘Using a case study…’
• The findings are summarised: ‘We show that local governments are both implementers and interpreters of policy. We also show that they make innovative contributions to and influence the direction of national policy.’
• The conclusions and implications are clear: ‘The significance of this study is that it informs our theoretical understanding of climate governance by introducing a focus on local government hitherto lacking, and informs our empirical understanding of housing and recycling policy.’

This abstract is of a much better length, and it fully summarises what the thesis is about. We can see that if someone (i.e. your hiring manager) were to read just this abstract, they’d understand what your thesis is about and the contribution that it makes.

Your PhD thesis. All on one page. 

Use our free PhD structure template to quickly visualise every element of your thesis. 

I can’t summarise my thesis, what do I do?

  We suggest you fill out our PhD Writing Template . We’ve designed it so that you can visualise your PhD on one page and easily see the main components. It’s really easy to use. It asks you a few questions related to each section of your thesis. As you answer them, you develop a synopsis. You can use that synopsis to inform your abstract. If you haven’t downloaded it, you can find it here.

  Like everything related to writing, it takes practice before you get great at writing abstracts. Follow our tips and you’ll have a head start over others.

Remember, you’re not writing your abstract for anyone other than your hiring manager. Make sure it showcases the best of your research and shows your skills as both a researcher and a writer.

If you’re struggling, send us your abstract by email and we’ll have give you free advice on how to improve it.

Hello, Doctor…

Sounds good, doesn’t it?  Be able to call yourself Doctor sooner with our five-star rated How to Write A PhD email-course. Learn everything your supervisor should have taught you about planning and completing a PhD.

Now half price. Join hundreds of other students and become a better thesis writer, or your money back. 

Share this:

Hello! I am a first year PhD student and I am interested in your Thesis writing course. However, I don’t have Paypal, thus I would like to know if there is an alternative way for you to get paid. I hope so, because I have been “following” you and I think the course can be really useful for me :) Hope to hear from you soon. Best wishes, Belén Merelas

Thanks for the comment – I have sent you an email.

Hello! I am a Master’s student and I have applied for a PhD position. The professors have asked me to write a short abstract-like text, based on a brief sentence they will send me, related to the project study. How am I supposed to write a text like that when I don’t have the whole paper, the methods, results etc? Thank you in advance!

Hi Maria. I’m afraid that without knowing more about your topic or subject I am unable to give you advice on this. Sorry I can’t help in the way you may have hoped.

Thank u so much… your tips have really helped me to broaden my scope on the idea of how to write an abstract for my Ph.D. course. This is so thoughtful of you… The article is very informative and helpful…Thanks again!

I’m so pleased. Thanks for your lovely words. They’re music to my ears.

Very insightful Thanks

Glad you think so. Good luck with the writing.

Thank you so much Doc

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Search The PhD Knowledge Base

Most popular articles from the phd knowlege base.

The PhD Knowledge Base Categories

• Your PhD and Covid
• Mastering your theory and literature review chapters
• How to structure and write every chapter of the PhD
• How to stay motivated and productive
• Techniques to improve your writing and fluency
• Advice on maintaining good mental health
• Resources designed for non-native English speakers
• PhD Writing Template
• Explore our back-catalogue of motivational advice

• HOW WE WORK
• THESIS WRITING
• DISSERTATION PROCESS

Steps Guide to Create Dissertation Abstract With Examples

Home >> Blog >> Steps Guide to Create Dissertation Abstract With Examples

An abstract summarizes your entire dissertation, typically ranging from 200-350 words. It should provide a clear overview of your project and highlight the main points of your argument. To write an effective abstract, you'll need to be concise and organized while still presenting your ideas clearly and coherently.

If you're a student working on a dissertation, you know that writing the abstract can be one of the most challenging parts. But don't worry, we're here to help!

In this blog post, we'll give you a step-by-step guide to creating your dissertation abstract and some examples to help you get started. So read on and start writing an abstract that will make your professors proud!

What is a Dissertation Abstract?

How to write a good dissertation abstract, dissertation abstract example, tips to write a strong dissertation abstract.

‘What is abstract in dissertation writing?’

The abstract is designed to quickly summarize your dissertation in an engaging way. It aims to show readers what they can expect from reading it more thoroughly later on. It is an important part of dissertation writing and must be written carefully.

The abstract is a short and concise way of getting your research paper's message across. It should summarize the entire work in one paragraph, so it can be easily understood by readers who are not familiar with what it is about!

It should be included before the table of contents and after the title page and acknowledgments.

‘What should dissertation abstract include?’

Ideally, a dissertation or thesis abstract should include the following things;

• The study's and research's goal.
• Your dissertation's research methods.
• The key findings and results.
• The implications of the obtained results.

A good abstract discusses all these points. It is written in the present simple tense.

What is the Main Purpose of an Abstract?

The first purpose of an abstract is to capture the attention of potential readers before they read the rest of your work. It should specifically communicate what you were attempting to discover and how this research was conducted so that anyone interested can decide whether or not they want more information on that topic.

The abstract provides brief background information and introduces your work to the readers. It helps readers in deciding whether or not to continue reading your work. It should be included in all research projects and case studies, just like a literature review.

Dissertation Abstract Structure

Here are the sections that must be included in a dissertation abstract format.

• Introduction
• Aims and objectives
• Results and discussion

Dissertation Abstract Length

It varies depending on which college/university you attend. Some universities require that you summarize your study in one paragraph, while others ask for about 300-500 words.

Dissertation abstract word count varies based on different colleges’ policies, so be sure to check yours before writing it.

(back to top)

Here are the easy steps to write a good dissertation abstract.

• 1. Explain the Research Purpose

Explain everything briefly and describe the significance of your research work. State the purpose and significance of your research and what the reader can learn from reading your paper.

The following are the components of an abstract:

• Your research objectives and questions.
• The significance of these research questions.

You must make this section extremely clear to capture your reader's attention and interest. This is where you'll "hook" them with a compelling introduction that will capture their attention in reading more about the project.

They might lose patience if we don't put in the effort from start to finish.

• 2. Describe Research Methodology

Describe how you responded to the research questions. This means that you will present the methodology and design of your research in this paragraph. It could be qualitative or quantitative in nature. Mention it whatever it is for your reader.

However, keep it brief and avoid providing all of the details here.

• 3. State Research’s Main Findings

This section contains the most important findings from your research. It should be concise and clear to readers about what you discovered, without padding it with unnecessary information or repeating things that have already been covered.

Remember to be concise and clear when summarizing the most important aspects of your study, namely answers to its original questions.

• 4. Discuss the Research Implications

Have you ever found yourself struggling to grasp the big picture while reading a lengthy paper? That is why we have implications. It explains what those numbers and findings mean in our daily lives as citizens and readers.

The following are the topics that should be discussed here.

• The significance of your research.
• The significance and impact of your research findings.
• Future research possibilities

Ensure that these elements are included in your abstract.

Here is a dissertation abstract sample PDF for your better understanding.

Thesis Introduction Chapter Sample

Here are the tips for writing a good and engaging abstract for your dissertation.

• Recognize the purpose of writing an abstract.
• Create an abstract after writing the entire dissertation.
• Explain each chapter in one to two lines before writing the abstract.
• Examine some abstract examples to gain a better understanding of them.
• Write clearly and avoid using overly complicated language.
• Concentrate on your personal research.
• Make an effort to keep everything concise and to the point.
• Keep the details for the main sections and don't include everything here.
• When you have finished writing your thesis abstract, it is time to read it and remove any errors thoroughly.

You can save time and effort by using these simple tips to write your dissertation abstract correctly. If you still require assistance, contact us at GradSchoolGenius for help! We are professionals who want nothing more than the best possible outcomes for students; they’ll be happy to assist with anything to get you a perfect paper.

Frequently Asked Questions

What is the difference between an abstract and an introduction.

An abstract is less than a page long, whereas an introduction is much longer. The introduction chapter is quite detailed, as it introduces the readers to each important and interesting detail. An abstract is unique in that it is used to capture the reader's interest.

How long should an abstract be for a 10000 word dissertation?

If you are writing a 10000-word dissertation, abstracts are typically about 300-350 words long. This is because it contains all the information necessary to understand what your paper is about.

What are the 5 parts of an abstract?

Here are 5 parts of an abstract:

• Research significance
• Methodology

Similar Blogs

• Dissertation Introduction
• Dissertation Topics
• Thesis Introduction
• Thesis Topics
• Thesis Format

GradSchoolGenius is a top-ranked academic writing service. We are home to high-quality academic thesis and dissertations for graduate and post-graduate students worldwide.

• 100% Plagiarism-free Work
• 100% Deadline Driven
• 100% Confidentiality
• 100% Money-back Guarantee
• 15+ Years of Experience
• 500+ Happy Clients
• 500+ Projects Completed
• 24/7 Customer Support

• How It Works
• PhD thesis writing
• Master thesis writing
• Bachelor thesis writing
• Dissertation writing service
• Dissertation abstract writing
• Thesis proposal writing
• Thesis editing service
• Thesis proofreading service
• Thesis formatting service
• Coursework writing service
• Research paper writing service
• Architecture thesis writing
• Computer science thesis writing
• Engineering thesis writing
• History thesis writing
• MBA thesis writing
• Nursing dissertation writing
• Psychology dissertation writing
• Sociology thesis writing
• Statistics dissertation writing
• Buy dissertation online
• Write my dissertation
• Cheap thesis
• Cheap dissertation
• Custom dissertation
• Dissertation help
• Pay for thesis
• Pay for dissertation
• Senior thesis
• Write my thesis

How to Craft a Killer Dissertation Abstract 2023

Learn how you can write a top-rated dissertation abstract thick and fast, with our professional guide.

Special tip – maintain a hawk-eye to the end.

What is an Abstract in a Dissertation?

A dissertation abstract is a summary of the entire thesis. It gives the significant proponents of your paper in a highly condensed form.

An abstract in a dissertation serves the following functions:

• Acts as an introduction to your dissertation article
• Sets the stage for the thesis
• Can substitute the whole thesis

The elements of an abstract include:

• Research problem and objectives
• Major results
• The conclusion

It is an essential component of the thesis that can either earn you a top grade or be the reason for your academic downfall.

How to Write a Dissertation Abstract

It is essential to determine the type of abstract for your dissertation. In writing a dissertation abstract, take note of the following types:

• Descriptive Abstract

It gives the kind of information found in your paper. A descriptive outline is usually concise and can be about 100 words or less.

• Critical Abstract

It describes the main findings and, additionally, a comment on the validity, completeness, or reliability of the study. Due to its interpretive nature, it generally contains 400-500 words in length.

• Informative Abstract

As the name suggests, this type presents and explains the main arguments, essential results, and evidence in the thesis. Although the length varies, it is not more than 300 words in length.

• Highlight Abstract

It serves to attract the reader’s attention to the paper. It uses leading remarks to spark the interest of the audience.

We are now going to see how to write an abstract for a dissertation in ten significant steps:

Ten Top-Notch Steps to Writing an Abstract for a Dissertation

Step 1: Define the purpose of your research

Start by making plain the purpose of your study. State the research question you are going to handle or the practical problem of your paper.

Do not delve into much detailed information here. For starters, you can have a brief context on the social or academic relevance of your topic.

Write the objectives of your research after stating the problem. When indicating the goals, use verbs such as:

To test To investigate, To evaluate To analyze

Use either the present or simple past tense for this section. Do not use the future tense in any case since the research is complete already.

Dissertation abstract example for this section:

Correct: This study evaluates the relationship between COVID-19 and flu. Incorrect: This study will determine the relationship between COVID-19 and influenza.

Step 2: Identify the methods you are going to use for your research

Now in this stage, clearly make mention of the ways you are going to use to answer your research question.

Write it in one to two sentences without making it too long. Ensure that the points are precise and to the end.

It should be in the simple past tense. Why? Because you have already done your research and completed it using these methods.

Do not go into the strengths and weaknesses of the research methods. The reader should be able to read through it fast and still understand the strategy and methodology of your thesis.

Correct: Direct observation was conducted on 40 COVID-19 patients. Correct: Questionnaires were administered to 20 doctors dealing with COVID-19 patients. Incorrect: Laboratory experiments will be done with ten specimens.

Step 3: Make a summary of the results

After collecting data, it is time to give brief but elaborate results in the abstract for the dissertation.

The results section depends on the length and complexity of the research. However, ensure that it doesn’t make the abstract longer than is recommended.

Do not include irrelevant results which may not add any value to your paper. Strive to point out the essential outcomes of the article which support or answer your research question.

Write the results in either the present or simple past tense.

Correct: Our findings show a substantial similarity in the symptoms of both COVID-19 and flu. Correct: Our analysis showed a significant similarity between the symptoms of both COVID-19 and flu. Incorrect: Our study has shown a considerable similarity in the symptoms of both COVID-19 and flu. Incorrect: Our findings will be showing a substantial similarity in the symptoms of both COVID-19 and flu.

Step 4: Finish off with the conclusions from your research

Your abstract should have an answer to the research question, which is in this part. Your reader should get the main point of your thesis at this point. What has your research found or proved? The conclusion should be able to tell this to the reader.

Improve the credibility of your dissertation by adding any relevant limitations in this section of the abstract. From the thesis abstract examples, we are going to see below; it is evident that the conclusion is as brief as possible.

You can also have recommendations or suggestions for further research in your conclusion. Nevertheless, they should be as brief as possible. Do not write a long list that will interfere with the length of the abstract.

Write the conclusion in the present simple tense. Here are examples for your inspiration:

Correct: We conclude that flu is a primary symptom of COVID-19. Incorrect: We found that influenza is a primary symptom of COVID-19.

Bonus Tips for Writing a Dissertation Abstract

Now that we have looked at the essential steps to follow, here are some expert tips to crank up your abstract:

Follow the recommended formatting requirements for the abstract. The format will include; word limit, length, and spacing, style (APA, MLA, etc.)

The standard formatting requires that you do not write more than one double-spaced page.

• Avoid verbosity

Each word in a sentence counts due to the brevity of an abstract. Therefore, use short but communicating sentences.

Do not add unnecessary words or jargon, as this will obscure your abstract. Remember that the reader should be able to understand your abstract in the shortest time possible.

Ensure that you maintain the proper balance between the different elements of the abstract.

Checklist for Writing an Abstract

• The type of abstract identified
• The conformity of the abstract to the conventions of the type chosen
• Is the problem interesting to write on
• What is your approach? (Prototype models, analytical models, etc.)
• What’s the answer (results)
• What is the implication of your solution? (Conclusion)

Writing a successful abstract requires both hard work and determination, but its fruits are worth the struggle. As you plan to write yours, ensure that all the elements discussed above appear in your paper.

For expert writing help , we have professional dissertation writers to get you started. What are you waiting for now?

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Comment * Error message

Name * Error message

Email * Error message

Save my name, email, and website in this browser for the next time I comment.

As Putin continues killing civilians, bombing kindergartens, and threatening WWIII, Ukraine fights for the world's peaceful future.

Ukraine Live Updates

• FindAMasters
• Researching and Writing a Masters Dissertation

Written by Mark Bennett

All Masters programmes include some form of extended individual project. Research-focussed programmes, such as an MRes , may include multiple independent research components. Taught courses usually culminate with a substantial research task, referred to as the Masters dissertation or thesis.

This article talks about how long a Masters dissertation is and the structure it follows.Before you get started on your dissertation, you'll usually need to write a proposal. Read our full guide to Masters dissertation proposals for more information on what this should include!

On this page

What’s the difference between a masters dissertation and an undergraduate dissertation.

The Masters thesis is a bridge between undergraduate study and higher level postgraduate degrees such as the PhD .

A postgraduate dissertation may not look that different to its undergraduate equivalent. You’ll likely have to produce a longer piece of work but the foundations remain the same.

After all, one of the purposes of an undergraduate dissertation or final year project is to prepare you for more in-depth research work as a postgraduate. That said, there are some important differences between the two levels.

So, how long is a Masters dissertation? A Masters dissertation will be longer than the undergraduate equivalent – usually it’ll be somewhere between 15,000 and 20,000 words, but this can vary widely between courses, institutions and countries.

To answer your overall research question comprehensively, you’ll be expected to identify and examine specific areas of your topic. This can be like producing a series of shorter pieces of work, similar to those required by individual modules. However, there’s the additional requirement that they collectively support a broader set of conclusions.

This more involved Masters dissertation structure will:

• Give you the scope to investigate your subject in greater detail than is possible at undergraduate level
• Challenge you to be effective at organising your work so that its individual components function as stages in a coherent and persuasive overall argument
• Allow you to develop and hone a suitable research methodology (for example, choosing between qualitative and quantitative methods)

If the individual topics within your overall project require you to access separate sources or datasets, this may also have an impact on your research process.

As a postgraduate, you’ll be expected to establish and assert your own critical voice as a member of the academic community associated with your field .

During your Masters thesis you’ll need to show that you are not just capable of analysing and critiquing original data or primary source material. You should also demonstrate awareness of the existing body of scholarship relating to your topic .

So, if you’ll excuse the pun, a ‘Masters’ degree really is about achieving ‘mastery’ of your particular specialism and the dissertation is where you’ll demonstrate this: showing off the scholarly expertise and research skills that you’ve developed across your programme.

What’s the difference between a dissertation and a thesis?

A dissertation is a long piece of (usually) written work on the same topic. A thesis is a little more specific: it usually means something that presents an original argument based on the interpretation of data, statistics or content.

So, a thesis is almost always presented as a dissertation, but not all dissertations present a thesis.

Masters dissertation structure

As you can probably imagine, no two dissertations follow the exact same structure, especially given the differences found between Masters programmes from university to university and country to country .

That said, there are several key components that make up the structure of a typical Masters dissertation

How long is a Masters dissertation?

Most dissertations will typically be between 15,000 and 20,000 words long, although this can vary significantly depending on the nature of the programme.

You should also check with your university exactly which sections of the dissertation count towards the final word count (the abstract, bibliography and appendices won’t usually be included in the total).

Usually around 300 words long, the abstract is meant to be a concise summary of your dissertation. It should briefly cover the question(s) you aim to answer, your primary argument and your conclusion.

Introduction

The purpose of the introduction is to provide context for the rest of the dissertation, setting out your aims and the scope of what you want to achieve with your research. The introduction should give a clear overview of the dissertation’s chapters and will usually be around 1,000 words long.

Literature review

This part of the dissertation should examine the scholarship that has already been published in your field, presenting various arguments and counter-arguments while situating your own research within this wider body of work.

You should analyse and evaluate other publications and explain how your dissertation will contribute to the existing literature in your subject area. The literature review sometimes forms part of the introduction or follows immediately on from it. Most literature reviews are up to 1,000 words long.

Research methodology

Not all dissertations will require a section covering research methodology (Arts and Humanities dissertations won’t normally undertake the kind of research that involves a set methodology). However, if you are using a particular method to collect information for your dissertation, you should make sure to explain the rationale behind your choice of methodology. The word count for this part of the dissertation is usually around the 1,500 mark.

Those in the Arts and Humanities will usually outline their theoretical perspectives and approaches as part of the introduction, rather than requiring a detailed explanation of the methodology for their data collection and analysis.

Results / findings

If your research involves some form of survey or experiment, this is where you’ll present the results of your work. Depending on the nature of the study, this might be in the form of graphs, tables or charts – or even just a written description of what the research entailed and what the findings were.

This section forms the bulk of your dissertation and should be carefully structured using a series of related chapters (and sub-chapters). There should be a logical progression from one chapter to the next, with each part building on the arguments of its predecessor.

It can be helpful to think of your Masters dissertation as a series of closely interlinked essays, rather than one overwhelming paper. The size of this section will depend on the overall word count for your dissertation. However, to give you a rough idea for a 15,000-word dissertation, the discussion part will generally be about 12,000 words long.

Here you should draw together the threads of the previous discussion chapters and make your final concluding statements, drawing on evidence and arguments that you’ve already explored over the course of the dissertation. Explain the significance of your findings and point towards directions that future research could follow. This section of the Masters thesis will be around 1,500 words long.

References / bibliography

While planning and writing your dissertation, you should keep an extensive, organised record of any papers, sources or books you’ve quoted (or referred to). This will be a lot easier than leaving all of it until the end and struggling to work out where a particular quotation is from!

Appendices won’t be necessary in many dissertations, but you may need to include supplementary material to support your argument. This could be interview transcripts or questionnaires. If including such content within the body of the dissertation won’t be feasible – i.e. there wouldn’t be enough space or it would break the flow of your writing – you should consult with your supervisor and consider attaching it in an appendix.

It’s worth bearing in mind that these sections won’t always be discretely labelled in every dissertation. For example, everything up to ‘discussion’ might be covered in introductory chapter (rather than as distinct sections). If you’re unsure about the structure of your Masters dissertation, your supervisor will be able to help you map it out.

How does supervision work for a Masters dissertation?

As a Masters student at the dissertation stage you’ll usually be matched with an academic within your institution who will be tasked with guiding your work. This might be someone who has already taught you, or it may be another scholar whose research interests and expertise align well with what you want to do. You may be able to request a particular supervisor, but taught postgraduates are more likely to be assigned them by their department.

Specific arrangements with your supervisor will vary depending on your institution and subject area. They will usually meet with you at the beginning of the dissertation period to discuss your project and agree a suitable schedule for its undertaking. This timetable will probably set dates for:

• Subsequent discussions and progress checks
• The submission of draft chapters or sections
• Feedback appointments

Though your supervisor is there to help and advise you, it is important to remember that your dissertation is a personal research project with associated expectations of you as an independent scholar.

As a rule of thumb, you can expect your supervisor to read each part of your dissertation once at the draft stage and to offer feedback. Most will not have time to look at lots of subsequent revisions, but may respond favourably to polite requests for exceptions (provided their own workload permits it).

Inundating your supervisor with emails or multiple iterations of draft material is best avoided; they will have their own research to manage (as well as other supervision assignments) and will be able to offer better quality feedback if you stick to an agreed schedule.

How is a Masters dissertation assessed and examined?

On most courses your dissertation will be assessed by an external examiner (as well as additional members of faculty within your university who haven’t been responsible for supervising you), but these will read and critique the work you submit without personally questioning and testing you on it.

Though this examination process is not as challenging as the oral defence or ‘ viva voce ’ required for a PhD thesis, the grading of your Masters dissertation is still a fundamental component of your degree.

On some programmes the result awarded to a student’s dissertation may determine the upper grade-band that can be awarded to their degree.

Search for a Masters

Ready to start looking for your ideal postgraduate opportunity? Browse and compare Masters degrees on FindAMasters.com.

Our postgrad newsletter shares courses, funding news, stories and advice

You may also like....

Applying for a Masters can feel a bit daunting. Here is a checklist of all the things you need to do to make sure you have everything covered in your Masters application.

Postgraduate study is often very flexible, with the option to study a Masters degree or other qualification part-time, online or through blended learning.

How do Bachelors and Masters courses differ? We’ve covered the main differences you’ll encounter when making the transition from undergrad to postgrad study.

Our guide explains how online Masters degree work, what the benefits of online learning are and how to choose what to study online.

Our guide tells you everything about the application process for studying a Masters in Italy.

Our guide tells you everything about the application process for studying a Masters in the USA.

FindAMasters. Copyright 2005-2024 All rights reserved.

Unknown    ( change )

Have you got time to answer some quick questions about Masters study?

Select your nearest city

• Aberystwyth
• Beaconsfield
• Bishop Burton
• Bournemouth
• Bridlington
• Chatham Maritime
• Cirencester
• East Malling
• Hemel Hempstead
• High Wycombe
• Huddersfield
• Isle of Man
• Jordanstown
• London Central
• London East
• London South
• London West
• Londonderry
• Loughborough
• Middlesbrough
• Milton Keynes
• Musselburgh
• Northampton
• Potters Bar
• Saffron Waldon
• Scarborough
• Southampton
• St Leonards on Sea
• Stoke on Trent
• Wolverhampton

You haven’t completed your profile yet. To get the most out of FindAMasters, finish your profile and receive these benefits:

• Monthly chance to win one of ten £10 Amazon vouchers ; winners will be notified every month.*
• Access to our £6,000 scholarship competition
• Weekly newsletter with funding opportunities, application tips and much more
• Early access to our physical and virtual postgraduate study fairs

Or begin browsing FindAMasters.com

or begin browsing FindAMasters.com

*Offer only available for the duration of your active subscription, and subject to change. You MUST claim your prize within 72 hours, if not we will redraw.

Do you want hassle-free information and advice?

Create your FindAMasters account and sign up to our newsletter:

• Find out about funding opportunities and application tips
• Receive weekly advice, student stories and the latest Masters news
• Hear about our upcoming study fairs
• Save your favourite courses, track enquiries and get personalised subject updates

Create your account

Looking to list your Masters courses? Log in here .

Let us help you find a Masters

Never miss a course

Enter our ambassador competition

Get funding news, tips and advice

Hear about upcoming events

Sign up to our newsletter today

We've been helping students find the right postgraduate course for over a decade.

Login to your account

Enter your username below to login to your account.

Thesis and Dissertation Guide

• « Thesis & Dissertation Resources
• The Graduate School Home

• Introduction

Copyright Page

Dedication, acknowledgements, preface (optional), table of contents.

• List of Tables, Figures, and Illustrations

List of Abbreviations

List of symbols.

• Non-Traditional Formats
• Font Type and Size
• Spacing and Indentation
• Tables, Figures, and Illustrations
• Formatting Previously Published Work
• Internet Distribution
• Open Access
• Registering Copyright
• Using Copyrighted Materials
• Use of Your Own Previously Published Materials
• Submission Steps
• Submission Checklist
• Sample Pages

I. Order and Components

Please see the sample thesis or dissertation pages throughout and at the end of this document for illustrations. The following order is required for components of your thesis or dissertation:

• Dedication, Acknowledgements, and Preface (each optional)
• Table of Contents, with page numbers
• List of Tables, List of Figures, or List of Illustrations, with titles and page numbers (if applicable)
• List of Abbreviations (if applicable)
• List of Symbols (if applicable)
• Introduction, if any
• Main body, with consistent subheadings as appropriate
• Appendices (if applicable)
• Endnotes (if applicable)
• References (see section on References for options)

Many of the components following the title and copyright pages have required headings and formatting guidelines, which are described in the following sections.

Please consult the Sample Pages to compare your document to the requirements. A Checklist is provided to assist you in ensuring your thesis or dissertation meets all formatting guidelines.

The title page of a thesis or dissertation must include the following information:

• The title of the thesis or dissertation in all capital letters and centered 2″ below the top of the page.
• Your name, centered 1″ below the title. Do not include titles, degrees, or identifiers. The name you use here does not need to exactly match the name on your university records, but we recommend considering how you will want your name to appear in professional publications in the future.

Notes on this statement:

• When indicating your degree in the second bracketed space, use the full degree name (i.e., Doctor of Philosophy, not Ph.D. or PHD; Master of Public Health, not M.P.H. or MPH; Master of Social Work, not M.S.W. or MSW).
• List your department, school, or curriculum rather than your subject area or specialty discipline in the third bracketed space. You may include your subject area or specialty discipline in parentheses (i.e., Department of Romance Languages (French); School of Pharmacy (Molecular Pharmaceutics); School of Education (School Psychology); or similar official area).
• If you wish to include both your department and school names, list the school at the end of the statement (i.e., Department of Pharmacology in the School of Medicine).
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the Department of Public Policy.
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the School of Dentistry (Endodontics).
• A thesis submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Master of Science in the Department of Nutrition in the Gillings School of Global Public Health.
• A dissertation submitted to the faculty at the University of North Carolina at Chapel Hill in partial fulfillment of the requirements for the degree of Doctor of Philosophy in the School of Education (Cultural Studies and Literacies).
• The words “Chapel Hill” must be centered 1″ below the statement.
• One single-spaced line below that, center the year in which your committee approves the completed thesis or dissertation. This need not be the year you graduate.
• Approximately 2/3 of the way across the page on the right-hand side of the page, 1″ below the year, include the phrase “Approved by:” (with colon) followed by each faculty member's name on subsequent double-spaced lines. Do not include titles such as Professor, Doctor, Dr., PhD, or any identifiers such as “chair” or “advisor” before or after any names. Line up the first letter of each name on the left under the “A” in the “Approved by:” line. If a name is too long to fit on one line, move this entire section of text slightly to the left so that formatting can be maintained.
• No signatures, signature lines, or page numbers should be included on the title page.

Include a copyright page with the following information single-spaced and centered 2″ above the bottom of the page:

© Year Author's Full Name (as it appears on the title page) ALL RIGHTS RESERVED

This page immediately follows the title page. It should be numbered with the lower case Roman numeral ii centered with a 1/2″ margin from the bottom edge.

Inclusion of this page offers you, as the author, additional protection against copyright infringement as it eliminates any question of authorship and copyright ownership. You do not need to file for copyright in order to include this statement in your thesis or dissertation. However, filing for copyright can offer other protections.

See Section IV for more information on copyrighting your thesis or dissertation.

Include an abstract page following these guidelines:

• Include the heading “ABSTRACT” in all capital letters, and center it 2″ below the top of the page.
• One double-spaced line below “ABSTRACT”, center your name, followed by a colon and the title of the thesis or dissertation. Use as many lines as necessary. Be sure that your name and the title exactly match the name and title used on the Title page.
• One single-spaced line below the title, center the phrase “(Under the direction of [advisor's name])”. Include the phrase in parentheses. Include the first and last name(s) of your advisor or formal co-advisors. Do not include the name of other committee members. Use the advisor's name only; do not include any professional titles such as PhD, Professor, or Dr. or any identifiers such as “chair” or “advisor”.
• Skip one double-spaced line and begin the abstract. The text of your abstract must be double-spaced and aligned with the document's left margin with the exception of indenting new paragraphs. Do not center or right-justify the abstract.
• Abstracts cannot exceed 150 words for a thesis or 350 words for a dissertation.
• Number the abstract page with the lower case Roman numeral iii (and iv, if more than one page) centered with a 1/2″ margin from the bottom edge.

Please write and proofread your abstract carefully. When possible, avoid including symbols or foreign words in your abstract, as they cannot be indexed or searched. Avoid mathematical formulas, diagrams, and other illustrative materials in the abstract. Offer a brief description of your thesis or dissertation and a concise summary of its conclusions. Be sure to describe the subject and focus of your work with clear details and avoid including lengthy explanations or opinions.

Your title and abstract will be used by search engines to help potential audiences locate your work, so clarity will help to draw the attention of your targeted readers.

You have an option to include a dedication, acknowledgements, or preface. If you choose to include any or all of these elements, give each its own page(s).

A dedication is a message from the author prefixed to a work in tribute to a person, group, or cause. Most dedications are short statements of tribute beginning with “To…” such as “To my family”.

Acknowledgements are the author's statement of gratitude to and recognition of the people and institutions that helped the author's research and writing.

A preface is a statement of the author's reasons for undertaking the work and other personal comments that are not directly germane to the materials presented in other sections of the thesis or dissertation. These reasons tend to be of a personal nature.

Any of the pages must be prepared following these guidelines:

• Do not place a heading on the dedication page.
• The text of short dedications must be centered and begin 2″ from the top of the page.
• Headings are required for the “ACKNOWLEDGEMENTS” and “PREFACE” pages. Headings must be in all capital letters and centered 2″ below the top of the page.
• The text of the acknowledgements and preface pages must begin one double-spaced line below the heading, be double-spaced, and be aligned with the document's left margin with the exception of indenting new paragraphs.
• Subsequent pages of text return to the 1″ top margin.
• The page(s) must be numbered with consecutive lower case Roman numerals (starting with the page number after the abstract) centered with a 1/2″ margin from the bottom edge.

Include a table of contents following these guidelines:

• Include the heading “TABLE OF CONTENTS” in all capital letters, and center it 2″ below the top of the page.
• Include one double-spaced line between the heading and the first entry.
• The table of contents should not contain listings for the pages that precede it, but it must list all parts of the thesis or dissertation that follow it.
• If relevant, be sure to list all appendices and a references section in your table of contents. Include page numbers for these items but do not assign separate chapter numbers.
• Entries must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Major subheadings within chapters must be included in the table of contents. The subheading(s) should be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, break up the entry about three-fourths of the way across the page and place the rest of the text on a second line, single-spacing the two lines.
• Include one double-spaced line between each entry.
• Page numbers listed in the table of contents must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Information included in the table of contents must match the headings, major subheadings, and numbering used in the body of the thesis or dissertation.
• The Table of Contents page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

Lists of Tables, Figures, and Illustrations

If applicable, include a list of tables, list of figures, and/or list of illustrations following these guidelines:

• Include the heading(s) in all capital letters, centered 1″ below the top of the page.
• Each entry must include a number, title, and page number.
• Assign each table, figure, or illustration in your thesis or dissertation an Arabic numeral. You may number consecutively throughout the entire work (e.g., Figure 1, Figure 2, etc.), or you may assign a two-part Arabic numeral with the first number designating the chapter in which it appears, separated by a period, followed by a second number to indicate its consecutive placement in the chapter (e.g., Table 3.2 is the second table in Chapter Three).
• Numerals and titles must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• Page numbers must be located just inside the right page margin with leaders (lines of periods) filling out the space between the end of the entry and the page number. The last digit of each number must line up on the right margin.
• Numbers, titles, and page numbers must each match the corresponding numbers, titles, and page numbers appearing in the thesis or dissertation.
• All Lists of Tables, Figures, and Illustrations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use abbreviations extensively in your thesis or dissertation, you must include a list of abbreviations and their corresponding definitions following these guidelines:

• Include the heading “LIST OF ABBREVIATIONS” in all capital letters, and center it 1″ below the top of the page.
• Arrange your abbreviations alphabetically.
• Abbreviations must align with the document's left margin or be indented to the right of the left page margin using consistent tabs.
• If an entry takes up more than one line, single-space between the two lines.
• The List of Abbreviations page(s) must be numbered with consecutive lower case Roman numerals centered with a 1/2″ margin from the bottom edge.

If you use symbols in your thesis or dissertation, you may combine them with your abbreviations, titling the section “LIST OF ABBREVIATIONS AND SYMBOLS”, or you may set up a separate list of symbols and their definitions by following the formatting instructions above for abbreviations. The heading you choose must be in all capital letters and centered 1″ below the top of the page.

Previous: Introduction

Next: Format

Transcription Service for Your Academic Paper

Start Transcription now

Editing & Proofreading for Your Research Paper

Get it proofread now

Online Printing & Binding with Free Express Delivery

Configure binding now

• Academic essay overview
• The writing process
• Structuring academic essays
• Types of academic essays
• Academic writing overview
• Sentence structure
• Academic writing process
• Improving your academic writing
• Titles and headings
• APA style overview
• APA citation & referencing
• APA structure & sections
• Citation & referencing
• Structure and sections
• APA examples overview
• Commonly used citations
• Other examples
• British English vs. American English
• Chicago style overview
• Chicago citation & referencing
• Chicago structure & sections
• Chicago style examples
• Citing sources overview
• Citation format
• Citation examples
• College essay overview
• Application
• How to write a college essay
• Types of college essays
• Commonly confused words
• Definitions
• Dissertation overview
• Dissertation structure & sections
• Dissertation writing process
• Graduate school overview
• Application & admission
• Study abroad
• Master degree
• Harvard referencing overview
• Language rules overview
• Grammatical rules & structures
• Parts of speech
• Punctuation
• Methodology overview
• Analyzing data
• Experiments
• Observations
• Inductive vs. Deductive
• Qualitative vs. Quantitative
• Types of validity
• Types of reliability
• Sampling methods
• Theories & Concepts
• Types of research studies
• Types of variables
• MLA style overview
• MLA examples
• MLA citation & referencing
• MLA structure & sections
• Plagiarism overview
• Plagiarism checker
• Types of plagiarism
• Printing production overview
• Research bias overview
• Types of research bias
• Example sections
• Types of research papers
• Research process overview
• Problem statement
• Research proposal
• Research topic
• Statistics overview
• Levels of measurment
• Frequency distribution
• Measures of central tendency
• Measures of variability
• Hypothesis testing
• Parameters & test statistics
• Types of distributions
• Correlation
• Effect size
• Hypothesis testing assumptions
• Types of ANOVAs
• Types of chi-square
• Statistical data
• Statistical models
• Spelling mistakes
• Tips overview
• Academic writing tips
• Dissertation tips
• Sources tips
• Working with sources overview
• Evaluating sources
• Finding sources
• Including sources
• Types of sources

Your Step to Success

Transcription Service for Your Paper

Printing & Binding with 3D Live Preview

How To Write An Abstract

How do you like this article cancel reply.

Save my name, email, and website in this browser for the next time I comment.

Inhaltsverzeichnis

• 1 Definition: Abstract
• 4 Abstract in Different Languages
• 5 Abstract vs. Conclusion
• 6 In a Nutshell

Definition: Abstract

An abstract is a short summary of a research paper. It is not part of the actual text and must be included at the very beginning of your work. It does not show up in the structure and the table of contents of your thesis.

You write an abstract to give a brief account of the most important information relating to the research background, structure, method, data analysis, and results of your research paper. The abstract should not create suspense: Making it very clear early on what your results are will help the reader evaluate the relevance of your paper.

What is an abstract?

An abstract is a short summary written at the beginning of a research paper . It highlights the main ideas of your academic project. Your research methods, data analysis, results plus any background information relating to your research should be included in the abstract.

Why do I need an abstract?

An abstract is nescessary, as it helps the reader to decide whether the results and methods of a particular paper are relevant to them or whether it is worthwhile for them to read the whole paper. It effectively creates the first impression of the thesis or essay. It is also very useful for fellow researchers in the academic community, as they can decide upon first glance whether or not the paper can be useful or relevant to their personal research project.

Where does the abstract belong?

The abstract is to be put at the beginning of your writing project. It should appear between the title page and the table of contents page of the research paper. If you’re writing a thesis with an acknowledgements page, then the abstract is placed after the acknowledgements.

When do I write the abstract?

The abstract should be the very last thing you write during the academic writing process. This is because it is only possible to come up with a precise summary of your work once you have written the whole research paper . Using this same logic, the conclusion should also be one of the very last paragraphs that you write.

How long should an abstract be?

The abstract should be between one third of a page and one full page in length. However, this depends on the length of the paper that you’re writing. For a smaller research paper, 100 words is sufficient. For a bachelor’s thesis, or a master’s thesis, the abstract should be between 1 or 2 pages. But it should definitely not exceed 2 pages!

Tip: Take a look at some abstract examples for inspiration!

What is included in an abstract?

A top-quality abstract will include a brief explanation of the following aspects:

1. Background and purpose 2. Overarching research question 3. Gap in literature and methods used to address the gap in literature 4. Main results of the writing project 5. Interpretation or conclusion of the thesis statement Each of these points should be addressed in only a few sentences.

Is an abstract international?

It doesn’t matter which language you write your abstract in, an English translation of your abstract is often required. The reason for this is so that the results of your research paper can be reviewed by an international audience.

Also useful: What is plagiarism?

How to Write an Abstract: The Content

There is one thing you must understand about how to write an abstract:

The abstract should contain important aspects of the paper, like the

• research question ,
• limitations,
• study design,
• main results,
• main idea or message,
• key interpretations,
• implications,
• and validity (cf. Schnur 2005, as quoted in Theisen 2013: 101).

How to Write an Abstract: Structure

The abstract follows the same structure as your paper:

(cf. Kruse 2007: 186)

How to Write an Abstract: Goal

“An abstract is a very precise summary of your whole paper”

You might have heard the term ‘summary’ referring to an abstract of a research paper (cf. Oertner, St. John, & Thelen 2014: 93). However, do not make the mistake of assuming that an abstract is something rather general. You would be on the wrong track. When asked to write an abstract for your bachelor’s or master’s thesis, you are expected to deliver a very precise summary of your whole paper.

An abstract’s right to exist is founded in its purpose of helping a potential reader to quickly find out if it is worthwhile to read the whole paper (cf. Rossig & Prätsch 2005: 89). For this reason, an abstract has to offer everything the reader needs in order to evaluate the relevance of a research paper for their own work. It is the ultimate way of advertising your research.

You can save yourself a lot of work and trouble if you concentrate on reading the abstracts of published papers first; most papers these days provide abstracts (cf. Oertner, St. John, & Thelen 2014: 80). If you take your time to thoroughly read the abstracts, you will be able to judge whether a particular article will help you to support your line of argumentation. If not, then just move on the next article. You can check out the sample abstracts in this blog entry to get a better idea of how to write an abstract and what an abstract looks like.

“Through reading an abstract, you can find out if a paper arouses your interest or is relevant for your studies.”

How to Write an Abstract: Length 

An abstract is a summary of a publication or an article on one third of a DIN-A4 page (cf. Kruse 2007: 185). Stickel-Wolf & Wolf provide a rough guideline for the word count: They say that an abstract should not contain more than 100 words (cf. 2013: 249).

Note: Generally speaking, an abstract for a bachelor’s or master’s thesis should not exceed one page, and the absolute maximum is two pages (cf. Rossig & Prätsch 2005: 89). The reason for this is self-explanatory: The purpose of the abstract is to offer a quick overview of, for example, a 60- or 80-page paper.

Abstract Example 1: English abstract addressing the main points of your paper

Abstract Example 2: English abstract of a master’s thesis with keywords

Recommended: Harvard Referencing

Printing Your Thesis With BachelorPrint

• High-quality bindings with customizable embossing
• 3D live preview to check your work before ordering
• Free express delivery

Configure your binding now!

to the print shop

When to Write the Abstract and Where to Put It

You are probably wondering where the abstract should be placed in your research paper: at the beginning or towards the end? It is common to include the abstract right at the beginning (cf. Rossig & Prätsch 2005: 89; Samac, Prenner, & Schwetz 2009: 56). As we have established, it is a helpful tool for the reader to get an overview of the whole paper as early as possible. It is good to know what will follow. So, it would not be logical to put it at the end, right? Stickel-Wolf and Wolf recommend embedding the abstract in between the title page and the table of contents (cf. 2013: 249).

The next question about ‘How to write an abstract’ is a bit trickier. When is the right time to write the abstract? Given that it is to be added at the very beginning, before the actual text, you might think it is the first thing you are supposed to write. However, you will not be able to write a clear-cut and precise summary at a stage when you do not even know what you are summarizing. Therefore, you can only write the abstract after you have written the whole paper. How else would you know enough about your results to give a complete record of your whole work (cf. Rossig & Prätsch 2005: 89)?

Note: You can draw essential information to write your abstract from your conclusion, as this part briefly repeats the research questions and provides an evaluative summary of the results (cf. Stickel-Wolf 2013: 249).

Abstract in Different Languages

The question of how to write an abstract is popular not just in an English-speaking context.

It increasingly concerns international students as well. Nowadays, it is becoming more and more important to write the whole paper in English, rather than in the native language of the country a student studies in. Indeed, many papers are still written in the native language of the country.

But your research paper not being written in English does not mean that this also holds true for the abstract. Often, the student needs to write an abstract in not only German, Spanish, or French (depending on the country you study in) but also English.

An English abstract (in addition to, say, a German abstract) is necessary to ensure that a research paper will be accessible to an international market.

Sometimes, only an English abstract is required. Also, as Samac, Prenner, and Schwetz point out, an English translation of the German text (if your thesis is in German) must be provided on the very same page to meet international standards (2009: 56).

Example of an abstract in German and English

Note: Academic English is quite a bit different from academic German, Spanish, and other languages. We recommend that you read research papers in English to get a feel for the differences in style and structure (cf. Karmasin & Ribing 2014: 45).

Abstract vs. Conclusion

Caution: The abstract is NEVER a conclusion of your research paper and it differs from the conclusion in many aspects. Make sure to read the sample abstracts provided on this page to get a good grasp on the major differences between the abstract and the conclusion.

Assignment Printing & Binding

You are already done writing your assignment and need a high quality printing & binding service? Then you are right to choose BachelorPrint! Check out our 24-hour online printing service. For more information click the button below :

In a Nutshell

• An abstract is a short summary of a research paper. It is embedded between the title page and the table of contents , and appears before the actual text.
• The abstract should not exceed one page (at the most, two pages). Ideally, it should fit on a single page.
• An abstract is a brief account of your paper. It provides information about the structure, argumentation, method, and results of your research paper (cf. Oertner, St. John, & Thelen 2014: 93).
• The aim of writing an abstract is to make it possible for the reader to quickly evaluate the relevance of your work without having to read much. Also, reading abstracts makes your life easier when you are doing research. You can decide which paper is worth reading and which one is not, just based on the abstract.
• There is a clear difference between the abstract and the conclusion. The abstract is shorter, can be read independently of the text, and does not contain evaluations of the author which are not already part of the text (cf. Kruse 2007: 186).
• Writing an English abstract or providing an English translation of your abstract is becoming increasingly important and popular. In this way, your research can be made internationally accessible.

Works cited

Karmasin, Matthias, & Rainer Ribing. 2014. Die Gestaltung wissenschaftlicher Arbeiten . 8th Edition. Vienna: Facultas.

Kruse, Otto. 2007. Keine Angst vor dem leeren Blatt – Ohne Schreibblockaden durchs Studium . 12th Edition. Frankfurt: Campus.

Oertner, Monika, Illona St. John, & Gabriele Thelen. 2014. Wissenschaftlich Schreiben – Ein Praxisbuch für Schreibtrainer und Studierende. Paderborn: Wilhelm Fink.

Rossig, Wolfram E., & Joachim Prätsch. 2005. Wissenschaftliche Arbeiten . 5th Edition. Weyhe: PRINT-TEC.

Samac, Klaus, Monika Prenner, & Herbert Schwetz. 2009. Die Bachelorarbeit an Universität und Fachhochschule. Vienna: Facultas.

Stickel-Wolf, Christine, & Joachim Wolf. 2013. Wissenschaftliches Arbeiten und Lerntechniken – Erfolgreich studieren – gewusst wie! 7th Edition. Wiesbaden: Springer Gabler.

Theisen, Manuel René. 2013. Wissenschaftliches Arbeiten – Erfolgreich bei Bachelor- und Masterarbeit . Munich: Franz Vahlen.

Extremely satisfied, excellent deal with delivery in less than 24h. The print...

We use cookies on our website. Some of them are essential, while others help us to improve this website and your experience.

• External Media

Individual Privacy Preferences

Cookie Details Privacy Policy Imprint

Here you will find an overview of all cookies used. You can give your consent to whole categories or display further information and select certain cookies.

Accept all Save

Essential cookies enable basic functions and are necessary for the proper function of the website.

Show Cookie Information Hide Cookie Information

Statistics cookies collect information anonymously. This information helps us to understand how our visitors use our website.

Content from video platforms and social media platforms is blocked by default. If External Media cookies are accepted, access to those contents no longer requires manual consent.

Privacy Policy Imprint

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• Dissertation & Thesis Outline | Example & Free Templates

Dissertation & Thesis Outline | Example & Free Templates

Published on June 7, 2022 by Tegan George . Revised on November 21, 2023.

A thesis or dissertation outline is one of the most critical early steps in your writing process . It helps you to lay out and organize your ideas and can provide you with a roadmap for deciding the specifics of your dissertation topic and showcasing its relevance to your field.

Generally, an outline contains information on the different sections included in your thesis or dissertation , such as:

• Your anticipated title
• Your abstract
• Your chapters (sometimes subdivided into further topics like literature review, research methods, avenues for future research, etc.)

In the final product, you can also provide a chapter outline for your readers. This is a short paragraph at the end of your introduction to inform readers about the organizational structure of your thesis or dissertation. This chapter outline is also known as a reading guide or summary outline.

Table of contents

How to outline your thesis or dissertation, dissertation and thesis outline templates, chapter outline example, sample sentences for your chapter outline, sample verbs for variation in your chapter outline, other interesting articles, frequently asked questions about thesis and dissertation outlines.

While there are some inter-institutional differences, many outlines proceed in a fairly similar fashion.

• Working Title
• “Elevator pitch” of your work (often written last).
• Introduce your area of study, sharing details about your research question, problem statement , and hypotheses . Situate your research within an existing paradigm or conceptual or theoretical framework .
• Subdivide as you see fit into main topics and sub-topics.
• Describe your research methods (e.g., your scope , population , and data collection ).
• Present your research findings and share about your data analysis methods.
• Answer the research question in a concise way.
• Interpret your findings, discuss potential limitations of your own research and speculate about future implications or related opportunities.

For a more detailed overview of chapters and other elements, be sure to check out our article on the structure of a dissertation or download our template .

To help you get started, we’ve created a full thesis or dissertation template in Word or Google Docs format. It’s easy adapt it to your own requirements.

 Download Word template    Download Google Docs template

It can be easy to fall into a pattern of overusing the same words or sentence constructions, which can make your work monotonous and repetitive for your readers. Consider utilizing some of the alternative constructions presented below.

Example 1: Passive construction

The passive voice is a common choice for outlines and overviews because the context makes it clear who is carrying out the action (e.g., you are conducting the research ). However, overuse of the passive voice can make your text vague and imprecise.

Example 2: IS-AV construction

You can also present your information using the “IS-AV” (inanimate subject with an active verb ) construction.

A chapter is an inanimate object, so it is not capable of taking an action itself (e.g., presenting or discussing). However, the meaning of the sentence is still easily understandable, so the IS-AV construction can be a good way to add variety to your text.

Example 3: The “I” construction

Another option is to use the “I” construction, which is often recommended by style manuals (e.g., APA Style and Chicago style ). However, depending on your field of study, this construction is not always considered professional or academic. Ask your supervisor if you’re not sure.

Example 4: Mix-and-match

To truly make the most of these options, consider mixing and matching the passive voice , IS-AV construction , and “I” construction .This can help the flow of your argument and improve the readability of your text.

As you draft the chapter outline, you may also find yourself frequently repeating the same words, such as “discuss,” “present,” “prove,” or “show.” Consider branching out to add richness and nuance to your writing. Here are some examples of synonyms you can use.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Anchoring bias
• Halo effect
• The Baader–Meinhof phenomenon
• The placebo effect
• Nonresponse bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

When you mention different chapters within your text, it’s considered best to use Roman numerals for most citation styles. However, the most important thing here is to remain consistent whenever using numbers in your dissertation .

The title page of your thesis or dissertation goes first, before all other content or lists that you may choose to include.

A thesis or dissertation outline is one of the most critical first steps in your writing process. It helps you to lay out and organize your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

• Your chapters (sometimes subdivided into further topics like literature review , research methods , avenues for future research, etc.)

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. (2023, November 21). Dissertation & Thesis Outline | Example & Free Templates. Scribbr. Retrieved August 26, 2024, from https://www.scribbr.com/dissertation/dissertation-thesis-outline/

Is this article helpful?

Tegan George

Other students also liked, dissertation table of contents in word | instructions & examples, figure and table lists | word instructions, template & examples, thesis & dissertation acknowledgements | tips & examples, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

/images/cornell/logo35pt_cornell_white.svg" alt="abstract for master thesis"> Cornell University --> Graduate School

Required sections, guidelines, and suggestions.

Beyond those noted on the Formatting Requirements page , the Graduate School has no additional formatting requirements. The following suggestions are based on best practices and historic requirements for dissertations and theses but are not requirements for submission of the thesis or dissertation. The Graduate School recommends that each dissertation or thesis conform to the standards of leading academic journals in your field.

For both master’s and doctoral students, the same basic rules apply; however, differences exist in some limited areas, particularly in producing the abstract and filing the dissertation or thesis.

• Information in this guide that pertains specifically to doctoral candidates and dissertations is clearly marked with the term “ dissertation ” or “ doctoral candidates .”
• Information pertaining specifically to master’s candidates and theses is clearly marked with the term “ thesis ” or “ master’s candidates .”
• All other information pertains to both.

Examples of formatting suggestions for both the dissertation and thesis are available as downloadable templates .

Required? Yes.

Suggested numbering: Page included in overall document, but number not typed on page.

The following format for your title page is suggested, but not required.

• The title should be written using all capital letters, centered within the left and right margins, and spaced about 1.5 inches from the top of the page. (For an example, please see the template .)
• Carefully select words for the title of the dissertation or thesis to represent the subject content as accurately as possible. Words in the title are important access points to researchers who may use keyword searches to identify works in various subject areas.
• Use word substitutes for formulas, symbols, superscripts, Greek letters, etc.
• Below the title, at the vertical and horizontal center of the margins, place the following five lines (all centered):

Line 1: A Dissertation [or Thesis]

Line 2: Presented to the Faculty of the Graduate School

Line 3: of Cornell University

Line 4: in Partial Fulfillment of the Requirements for the Degree of

Line 5: Doctor of Philosophy [or other appropriate degree]

• Center the following three lines within the margins:

Line 2: Primary or Preferred Name [as registered with the University Registrar’s Office and displayed in Student Center]

Line 3: month and year of degree conferral [May, August, December; no comma between month and year]

Copyright Page

Suggested numbering: Page included in overall document, but number not typed on page

The following format for your copyright page is suggested, but not required.

• A notice of copyright should appear as the sole item on the page centered vertically and horizontally within the margins: © 20__ [Primary or Preferred Name [as registered with the University Registrar’s Office]. Please note that there is not usually a page heading on the copyright page.
• The copyright symbol is a lowercase “c,” which must be circled. (On Macs, the symbol is typed by pressing the “option” and “g” keys simultaneously. If the font does not have the © symbol, type the “c” and circle it by hand. On PCs, in the insert menu, choose “symbol,” and select the © symbol.)
• The date, which follows the copyright symbol, is the year of conferral of your degree.
• Your name follows the date.

Required?  Yes.

Suggested numbering: Page(s) not counted, not numbered

Abstract formats for the doctoral dissertation and master’s thesis differ greatly. The Graduate School recommends that you conform to the standards of leading academic journals in your field.

Doctoral candidates:

• TITLE OF DISSERTATION
• Student’s Primary or Preferred Name, Ph.D. [as registered with the University Registrar’s Office]
• Cornell University 20__ [year of conferral]
• Following the heading lines, begin the text of the abstract on the same page.
• The abstract states the problem, describes the methods and procedures used, and gives the main results or conclusions of the research.
• The abstract usually does not exceed 350 words in length (about one-and-one-half correctly spaced pages—but not more than two pages).

Master’s candidate:

• In a thesis, the page heading is simply the word “ABSTRACT” in all capital letters and centered within the margins at the top of the page. (The thesis abstract does not display the thesis title, author’s name, degree, university, or date of degree conferral.)
• The abstract should state the problem, describe the methods and procedures used, and give the main results or conclusions.
• The abstract usually does not exceed 600 words in length, which is approximately two-and-one-half to three pages of correctly spaced typing.
• In M.F.A. theses, an abstract is not required.

Biographical Sketch

Suggested numbering: iii (may be more than one page)

• Type number(s) on page(s).

The following content and format are suggested:

• The biographical sketch is written in third-person voice and contains your educational background. Sometimes additional biographical facts are included.
• As a page heading, use “BIOGRAPHICAL SKETCH” in all capital letters, centered on the page.
• Number this page as iii.

Required? Optional.

Suggested numbering: iv (may be more than one page)

The dedication page is not required and can contain whatever text that you would like to include. Text on this page does not need to be in English.

Acknowledgements

Suggested numbering: v (may be more than one page)

The following content and format are suggested, not required.

• The acknowledgements may be written in first-person voice. If your research has been funded by outside grants, you should check with the principal investigator of the grant regarding proper acknowledgement of the funding source. Most outside funding sources require some statement of acknowledgement of the support; some also require a disclaimer from responsibility for the results.
• As a page heading, use “ACKNOWLEDGEMENTS” in all capital letters, centered on the page.

Table of Contents

Suggested numbering: vi (may be more than one page)

The following are suggestions.

• As a page heading, use “TABLE OF CONTENTS” in all capital letters and centered on the page.
• List the sections/chapters of the body of the dissertation or thesis. Also, list preliminary sections starting with the biographical sketch. (Title page, copyright page, and abstract are not listed.)
• For theses and dissertations, the conventional format for page numbers is in a column to the right of each section/chapter title. The first page of each chapter/section is stated with a single number. Table of contents usually do not include a range of page numbers, such as 7-22.
• The table of contents is often single-spaced.

Two-Volume Theses or Dissertations

If the dissertation or thesis consists of two volumes, it is recommended, but not required, that you list “Volume II” as a section in the table of contents.

List of Figures, Illustrations, and Tables

Suggested numbering: vii (may be more than one page)

• If included, type number(s) on page(s).

As described in the formatting requirements above, figures and tables should be consecutively numbered. The Graduate School recommends that you conform to the styles set by the leading academic journals in your field. The items below are formatting suggestions based on best practices or historic precedents.

Table of contents format:

• As a page heading, use “LIST OF FIGURES,” “LIST OF ILLUSTRATIONS,” or “LIST OF TABLES” in all capital letters, centered on the page.
• There should be separate pages for “LIST OF FIGURES,” “LIST OF ILLUSTRATIONS,” or “LIST OF TABLES” even if there is only one example of each.
• The list should contain enough of the titles or descriptions so readers can locate items using the list. (It may not be necessary to include entire figure/illustration/table captions.)
• The list should contain the page number on which each figure, illustration, or table is found, as in a table of contents.
• The list of figures/illustrations/tables may be single-spaced.

Page format:

• Figures/illustrations/tables should be placed as close as possible to their first mention in the text. They may be placed on a page with no text above or below, or placed directly into the text. If a figure/illustration/table is placed directly into the text, text may appear above or below the figure/illustration/table; no text may wrap around the figure/illustration/table.
• If a figure/illustration/table appears on a page without other text, it should be centered vertically within the page margins. Figures/illustrations/tables should not be placed at the end of the chapter or at the end of the dissertation or thesis.
• Figure/illustration/table numbering should be either continuous throughout the dissertation or thesis, or by chapter (e.g. 1.1, 1.2; 2.1, 2.2, etc.). The word “Figure,” “Illustration,” or “Table” must be spelled out (not abbreviated), and the first letter must be capitalized.
• A caption for a figure/illustration should be placed at the bottom of the figure/illustration. However, a caption for a table must be placed above the table.
• If the figure/illustration/table, not including the caption, takes up the entire page, the figure/illustration/table caption should be placed alone on the preceding page and centered vertically and horizontally within the margins. (When the caption is on a separate page, the List of Figures or List of Illustrations or List of Tables can list the page number containing the caption.)
• If the figure/illustration/table, not including the caption, takes up more than two pages, it should be preceded by a page consisting of the caption only. The first page of the figure/illustration/table must include the figure/illustration/table (no caption), and the second and subsequent pages must also include, at the top of the figure/illustration/table, words that indicate its continuance—for example, “Figure 5 (Continued)”—and on these pages the caption is omitted.
• If figures/illustrations/tables are too large, they may be reduced slightly so as to render a satisfactory product or they must either be split into several pages or be redone. If a figure/illustration/table is reduced, all lettering must be clear, readable, and large enough to be legible. All lettering, including subscripts, must still be readable when reduced 25% beyond the final version. All page margin requirements must be maintained. Page numbers and headings must not be reduced.
• While there are no specific rules for the typographic format of figure/illustration/table captions, a consistent format should be used throughout the dissertation or thesis.
• The caption of a figure/illustration/table should be single-spaced, but then captions for all figures/illustrations/tables must be single-spaced.
• Horizontal figures/illustrations/tables should be positioned correctly—i.e., the top of the figure/illustration/table will be at the left margin of the vertical page of the dissertation or thesis (remember: pages are bound on the left margin). Figure/illustration/table headings/captions are placed with the same orientation as the figure/illustration/table when they are on the same page as the figure/illustration/table. When they are on a separate page, headings and captions are always placed in vertical orientation, regardless of the orientation of the figure/illustration/table. Page numbers are always placed as if the figure/illustration/table was vertical on the page.

Photographs should be treated as illustrations. To be considered archival, photographs must be black-and-white. (If actual color photographs are necessary, they should be accompanied by black-and-white photographs of the same subject.) Color photos obtained digitally do not need to be accompanied by a black-and-white photograph. Make a high-resolution digital version of each photograph and insert it into your electronic document, following the guideline suggestions for positioning and margins.

Optional Elements

List of abbreviations.

As a page heading, use “LIST OF ABBREVIATIONS” in all capital letters, centered on the page.

List of Symbols

As a page heading, use “LIST OF SYMBOLS” in all capital letters, centered on the page.

Suggested numbering: xi (may be more than one page)

As a page heading, use “PREFACE” in all capital letters, centered on the page.

Body of the Dissertation or Thesis: Text

Suggested numbering: Begin page number at 1

• Text (required)
• Appendix/Appendices (optional)
• Bibliography, References, or Works Cited (required)

Please note that smaller font size may be appropriate for footnotes or other material outside of the main text. The following suggestions are based on best practice or historic precedent, but are not required.

• Chapter headings may be included that conform to the standard of your academic field.
• Textual notes that provide supplementary information, opinions, explanations, or suggestions that are not part of the text must appear at the bottom of the page as footnotes. Lengthy footnotes may be continued on the next page. Placement of footnotes at the bottom of the page ensures they will appear as close as possible to the referenced passage.

Appendix (or Appendices)

An appendix (-ces) is not required for your thesis or dissertation. If you choose to include one, the following suggestions are based on best practice or historic precedent.

• As a page heading, use “APPENDIX” in all capital letters, centered on the page.
• Place in an appendix any material that is peripheral, but relevant, to the main text of the dissertation or thesis. Examples could include survey instruments, additional data, computer printouts, details of a procedure or analysis, a relevant paper that you wrote, etc.
• The appendix may include text that does not meet the general font and spacing requirements of the other sections of the dissertation or thesis.

Bibliography (or References or Works Cited)

A bibliography, references, or works cited is required for your thesis or dissertation. Please conform to the standards of leading academic journals in your field.

• As a page heading, use “BIBLIOGRAPHY” (or “REFERENCES” or “WORKS CITED”) in all capital letters, centered on the page. The bibliography should always begin on a new page.
• Bibliographies may be single-spaced within each entry but should include 24 points of space between entries.

Suggested numbering: Continue page numbering from body

If you choose to include a glossary, best practices and historic precedent suggest using a page heading, use “GLOSSARY” in all capital letters, centered on the page.

Suggested numbering: Continue page numbering from glossary

If you choose to include one, best practices and historic precedent suggest using a page heading, use “INDEX” in all capital letters, centered on the page.

Font Samples

Sample macintosh fonts.

• Palatino 12
• Garamond 14
• New Century School Book
• Helvetica 12 or Helvetica 14
• Times New Roman 12
• Times 14 (Times 12 is not acceptable)
• Symbol 12 is acceptable for symbols

Sample TeX and LaTeX Fonts

• CMR 12 font
• Any font that meets the above specifications

Sample PC Fonts

• Helvetica 12

We use cookies to ensure that we give you the best experience on our website. By continuing to browse this repository, you give consent for essential cookies to be used. You can read more about our Privacy and Cookie Policy .

• Departments
• University Research
• About the University

Artificial intelligence to detect and forecast earthquakes

ONG, VEDA,LYE,SIM (2021) Artificial intelligence to detect and forecast earthquakes. Masters thesis, Durham University.

Precursors to large earthquakes have been widely but not systematically identified. The ability of deep neural networks to solve complex tasks that involve generalisations makes them highly suited to earthquake and precursor detection. Large moment magnitude (Mw) earthquakes and associated tsunamis can have a huge economic and social impact. Detecting precursors could significantly improve seismic hazard preparedness, particularly if precursors can assist, within a more general probabilistic forecasting framework, in reducing the uncertainty interval on expected earthquakes’ timing, location and Mw. Additionally, artificial intelligence has recently been used to improve the detection and location of smaller earthquakes, assisting in the completion and automation of seismic catalogues. This paper is the first to present a deep learning-based solution for detecting and identifying short-term changes in the raw seismic signal, correlated to earthquake occurrence. Deep neural networks (DNNs) were employed to investigate the background seismic signal prior to 31 Mw >= 6 earthquakes in the Japan region. Instantaneous, precursor-related features (features correlated to the investigated earthquakes) were detected as opposed to predicting future values based on previously observed values in the case of time series forecasting. The network achieved a 98% train accuracy and a 96% test accuracy classifying noise unrelated to Mw >= 6 earthquakes from signal immediately prior to the investigated earthquakes. Additionally, the precursor-related features became increasingly systematic (more frequently detected prior to the investigated earthquakes) with earthquake proximity. Discriminative features appeared most dominant over a frequency range of ~ 0.1-0.9 Hz, coinciding with microseismic noise and recent observations of broadband slow earthquake signal (Masuda et al. 2020). In particular, frequencies of ~ 0.16 and ~ 0.21 Hz provided significant precursor-related information. Deep learning successfully detected features of the seismic data correlated to earthquake occurrence. Developing a better understanding of the origin of the precursor-related features and their reliability is the next step towards establishing an earthquake forecasting system.

Quick links

• Latest additions
• Browse by year
• Browse by department
• Deposit thesis
• Usage statistics

Prospective students

• International students
• Research degrees
• Durham e-Theses
• Deposit Guide

Last Modified: Summer 2013 | Disclaimer | Trading name | Powered by EPrints 3