online refresher course working at heights

• STUDENT INFO

RIIWHS204E WORK SAFELY AT HEIGHTS - ONLINE REFRESHER COURSE

10% OFF : $126.00

COURSE OVERVIEW

This Nationally Accredited Training course is 100% online and can be completed when it is convenient for you. On successful completion you will receive a Statement of Attainment and wallet card.

The course is available for those who have completed their RIIWHS204E Work Safely at Heights or RIIWHS204D Work Safely at Heights training within the past 5 years have maintained their skills, knowledge, competency and need to renew in line with industry and workplace standards.

This unit describes the skills and knowledge required to work safely at heights in the resources and infrastructure industries.

The normal course fee is $140 P/P currently on special until the end of this month for $126 P/P. (No additional costs apply)

PLEASE READ THE FOLLOWING ENTRY REQUIREMENTS IF YOU DO NOT MEET THE ENTRY REQUIREMENTS PLEASE DO NOT ENROL AS FEES WILL APPLY, payment, declarations, and evidence are supplied during your online enrolment. Providing all entry requirements will ensure we can validate your evidence as quickly as possible, once validated and complete we will unlock your online course you will then have full access to your online course 24/7. Provide a copy of your VET Transcript complete with QR Code listing either RIIWHS204E Work Safely at Heights or RIIWHS204D Work Safely at Heights issued within the past 5 years. Refer VET Transcript section below for further instructions. We can’t use your old Certificate/ Statement of Attainment/ Wallet card as evidence for your previous course VET Transcript with QR code only. Provide your valid USI (Unique Student Identifier) number when completing your enrolment. Refer Unique Student Identifier (USI) section below for further instructions. Provide a clear copy of your valid ID front and back. This can include your (Driver’s License, Proof of Age card, or Passport. Be a minimum of 18 years of age. Declare you have maintained your skills, knowledge, competency for this course since completing this course within the past 5 years. READING: Identifies and interprets information from workplace procedures, documentation, and regulations. WRITING: Produces and completes written documents required for workplace procedures. Maintain records of tests and results. ORAL COMMUNICATION: Uses a range of communication techniques and systems to communicate with others. Communicate required actions. INFORMATION TECHNOLGY: Ability to use a computer, laptop, tablet, smartphone. Ability to obtain VET Transcript complete with QR code. Ability to send and receive emails. If English is a second language for participants or has any concerns with Language literacy and or numeracy or any other learning challenges or needs, you should discuss with the administration team prior to enrolment and trainer assessor prior to the course commencement. Email  [email protected]  or Phone 08 89 324220

It will take you between 2 and 4 hours to successfully complete each unit of competency. You are required to complete this course in full within 60 days of enrolment.

To complete your online course, view the online training material, and answer the learning questions as you go. You will then need to complete your online assessment activities. The course can be completed over as many sessions as you need, and your work is saved as you go. Learning and assessment include: · Short answer questions. · Written multiple choice questions.

On successful completion of this course, you will receive a Statement of Attainment for RIIWHS204E WORK SAFELY AT HEIGHTS. This course is Nationally Accredited Training our RTO Registered Training Organisation number is 45735.

As this is an online course you will need either a computer or mobile phone, or tablet with internet access you will also need an email address unique to yourself, two students can not share the same email address. You will also receive a complimentary PDF version of the learning material and a copy of the AMS Student handbook.

AMS Training offers these courses 100% online.

For trainer online course support email is best, we are available from 7am CST to 7pm CST, 7 days a week public holidays may impact. email  [email protected]. Our admin team is available between 8am CST to 4pm CST Monday to Friday email  [email protected]  phone 0889324220.

The AMS Training student handbook is made available to all future students prior to enrolment. It’s located under the student info tab found in the top navigation bar. Or found via the following link;  https://amstraining.com.au/student-info/  . A copy will also be emailed to you as part of your enrolment.

Your VET Transcript lists your previous nationally accredited training it commenced 1/1/2015 so if your training was completed before 1/1/2015 it will not show on your VET Transcript.

When getting your VET Transcript be sure to set a viewable date this will ensure the QR code is displayed allowing AMS Training to verify your evidence is true and correct.

To download your VET Transcript, complete with QR code go to the USI Student Portal and follow the instructions. https://portal.usi.gov.au/student/TermsAndConditions?ReturnUrl=%252fstudent%252fUsi%252fForgotten%252fSuccess

If you need help to download your VET Transcript complete with QR code, please call the USI Team on 1300 857 536 you will need to request a copy of your VET Transcript advise them it needs to include your QR Code and ask them to email it to yourself. Once received email us a copy.

A USI is your individual education number for life. It also gives you an online record of your VET, Vocational education and training undertaken in Australia. Students must have a unique student identifier (USI) to obtain their nationally accredited Statement of Attainment.

To apply for a USI number, go to  www.usi.gov.au . If you have undertaken any VET training since 2015, you may already have a USI. Find it now  https://www.usi.gov.au/

Full details of our complaints and appeals process are included in our Learner Handbook, available from  https://amstraining.com.au/student-info/ .

Information regarding cancellations can be obtained in our Learner Handbook, available from  https://amstraining.com.au/student-info/

A NEW ONE STEP PROCESS

Our new one-step process allows you to enroll multiple students in a single process and ensures your staff or contractors have up-to-date certificates required for their employment and your company’s compliance for safety.

Once you complete the online enrolment & payment arrangements, we email each student a link to complete their enrolment and their course. We’ll advise you when each student completes their course and the result.

WEEKEND CLASS OPTIONS ARE NOW AVAILABLE

We all get busy during the week. Great news AMS Training offer weekend courses. Options available include public weekend Forklift and EWP courses.

We also offer weekend courses and Verification of Competency VOC for group bookings.

Check our online calendar to see courses and dates.

Office: 1/22 Beresford Road Yarrawonga NT 0830 

Copyright 2023 AMS Training

Work Safely at Heights - Online Refresher Course View Course Details

Work safely at heights - face to face refresher course view course details, work safely at heights - new student view course details, online refresher course work safely at heights, qualification/uoc code and title, qualification description - work safely at heights training.

• Perform inspection on height safety equipment
• Wear and maintain height safety equipment
• Select a suitable anchorage point and how to safety use it
• Install and use fall arrest and fall restraint system
• Store and care for necessary equipment
• Identify appropriate rescue procedures
• Understand legislation, Australian Standards and Codes of Practice relevant to working and being safe at various heights and fall prevention equipment. What is credit transfer? Credit transfer is an administrative process, where a training provider recognises and accepts Australian Qualifications Framework (AQF) qualifications and statements of attainment issued by another registered training organisation (RTO).   What is RPL? RPL is the acknowledgement of a person's skills and knowledge acquired through previous relevant training, work or life experience, which may be used to grant status or credit in a subject or a whole program (qualification).   What is competency-based training? Competency-based training is a method of training that focuses on a learner’s ability to receive, respond to and process information in order to achieve competency. It is geared to the attainment and demonstration of skills to meet industry-defined standards, rather than to a learner’s achievement relative to that of others.   What is competency-based assessment? Competency-based assessment is the process of collecting evidence and making judgements about whether a person has achieved competency. It is sometimes termed a criterion-referenced process, because it involves people being assessed against fixed criteria or pre-determined benchmarks – such as those expressed in units of competency.

Edit Content

Working at Heights Training Online (VOC Refresher RIIWHS204E)

Our Working at Heights Training Online - (VOC Refresher RIIWHS204E) is curated to upskill those who frequently work at elevated positions with the latest knowledge and safety procedures. It is used as a verification of competency and/or refresher training for those who have previously completed a nationally recognised working at heights course (typically RIIWHS204E or RIIWHS202D). The essence of this course is to augment your comprehension of the risks associated with working at heights and the best safety systems at your disposal.

Welcome to the Work Safely at Heights Refresher / Verification of Competency (VOC) Training. There are a large number of risks and dangers for anybody working at heights. This course has been designed to give you an understanding of these risks and the system in place to help keep you safe.

This course is designed for those who are required to work at heights as part of their role. The aim of the course is to give you a safe working philosophy for when you need to perform work at heights.

Features of this refresher training include:

- Download a VOC Certificate of Completion on successful completion

- A Digital Wallet ID VOC Card is also issued once all your documentation is verified (see 'John Citizen' sample)

- Verification of competency by our RTO partner, AlertForce RTO Code 91826.

This training addresses the theoretical component of working at heights. This training does not give you the practical skills required to perform work at heights. To achieve accreditation, you should complete an in-person training session with a trainer accredited to deliver work at heights training.

If you perform work at heights before completing your in-person training you could endanger your safety and the safety of those around you.

This course delivers the theoretical component of RIIWHS204D and the latest RIIWHS204E Work safely at heights and will provide you with information about:

• the legal requirements for working safely at heights and where you can find out more about them
• how to select, use and maintain fall protective and rescue equipment
• the process and procedures to follow to ensure you minimise risk, and
• how to plan for emergency situations

THIS IS NOT A NATIONALLY RECOGNISED COURSE - ONLY TO BE USED FOR REFRESHER PURPOSES IF YOU HAVE PREVIOUSLY ACHIEVED A STATEMENT OF ATTAINMENT in RIIWHS204D or RIIWHS204E. 

Note: Whilst a Statement of Attainments do not expire, different worksites have different policies and requirements of what refresher training should be and what is acceptable. Queensland sites, for example, typically want face to face only. You should check if you are unsure as there are no refunds available once you have downloaded certificates. This refresher course is a Verification of Competency undertaken by a Registered Training Organisation (RTO Code 91826).

What is covered during the course?

• the principles to bear in mind when working at heights
• safety procedures for work at heights
• risk assessment procedures
• fall protection equipment
• working at heights equipment, and
• emergency response

The equipment and tools we'll be discussing will include:

• anchor points
• lanyards and connecting equipment
• fall arrest devices
• fall protection
• elevating work platforms (EWPs)
• edge protections systems, and
• general equipment maintenance.

Activities and quizzes appear throughout the course and are part of your assessment. They must be successfully completed to complete the course.

A Certificate of Completion is issued on successful completion of the course and you are required to get an 80% pass mark to be deemed as understanding the content. It is recommended that training is conducted every 2 years to stay refreshed.

Entry requirements:

1. You must upload 100 points of ID

2. You must upload a previously issued with a Statement of Attainment (or wallet card) by an RTO less than 3 years ago or be able to present a CV that demonstrates industry currency.

NOTE: this training is suitable as refresher if you have previously obtained a Unit of Competency in any of these qualifications:

• RIIWHS204E Work Safely at Heights
• RIIWHS204D Work Safely at Heights
• RIIOHS204A Work Safely at Heights

You need to previously have held the RIIWHS204D Statement of Attainment (or unit listed above). That statement along with this Refresher Training serves as your refresher evidence. 

SKU: P-1972

Course Highlights:

• Instant Access
• Quality Focused
• Fast Certification
• Tax Deductable
• Trusted RTO Provider
• Verification of Competency
• Digital ID Certificate

Couldn't load pickup availability

"Very detailed information, with the ability to shuffle and skip past parts that I knew. I actually enjoyed doing it. I was refreshed after completing the course. All in all, a fantastic refresher course."

"Straight forward and easy to understand. Thanks, OHS this is my second Refresher course."

"Quick & relatively easy, done from the comfort of home."

"Really great courses on OHS website, would use this site again."

Learning Outcomes

• Understanding of Legal Requirements: You will gain a comprehensive understanding of the legal requirements related to working safely at heights, including knowledge of relevant Australian standards and risk assessment protocols.
• Equipment Selection and Usage: This course will provide you with the skills to select, use, and maintain the appropriate fall protection and rescue equipment, covering a range of equipment such as lanyards, harnesses, fall arrest devices, and more.
• Risk Minimisation Procedures: You'll learn the necessary procedures and processes to minimise risk when working at heights, which include conducting hazard eliminations and selecting reliable anchorage.
• Emergency Planning: The course teaches you how to plan for emergency situations when working at heights, ensuring that you're prepared for potential risks and can respond appropriately in case of an emergency.
• Harnessing Safety Procedures: Working at heights requires a solid understanding of safety procedures, such as safety protocols, focusing on fall restraint systems, work positioning systems, and fall arrest systems.
• Maintenance Knowledge: Our training course provides you with proper knowledge about equipment maintenance when working at heights, which is key to keeping your gear in top shape and ensuring safety.

ADDITIONAL EXTRA BONUSES with OHS.com.au

Claim up to $1271.95 worth of extra bonuses with every purchase.

• Your personal copy of Safety Legends E-Book (value $39.95)
• $100 off your first case from Naked Wines (value $100)
• Upto 350,000 Bonus AMEX Frequent Flyer points* (value $1000)
• Complimentary Access to two online courses** (value $132)

$1271.95 EXTRA VALUE - JUST FOR YOU INSIDE!

Who is it for.

This Working at Heights Training is designed for individuals whose job roles necessitate working at heights and who have previously achieved the RIIWHS204D, RIIWHS204E, or RIIOHS204A, Work Safely at Heights. It serves as a crucial tool for upskilling and refreshing their knowledge base in this domain.

Benefits to Organisations

Reduced Risk of Injury

Proper training in manual handling can significantly reduce the risk of workplace injuries related to lifting and moving patients or equipment. This not only protects staff but also reduces the potential costs and disruptions associated with these injuries.

Increased Staff Confidence

Employees who feel confident in their ability to perform their job safely and effectively are likely to have higher job satisfaction and morale, leading to a more positive work environment overall.

Increased Productivity

Staff who are trained in efficient manual handling techniques may be able to perform their duties more quickly and effectively, leading to an overall increase in productivity.

Compliance with Health and Safety Regulations

Providing this training helps ensure that the organisation is in compliance with health and safety regulations, potentially avoiding fines or sanctions.

Enhanced Reputation

An organisation that invests in the health and safety of its employees demonstrates a commitment to its staff's welfare, which can enhance its reputation among current employees, potential recruits, and the broader community.

Got multiple people needing to do a course? We will get back to you within a day!

COURSE OUTLINE

Our Working at Heights Training Online (VOC Refresher RIIWHS204E) is designed to reinforce safe work practices for tasks at heights. The curriculum addresses critical areas such as regulations and legislation, risk assessment, hazard elimination, and appropriate equipment selection. You'll explore how to establish reliable anchor systems and gain familiarity with fall restraint, work positioning, and fall arrest systems. In addition, this course offers a focused segment on ladder safety. Overall, this Working at Heights course equips you with the necessary theoretical understanding to manage and mitigate the risks associated with working at heights.

COURSE STRUCTURE

Identify requirements for working at heights.

• Understanding the legal requirements for working safely at heights
• Overview of Australian Standards and Regulations related to heights
• Reviewing the employer guidelines and site procedures

Identify Scope of Work and Manage Hazards

• Conducting comprehensive risk assessments
• Implementing effective hazard elimination strategies
• Understanding how to handle different workplace situations and scenarios

Organise Tools Equipment and Safety Systems

• Selection and correct use of appropriate equipment
• Setting up reliable anchor systems
• Managing fall restraint, work positioning, and fall arrest systems
• Utilising energy-absorbing lanyards effectively
• Ensuring correct use of ladders and maintaining ladder safety training

Perform Work at Heights and Finalise Operations

• Advice on risk control methods for the type of work to be undertaken
• Testing rescue plans and adhering to rescue law requirements
• Completing operations in accordance with safety standards and best practices

RIIWHS204E Work Safely at Heights Training

• Ensuring competency in the theoretical component of RIIWHS204E Work Safely at Heights
• Verification of competency undertaken by our partner RTO, AlertForce RTO Code 91826
• Continuous access to our online learning platform and dedicated Online Faculty
• Scenario-driven learning for effective comprehension and application of knowledge
• Possibility to customise the course to suit unique workplace requirements

Our course lays the groundwork with the theoretical components of RIIWHS204D and the updated RIIWHS204E, Work Safely at Heights. It is designed as a stepping stone to prepare you for hands-on skills training, a prerequisite for accreditation to be completed in a separate session.

This is not a nationally recognised course. It functions as a refresher course designed to renew and verify your competency when working at heights. It is advisable for individuals to undergo this refresher training every two years. Upon successful completion of this course, you will receive a Verification of Competency (VOC) issued by our partner RTO AlertForce (Code 91826) This certificate is not nationally recognised, but is widely acceptable by many organisations as suitable refresher training, demonstrating that you have been deemed refreshed in the necessary skills and knowledge associated with confined space work. As part of the VOC process you are required to produce evidence of previous Nationally Recognised training and/or industry participation.

Your comprehension of the course material will be evaluated through activities and quizzes, which form part of your overall assessment. A pass mark of 80% is necessary to demonstrate understanding and mark successful completion of the course.

Participants are required to upload 100 points of ID and a previously issued Statement of Attainment (or wallet card) by an RTO not more than 3 years ago, or present a CV showcasing industry relevance.

Upon successful completion of the course, a VOC Certificate of Completion will be downloadable. Additionally, a Digital Wallet ID VOC Card will be issued once all your documents are verified.

Student Reviews

Can i start the practical component of working at heights after completing this refresher course.

While our online course equips you with the theoretical knowledge of working at heights, it doesn't offer practical training. We strongly advise that you undertake an in-person training session with a trainer accredited to deliver work at heights training before carrying out any work at heights.

Are there any specific system requirements for participating in this online course?

You will need a computer, tablet, or smartphone with internet access to take part in this course. The course is designed to be compatible with most web browsers.

Is this a nationally recognised course?

No, this is not a nationally recognised course. It serves as a refresher and a way to verify your existing competency in working at heights. We recommend refreshing your knowledge every two years.

How is this course delivered?

The course is delivered online, allowing you the freedom to study at your own pace and convenience. However, this course covers the theoretical component of working at heights, and you should complete in-person practical training separately for full accreditation.

I have lost my previous Statement of Attainment. Can I still take this refresher course?

Unfortunately, proof of previous attainment in RIIWHS204D, RIIWHS204E, or RIIOHS204A, Work Safely at Heights, is necessary for enrolling in this refresher course. If you cannot provide this proof, we recommend attending our 1-day course to refresh your Working at Heights training.

What if I fail the assessments? Can I retake them?

Yes, you can retake the assessments if you don't achieve an 80% pass mark on your first attempt. Our aim is to ensure you fully understand the content and feel confident in your ability to work safely at heights.

I have completed a similar course with another provider. Can I take this as a refresher?

This course is designed as a refresher for those who have completed RIIWHS204D, RIIWHS204E, or RIIOHS204A, Work Safely at Heights. If you have completed a similar course and can provide a Statement of Attainment, you may be eligible. However, we recommend checking the course equivalency first.

What if I start the course and realise it's not right for me?

It's important to us that our learners find the course content relevant and helpful. If you start the course and feel it's not right for you, please get in touch with us immediately to discuss your options.

I work in a job where I occasionally have to work at heights, but it's not my primary role. Do I still need this refresher course?

If you're required to work at heights in any capacity, it's important to maintain updated knowledge and skills. Even if it's not your primary role, the safety practices and principles you'll learn in this course will be essential to maintaining your safety.

I completed my initial working at heights training overseas. Can I still take this Australian refresher course?

It depends on the compatibility of the training you received with Australian standards. We recommend contacting us directly with the details of your previous training so we can evaluate its suitability for our refresher course requirements.

Contact Us!

Contact form.

Are you from a large organisation? Contact us for a group quote!

• Choosing a selection results in a full page refresh.
• Opens in a new window.

•  Brisbane • Mackay

Workplace Training Provider

Riiwhs204e – work safely at heights – online refresher, riiwhs204e – work safely at heights online refresher.

Our Work safely at heights online refresher training is designed to demonstrate that participants have the pre-existing skills and knowledge to work safely at heights. This is done using 100% online theory refresher training methods.

This training is appropriate for those required to work at heights as part of their role. The refresher training is delivered 100% online.

Sheer Workplace Training is responsible for the quality of the training and assessment and will be issuing the statement of attainment for this unit through RTO number 45597.

Pre-requisite and entry requirements work safely at heights training refresher

USI – Unique Student Identifier – if you do not know yours, you can look it up at ** www.usi.gov.au **

A clear scanned copy of your current drivers licence (both sides)

A copy of your current Statement of Attainment for RIIWHS204D OR RIIWHS204E – WORK SAFELY AT HEIGHTS dated after 2015. We will not accept Statements of Attainment dated prior to 2015 or wallet cards

If you do not have access to your Statement of Attainment , you can log into your USI student portal and download a VET Transcript – www.usi.gov.au

please note all Transcripts must have a QR verification code. If you provide one without it, this will slow down the process and may result in your Statement of Attainment being issued outside the 1-3 day window.

For instructions on how to download your Transcript with the QR code, visit www.usi.gov.au or call us on 07 5593 8268

Please Note:

Statement of attainment processing time is 1-3 business days

However, participants will need to demonstrate sufficient English language, literacy, numeracy and visual interpretation skills.

Participants must be at least 17 years of age at the commencement of this course.

Physical requirements

If you have any questions or concerns regarding the entry requirements, please call  07 3901 0804 .

Course fees

Course fees are payable upon enrolment.

Course fees will be communicated to you prior to confirmation of enrollment and clearly on our website.

You may be eligible for funding to assist with the fees for this course. Funding such as  Jetco   and  BERT   may be accessible. Please contact our administration team to discuss eligibility.  More info

Work safely at heights Brisbane is suitable for people in:

Civil construction

Construction

Coal and metalliferous mining

Extractive Industries

Manufacture industries

Transport and Logistics

Emergency Rescue Team members (ERT)

Rescue officers

Public who require competency to perform a specific role

Unique Student Identifier (USI)

Completing any vocational education course in Australia is a requirement for you to obtain and supply a USI. This is obtainable from  usi.gov.au . If a USI is not supplied and verified with usi.gov.au , a certificate cannot be issued to you.

Manuals and forms:

• Copy of WHS Regulation
• Copy of the Code of Practice (library resources only)
• Copy of the Australian Standard AS 1891.1,2,3 and 4 – (library resource only)
• Risk assessment form

Leaner Guide

Work safely at heights assessment

Theory assessment you will be assessed on:

As a refresher, the individual who completed this course already holds a Statement of Attainment for RIIWHS204D Work safely at heights. This does not have an expiry date, however (Work at Heights Association) and industry standards recommend retraining every two years.

Refresher training is advised every two years due to changes in Australian Standards & Industry Standards. Changes in WHS legislation, Regulations and Codes of Practice are an important factor for individuals to ensure they remain current.

This assessment is an online refresher course involving a series of quizzes with a set of questions. You will have 30 days from the date of your registration in the course to complete the refresher.

We DO NOT accept wallet cards or Statements of Attainment dated prior to 2015. Refreshers are recommended to be undertaken at least every 2 years.

Online – nationwide 24/7

ENQUIRY FORM

Call us on 07 3901 0804 or fill out the form below for further information.

• Name * First
• Choose a Service * Choose a Service Yellow Card Boom Licence Work Safely at Heights Licence Conducting Telescopic Materials Licence Forklift Licence Enter and Work in Confined Space Licence Verification of Competency Licence
• Request a Trainer at Your Workplace?
• Name This field is for validation purposes and should be left unchanged.

Disclaimer: All information is kept secure and will not be shared or sold to any third party.

GWO Working at Heights Refresher (WAHR)

GWO Refresher training to review and build on the skills and knowledge previously learned.

Includes registration on GWO WINDA database.

15% off equipment online for training participants

For client site bookings, group bookings or to request an alternative date, please contact us

Related Products

Related courses, related industries.

• Description

Course Details

GWO Working at Heights Refresher training course to review and build on previously gained knowledge and skills. On completion of the course, participants can act independently and safely when using basic personal protective equipment, working at heights and performing comprehensive basic rescue from heights in a remote wind turbine environment.

The training course is part of the GWO Basic Safety Training Refresher (BSTR) standard.

Available in our Aberdeen, Kendal and Leeds Height Safety Centres. Can be arranged to order at our London training centres on request – please call for details.

After successfully completing the Working at Heights Refresher training course, participants will have refreshed skills and knowledge and be able to:

• Demonstrate knowledge of hazards and risks associated with working at height specific to a wind turbine generator (WTG).
• Demonstrate understanding of current national and regional legislation regarding working at height.
• Demonstrate correct identification of PPE, including identification of European/Global standard markings e.g. harness, helmet, lanyards etc.
• Demonstrate the knowledge and skills required to correctly perform pre-use inspection, service, store and correctly fit relevant PPE e.g. harness, fall arrest lanyards, guided type fall arresters and work positioning lanyards.
• Demonstrate the correct use of the relevant PPE e.g. harness, fall arrest lanyards, guided type fall arresters and work positioning lanyards. This includes correct identification of anchor points and the correct conduct on ladders.
• Demonstrate correct use of evacuation devices.
• Demonstrate how to approach rescue situations in WTG’s and use rescue equipment efficiently.

The BSTR Working at Heights Refresher training course includes:

• Introduction to the training
• Knowledge review
• PPE review exercises
• Measures to prevent injury during training
• Individual practical review exercises
• Practical exercises – group
• Training review

Also available: GWO Working at Heights with Manual Handling Refresher (WAHR) combined 2 day course

To attend the GWO Working at Heights Refresher training course, participants must hold a valid in-date certificate for the following GWO Basic Safety Training (BST) Standard courses:

• GWO Working at Height (WAH) 

Training certificates are issued online via GWO’s WINDA system. Certificate valid for 2 years. Training should be renewed before the end of the given validity period. A certificate can be renewed up to two months prior to expiry and maintain the original certification date.

GWO Participants ESSENTIAL – PLEASE NOTE:

• Safety footwear is required for all practical sessions.
• Participants must provide a WINDA ID number at time of booking. Failure to do so will delay GWO certification. Please refer to globalwindsafety.org/register .
• GWO participants are required to bring a government issued ID (passport or driving license) which will be checked at registration on their course.

It is the participants/bookers responsibility to ensure that all relevant pre-requisites are met to attend this course and that the evidence is provided on the first day of the course e.g. in-date certificates for revalidation courses.

Failure to meet any of these pre-requisites may result in the participant being asked to leave the course. No refund will be given in this event.

15% discount – on completion of your WTG training course you will receive voucher code giving you 15% off your next heightec equipment order online.

i-Scape Personal Escape System with ProSeal

RescuePack ROTOR WTG Rescue System in Aluminium Case with ProSeal

NEW HELIX Climbers Harness – For Both Men and Women

Work at Height First Aid Pack

GWO Basic Safety Training Refresher – Onshore Package

Refreshes skills learnt in the GWO Onshore Basic Training Standard…

GWO Basic Safety Training Refresher (BSTR) – Offshore Package

Renew your certificates with the GWO Basic Safety Training Refresher…

GWO Slinger Signaller (SLS)

Enables participants to conduct slinging techniques and signaller during simple…

GWO Enhanced First Aid (EFA)

GWO Enhanced First Aid training course gives participants the required…

GWO Working at Heights with Manual Handling Refresher (WAH & MH)

GWO Refresher training to review and build on the skills…

GWO Sea Survival (SS)

GWO accredited training course giving participants the skills and knowledge…

The renewable wind industry has seen a massive growth in…

Rope Access

Rope Access is the most versatile of new access methods….

WORKING AT HEIGHTS REFRESHER TRAINING

This course is applicable for workers who have been previously certified by a CPO approved training provider.

Participants enrolling in the WAH Refresher program must provide proof of completion of prior Working at Heights training. A refresher record of training will not be issued to a learner who has not previously completed a CPO approved training program.

Refresher training is mandatory every 3 yrs. for workers to maintain certification validity.

Training Content:

• Guardrails

• Protective Covers

• Barriers and Bump lines

• Personal fall protection equipment (travel restraint, fall restricting, fall arrest systems)

• Anchor points

• Work positioning systems, work access and platforms

• Fall calculations

• Fall Protection Inspections

• Rescue planning

• Knowledge Check and Hands-on Practical Evaluation

330 Laurier Blvd. Ontario K6V 7L9 +1 613 345 1991

25 Railway St. Ontario K7K 2L7 +1 613 546 6663

You are using an outdated browser. Please upgrade your browser or activate Google Chrome Frame to improve your experience.

• Work with us
• FMTC M&A Lafayette
• FMTC M&A New Iberia
• FMTC M&A Gray (Houma)
• FMTC HQ / Lutkemeerweg
• FMTC Schiphol
• FMTC Dordrecht
• FMTC IJmuiden
• FMTC Lage Zwaluwe
• FMTC Dunkirk
• FMTC Zeebrugge
• FMTC Ras Tanura

Daily reachable between 7:00 - 18:00 (GMT-6h)

• Industry US
• OSHA E-learning
• GWO Refresher
• GWO advanced courses
• GWO Combined Courses
• GWO E-Learning Basic
• GWO E-Learning Refreshers
• OPITO Courses
• Other Offshore
• NOGEPA Courses
• NOGEPA Combination
• STCW courses
• STCW Combination
• OPITO E-learning

Homepage » Courses » GWO Working at Height Refresher

Online GWO Working at Height Recyclage

Save time and go for the online GWO Working at Height Refresher

GWO Working at Height Refresher

The training GWO Working at Height Refresher is the refresher course of the GWO Working at Height . Every 2 years, this refresher course of GWO Working at Height needs to be completed. During this GWO Working at heights Refresher, all risks regarding working at height will be discussed and skills will be learned which can be beneficial in order to work in a safe way. After completing the Working at Height refresher, the delegate will be able to keep him/herself and his/her colleague’s safe in perilous situations in wind turbines.

• Timetable: 1 day(s)
• Certification: GWO Module Working At Heights
• Validation: 2 years
• Requirements: A valid GWO Working at Heights certificate

More about GWO Working at Height Refresher

The GWO Working at Height Refresher has a theoretical and practical part. By participating in this training, the delegate contributes to a safer working environment for the entire wind industry. The training is for every person with a valid GWO Working at Height certificate.

There is also a GWO Basic Safety Refresher that combines the training GWO Working at Height Refresher with GWO Sea Survival refresher , GWO First Aid refresher , GWO Fire Awareness Refresher and GWO Manual Handling Refresher .

Course Content:

• Legislation around working at heights
• Methods of protection during a fall
• Safe working systems and how to easily apply these
• The dangers of working at heights
• The use of evacuation equipment
• Checking protective equipment (PPE) the right way such as armor, helmet and rope
• Skills to save a colleague out of a threatening situation from a wind turbine
• Provide medical assistance on the ground floor

Use the “Book” button below to go to our booking form to book the course. In case of questions, you can call us on +1 (985) 217 9284  or contact us via our contact form .

Certified OPITO , NOGEPA , GWO and STCW training courses

Unique locations at the most convenient places around the world

Training when it suits you

Flexibility is paramount

Our training courses are never cancelled

All other GWO Refresher Training

Gwo sea survival refresher, gwo manual handling refresher, gwo fire awareness refresher, gwo first aid refresher, gwo advanced rescue training refresher (art-r), gwo basic safety training refresher (onshore), gwo basic safety training refresher (offshore).

RIIWHS204E – Work safely at heights

Introduction.

**  Non Accredited Certificate of Completion Online Refresher **

Our online refresher process is designed for workers who want to refresh a unit of competency (tickets) via a blended pathway of practical evidence and an online assessment saving the need to sit in a class for a whole day.

Working at heights training is required by anyone who will either be working at a heights or around objects that could fall from heights. There is no minimum height required for a job to be classed as working at heights. This course covers all aspects of working at heights whether it be climbing a ladder, working from a platform, to working on a roof. This course will look at different aspects of working at heights to consider when completing a task such as structures you are working on, the ground level and if it is stable, weather conditions and how this impacts how the tasks will be completed, and lighting conditions if they are suitable. This course will cover the following aspects:

To be eligible to complete your refreshers through this pathway you will need to meet all of the following steps:

Step 1: Complete enrolment form

Step 2: Employer verification letter

Step 4: Supply your VET Transcript – a record of your training

Step 5 : Payment is required in full prior to being enrolled

If you can meet the above criteria then please follow the link below to access the correct information and documentation to begin your enrolment process.

  URL:  https://moodle.waskills.com.au/course/view.php?id=466 Username:  online.refresher Password:  online

  If you are not able to meet all of the above criteria you will need to enrol into a face-to-face refresher course at one of our training centres. 

•  Once you have been enrolled your online theory assessment will be valid for completion within 30 days
• Your assessment will take between 30-90 minutes depending on your skill and knowledge level

Once all pre-enrolment evidence is received and you have met all correct criteria you will be sent your login details for completion of your theory assessment.

It is highly recommended that you study before attempting the online assessment. There will be a manual available for download in your online course for you to study before you complete your online assessment/s.

NOTE: You will need to achieve a passing grade of 100%  in order to pass these assessments.  You will be given two (2) attempts at each question. Any grade of 90% or more  will qualify you for a verbal re-assessment of any questions that you get wrong. In this event,  please call to discuss any questions that you may have missed.

Express processing  is available for an additional $25. Certificate of Completion will be issued within one business day of your completion of the online assessment.

Same day processing  is available for an additional $50. Certificate of Completion will be issued on the same business day you complete the online assessment – provided the assessment is completed by 3.00pm.

Upon successful completion of this course you will be issued with a Certificate of Completion in accordance with our Issuance Policy and Procedure

Payment is required in full before login details can be issued. Payment can be made by credit card in person or over the phone, or via bank transfer.

Please ensure you read the  Terms and Conditions  (Student) or  Terms and Conditions  (Client)  (includes the  refund and cancellation policy )

• The cost of each refresher includes a  non refundable administration fee of $45 per unit .
• Cancellations made before actual enrolment will be entitled to refund minus $45 administration fee.
• Cancellations made after enrolment will not be refunded.

For more information please to  CLICK HERE  download the Student Handbook.

• Associated Links
• Français
• Personnel Services

• Our Facilities
• Our Esteemed Clients
• Partners & Associations
• Courses & Schedule
• On-Line Courses

..Working at Heights- REFRESHER Course

Course details & objectives.

References:

Working at Heights Refresher has been designed to reinforce key learning outcomes of the participants’ original Working at Heights training and ensure that participants are able to demonstrate their continued knowledge of the correct use of fall protection equipment.

The MLITSD'S CPO Approved requires workers to complete an approved half-day Working at Heights refresher training course after three years under the O. Reg. 297/13: Occupational Health and Safety Awareness and Training. https://www.ontario.ca/laws/regulation/130297               

Who needs this training?

Any worker who had previously successfully completed an approved Working at Heights training program

Students must present their Learners ID# on their Ministry of Labour issued Working at Heights card at the time of the training.

If you have lost your Ministry of Labour Working at Heights card please contact 1-877-202-0008

If you haven’t completed the Working at Heights training through an approved training provider, then the Working at Heights Refresher course is not the correct course for you. Please see the Working at Heights Fundamentals of Fall Prevention schedule.

Course Requirements:

1. A copy of the MLITSD'S certificate or acpo approved training provider Working at Heights certificate must be provided with registration. 

2. Legal Photo ID must be provided upon arrival (Driver’s license, Health card, Passport, Student card etc.)

Course Outline:

Working at heights refresher training is the practical module of the Working at Heights training program (section 9.2 of the  Working at Heights Training Program Standard ). The minimum duration of the refresher training is (3.5) hours of training delivery

The Practical module covers the following topics;

1.            Barriers and safety nets;

2.            Personal fall protection equipment;

3.            Anchor points;

4.            Work positioning systems, work access and platforms; and

5.            Rescue planning.

In addition, it includes a hands-on demonstration of equipment and procedures, and a written test.

Duration: 3 1/2 hours

Language options: English and French

TO REGISTER / POUR VOUS INSCRIRE

..Working at Heights- REFRESHER Course |

1) CALL / APPELEZ 613-741-1128

2) Complete the following form and our team will send you a registration form / Remplir le formulaire suivant et notre équipe vous enverras un formulaire d'inscription

Comapny legal name / Nom légal de la companie *  

First name / Prénom *  

Phone number / Numéro téléphone *

Surname / Nom de famille *  

Email / Courriel *  

Amount of people / Nombre de personne ?   1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

SEND EMAIL/ENVOYEZ COURRIEL

• 1370 Triole Ottawa, Ontario K1B 3M4 TEL.: (613)741-1128 FAX.: (613)741-1130
• In the News

Course Categories

• All Equipment

Information on

• Roof Access
• Installations
• Certification of Systems
• Inspection & Maintenance
• Compliance Audits
• Inertia Reel Inspections
• Personal Protective Equipment
• All Locations
• All Resources

Payment Options

Refund And Cancellation

Policies & Procedures

Unique Student Identifier

About Saferight Training Academy

• Key Pillars
• Sectors we Provide
• Client Testimonials

Learning Categories

Work safely at heights - refresher, refresher course - riiwhs204e, delivery mode.

• Face-to-Face

Available Intakes

Work safely at heights - refresher overview.

Participants must hold a current Statement of Attainment for the relevant courses within the last two (2) years prior to attending any refresher courses.

The RIIWHS204E – Work Safely at Heights refresher course is aimed at those who have previously undertaken the complete Work Safely at Heights training course and need to refresh their knowledge and skills.

Participants will review:

• Legislative requirements
• Risks associated with working at height
• Priority of access
• Forces in falls
• Physical controls
• Fall arrest equipment
• Types of anchors
• Rescue procedures

Accredited Units

You will be enrolled into the following unit of competency:

• RIIWHS204E – Work Safely at Heights .

Entry Requirements

• Following industry standards, participants must hold a current Statement of Attainment for Work Safely at Heights – RIIWHS204E or equivalent issued within the last two (2) years prior to attending this course
• Ability to read, write and understand English
• Present photo I.D. on arrival
• Complete a ‘Fitness to Complete Training’ form upon arrival at the training facility. The student is required to declare any medical issue that may exclude them from full participation
• Wear normal work clothing, enclosed footwear and remove all jewellery prior to commencement
• Theory Component
• Practical Component

Certification

On successful completion of this course, students will receive a:

• Nationally Recognised Statement of Attainment for   RIIWHS204E – Work Safely at Heights .

Your Statement of Attainment does not have an expiry date, however, Working at Heights Association  (WAHA)  and industry standards recommend retraining every two years.

The  Unique Student Identifier (USI)  must be supplied and verified prior to issuance.

• Students will be provided with morning tea and refreshments for all courses run at Saferight.
• Saferight has kitchen facilities for people who wish to bring their own lunch or alternatively, there are cafes and lunch bars within close proximity.

Refund and Cancellation Policy

Please refer to our  Refund/Cancellation Policy

1/2 Day (7.30AM-11.30AM)

Delivery Locations

Our Work Safely at Heights Refresher course is delivered at the following location:

Refer to the price listed in the enrolment table.

Group bookings/Onsite training is available at your site or ours. Please click the ‘Enquire Now’ button for further information on pricing and site requirements.

Share This Course

Student handbook, health declaration form, language, literacy and numeracy test (lln), related courses.

• Refreshers/ Reassessments

Have some questions?

If you have any questions related to the Work Safely at Heights – Refresher please click the enquiry form button

You have no items in your shopping cart.

• Get Involved

• Trainings & Certifications
• Small Business Centre
• Agriculture & Horticulture Safety Centre
• The Business Case for Safety
• Workplace Hazards
• Health & Safety Topics
• Sector-Specific Health & Safety
• Resource Hub
• Understanding the Legislation
• Developing a H&S Policy & Program
• Investigating Complaints
• Inspections & Investigations
• Frequently Asked Questions
• JHSC Certification
• Safety Connections
• COVID-19 in the Workplace
• Federally Regulated Workplaces
• Workplace Mental Health
• More Categories
• Email Subscription Centre
• Announcements
• Sign Up For Email Newsletter
• Course Cancellations

How We Help

• WSIB Health & Safety Excellence program
• Awareness Sessions

Health & Safety: Resources & Tools

Your roles & responsibilities, training & events.

• Events & PIP Conferences
• Free Safety Connections

News & Updates

Working at heights: an introduction.

Share this post

Updated!  Learn to assess and control hazards related to working at heights.

Duration: 1 hour

Price per person: $49.00.

This e-course features an improved look and functionality to enrich your learning experience.

This introductory course on its own may not meet training requirements for working at heights in all jurisdictions. It should be supplemented by further instruction and hands-on training that is specific to the jurisdiction, job, work site and equipment.

Working at heights is a common activity, but it can pose serious hazards. Failing to manage risks associated with working at heights can result in severe injuries or fatalities. A proactive and preventive approach will help protect workers. Whether working on ladders, scaffolds, or lifts, working safely is critical. Learn to assess and control hazards related to working at heights and implement preventative measures including fall prevention and fall protection techniques.

This course does not cover falls from the same level. Please refer to our  Preventing Falls from Slips and Trips course .

What topics will be covered?

• Assessing hazards and safe working practices
• Fall prevention techniques
• Minimizing fall injuries with fall protection measures
• Emergency preparedness
• Safe use of ladders, scaffolds, lifts and platforms

What are the benefits?

Upon completion of the course you will know how to:

• Identify common hazards related to work at heights
• Describe the preferred order (hierarchy) of preventive measures for work at heights
• Use safe work practices for preventing falls
• Understand common methods of minimizing injury should a fall occur
• Take action to prepare for emergencies related to work at heights

Who is this recommended for?

This course is recommended for employers, managers, and supervisors, including those who manage contractors. Workers and contractors who perform work at heights, as well as health and safety committee members, will also benefit from taking this course.

How can training be delivered?

This course is delivered as an on-line e-learning course. All you need is a computer, access to the Internet - and you are ready to go! This e-learning course is designed to help you learn at your own pace and in your own environment at your own convenience.

Content for this course was developed by the Canadian Centre for Occupational Health and Safety (CCOHS), and reviewed by labour, employer and government representatives to ensure a balanced perspective.

Also available in French.

Group Discounts

The cost is based on the total number of seats purchased. Multi-seat pricing is based on the single user seat price with the following volume discounts applied:

This course is also available in French

Item Number: EHEIGHT-P4357EN

Content for this course was developed by the Canadian Centre for Occupational Health and Safety (CCOHS), and reviewed by labour, employer and government representatives to ensure a balanced perspective. ©Canadian Centre for Occupational Health and Safety. All rights Reserved. E-Course description and content provided by CCOHS under license with WSPS. Unauthorized reproduction and distribution strictly prohibited.

• ASI Partners
• Customer Success
• Working At Heights Full
• Working At Heights Refresher
• (WAH) Fall Protection
• Confined Space Entry
• Confined Space Rescue
• Confined Space Awareness
• Power Elevated Working Platforms
• Power Elevated Working Platforms Refresher
• Forklift Training
• Forklift Refresher
• Emergency First Aid and CPR
• Standard First Aid and CPR C
• First Aid Standard and CPR C (Blended)
• First Aid Standard and CPR C Refresher
• First Aid Emergency (Blended)
• Joint Health And Safety Part 1
• Joint Health And Safety Part 2
• Joint Health And Safety Refresher
• View All In-Class Courses
• Joint Health And Safety Committee Refresher
• WHMIS For Healthcare
• Fall Protection Training
• Fork Lift / Lift Truck
• Motorcycle Safety
• Transportation of Dangerous Goods
• Confined Space Training
• Aerial Lift
• View All Online Courses

Your training hub to create & distribute courses & get notified when employees require training.

When you have a big enough group we can facilitate a private course.

• COR Certification
• Investigations
• Program Development and Consulting
• Site Inspections
• Fire Safety
• Ergonomic Assessment
• Ergonomic Checklists
• NMSO Ergonomic Assessments
• Occupational Health & Assessment Centre
• Environmental Training
• Environmental Testing
• Environmental Sessions
• Environmental Sampling
• Environmental
• Air Quality Testing
• GET IN TOUCH

Working At Heights Full Course

Register Now

Working Safely At Heights

The Working at Heights Full Course is available for either first time workers or experienced workers who are looking to receive a full refresher course for safely working at heights. This course offers an in-depth education on how to prevent serious injuries and/or fatalities in the workplace. The program covers various fall arrest systems and fall protection. This in-class program is both engaging and informative.

After completing the course, all participants should be able to recognize potential fall hazards, apply the necessary fall prevention and protection measures, understand how to work at heights safely and in compliance with regulatory requirements and have a full knowledge of their rights and responsibilities as workers.

Reach New Heights Safely With Auspice Safety

Don’t leave safety to chance. Enroll in a Working At Heights course and equip yourself with the skills you need to work safely at elevated levels. Your safety matters register now!

Working At Heights Course Benefits

Taking the working at heights course helps to create a safe working environment for all employees. Knowing what to do when working at heights allows workers to protect themselves and others from potential risks. There is nothing bad that can come from taking extra precautions and learning about safety in the workplace, especially when that work is not on the ground.

When working at heights, there are serious risks involved, but most dangers can be avoided with proper safety training and knowledge. Learn how to assess risks and prevent injuries while working at heights. Auspice Safety Inc’s Working at Heights course is dedicated to helping keep workers safe and informed about their responsibilities and rights as workers.

Frequently Asked Questions

1. how long is working from heights training valid for what happens if my certification expires, 2. who needs to take working from heights training.

• Safety belts
• Safety nets
• Fall arrest systems
• Fall restricting systems
• Travel restraining system

3. Does working from heights training have to come from a certified training partner?

4. how can i check that a worker’s working from heights training is valid.

• A proof of completion record issued by the Chief Prevention Officer or Chief Prevention Office-=approved training partner.
• Using SkillsPass™ to access a worker’s training information with their consent.
• Contacting the Ministry of Labour

5. Who is responsible for ensuring that workers have valid working from heights training?

LOGIN CREATE ACCOUNT

• Onsite Training
• Online Training
• Train the Trainer

WORKING AT HEIGHTS TRAINING & REFRESHER COURSES

The Working at Heights Training and Working at Heights Refresher Courses are both approved by the Chief Prevention Officer (CPO) of Ontario . These courses are taught by our certified trainers and we offer short notice training or weekend sessions if required. All employers who have employees that work at height must have their workers successfully complete the full CPO approved Working at Heights Training program. The full course is valid for a period of 3 years from date of successful completion. To avoid this certification from expiring the Working at Heights Refresher Course will need to be completed.

If you have lost your WAH card or have any questions regarding your WAH certification, please call the Ontario Ministry of Labour, Immigration, Training and Skills Development at 1.877.202.0008 or by email at: [email protected]

Request More Info Pricing

Note – we do not provide public sessions for individuals

Description

Working at Heights Training and Working at Heights Refresher Courses

Our full Working at Heights Training course and the Working at Heights Training ‘Refresher’ Course are both approved by the Chief Prevention Officer (CPO) of Ontario.

Working at Heights Training and Working at Heights Refresher Courses are designed to:

• Promote a strong workplace safety culture by identifying the importance of safe working at height principles.
• Teach all workers who work at heights, the proper theory and practical protection training to help keep them safe in their workplaces.
• Demonstrate all related fall protection equipment available and proper donning and doffing techniques.
• Educate on the various dangers of working at height and how to prevent accidents.

Working at Heights – Full Course Outline:

• Rights and responsibilities
• General hazard recognition
• Hierarchy of controls
• Procedures for warning methods and physical barriers
• Procedures for safety equipment
• Personal protective equipment (PPE)
• Barrier and safety nets
• Anchor points
• Work positioning systems, work access equipment and platforms
• Rescue and planning

Working at Heights – Refresher Course Outline:

• Barriers, guardrails and safety nets
• Personal fall protection equipment
• Practical demonstration and fall distance calculations
• Rescue planning

Employers must ensure that certain workers complete the courses that have been approved by the Chief Prevention Officer ( CPO ) and delivered by an approved training provider such as Safety First Training before they can work at heights.

The training requirement is for workers on construction projects who use any of the following methods of fall protection: travel restraint systems, fall restricting systems, fall arrest systems, safety nets and work belts or safety belts.

This training requirement is in the Occupational Health and Safety Awareness and Training Regulation , and is in addition to training requirements under the Construction Regulation.

Working at heights can be dangerous and poses a significant risk to workers’ safety. That’s why the Ontario Ministry of Labour, Immigration, Training and Skills Development requires workers who work at heights to receive Working at Heights Training.

The Working at Heights Training program is designed to educate workers on the hazards associated with working at heights and provide them with the skills and knowledge they need to work safely in elevated environments. The training covers topics such as:

• Proper use of fall protection systems: Workers are taught how to correctly use equipment such as safety harnesses, lifelines, and anchorage points to protect themselves from falls.
• Risk assessment: Workers learn how to identify and assess hazards associated with working at heights, such as uneven surfaces, slippery conditions, and unprotected edges.
• Safety procedures: Workers are trained on safe work practices, such as maintaining three points of contact, properly securing tools and equipment, and following established safety protocols.
• Emergency procedures: Workers are taught how to respond in the event of an emergency, such as a fall or other accident.

The importance of Working at Heights Training cannot be overstated. Falls from heights are a leading cause of workplace injuries and fatalities in Ontario, and many of these incidents are preventable with proper training and equipment. By providing workers with the knowledge and skills they need to work safely at heights, employers can help prevent injuries and save lives.

Working at heights training is a legal requirement in Ontario. Employers who fail to provide their workers with proper training can face fines and other penalties. By ensuring that their workers receive adequate training, employers can avoid legal liabilities and protect their reputation.

Working at Heights Training is essential for workers who work at heights in Ontario. It not only helps prevent workplace injuries and fatalities but also ensures compliance with legal requirements and protects employers from legal liabilities.

Assessment:

Completion:.

Contact Us Today to Set Up Your Working At Heights Training!

• Select How many are in your group? 4-5 6-10 11+

Related products

RESPIRATOR MASK FIT TESTING & TRAIN THE TRAINER

FIRE SAFETY IN THE WORKPLACE

You are using an outdated browser. Please upgrade your browser to improve your experience.

Height Safety

Refresher - working at heights.

About this course

Available dates, course details, related courses.

Refresher - Working Safely at Heights Training

Working Safely at Heights is the training accreditation suitable for people who are required to undertake work at heights.

WorkSafe Connect has been delivering workplace health and safety related working at heights programs for over 15 years and is one of Queensland’s leading suppliers of the working at heights skill set.

This 4-hour refresher course has been designed to update competent and experienced students with the latest skills and knowledge required to work at heights. The course takes students through the process that will provide valuable knowledge regarding safety practices when working at heights.

The program is made up of the following nationally accredited unit of competency:

• RIIWHS204E Work Safely at Heights

Townsville Training

Bayswater Road, Garbutt, Townsville, QLD 4814

7:30am – 11:30am 22nd May 2024

12:30pm – 4:30pm 29th May 2024

12:30pm – 4:30pm 21st June 2024

12:30pm – 4:30pm 4th July 2024

12:30pm – 4:30pm 15th July 2024

12:30pm – 4:30pm 31st July 2024

12:30pm – 4:30pm 14th August 2024

12:30pm – 4:30pm 28th August 2024

12:30pm – 4:30pm 13th September 2024

12:30pm – 4:30pm 27th September 2024

Need another date? Contact the Worksafe Connect Team

Reviews and testimonials

Calm delivery, pragmatic detailed delivery, good knowledge transfer, practical real life examples. – Patrick D, Townsville

The theory is great but the hands on process is especially important to myself. To do it really helped me understand. Thank you. – Russell B, Townsville

Practical component was good with a variety of equipment used. – Matthew I, Townsville

Trainer had good knowledge of course content and paced training to suit students requirements. – Patrick L, Townsville

Course Overview

Our working at heights training course will run the participants through areas including:

• Applicable legislation
• Associated Australian Standards
• Risk assessment and application of the hierarchy of control measures
• Types, inspection and selection of safety equipment
• Rescue plans
• Methods of moving tools and equipment
• Anchor systems and understanding compliance
• Fall restraint systems, selection and inspection of equipment and correct use
• Work positioning systems, selection of equipment and correct use
• Fall arrest systems including energy absorbing lanyards
• Accessing the height

The skills and knowledge that you obtain during the Work Safely at Heights Training is suitable for working at heights across a wide range of industries including the Resources, Quarrying, Drilling, Agriculture, Councils/Government, Defence, Manufacturing, Heavy Industry and Construction industries.

Course Delivery

Training will be conducted by experienced trainer assessors who have industry currency, strong knowledge of relevant legislation, regulations and industry standards.

Practical and theoretical activities drive the training experience to ensure that the training is engaging, interesting and relevant.

WorkSafe Connect offers this course in the following formats:

• Face to Face – Public Courses (Brisbane and Townsville)
• Face to Face – Onsite (at your site / workplace)

WorkSafe Connect recognises that whilst there is a standard set of learning outcomes for this course, the context and environment in which the learning is applied is varied.

If you would like to discuss delivery options in more detail, then please get in contact with us and we would be more than happy to discuss your requirements and options in more detail.

Accreditation

To complete the course, students must successfully complete all assessments which are aligned with the national unit of competency.

All assessments are completed during the course – no assessment activities need to be completed prior to or post the training course.

Upon successful completion of the course requirements, students will receive a nationally recognised Statement of Attainment for the following unit of competency:

While there is no legislated requirement associated with the refreshing of this competency, industry suggests that best practice is to refresh this competency once every 2-3 years.

If you have any questions regarding what Working Safely at Heights course is most suitable for you then please get in touch with a member of the WorkSafe Connect team today.

Frequently Asked Questions

What does working at heights training cover.

Whether you work at height as part of your job or supervise those who do, Working at Height Training ensures that you have valuable knowledge regarding the safety practices of working at heights.

Work at heights training is focused on fall prevention and fall arrest. It is designed to equip workers with the knowledge and skills to safely work in any height situation, primarily being aimed at general construction, maintenance, mining, large factories or other work situations where work is conducted where there is a risk of a fall.

Key areas covered as part of our course include:

• Identify work requirements
• Identify work procedures and instructions
• Access and install equipment
• Perform work at heights
• Clean up work area

How often does working at heights need to be refreshed?

This is a nationally recognised unit of competency and therefore your accreditation does not technically expire.

While there is no legislated requirement set out for the refreshing of this competency, industry best practice suggests that this competency should be refreshed once every 2-3 years.

We consistently work with clients who require refreshing of this competency at least every 2 years.

WorkSafe Connect offers a 4-hour refresher course for participants who have previously had training and have currency in relation to working safely at heights.

Are there any specific legislative requirements connected to working at heights in Queensland?

The Work Health and Safety Regulation 2011 (the WHS Regulation) sets out the specific control measures that are required where there is a risk of a fall.

The below link provides guidance on managing the risks associated with confined spaces.

https://www.worksafe.qld.gov.au/safety-and-prevention/hazards/workplace-hazards/construction/work-at-heights

• WORKING AT HEIGHTS
• WORKING AT HEIGHTS REFRESHER
• LIFT TRUCK SAFETY
• ELEVATED WORK PLATFORM
• TRAINING PROGRAMS

COURSE CALENDAR

• ONLINE TRAINING
• HEALTH AND SAFETY EXCELLENCE PROGRAM
• ON SITE SAFETY REPRESENTATION
• HEALTH AND SAFETY MANUALS
• WORKPLACE VIOLENCE & HARASSMENT INVESTIGATION & SUPPORT

VIEW CLASSROOM SCHEDULE

• Barriers and Safety Nets
• Personal Fall Protection Equipment
• Anchor Points
• Work Access and Platforms
• Rescue Planning

• 1300 990 810
• Student Login
• QLD Brisbane Gold Coast SE QLD Central QLD
• NSW Greater Sydney Western Suburbs Eastern Suburbs
• VIC Greater Melbourne Inner Melbourne South East

No region selected

• Working at Heights - Online Theory + Half Day Practical

Face to Face

Equips workers with the knowledge and skills to safely work at height in various situations. Online + hands on practical.

The Construction Training Fund allows for up to a 70% discount on course costs for eligible candidates and companies.

Course Dates

Course details, certification.

Students who are deemed competent will receive a Statement of Attainment recognised under the Australian Qualifications Framework. This certification is nationally recognised. The Statement is issued by Pinnacle Safety and Training (RTO 40496).

National unit of competency

• RIIWHS204E - Work safely at heights

Course Duration

Our Working at Heights course is comprised of two components:

• $195.00 pp for public courses
• Also need Confined Space? Combine and save - pay only $329, click here to find out more
• Prefer not to study online? See our 1 day face-to-face program
• Subsidy available through CTF for eligible participants. Find out more
• For group bookings outside our public course schedule or at your location, please submit your group booking enquiry here for an obligation free quote

Course Overview

Pinnacle Safety and Training train more people to work safely at heights than any other provider in Australia.

This nationally recognised course covers theoretical and practical aspects of working at height.

During the course we will assist you to develop safe work method statements and risk assessments for working at height. All workers who conduct or supervise tasks whilst at height will find this course beneficial to workplace safety. This course will enable you to comply with current WHS legislation with successful trainees receiving a nationally recognised Statement of Attainment.

Training can be conducted at your work site or off-site at one of our purpose built training facilities. Work at heights training is focused on fall prevention rather than fall arrest. It is designed to equip workers with the knowledge and skills to safely work in any height situation, primarily being aimed at general construction, maintenance, mining, large factories or other work situations where work is conducted in a place where a fall from one level to another is possible.

Pinnacle Safety and Training recognises that whilst there is a standard set of learning outcomes for this course, the context and environment in which the learning is applied is varied. We will always customise the course to suit your unique workplace requirements. Training covers risk assessment, selection and correct use of equipment, rigging and of anchor systems, fall restraint, work positioning and fall arrest systems.

For supervisors of work at height or anyone needing to develop rescue plans , please consider undertaking Working at Heights - 2 day training. Remember: Having a tested, effective rescue plan for all work at heights where a fall is possible is the law!

Course Outline

• Regulations and legislation
• Australian Standards
• Risk assessment and hazard elimination
• Equipment selection and use
• Anchor systems, selecting solid and reliable anchorage
• Fall restraint systems, selection of equipment and correct use
• Work positioning systems, selection of equipment and correct use
• Fall arrest systems
• Using energy absorbing lanyards
• Correct use of ladders and ladder safety training

Course Inclusions

Online Learning:

• Access to our online learning platform with interactive learning module built and tested by industry experts
• Access to a dedicated Online Faculty at Pinnacle to assist you with your online learning, if you need it
• The freedom to study when you like and go at your own pace.

Hands On Practical Component:

• Practical training conducted by experienced working at heights specialist
• Half day (approx. 4 hours) of hands-on, practical training. Up to 12 trainees per course.
• Recommendations and advice for specialised PPE and equipment for your particular workplace
• Advice on risk control methods for the type of work to be undertaken
• Scenario-driven learning to ensure workers can be safe and comply with relevant standards and legislation

Each Trainee Must Provide

Participants must

• Have completed the pre-course online learning and assessments prior to attending the scheduled face-to-face training
• Be at least 15 years of age
• Have at least a Year 10 level of numeracy, literacy and communication skills
• Have the ability to read and write English
• Provide their own transport and lunch
• Arrive in suitable attire, including long pants and closed-in shoes.

Equipment requirements

• We can supply all equipment necessary for you to undertake the practical training.
• We actively encourage you to bring along your own equipment.

Online learning requirements

• Use a device that meets the minimum System Requirements of Pinnacle’s e-Learning system (we officially support and recommend modern desktop or laptop computers running Google Chrome web browser). Other personal devices (e.g. phones and tablets) may be compatible, but due to the variety available, we do not officially support these devices.
• Have a stable internet connection.
• Use a device that can play sound.
• Working at Heights - 1 day
• Working at Heights - 2 day
• Working at Heights and Confined Space Combined
• Working at Heights - Half day Refresher
• Elevating Work Platform (EWP) Under 11m
• Elevating Work Platform (EWP) Over 11m
• Rope Access Training (IRATA)
• Tower Climbing & Rescue Training
• Height Safety Equipment Inspection
• Tower Rescue Refresher
• Vertical Rescue
• Stormseal Accredited Installer
• Working at Heights Awareness

Student Links

Friendly and informative learning environment. I completed my Working at Heights course, half online and half face to face, and valued the knowledge and confidence I obtained through the Pinnacle process. Recommend to anyone needing to do a course within the industry.

Craig G. - Brisbane, QLD

WORKING AT HEIGHTS REFRESHER (ONTARIO)

Course details.

Duration: 3.5 hours Cost: $89 + HST

This refresher course provides workers with 3-year recertification in Working at Heights, approved by the Chief Prevention Officer of the MLITSD. IRESCUE TRAINING delivers this course in-house or onsite at your location! Meets the requirements of Regulation 297/13 and the Working at Heights Training Standard.

Participation Requirements:

Participants must bring a CPO-issued proof of completion card or certification card from a CPO Approved Working at Heights training provider, a piece of government-issued photo ID. CSA-approved head, foot, and eye protection required on job sites only.

100% attendance, 100% score on practical skills demonstration, and 75% min. passing grade on written knowledge evaluation. For participants with language, literacy, or accommodation needs, alternative evaluation methods to the written test may be used to verify that core concepts have been grasped. Please inform us of any special needs when registering.

Certification:

3-year recertification in Working at Heights (CPO Approved)

Course Content:

• Barriers and other fixed equipment
• Personal Fall Protection Equipment
• Anchor points
• Work positioning systems, work access and platforms
• Rescue planning
• Hands-on demonstration of specific critical tasks (100% score required)

Take-Home Materials:

Program manual, Certification card

Site-Specific Considerations:

While Working at Heights is required training on construction sites, site-specific training is also required. The employer is responsible for site-specific training related to specific hazards and types of equipment used on the job.