research design sample in thesis

• How it works

How to Write a Research Design – Guide with Examples

Published by Alaxendra Bets at August 14th, 2021 , Revised On October 3, 2023

A research design is a structure that combines different components of research. It involves the use of different data collection and data analysis techniques logically to answer the  research questions .

It would be best to make some decisions about addressing the research questions adequately before starting the research process, which is achieved with the help of the research design.

Below are the key aspects of the decision-making process:

• Data type required for research
• Research resources
• Participants required for research
• Hypothesis based upon research question(s)
• Data analysis  methodologies
• Variables (Independent, dependent, and confounding)
• The location and timescale for conducting the data
• The time period required for research

The research design provides the strategy of investigation for your project. Furthermore, it defines the parameters and criteria to compile the data to evaluate results and conclude.

Your project’s validity depends on the data collection and  interpretation techniques.  A strong research design reflects a strong  dissertation , scientific paper, or research proposal .

Step 1: Establish Priorities for Research Design

Before conducting any research study, you must address an important question: “how to create a research design.”

The research design depends on the researcher’s priorities and choices because every research has different priorities. For a complex research study involving multiple methods, you may choose to have more than one research design.

Multimethodology or multimethod research includes using more than one data collection method or research in a research study or set of related studies.

If one research design is weak in one area, then another research design can cover that weakness. For instance, a  dissertation analyzing different situations or cases will have more than one research design.

For example:

• Experimental research involves experimental investigation and laboratory experience, but it does not accurately investigate the real world.
• Quantitative research is good for the  statistical part of the project, but it may not provide an in-depth understanding of the  topic .
• Also, correlational research will not provide experimental results because it is a technique that assesses the statistical relationship between two variables.

While scientific considerations are a fundamental aspect of the research design, It is equally important that the researcher think practically before deciding on its structure. Here are some questions that you should think of;

• Do you have enough time to gather data and complete the write-up?
• Will you be able to collect the necessary data by interviewing a specific person or visiting a specific location?
• Do you have in-depth knowledge about the  different statistical analysis and data collection techniques to address the research questions  or test the  hypothesis ?

If you think that the chosen research design cannot answer the research questions properly, you can refine your research questions to gain better insight.

Step 2: Data Type you Need for Research

Decide on the type of data you need for your research. The type of data you need to collect depends on your research questions or research hypothesis. Two types of research data can be used to answer the research questions:

Primary Data Vs. Secondary Data

Qualitative vs. quantitative data.

Also, see; Research methods, design, and analysis .

Need help with a thesis chapter?

• Hire an expert from ResearchProspect today!
• Statistical analysis, research methodology, discussion of the results or conclusion – our experts can help you no matter how complex the requirements are.

Step 3: Data Collection Techniques

Once you have selected the type of research to answer your research question, you need to decide where and how to collect the data.

It is time to determine your research method to address the  research problem . Research methods involve procedures, techniques, materials, and tools used for the study.

For instance, a dissertation research design includes the different resources and data collection techniques and helps establish your  dissertation’s structure .

The following table shows the characteristics of the most popularly employed research methods.

Research Methods

Step 4: Procedure of Data Analysis

Use of the  correct data and statistical analysis technique is necessary for the validity of your research. Therefore, you need to be certain about the data type that would best address the research problem. Choosing an appropriate analysis method is the final step for the research design. It can be split into two main categories;

Quantitative Data Analysis

The quantitative data analysis technique involves analyzing the numerical data with the help of different applications such as; SPSS, STATA, Excel, origin lab, etc.

This data analysis strategy tests different variables such as spectrum, frequencies, averages, and more. The research question and the hypothesis must be established to identify the variables for testing.

Qualitative Data Analysis

Qualitative data analysis of figures, themes, and words allows for flexibility and the researcher’s subjective opinions. This means that the researcher’s primary focus will be interpreting patterns, tendencies, and accounts and understanding the implications and social framework.

You should be clear about your research objectives before starting to analyze the data. For example, you should ask yourself whether you need to explain respondents’ experiences and insights or do you also need to evaluate their responses with reference to a certain social framework.

Step 5: Write your Research Proposal

The research design is an important component of a research proposal because it plans the project’s execution. You can share it with the supervisor, who would evaluate the feasibility and capacity of the results  and  conclusion .

Read our guidelines to write a research proposal  if you have already formulated your research design. The research proposal is written in the future tense because you are writing your proposal before conducting research.

The  research methodology  or research design, on the other hand, is generally written in the past tense.

How to Write a Research Design – Conclusion

A research design is the plan, structure, strategy of investigation conceived to answer the research question and test the hypothesis. The dissertation research design can be classified based on the type of data and the type of analysis.

Above mentioned five steps are the answer to how to write a research design. So, follow these steps to  formulate the perfect research design for your dissertation .

ResearchProspect writers have years of experience creating research designs that align with the dissertation’s aim and objectives. If you are struggling with your dissertation methodology chapter, you might want to look at our dissertation part-writing service.

Our dissertation writers can also help you with the full dissertation paper . No matter how urgent or complex your need may be, ResearchProspect can help. We also offer PhD level research paper writing services.

Frequently Asked Questions

What is research design.

Research design is a systematic plan that guides the research process, outlining the methodology and procedures for collecting and analysing data. It determines the structure of the study, ensuring the research question is answered effectively, reliably, and validly. It serves as the blueprint for the entire research project.

How to write a research design?

To write a research design, define your research question, identify the research method (qualitative, quantitative, or mixed), choose data collection techniques (e.g., surveys, interviews), determine the sample size and sampling method, outline data analysis procedures, and highlight potential limitations and ethical considerations for the study.

How to write the design section of a research paper?

In the design section of a research paper, describe the research methodology chosen and justify its selection. Outline the data collection methods, participants or samples, instruments used, and procedures followed. Detail any experimental controls, if applicable. Ensure clarity and precision to enable replication of the study by other researchers.

How to write a research design in methodology?

To write a research design in methodology, clearly outline the research strategy (e.g., experimental, survey, case study). Describe the sampling technique, participants, and data collection methods. Detail the procedures for data collection and analysis. Justify choices by linking them to research objectives, addressing reliability and validity.

You May Also Like

Here we explore what is research problem in dissertation with research problem examples to help you understand how and when to write a research problem.

Repository of ten perfect research question examples will provide you a better perspective about how to create research questions.

Find how to write research questions with the mentioned steps required for a perfect research question. Choose an interesting topic and begin your research.

USEFUL LINKS

LEARNING RESOURCES

COMPANY DETAILS

• How It Works

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• Types of Research Designs
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

Introduction

Before beginning your paper, you need to decide how you plan to design the study .

The research design refers to the overall strategy and analytical approach that you have chosen in order to integrate, in a coherent and logical way, the different components of the study, thus ensuring that the research problem will be thoroughly investigated. It constitutes the blueprint for the collection, measurement, and interpretation of information and data. Note that the research problem determines the type of design you choose, not the other way around!

De Vaus, D. A. Research Design in Social Research . London: SAGE, 2001; Trochim, William M.K. Research Methods Knowledge Base. 2006.

General Structure and Writing Style

The function of a research design is to ensure that the evidence obtained enables you to effectively address the research problem logically and as unambiguously as possible . In social sciences research, obtaining information relevant to the research problem generally entails specifying the type of evidence needed to test the underlying assumptions of a theory, to evaluate a program, or to accurately describe and assess meaning related to an observable phenomenon.

With this in mind, a common mistake made by researchers is that they begin their investigations before they have thought critically about what information is required to address the research problem. Without attending to these design issues beforehand, the overall research problem will not be adequately addressed and any conclusions drawn will run the risk of being weak and unconvincing. As a consequence, the overall validity of the study will be undermined.

The length and complexity of describing the research design in your paper can vary considerably, but any well-developed description will achieve the following :

• Identify the research problem clearly and justify its selection, particularly in relation to any valid alternative designs that could have been used,
• Review and synthesize previously published literature associated with the research problem,
• Clearly and explicitly specify hypotheses [i.e., research questions] central to the problem,
• Effectively describe the information and/or data which will be necessary for an adequate testing of the hypotheses and explain how such information and/or data will be obtained, and
• Describe the methods of analysis to be applied to the data in determining whether or not the hypotheses are true or false.

The research design is usually incorporated into the introduction of your paper . You can obtain an overall sense of what to do by reviewing studies that have utilized the same research design [e.g., using a case study approach]. This can help you develop an outline to follow for your own paper.

NOTE : Use the SAGE Research Methods Online and Cases and the SAGE Research Methods Videos databases to search for scholarly resources on how to apply specific research designs and methods . The Research Methods Online database contains links to more than 175,000 pages of SAGE publisher's book, journal, and reference content on quantitative, qualitative, and mixed research methodologies. Also included is a collection of case studies of social research projects that can be used to help you better understand abstract or complex methodological concepts. The Research Methods Videos database contains hours of tutorials, interviews, video case studies, and mini-documentaries covering the entire research process.

Creswell, John W. and J. David Creswell. Research Design: Qualitative, Quantitative, and Mixed Methods Approaches . 5th edition. Thousand Oaks, CA: Sage, 2018; De Vaus, D. A. Research Design in Social Research . London: SAGE, 2001; Gorard, Stephen. Research Design: Creating Robust Approaches for the Social Sciences . Thousand Oaks, CA: Sage, 2013; Leedy, Paul D. and Jeanne Ellis Ormrod. Practical Research: Planning and Design . Tenth edition. Boston, MA: Pearson, 2013; Vogt, W. Paul, Dianna C. Gardner, and Lynne M. Haeffele. When to Use What Research Design . New York: Guilford, 2012.

Action Research Design

Definition and Purpose

The essentials of action research design follow a characteristic cycle whereby initially an exploratory stance is adopted, where an understanding of a problem is developed and plans are made for some form of interventionary strategy. Then the intervention is carried out [the "action" in action research] during which time, pertinent observations are collected in various forms. The new interventional strategies are carried out, and this cyclic process repeats, continuing until a sufficient understanding of [or a valid implementation solution for] the problem is achieved. The protocol is iterative or cyclical in nature and is intended to foster deeper understanding of a given situation, starting with conceptualizing and particularizing the problem and moving through several interventions and evaluations.

What do these studies tell you ?

• This is a collaborative and adaptive research design that lends itself to use in work or community situations.
• Design focuses on pragmatic and solution-driven research outcomes rather than testing theories.
• When practitioners use action research, it has the potential to increase the amount they learn consciously from their experience; the action research cycle can be regarded as a learning cycle.
• Action research studies often have direct and obvious relevance to improving practice and advocating for change.
• There are no hidden controls or preemption of direction by the researcher.

What these studies don't tell you ?

• It is harder to do than conducting conventional research because the researcher takes on responsibilities of advocating for change as well as for researching the topic.
• Action research is much harder to write up because it is less likely that you can use a standard format to report your findings effectively [i.e., data is often in the form of stories or observation].
• Personal over-involvement of the researcher may bias research results.
• The cyclic nature of action research to achieve its twin outcomes of action [e.g. change] and research [e.g. understanding] is time-consuming and complex to conduct.
• Advocating for change usually requires buy-in from study participants.

Coghlan, David and Mary Brydon-Miller. The Sage Encyclopedia of Action Research . Thousand Oaks, CA:  Sage, 2014; Efron, Sara Efrat and Ruth Ravid. Action Research in Education: A Practical Guide . New York: Guilford, 2013; Gall, Meredith. Educational Research: An Introduction . Chapter 18, Action Research. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007; Gorard, Stephen. Research Design: Creating Robust Approaches for the Social Sciences . Thousand Oaks, CA: Sage, 2013; Kemmis, Stephen and Robin McTaggart. “Participatory Action Research.” In Handbook of Qualitative Research . Norman Denzin and Yvonna S. Lincoln, eds. 2nd ed. (Thousand Oaks, CA: SAGE, 2000), pp. 567-605; McNiff, Jean. Writing and Doing Action Research . London: Sage, 2014; Reason, Peter and Hilary Bradbury. Handbook of Action Research: Participative Inquiry and Practice . Thousand Oaks, CA: SAGE, 2001.

Case Study Design

A case study is an in-depth study of a particular research problem rather than a sweeping statistical survey or comprehensive comparative inquiry. It is often used to narrow down a very broad field of research into one or a few easily researchable examples. The case study research design is also useful for testing whether a specific theory and model actually applies to phenomena in the real world. It is a useful design when not much is known about an issue or phenomenon.

• Approach excels at bringing us to an understanding of a complex issue through detailed contextual analysis of a limited number of events or conditions and their relationships.
• A researcher using a case study design can apply a variety of methodologies and rely on a variety of sources to investigate a research problem.
• Design can extend experience or add strength to what is already known through previous research.
• Social scientists, in particular, make wide use of this research design to examine contemporary real-life situations and provide the basis for the application of concepts and theories and the extension of methodologies.
• The design can provide detailed descriptions of specific and rare cases.
• A single or small number of cases offers little basis for establishing reliability or to generalize the findings to a wider population of people, places, or things.
• Intense exposure to the study of a case may bias a researcher's interpretation of the findings.
• Design does not facilitate assessment of cause and effect relationships.
• Vital information may be missing, making the case hard to interpret.
• The case may not be representative or typical of the larger problem being investigated.
• If the criteria for selecting a case is because it represents a very unusual or unique phenomenon or problem for study, then your interpretation of the findings can only apply to that particular case.

Case Studies. Writing@CSU. Colorado State University; Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 4, Flexible Methods: Case Study Design. 2nd ed. New York: Columbia University Press, 1999; Gerring, John. “What Is a Case Study and What Is It Good for?” American Political Science Review 98 (May 2004): 341-354; Greenhalgh, Trisha, editor. Case Study Evaluation: Past, Present and Future Challenges . Bingley, UK: Emerald Group Publishing, 2015; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Stake, Robert E. The Art of Case Study Research . Thousand Oaks, CA: SAGE, 1995; Yin, Robert K. Case Study Research: Design and Theory . Applied Social Research Methods Series, no. 5. 3rd ed. Thousand Oaks, CA: SAGE, 2003.

Causal Design

Causality studies may be thought of as understanding a phenomenon in terms of conditional statements in the form, “If X, then Y.” This type of research is used to measure what impact a specific change will have on existing norms and assumptions. Most social scientists seek causal explanations that reflect tests of hypotheses. Causal effect (nomothetic perspective) occurs when variation in one phenomenon, an independent variable, leads to or results, on average, in variation in another phenomenon, the dependent variable.

Conditions necessary for determining causality:

• Empirical association -- a valid conclusion is based on finding an association between the independent variable and the dependent variable.
• Appropriate time order -- to conclude that causation was involved, one must see that cases were exposed to variation in the independent variable before variation in the dependent variable.
• Nonspuriousness -- a relationship between two variables that is not due to variation in a third variable.
• Causality research designs assist researchers in understanding why the world works the way it does through the process of proving a causal link between variables and by the process of eliminating other possibilities.
• Replication is possible.
• There is greater confidence the study has internal validity due to the systematic subject selection and equity of groups being compared.
• Not all relationships are causal! The possibility always exists that, by sheer coincidence, two unrelated events appear to be related [e.g., Punxatawney Phil could accurately predict the duration of Winter for five consecutive years but, the fact remains, he's just a big, furry rodent].
• Conclusions about causal relationships are difficult to determine due to a variety of extraneous and confounding variables that exist in a social environment. This means causality can only be inferred, never proven.
• If two variables are correlated, the cause must come before the effect. However, even though two variables might be causally related, it can sometimes be difficult to determine which variable comes first and, therefore, to establish which variable is the actual cause and which is the  actual effect.

Beach, Derek and Rasmus Brun Pedersen. Causal Case Study Methods: Foundations and Guidelines for Comparing, Matching, and Tracing . Ann Arbor, MI: University of Michigan Press, 2016; Bachman, Ronet. The Practice of Research in Criminology and Criminal Justice . Chapter 5, Causation and Research Designs. 3rd ed. Thousand Oaks, CA: Pine Forge Press, 2007; Brewer, Ernest W. and Jennifer Kubn. “Causal-Comparative Design.” In Encyclopedia of Research Design . Neil J. Salkind, editor. (Thousand Oaks, CA: Sage, 2010), pp. 125-132; Causal Research Design: Experimentation. Anonymous SlideShare Presentation; Gall, Meredith. Educational Research: An Introduction . Chapter 11, Nonexperimental Research: Correlational Designs. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007; Trochim, William M.K. Research Methods Knowledge Base. 2006.

Cohort Design

Often used in the medical sciences, but also found in the applied social sciences, a cohort study generally refers to a study conducted over a period of time involving members of a population which the subject or representative member comes from, and who are united by some commonality or similarity. Using a quantitative framework, a cohort study makes note of statistical occurrence within a specialized subgroup, united by same or similar characteristics that are relevant to the research problem being investigated, rather than studying statistical occurrence within the general population. Using a qualitative framework, cohort studies generally gather data using methods of observation. Cohorts can be either "open" or "closed."

• Open Cohort Studies [dynamic populations, such as the population of Los Angeles] involve a population that is defined just by the state of being a part of the study in question (and being monitored for the outcome). Date of entry and exit from the study is individually defined, therefore, the size of the study population is not constant. In open cohort studies, researchers can only calculate rate based data, such as, incidence rates and variants thereof.
• Closed Cohort Studies [static populations, such as patients entered into a clinical trial] involve participants who enter into the study at one defining point in time and where it is presumed that no new participants can enter the cohort. Given this, the number of study participants remains constant (or can only decrease).
• The use of cohorts is often mandatory because a randomized control study may be unethical. For example, you cannot deliberately expose people to asbestos, you can only study its effects on those who have already been exposed. Research that measures risk factors often relies upon cohort designs.
• Because cohort studies measure potential causes before the outcome has occurred, they can demonstrate that these “causes” preceded the outcome, thereby avoiding the debate as to which is the cause and which is the effect.
• Cohort analysis is highly flexible and can provide insight into effects over time and related to a variety of different types of changes [e.g., social, cultural, political, economic, etc.].
• Either original data or secondary data can be used in this design.
• In cases where a comparative analysis of two cohorts is made [e.g., studying the effects of one group exposed to asbestos and one that has not], a researcher cannot control for all other factors that might differ between the two groups. These factors are known as confounding variables.
• Cohort studies can end up taking a long time to complete if the researcher must wait for the conditions of interest to develop within the group. This also increases the chance that key variables change during the course of the study, potentially impacting the validity of the findings.
• Due to the lack of randominization in the cohort design, its external validity is lower than that of study designs where the researcher randomly assigns participants.

Healy P, Devane D. “Methodological Considerations in Cohort Study Designs.” Nurse Researcher 18 (2011): 32-36; Glenn, Norval D, editor. Cohort Analysis . 2nd edition. Thousand Oaks, CA: Sage, 2005; Levin, Kate Ann. Study Design IV: Cohort Studies. Evidence-Based Dentistry 7 (2003): 51–52; Payne, Geoff. “Cohort Study.” In The SAGE Dictionary of Social Research Methods . Victor Jupp, editor. (Thousand Oaks, CA: Sage, 2006), pp. 31-33; Study Design 101. Himmelfarb Health Sciences Library. George Washington University, November 2011; Cohort Study. Wikipedia.

Cross-Sectional Design

Cross-sectional research designs have three distinctive features: no time dimension; a reliance on existing differences rather than change following intervention; and, groups are selected based on existing differences rather than random allocation. The cross-sectional design can only measure differences between or from among a variety of people, subjects, or phenomena rather than a process of change. As such, researchers using this design can only employ a relatively passive approach to making causal inferences based on findings.

• Cross-sectional studies provide a clear 'snapshot' of the outcome and the characteristics associated with it, at a specific point in time.
• Unlike an experimental design, where there is an active intervention by the researcher to produce and measure change or to create differences, cross-sectional designs focus on studying and drawing inferences from existing differences between people, subjects, or phenomena.
• Entails collecting data at and concerning one point in time. While longitudinal studies involve taking multiple measures over an extended period of time, cross-sectional research is focused on finding relationships between variables at one moment in time.
• Groups identified for study are purposely selected based upon existing differences in the sample rather than seeking random sampling.
• Cross-section studies are capable of using data from a large number of subjects and, unlike observational studies, is not geographically bound.
• Can estimate prevalence of an outcome of interest because the sample is usually taken from the whole population.
• Because cross-sectional designs generally use survey techniques to gather data, they are relatively inexpensive and take up little time to conduct.
• Finding people, subjects, or phenomena to study that are very similar except in one specific variable can be difficult.
• Results are static and time bound and, therefore, give no indication of a sequence of events or reveal historical or temporal contexts.
• Studies cannot be utilized to establish cause and effect relationships.
• This design only provides a snapshot of analysis so there is always the possibility that a study could have differing results if another time-frame had been chosen.
• There is no follow up to the findings.

Bethlehem, Jelke. "7: Cross-sectional Research." In Research Methodology in the Social, Behavioural and Life Sciences . Herman J Adèr and Gideon J Mellenbergh, editors. (London, England: Sage, 1999), pp. 110-43; Bourque, Linda B. “Cross-Sectional Design.” In  The SAGE Encyclopedia of Social Science Research Methods . Michael S. Lewis-Beck, Alan Bryman, and Tim Futing Liao. (Thousand Oaks, CA: 2004), pp. 230-231; Hall, John. “Cross-Sectional Survey Design.” In Encyclopedia of Survey Research Methods . Paul J. Lavrakas, ed. (Thousand Oaks, CA: Sage, 2008), pp. 173-174; Helen Barratt, Maria Kirwan. Cross-Sectional Studies: Design Application, Strengths and Weaknesses of Cross-Sectional Studies. Healthknowledge, 2009. Cross-Sectional Study. Wikipedia.

Descriptive Design

Descriptive research designs help provide answers to the questions of who, what, when, where, and how associated with a particular research problem; a descriptive study cannot conclusively ascertain answers to why. Descriptive research is used to obtain information concerning the current status of the phenomena and to describe "what exists" with respect to variables or conditions in a situation.

• The subject is being observed in a completely natural and unchanged natural environment. True experiments, whilst giving analyzable data, often adversely influence the normal behavior of the subject [a.k.a., the Heisenberg effect whereby measurements of certain systems cannot be made without affecting the systems].
• Descriptive research is often used as a pre-cursor to more quantitative research designs with the general overview giving some valuable pointers as to what variables are worth testing quantitatively.
• If the limitations are understood, they can be a useful tool in developing a more focused study.
• Descriptive studies can yield rich data that lead to important recommendations in practice.
• Appoach collects a large amount of data for detailed analysis.
• The results from a descriptive research cannot be used to discover a definitive answer or to disprove a hypothesis.
• Because descriptive designs often utilize observational methods [as opposed to quantitative methods], the results cannot be replicated.
• The descriptive function of research is heavily dependent on instrumentation for measurement and observation.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 5, Flexible Methods: Descriptive Research. 2nd ed. New York: Columbia University Press, 1999; Given, Lisa M. "Descriptive Research." In Encyclopedia of Measurement and Statistics . Neil J. Salkind and Kristin Rasmussen, editors. (Thousand Oaks, CA: Sage, 2007), pp. 251-254; McNabb, Connie. Descriptive Research Methodologies. Powerpoint Presentation; Shuttleworth, Martyn. Descriptive Research Design, September 26, 2008; Erickson, G. Scott. "Descriptive Research Design." In New Methods of Market Research and Analysis . (Northampton, MA: Edward Elgar Publishing, 2017), pp. 51-77; Sahin, Sagufta, and Jayanta Mete. "A Brief Study on Descriptive Research: Its Nature and Application in Social Science." International Journal of Research and Analysis in Humanities 1 (2021): 11; K. Swatzell and P. Jennings. “Descriptive Research: The Nuts and Bolts.” Journal of the American Academy of Physician Assistants 20 (2007), pp. 55-56; Kane, E. Doing Your Own Research: Basic Descriptive Research in the Social Sciences and Humanities . London: Marion Boyars, 1985.

Experimental Design

A blueprint of the procedure that enables the researcher to maintain control over all factors that may affect the result of an experiment. In doing this, the researcher attempts to determine or predict what may occur. Experimental research is often used where there is time priority in a causal relationship (cause precedes effect), there is consistency in a causal relationship (a cause will always lead to the same effect), and the magnitude of the correlation is great. The classic experimental design specifies an experimental group and a control group. The independent variable is administered to the experimental group and not to the control group, and both groups are measured on the same dependent variable. Subsequent experimental designs have used more groups and more measurements over longer periods. True experiments must have control, randomization, and manipulation.

• Experimental research allows the researcher to control the situation. In so doing, it allows researchers to answer the question, “What causes something to occur?”
• Permits the researcher to identify cause and effect relationships between variables and to distinguish placebo effects from treatment effects.
• Experimental research designs support the ability to limit alternative explanations and to infer direct causal relationships in the study.
• Approach provides the highest level of evidence for single studies.
• The design is artificial, and results may not generalize well to the real world.
• The artificial settings of experiments may alter the behaviors or responses of participants.
• Experimental designs can be costly if special equipment or facilities are needed.
• Some research problems cannot be studied using an experiment because of ethical or technical reasons.
• Difficult to apply ethnographic and other qualitative methods to experimentally designed studies.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 7, Flexible Methods: Experimental Research. 2nd ed. New York: Columbia University Press, 1999; Chapter 2: Research Design, Experimental Designs. School of Psychology, University of New England, 2000; Chow, Siu L. "Experimental Design." In Encyclopedia of Research Design . Neil J. Salkind, editor. (Thousand Oaks, CA: Sage, 2010), pp. 448-453; "Experimental Design." In Social Research Methods . Nicholas Walliman, editor. (London, England: Sage, 2006), pp, 101-110; Experimental Research. Research Methods by Dummies. Department of Psychology. California State University, Fresno, 2006; Kirk, Roger E. Experimental Design: Procedures for the Behavioral Sciences . 4th edition. Thousand Oaks, CA: Sage, 2013; Trochim, William M.K. Experimental Design. Research Methods Knowledge Base. 2006; Rasool, Shafqat. Experimental Research. Slideshare presentation.

Exploratory Design

An exploratory design is conducted about a research problem when there are few or no earlier studies to refer to or rely upon to predict an outcome . The focus is on gaining insights and familiarity for later investigation or undertaken when research problems are in a preliminary stage of investigation. Exploratory designs are often used to establish an understanding of how best to proceed in studying an issue or what methodology would effectively apply to gathering information about the issue.

The goals of exploratory research are intended to produce the following possible insights:

• Familiarity with basic details, settings, and concerns.
• Well grounded picture of the situation being developed.
• Generation of new ideas and assumptions.
• Development of tentative theories or hypotheses.
• Determination about whether a study is feasible in the future.
• Issues get refined for more systematic investigation and formulation of new research questions.
• Direction for future research and techniques get developed.
• Design is a useful approach for gaining background information on a particular topic.
• Exploratory research is flexible and can address research questions of all types (what, why, how).
• Provides an opportunity to define new terms and clarify existing concepts.
• Exploratory research is often used to generate formal hypotheses and develop more precise research problems.
• In the policy arena or applied to practice, exploratory studies help establish research priorities and where resources should be allocated.
• Exploratory research generally utilizes small sample sizes and, thus, findings are typically not generalizable to the population at large.
• The exploratory nature of the research inhibits an ability to make definitive conclusions about the findings. They provide insight but not definitive conclusions.
• The research process underpinning exploratory studies is flexible but often unstructured, leading to only tentative results that have limited value to decision-makers.
• Design lacks rigorous standards applied to methods of data gathering and analysis because one of the areas for exploration could be to determine what method or methodologies could best fit the research problem.

Cuthill, Michael. “Exploratory Research: Citizen Participation, Local Government, and Sustainable Development in Australia.” Sustainable Development 10 (2002): 79-89; Streb, Christoph K. "Exploratory Case Study." In Encyclopedia of Case Study Research . Albert J. Mills, Gabrielle Durepos and Eiden Wiebe, editors. (Thousand Oaks, CA: Sage, 2010), pp. 372-374; Taylor, P. J., G. Catalano, and D.R.F. Walker. “Exploratory Analysis of the World City Network.” Urban Studies 39 (December 2002): 2377-2394; Exploratory Research. Wikipedia.

Field Research Design

Sometimes referred to as ethnography or participant observation, designs around field research encompass a variety of interpretative procedures [e.g., observation and interviews] rooted in qualitative approaches to studying people individually or in groups while inhabiting their natural environment as opposed to using survey instruments or other forms of impersonal methods of data gathering. Information acquired from observational research takes the form of “ field notes ” that involves documenting what the researcher actually sees and hears while in the field. Findings do not consist of conclusive statements derived from numbers and statistics because field research involves analysis of words and observations of behavior. Conclusions, therefore, are developed from an interpretation of findings that reveal overriding themes, concepts, and ideas. More information can be found HERE .

• Field research is often necessary to fill gaps in understanding the research problem applied to local conditions or to specific groups of people that cannot be ascertained from existing data.
• The research helps contextualize already known information about a research problem, thereby facilitating ways to assess the origins, scope, and scale of a problem and to gage the causes, consequences, and means to resolve an issue based on deliberate interaction with people in their natural inhabited spaces.
• Enables the researcher to corroborate or confirm data by gathering additional information that supports or refutes findings reported in prior studies of the topic.
• Because the researcher in embedded in the field, they are better able to make observations or ask questions that reflect the specific cultural context of the setting being investigated.
• Observing the local reality offers the opportunity to gain new perspectives or obtain unique data that challenges existing theoretical propositions or long-standing assumptions found in the literature.

What these studies don't tell you

• A field research study requires extensive time and resources to carry out the multiple steps involved with preparing for the gathering of information, including for example, examining background information about the study site, obtaining permission to access the study site, and building trust and rapport with subjects.
• Requires a commitment to staying engaged in the field to ensure that you can adequately document events and behaviors as they unfold.
• The unpredictable nature of fieldwork means that researchers can never fully control the process of data gathering. They must maintain a flexible approach to studying the setting because events and circumstances can change quickly or unexpectedly.
• Findings can be difficult to interpret and verify without access to documents and other source materials that help to enhance the credibility of information obtained from the field  [i.e., the act of triangulating the data].
• Linking the research problem to the selection of study participants inhabiting their natural environment is critical. However, this specificity limits the ability to generalize findings to different situations or in other contexts or to infer courses of action applied to other settings or groups of people.
• The reporting of findings must take into account how the researcher themselves may have inadvertently affected respondents and their behaviors.

Historical Design

The purpose of a historical research design is to collect, verify, and synthesize evidence from the past to establish facts that defend or refute a hypothesis. It uses secondary sources and a variety of primary documentary evidence, such as, diaries, official records, reports, archives, and non-textual information [maps, pictures, audio and visual recordings]. The limitation is that the sources must be both authentic and valid.

• The historical research design is unobtrusive; the act of research does not affect the results of the study.
• The historical approach is well suited for trend analysis.
• Historical records can add important contextual background required to more fully understand and interpret a research problem.
• There is often no possibility of researcher-subject interaction that could affect the findings.
• Historical sources can be used over and over to study different research problems or to replicate a previous study.
• The ability to fulfill the aims of your research are directly related to the amount and quality of documentation available to understand the research problem.
• Since historical research relies on data from the past, there is no way to manipulate it to control for contemporary contexts.
• Interpreting historical sources can be very time consuming.
• The sources of historical materials must be archived consistently to ensure access. This may especially challenging for digital or online-only sources.
• Original authors bring their own perspectives and biases to the interpretation of past events and these biases are more difficult to ascertain in historical resources.
• Due to the lack of control over external variables, historical research is very weak with regard to the demands of internal validity.
• It is rare that the entirety of historical documentation needed to fully address a research problem is available for interpretation, therefore, gaps need to be acknowledged.

Howell, Martha C. and Walter Prevenier. From Reliable Sources: An Introduction to Historical Methods . Ithaca, NY: Cornell University Press, 2001; Lundy, Karen Saucier. "Historical Research." In The Sage Encyclopedia of Qualitative Research Methods . Lisa M. Given, editor. (Thousand Oaks, CA: Sage, 2008), pp. 396-400; Marius, Richard. and Melvin E. Page. A Short Guide to Writing about History . 9th edition. Boston, MA: Pearson, 2015; Savitt, Ronald. “Historical Research in Marketing.” Journal of Marketing 44 (Autumn, 1980): 52-58;  Gall, Meredith. Educational Research: An Introduction . Chapter 16, Historical Research. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007.

Longitudinal Design

A longitudinal study follows the same sample over time and makes repeated observations. For example, with longitudinal surveys, the same group of people is interviewed at regular intervals, enabling researchers to track changes over time and to relate them to variables that might explain why the changes occur. Longitudinal research designs describe patterns of change and help establish the direction and magnitude of causal relationships. Measurements are taken on each variable over two or more distinct time periods. This allows the researcher to measure change in variables over time. It is a type of observational study sometimes referred to as a panel study.

• Longitudinal data facilitate the analysis of the duration of a particular phenomenon.
• Enables survey researchers to get close to the kinds of causal explanations usually attainable only with experiments.
• The design permits the measurement of differences or change in a variable from one period to another [i.e., the description of patterns of change over time].
• Longitudinal studies facilitate the prediction of future outcomes based upon earlier factors.
• The data collection method may change over time.
• Maintaining the integrity of the original sample can be difficult over an extended period of time.
• It can be difficult to show more than one variable at a time.
• This design often needs qualitative research data to explain fluctuations in the results.
• A longitudinal research design assumes present trends will continue unchanged.
• It can take a long period of time to gather results.
• There is a need to have a large sample size and accurate sampling to reach representativness.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 6, Flexible Methods: Relational and Longitudinal Research. 2nd ed. New York: Columbia University Press, 1999; Forgues, Bernard, and Isabelle Vandangeon-Derumez. "Longitudinal Analyses." In Doing Management Research . Raymond-Alain Thiétart and Samantha Wauchope, editors. (London, England: Sage, 2001), pp. 332-351; Kalaian, Sema A. and Rafa M. Kasim. "Longitudinal Studies." In Encyclopedia of Survey Research Methods . Paul J. Lavrakas, ed. (Thousand Oaks, CA: Sage, 2008), pp. 440-441; Menard, Scott, editor. Longitudinal Research . Thousand Oaks, CA: Sage, 2002; Ployhart, Robert E. and Robert J. Vandenberg. "Longitudinal Research: The Theory, Design, and Analysis of Change.” Journal of Management 36 (January 2010): 94-120; Longitudinal Study. Wikipedia.

Meta-Analysis Design

Meta-analysis is an analytical methodology designed to systematically evaluate and summarize the results from a number of individual studies, thereby, increasing the overall sample size and the ability of the researcher to study effects of interest. The purpose is to not simply summarize existing knowledge, but to develop a new understanding of a research problem using synoptic reasoning. The main objectives of meta-analysis include analyzing differences in the results among studies and increasing the precision by which effects are estimated. A well-designed meta-analysis depends upon strict adherence to the criteria used for selecting studies and the availability of information in each study to properly analyze their findings. Lack of information can severely limit the type of analyzes and conclusions that can be reached. In addition, the more dissimilarity there is in the results among individual studies [heterogeneity], the more difficult it is to justify interpretations that govern a valid synopsis of results. A meta-analysis needs to fulfill the following requirements to ensure the validity of your findings:

• Clearly defined description of objectives, including precise definitions of the variables and outcomes that are being evaluated;
• A well-reasoned and well-documented justification for identification and selection of the studies;
• Assessment and explicit acknowledgment of any researcher bias in the identification and selection of those studies;
• Description and evaluation of the degree of heterogeneity among the sample size of studies reviewed; and,
• Justification of the techniques used to evaluate the studies.
• Can be an effective strategy for determining gaps in the literature.
• Provides a means of reviewing research published about a particular topic over an extended period of time and from a variety of sources.
• Is useful in clarifying what policy or programmatic actions can be justified on the basis of analyzing research results from multiple studies.
• Provides a method for overcoming small sample sizes in individual studies that previously may have had little relationship to each other.
• Can be used to generate new hypotheses or highlight research problems for future studies.
• Small violations in defining the criteria used for content analysis can lead to difficult to interpret and/or meaningless findings.
• A large sample size can yield reliable, but not necessarily valid, results.
• A lack of uniformity regarding, for example, the type of literature reviewed, how methods are applied, and how findings are measured within the sample of studies you are analyzing, can make the process of synthesis difficult to perform.
• Depending on the sample size, the process of reviewing and synthesizing multiple studies can be very time consuming.

Beck, Lewis W. "The Synoptic Method." The Journal of Philosophy 36 (1939): 337-345; Cooper, Harris, Larry V. Hedges, and Jeffrey C. Valentine, eds. The Handbook of Research Synthesis and Meta-Analysis . 2nd edition. New York: Russell Sage Foundation, 2009; Guzzo, Richard A., Susan E. Jackson and Raymond A. Katzell. “Meta-Analysis Analysis.” In Research in Organizational Behavior , Volume 9. (Greenwich, CT: JAI Press, 1987), pp 407-442; Lipsey, Mark W. and David B. Wilson. Practical Meta-Analysis . Thousand Oaks, CA: Sage Publications, 2001; Study Design 101. Meta-Analysis. The Himmelfarb Health Sciences Library, George Washington University; Timulak, Ladislav. “Qualitative Meta-Analysis.” In The SAGE Handbook of Qualitative Data Analysis . Uwe Flick, editor. (Los Angeles, CA: Sage, 2013), pp. 481-495; Walker, Esteban, Adrian V. Hernandez, and Micheal W. Kattan. "Meta-Analysis: It's Strengths and Limitations." Cleveland Clinic Journal of Medicine 75 (June 2008): 431-439.

Mixed-Method Design

• Narrative and non-textual information can add meaning to numeric data, while numeric data can add precision to narrative and non-textual information.
• Can utilize existing data while at the same time generating and testing a grounded theory approach to describe and explain the phenomenon under study.
• A broader, more complex research problem can be investigated because the researcher is not constrained by using only one method.
• The strengths of one method can be used to overcome the inherent weaknesses of another method.
• Can provide stronger, more robust evidence to support a conclusion or set of recommendations.
• May generate new knowledge new insights or uncover hidden insights, patterns, or relationships that a single methodological approach might not reveal.
• Produces more complete knowledge and understanding of the research problem that can be used to increase the generalizability of findings applied to theory or practice.
• A researcher must be proficient in understanding how to apply multiple methods to investigating a research problem as well as be proficient in optimizing how to design a study that coherently melds them together.
• Can increase the likelihood of conflicting results or ambiguous findings that inhibit drawing a valid conclusion or setting forth a recommended course of action [e.g., sample interview responses do not support existing statistical data].
• Because the research design can be very complex, reporting the findings requires a well-organized narrative, clear writing style, and precise word choice.
• Design invites collaboration among experts. However, merging different investigative approaches and writing styles requires more attention to the overall research process than studies conducted using only one methodological paradigm.
• Concurrent merging of quantitative and qualitative research requires greater attention to having adequate sample sizes, using comparable samples, and applying a consistent unit of analysis. For sequential designs where one phase of qualitative research builds on the quantitative phase or vice versa, decisions about what results from the first phase to use in the next phase, the choice of samples and estimating reasonable sample sizes for both phases, and the interpretation of results from both phases can be difficult.
• Due to multiple forms of data being collected and analyzed, this design requires extensive time and resources to carry out the multiple steps involved in data gathering and interpretation.

Burch, Patricia and Carolyn J. Heinrich. Mixed Methods for Policy Research and Program Evaluation . Thousand Oaks, CA: Sage, 2016; Creswell, John w. et al. Best Practices for Mixed Methods Research in the Health Sciences . Bethesda, MD: Office of Behavioral and Social Sciences Research, National Institutes of Health, 2010Creswell, John W. Research Design: Qualitative, Quantitative, and Mixed Methods Approaches . 4th edition. Thousand Oaks, CA: Sage Publications, 2014; Domínguez, Silvia, editor. Mixed Methods Social Networks Research . Cambridge, UK: Cambridge University Press, 2014; Hesse-Biber, Sharlene Nagy. Mixed Methods Research: Merging Theory with Practice . New York: Guilford Press, 2010; Niglas, Katrin. “How the Novice Researcher Can Make Sense of Mixed Methods Designs.” International Journal of Multiple Research Approaches 3 (2009): 34-46; Onwuegbuzie, Anthony J. and Nancy L. Leech. “Linking Research Questions to Mixed Methods Data Analysis Procedures.” The Qualitative Report 11 (September 2006): 474-498; Tashakorri, Abbas and John W. Creswell. “The New Era of Mixed Methods.” Journal of Mixed Methods Research 1 (January 2007): 3-7; Zhanga, Wanqing. “Mixed Methods Application in Health Intervention Research: A Multiple Case Study.” International Journal of Multiple Research Approaches 8 (2014): 24-35 .

Observational Design

This type of research design draws a conclusion by comparing subjects against a control group, in cases where the researcher has no control over the experiment. There are two general types of observational designs. In direct observations, people know that you are watching them. Unobtrusive measures involve any method for studying behavior where individuals do not know they are being observed. An observational study allows a useful insight into a phenomenon and avoids the ethical and practical difficulties of setting up a large and cumbersome research project.

• Observational studies are usually flexible and do not necessarily need to be structured around a hypothesis about what you expect to observe [data is emergent rather than pre-existing].
• The researcher is able to collect in-depth information about a particular behavior.
• Can reveal interrelationships among multifaceted dimensions of group interactions.
• You can generalize your results to real life situations.
• Observational research is useful for discovering what variables may be important before applying other methods like experiments.
• Observation research designs account for the complexity of group behaviors.
• Reliability of data is low because seeing behaviors occur over and over again may be a time consuming task and are difficult to replicate.
• In observational research, findings may only reflect a unique sample population and, thus, cannot be generalized to other groups.
• There can be problems with bias as the researcher may only "see what they want to see."
• There is no possibility to determine "cause and effect" relationships since nothing is manipulated.
• Sources or subjects may not all be equally credible.
• Any group that is knowingly studied is altered to some degree by the presence of the researcher, therefore, potentially skewing any data collected.

Atkinson, Paul and Martyn Hammersley. “Ethnography and Participant Observation.” In Handbook of Qualitative Research . Norman K. Denzin and Yvonna S. Lincoln, eds. (Thousand Oaks, CA: Sage, 1994), pp. 248-261; Observational Research. Research Methods by Dummies. Department of Psychology. California State University, Fresno, 2006; Patton Michael Quinn. Qualitiative Research and Evaluation Methods . Chapter 6, Fieldwork Strategies and Observational Methods. 3rd ed. Thousand Oaks, CA: Sage, 2002; Payne, Geoff and Judy Payne. "Observation." In Key Concepts in Social Research . The SAGE Key Concepts series. (London, England: Sage, 2004), pp. 158-162; Rosenbaum, Paul R. Design of Observational Studies . New York: Springer, 2010;Williams, J. Patrick. "Nonparticipant Observation." In The Sage Encyclopedia of Qualitative Research Methods . Lisa M. Given, editor.(Thousand Oaks, CA: Sage, 2008), pp. 562-563.

Philosophical Design

Understood more as an broad approach to examining a research problem than a methodological design, philosophical analysis and argumentation is intended to challenge deeply embedded, often intractable, assumptions underpinning an area of study. This approach uses the tools of argumentation derived from philosophical traditions, concepts, models, and theories to critically explore and challenge, for example, the relevance of logic and evidence in academic debates, to analyze arguments about fundamental issues, or to discuss the root of existing discourse about a research problem. These overarching tools of analysis can be framed in three ways:

• Ontology -- the study that describes the nature of reality; for example, what is real and what is not, what is fundamental and what is derivative?
• Epistemology -- the study that explores the nature of knowledge; for example, by what means does knowledge and understanding depend upon and how can we be certain of what we know?
• Axiology -- the study of values; for example, what values does an individual or group hold and why? How are values related to interest, desire, will, experience, and means-to-end? And, what is the difference between a matter of fact and a matter of value?
• Can provide a basis for applying ethical decision-making to practice.
• Functions as a means of gaining greater self-understanding and self-knowledge about the purposes of research.
• Brings clarity to general guiding practices and principles of an individual or group.
• Philosophy informs methodology.
• Refine concepts and theories that are invoked in relatively unreflective modes of thought and discourse.
• Beyond methodology, philosophy also informs critical thinking about epistemology and the structure of reality (metaphysics).
• Offers clarity and definition to the practical and theoretical uses of terms, concepts, and ideas.
• Limited application to specific research problems [answering the "So What?" question in social science research].
• Analysis can be abstract, argumentative, and limited in its practical application to real-life issues.
• While a philosophical analysis may render problematic that which was once simple or taken-for-granted, the writing can be dense and subject to unnecessary jargon, overstatement, and/or excessive quotation and documentation.
• There are limitations in the use of metaphor as a vehicle of philosophical analysis.
• There can be analytical difficulties in moving from philosophy to advocacy and between abstract thought and application to the phenomenal world.

Burton, Dawn. "Part I, Philosophy of the Social Sciences." In Research Training for Social Scientists . (London, England: Sage, 2000), pp. 1-5; Chapter 4, Research Methodology and Design. Unisa Institutional Repository (UnisaIR), University of South Africa; Jarvie, Ian C., and Jesús Zamora-Bonilla, editors. The SAGE Handbook of the Philosophy of Social Sciences . London: Sage, 2011; Labaree, Robert V. and Ross Scimeca. “The Philosophical Problem of Truth in Librarianship.” The Library Quarterly 78 (January 2008): 43-70; Maykut, Pamela S. Beginning Qualitative Research: A Philosophic and Practical Guide . Washington, DC: Falmer Press, 1994; McLaughlin, Hugh. "The Philosophy of Social Research." In Understanding Social Work Research . 2nd edition. (London: SAGE Publications Ltd., 2012), pp. 24-47; Stanford Encyclopedia of Philosophy . Metaphysics Research Lab, CSLI, Stanford University, 2013.

Sequential Design

• The researcher has a limitless option when it comes to sample size and the sampling schedule.
• Due to the repetitive nature of this research design, minor changes and adjustments can be done during the initial parts of the study to correct and hone the research method.
• This is a useful design for exploratory studies.
• There is very little effort on the part of the researcher when performing this technique. It is generally not expensive, time consuming, or workforce intensive.
• Because the study is conducted serially, the results of one sample are known before the next sample is taken and analyzed. This provides opportunities for continuous improvement of sampling and methods of analysis.
• The sampling method is not representative of the entire population. The only possibility of approaching representativeness is when the researcher chooses to use a very large sample size significant enough to represent a significant portion of the entire population. In this case, moving on to study a second or more specific sample can be difficult.
• The design cannot be used to create conclusions and interpretations that pertain to an entire population because the sampling technique is not randomized. Generalizability from findings is, therefore, limited.
• Difficult to account for and interpret variation from one sample to another over time, particularly when using qualitative methods of data collection.

Betensky, Rebecca. Harvard University, Course Lecture Note slides; Bovaird, James A. and Kevin A. Kupzyk. "Sequential Design." In Encyclopedia of Research Design . Neil J. Salkind, editor. (Thousand Oaks, CA: Sage, 2010), pp. 1347-1352; Cresswell, John W. Et al. “Advanced Mixed-Methods Research Designs.” In Handbook of Mixed Methods in Social and Behavioral Research . Abbas Tashakkori and Charles Teddle, eds. (Thousand Oaks, CA: Sage, 2003), pp. 209-240; Henry, Gary T. "Sequential Sampling." In The SAGE Encyclopedia of Social Science Research Methods . Michael S. Lewis-Beck, Alan Bryman and Tim Futing Liao, editors. (Thousand Oaks, CA: Sage, 2004), pp. 1027-1028; Nataliya V. Ivankova. “Using Mixed-Methods Sequential Explanatory Design: From Theory to Practice.” Field Methods 18 (February 2006): 3-20; Bovaird, James A. and Kevin A. Kupzyk. “Sequential Design.” In Encyclopedia of Research Design . Neil J. Salkind, ed. Thousand Oaks, CA: Sage, 2010; Sequential Analysis. Wikipedia.

Systematic Review

• A systematic review synthesizes the findings of multiple studies related to each other by incorporating strategies of analysis and interpretation intended to reduce biases and random errors.
• The application of critical exploration, evaluation, and synthesis methods separates insignificant, unsound, or redundant research from the most salient and relevant studies worthy of reflection.
• They can be use to identify, justify, and refine hypotheses, recognize and avoid hidden problems in prior studies, and explain data inconsistencies and conflicts in data.
• Systematic reviews can be used to help policy makers formulate evidence-based guidelines and regulations.
• The use of strict, explicit, and pre-determined methods of synthesis, when applied appropriately, provide reliable estimates about the effects of interventions, evaluations, and effects related to the overarching research problem investigated by each study under review.
• Systematic reviews illuminate where knowledge or thorough understanding of a research problem is lacking and, therefore, can then be used to guide future research.
• The accepted inclusion of unpublished studies [i.e., grey literature] ensures the broadest possible way to analyze and interpret research on a topic.
• Results of the synthesis can be generalized and the findings extrapolated into the general population with more validity than most other types of studies .
• Systematic reviews do not create new knowledge per se; they are a method for synthesizing existing studies about a research problem in order to gain new insights and determine gaps in the literature.
• The way researchers have carried out their investigations [e.g., the period of time covered, number of participants, sources of data analyzed, etc.] can make it difficult to effectively synthesize studies.
• The inclusion of unpublished studies can introduce bias into the review because they may not have undergone a rigorous peer-review process prior to publication. Examples may include conference presentations or proceedings, publications from government agencies, white papers, working papers, and internal documents from organizations, and doctoral dissertations and Master's theses.

Denyer, David and David Tranfield. "Producing a Systematic Review." In The Sage Handbook of Organizational Research Methods .  David A. Buchanan and Alan Bryman, editors. ( Thousand Oaks, CA: Sage Publications, 2009), pp. 671-689; Foster, Margaret J. and Sarah T. Jewell, editors. Assembling the Pieces of a Systematic Review: A Guide for Librarians . Lanham, MD: Rowman and Littlefield, 2017; Gough, David, Sandy Oliver, James Thomas, editors. Introduction to Systematic Reviews . 2nd edition. Los Angeles, CA: Sage Publications, 2017; Gopalakrishnan, S. and P. Ganeshkumar. “Systematic Reviews and Meta-analysis: Understanding the Best Evidence in Primary Healthcare.” Journal of Family Medicine and Primary Care 2 (2013): 9-14; Gough, David, James Thomas, and Sandy Oliver. "Clarifying Differences between Review Designs and Methods." Systematic Reviews 1 (2012): 1-9; Khan, Khalid S., Regina Kunz, Jos Kleijnen, and Gerd Antes. “Five Steps to Conducting a Systematic Review.” Journal of the Royal Society of Medicine 96 (2003): 118-121; Mulrow, C. D. “Systematic Reviews: Rationale for Systematic Reviews.” BMJ 309:597 (September 1994); O'Dwyer, Linda C., and Q. Eileen Wafford. "Addressing Challenges with Systematic Review Teams through Effective Communication: A Case Report." Journal of the Medical Library Association 109 (October 2021): 643-647; Okoli, Chitu, and Kira Schabram. "A Guide to Conducting a Systematic Literature Review of Information Systems Research."  Sprouts: Working Papers on Information Systems 10 (2010); Siddaway, Andy P., Alex M. Wood, and Larry V. Hedges. "How to Do a Systematic Review: A Best Practice Guide for Conducting and Reporting Narrative Reviews, Meta-analyses, and Meta-syntheses." Annual Review of Psychology 70 (2019): 747-770; Torgerson, Carole J. “Publication Bias: The Achilles’ Heel of Systematic Reviews?” British Journal of Educational Studies 54 (March 2006): 89-102; Torgerson, Carole. Systematic Reviews . New York: Continuum, 2003.

• << Previous: Purpose of Guide
• Next: Design Flaws to Avoid >>
• Last Updated: May 2, 2024 4:39 PM
• URL: https://libguides.usc.edu/writingguide

What’s Included: Methodology Template

This template covers all the core components required in the research methodology chapter or section of a typical dissertation or thesis, including:

• The opening section
• Research philosophy
• Research type
• Research strategy
• Time horizon
• Sampling strategy
• Data collection methods
• Data analysis methods
• Conclusion & summary

The purpose of each section is explained in plain language, followed by an overview of the key elements that you need to cover. The template also includes practical examples to help you understand exactly what’s required, along with links to additional free resources (articles, videos, etc.) to help you along your research journey.

The cleanly-formatted Google Doc can be downloaded as a fully editable MS Word Document (DOCX format), so you can use it as-is or convert it to LaTeX.

PS – if you’d like a high-level template for the entire thesis, you can we’ve got that too .

What format is the template (DOC, PDF, PPT, etc.)?

The methodology chapter template is provided as a Google Doc. You can download it in MS Word format or make a copy to your Google Drive. You’re also welcome to convert it to whatever format works best for you, such as LaTeX or PDF.

What types of dissertations/theses can this template be used for?

The methodology template follows the standard format for academic research projects, which means it will be suitable for the vast majority of dissertations and theses (especially those within the sciences), whether they adopt a qualitative, quantitative, or mixed-methods approach. The template is loosely based on Saunders’ research onion , which is recommended as a methodological framework by many universities.

Keep in mind that the exact requirements for the methodology chapter/section will vary between universities and degree programs. These are typically minor, but it’s always a good idea to double-check your university’s requirements before you finalize your structure.

Is this template for an undergrad, Master or PhD-level thesis?

This template can be used for a dissertation, thesis or research project at any level of study. Doctoral-level projects typically require the methodology chapter to be more extensive/comprehensive, but the structure will typically remain the same.

How long should the methodology chapter be?

This can vary a fair deal, depending on the level of study (undergrad, Master or Doctoral), the field of research, as well as your university’s specific requirements. Therefore, it’s best to check with your university or review past dissertations from your program to get an accurate estimate. 

How detailed should my methodology be?

As a rule of thumb, you should provide enough detail for another researcher to replicate your study. This includes clear descriptions of procedures, tools, and techniques you used to collect and analyse your data, as well as your sampling approach.

How technical should my language be in this chapter?

In the methodology chapter, your language should be technical enough to accurately convey your research methods and processes, but also clear and precise to ensure it’s accessible to readers within your field.

Aim for a balance where the technical aspects of your methods are thoroughly explained without overusing jargon or overly complex language.

Should I include a pilot study in my methodology?

If you conducted a pilot study, you can include it in the methodology to demonstrate the feasibility and refinement of your methods. Be sure to obtain the necessary permissions from your research advisor before conducting any pilot studies, though. 

Can I share this template with my friends/colleagues?

Yes, you’re welcome to share this template in its original format (no editing allowed). If you want to post about it on your blog or social media, we kindly request that you reference this page as your source.

Do you have templates for the other chapters?

Yes, we do. We are constantly developing our collection of free resources to help students complete their dissertations and theses. You can view all of our template resources here .

Can Grad Coach help me with my methodology?

Yes, we can assist with your methodology chapter (or any other chapter) on a coaching basis. If you’re interested, feel free to get in touch to discuss our private coaching services .

• How It Works
• PhD thesis writing
• Master thesis writing
• Bachelor thesis writing
• Dissertation writing service
• Dissertation abstract writing
• Thesis proposal writing
• Thesis editing service
• Thesis proofreading service
• Thesis formatting service
• Coursework writing service
• Research paper writing service
• Architecture thesis writing
• Computer science thesis writing
• Engineering thesis writing
• History thesis writing
• MBA thesis writing
• Nursing dissertation writing
• Psychology dissertation writing
• Sociology thesis writing
• Statistics dissertation writing
• Buy dissertation online
• Write my dissertation
• Cheap thesis
• Cheap dissertation
• Custom dissertation
• Dissertation help
• Pay for thesis
• Pay for dissertation
• Senior thesis
• Write my thesis

How To Write A Research Design Like A Pro

The overall strategy that a researcher chooses to address all the different parts of their study in a logical and clear manner is known as a research design.

So, what is research design in research paper? A research design is a general plan explaining what one looks to do so as to answer the research question. Generally, it is a detailed outline of how research or an investigation will take place including; how data will be collected, which tools will be employed and how they will be used, and the ways through with the data will be analyzed.

It lays out the method you use to collect, measure, and analyze information. It states that you do this logically and coherently to ensure that you thoroughly address the research problem with which you are dealing. There are numerous types of research design including:

Action Study Research Design Case Study Research Design Casual Research Design Cohort Research Design Cross-Sectional Research Design Correlational Research Design Descriptive Research Design Experimental Research Design Exploratory Research Design Historical Research Design Longitudinal Research Design Observational Research Design Philosophical Research Design Qualitative Research Design Quantitative Research Design Sequential Research Design

The research paper design you choose depends on the research problem. You should analyze the problem carefully and consider it from numerous perspectives. You may consider using a mixed methods research design which is a combination of any two designs listed above. But you must choose a type of research design that is strong and will make your project progress smoothly.

Example Of A Nursing Research Design

To assess the links between professional satisfaction, job satisfaction, and contributing factors using a quantitative approach, an appropriate method is to gain use questionnaires or surveys that provide numerical data from the sample. To achieve an appropriate sample, a sampling plan should be developed. In this case, the population of concern will be identified. This will be nursing staff members, possibly across a wide range of departments to gain a better insight into the links overall. A stratified sampling method would be appropriate here to ensure that the sample is made up of sub-populations that are in line with the sub-populations of the total: the strata should include gender, number of years in nursing, department, and any other factors that could be confounding variables. This will ensure that the sample is representative of the population of interest. In a population of 1000 nurses, a confidence interval of five, and a confidence level of 99%, the sample size needed is 400. Inclusion criteria will include: nursing staff working at the hospital, ability to speak the language that the survey is administered in, and those that have given informed consent. Exclusion criteria will be visiting nursing staff, staff who are not nurses, and those that do not hold relevant nursing criteria.

Sampling Plan: Qualitative

A more appropriate methodology for qualitative approaches is to use interviews or focus groups. This means that the sample size can be much smaller, often as low as ten. In this case, the sampling plan will have the same population of concern, but a different approach to sampling can be used. It may be more appropriate to use quota, self-selection sampling here, as nursing staff need to be willing to give up some time to respond. This has drawbacks, including self-selection bias, but it would be unethical to force nursing staff to participate in the project, especially considering interviews can take one hour or more. The inclusion and exclusion criteria are as above.

How to Write a Research Design Proposal

For most research problems, you will have to make some tradeoffs. One design can be strong in some areas and weak in other areas. This is the reason many students choose to select more than one design to gather all the information accurately and effectively they need to address the problem. This is one of the first things you should know about how to write research design and methods section.

• Consider Your Practicalities and Priorities

What do we mean when we say you need to think about practicalities and priorities? Another thing to know about how to write design and methodology of the research is asking several questions before settling on one or two methodologies. You will not have the time or resources to conduct tests using several research designs, so you need to write down and answer precisely what your priorities are and the practical nature of your study.

A good place to start is at the library where you have access to other academic studies in your field. You can find similar studies and look at published samples that have been approved by experts in the field. You can also get a sense of the number of resources you have available. Pre-planning is a great way of making sure your project stays on track.

• Determine the Kind of Information You Need

The next to know about how to write a qualitative research design is figuring out the kind of information or data you need to answer the research problem. There are two places where you get this: through primary and secondary data. In your research study, you get original data through experiments, interviews, and surveys. This is information you analyze and incorporate into your research finding.

Your study will also incorporate information gathered by someone else in previous studies. This type of data is available in libraries and online databases where you can look at national statistics, official records, and publications from academic and government sources.

• Identify How You Are Going to Collect Information

Once you know the kind of information you need to gather (qualitative and quantitative) you need to decide where, when, and how you will gather it. How to write a research design requires you to describe your research methods. This means putting in detail the materials, procedures, tools, and techniques you will use and apply. You also need to point out the criteria you will use to choose your participants and sources. (For example, how many participants will you need to fill out services to get a good method to sample).

• Decide How You Are Going to Analyze the Information

Another thing you need to know about how to write a research design relates to the way you are going to analyze the information you collect. The process of analysis is the last step you need to develop your research design. Numerous computer applications will sort through information and retrieve what you need to answer the research problem (For example, Access and Excel). Identify the ones you will use and state this in the research design.

• Draft Your Research Design as You Would Other Sections

Now you can start writing the first draft. You should approach this like you would other academic assignments. Use a draft that lists all the sub-sections you need to address in the research design. Be clear and concise. The research design should not include your opinions. It must show the reader an exact description of the way you conducted your study.

• Revise Your Research Design After Some Time Away

Hindsight is one of the best things that can come from separating yourself from your assignment for a few days. We recommend students remove themselves completely from their work to get a mental break. The distance will help them rethink their writing and make changes that improve the overall quality of an assignment.

The trick is to do stay away a few days instead of just a few hours. The time away from any piece of writing will allow for more self-evaluation that is objective. Many students will find ways to remove, add, or rearrange words, phrases, sentences, and paragraphs that make their assignments stronger.

• Edit and Proofread Your Research Design for Perfection

These two activities are not interchangeable. Editing focuses on deep issues like correcting sentence constructions and word choices. A thorough editing session will improve things like clarity, readability, and tone. Proofreading focuses on details like grammar, punctuation, and misspellings. It will also look at page numbering, formatting, alignment, and visual elements.

Both activities are important stages of the writing process. A great editor will begin his or her work during the revising process. A great proofread will also begin his or her work during the editing process. While they may overlap you should always treat them as two separate tasks and designate enough time to do each without distraction.

• Have a Colleague Review Your Work for Feedback

Having a colleague or peer review your work is an important step to the academic writing process. A person or a group of people that understands your field and the high standard of researching and writing that comes with putting together a great research paper can valuable toward your success at the collegiate and graduate levels. Even if you can only show your work to one person for a few hours, his or her feedback can help you make changes to improve the overall quality of your research design.

Here are some questions you should consider before asking someone to review your work:

Do they understand the research subject and/or topic? Do they know the professor or panel that will grade your work? Have they submitted research studies in the past? Do they have great to excellent grades when it comes to research? Are they committed to providing you constructive criticism and feedback?

What to Do If You Can’t Do the Research Design

You may not have enough time to create this section, especially when you have a short deadline. On these occasions, it is a good idea to find a template for a research design paper. You can find templates online or can refer to published research papers in academic journals. The formats are standard so as long as you apply your words to a template that matches your design approach.

If you need more information or assistance learning about how to write a research design section, our customer support team can point you to more resources or put you in contact with one of our academic writing and editing experts. Each expert has earned either a bachelor’s or master’s degree and specialize in specific disciplines. You can rest assured that you will be assigned someone that knows your field inside and outside and can give you the writing research design and methodology help that you need to excel academically.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Comment * Error message

Name * Error message

Email * Error message

Save my name, email, and website in this browser for the next time I comment.

As Putin continues killing civilians, bombing kindergartens, and threatening WWIII, Ukraine fights for the world's peaceful future.

Ukraine Live Updates

Research Design 101: Research Methods for Students

Which of the many different types of research design is best for you?

One thing that you will want to consider early in your dissertation process is the design of your research study. By the time you start your dissertation or thesis, you have probably taken graduate and undergraduate courses about research methods; however, it has probably been a while since you have taken these courses, and you may need help sorting through all the different types of research design. Below is a brief refresher on different research designs and methodologies.

General Types of Research Designs

Descriptive: Researchers use descriptive research designs to describe particular phenomena or relationships within a single group sample. Descriptive designs are typically used as either pilot or preliminary studies and generally have rather basic statistical procedures. By nature, descriptive studies do not and cannot be used to explain causation.

Descriptive research designs usually provide researchers with information about a group or phenomenon about which there has been little research (e.g., mating patterns of Martians). However, descriptive studies lack randomization and control and cannot be used to determine causation and other implications; in other words, descriptive research designs can only be used to determine “who” and “what,” not “why.”

Quasi-Experimental: Researchers use quasi-experimental research designs to identify differences between two or more groups in an attempt to explain causation. What keeps these types of experiments from being true experiments is lack of randomization. For example, researchers cannot randomly assign gender to participants; therefore, any study in which researchers are investigating differences between genders is inherently quasi-experimental.

Quasi-experimental designs allow researchers more control to make assumptions about causation and implications of findings. Quasi-experimental designs are also useful when researchers want to study particular groups in which group members cannot be randomly assigned (e.g., persons with depression, single mothers, people from different races or ethnic groups, etc.). A major drawback to using quasi-experimental designs is that quasi-experimental research designs typically have less internal validity than do true experimental designs.

Experimental: Experimental research designs have the most control, and, thus, allow researchers to explain differences between groups. One of the key features of an experimental design is that participants are randomly assigned to groups. Experimental designs can be used to test differences between groups (e.g., treatment a group, treatment b group, and control group) or factorial differences within multiple levels of each group (e.g., a drug group [Xanax or Valium] and a psychotherapy group [Cognitive Behavioral Therapy or Rational Emotive Behavioral Therapy]).

True experimental research designs are understood to be the gold standard of research because experimental research designs are the best designs for researchers to predict causation. However, true experimental designs often require more resources than do other research designs and will not work with all research questions.

Specific Types of Research Designs

Single-Sample Repeated Measures: A design method in which the same group is tested at multiple points in time. Giving students an assessment of knowledge the first day of class and giving the same assessment on the last day of class is an example of a research design based on a single-sample repeated measures.

ABA: A specific single-sample repeated measures design in which participants are measured at baseline (A), after an intervention (B), and again after the intervention has been removed (A).

Between Groups: A design in which researchers compare the scores of two or more groups. Between-group designs can be used as either a single or repeated measure.

Matched Sample: A specific between-groups design in which researchers match participants across groups based on criteria determined by the researchers (e.g., age, IQ, gender, etc.). After matching participants based on the predetermined criteria, researchers examine differences between matched pairs (not between group means).

Browse More on PhDStudent

Everything You Need to Know About References and Citations: Part 1

When you conduct your research, it is important to record the details of all the information you find to provide accurate references, …

How to Write a Proposal: For a Master’s Thesis or Dissertation

Note: Many thanks to fellow PhDStudent blogger Ryan Krone for his contributions and insight to this post. Your thesis/dissertation proposal provides an …

How to Find Free Money for Graduate School Part 2

Getting into graduate school is already a challenge on its own, and funding the program once admitted is even harder. Graduate studies …

How to Find Free Money for Graduate School

You’ve finally earned your Bachelor’s degree and have made it into graduate school. Whether you already have massive student loans from undergrad …

Part 3 of How to Pick Your Defense Committee

  What strategies can a doctoral student employ to maneuver the trials and tribulations of a dissertation committee? In Part 2, we …

Best Dissertation Proofreading and Editing Tips to Make Your Work Spotless

You’ve heard this statement many times before: “the dissertation is the most important project you’ve ever worked on.” That may sound like …

Part 2 of How to Pick Your Defense Committee

Choosing a committee can be a daunting task for a doctoral student.  We’ve already covered two strategies that can help you through this …

Part 1 of How to Pick Your Defense Committee

So you’re ready to pick your committee members; there are a few things to keep in mind first—after all, it is a …

Intro To Series on How to Pick Your Defense Committee

Choosing the right defense committee can potentially be the difference between a smooth transition of receiving your doctoral degree or dodging bullets …

On Babies and Dissertations: Part 3

I recently had the experience of expecting my first baby a month before I graduated. Throughout the process, I accidentally learned several …

On Babies and Dissertations: Part 2

On Babies and Dissertations: Part 1

I recently had the experience of expecting my first baby a month before I graduated and accidentally learned tips on graduating on time with a …

Click here to cancel reply.

You must be logged in to post a comment.

Copyright © 2024 PhDStudent.com. All rights reserved. Designed by Divergent Web Solutions, LLC .

• Privacy Policy

Home » Thesis – Structure, Example and Writing Guide

Thesis – Structure, Example and Writing Guide

Table of contents.

Definition:

Thesis is a scholarly document that presents a student’s original research and findings on a particular topic or question. It is usually written as a requirement for a graduate degree program and is intended to demonstrate the student’s mastery of the subject matter and their ability to conduct independent research.

History of Thesis

The concept of a thesis can be traced back to ancient Greece, where it was used as a way for students to demonstrate their knowledge of a particular subject. However, the modern form of the thesis as a scholarly document used to earn a degree is a relatively recent development.

The origin of the modern thesis can be traced back to medieval universities in Europe. During this time, students were required to present a “disputation” in which they would defend a particular thesis in front of their peers and faculty members. These disputations served as a way to demonstrate the student’s mastery of the subject matter and were often the final requirement for earning a degree.

In the 17th century, the concept of the thesis was formalized further with the creation of the modern research university. Students were now required to complete a research project and present their findings in a written document, which would serve as the basis for their degree.

The modern thesis as we know it today has evolved over time, with different disciplines and institutions adopting their own standards and formats. However, the basic elements of a thesis – original research, a clear research question, a thorough review of the literature, and a well-argued conclusion – remain the same.

Structure of Thesis

The structure of a thesis may vary slightly depending on the specific requirements of the institution, department, or field of study, but generally, it follows a specific format.

Here’s a breakdown of the structure of a thesis:

This is the first page of the thesis that includes the title of the thesis, the name of the author, the name of the institution, the department, the date, and any other relevant information required by the institution.

This is a brief summary of the thesis that provides an overview of the research question, methodology, findings, and conclusions.

This page provides a list of all the chapters and sections in the thesis and their page numbers.

Introduction

This chapter provides an overview of the research question, the context of the research, and the purpose of the study. The introduction should also outline the methodology and the scope of the research.

Literature Review

This chapter provides a critical analysis of the relevant literature on the research topic. It should demonstrate the gap in the existing knowledge and justify the need for the research.

Methodology

This chapter provides a detailed description of the research methods used to gather and analyze data. It should explain the research design, the sampling method, data collection techniques, and data analysis procedures.

This chapter presents the findings of the research. It should include tables, graphs, and charts to illustrate the results.

This chapter interprets the results and relates them to the research question. It should explain the significance of the findings and their implications for the research topic.

This chapter summarizes the key findings and the main conclusions of the research. It should also provide recommendations for future research.

This section provides a list of all the sources cited in the thesis. The citation style may vary depending on the requirements of the institution or the field of study.

This section includes any additional material that supports the research, such as raw data, survey questionnaires, or other relevant documents.

How to write Thesis

Here are some steps to help you write a thesis:

• Choose a Topic: The first step in writing a thesis is to choose a topic that interests you and is relevant to your field of study. You should also consider the scope of the topic and the availability of resources for research.
• Develop a Research Question: Once you have chosen a topic, you need to develop a research question that you will answer in your thesis. The research question should be specific, clear, and feasible.
• Conduct a Literature Review: Before you start your research, you need to conduct a literature review to identify the existing knowledge and gaps in the field. This will help you refine your research question and develop a research methodology.
• Develop a Research Methodology: Once you have refined your research question, you need to develop a research methodology that includes the research design, data collection methods, and data analysis procedures.
• Collect and Analyze Data: After developing your research methodology, you need to collect and analyze data. This may involve conducting surveys, interviews, experiments, or analyzing existing data.
• Write the Thesis: Once you have analyzed the data, you need to write the thesis. The thesis should follow a specific structure that includes an introduction, literature review, methodology, results, discussion, conclusion, and references.
• Edit and Proofread: After completing the thesis, you need to edit and proofread it carefully. You should also have someone else review it to ensure that it is clear, concise, and free of errors.
• Submit the Thesis: Finally, you need to submit the thesis to your academic advisor or committee for review and evaluation.

Example of Thesis

Example of Thesis template for Students:

Title of Thesis

Table of Contents:

Chapter 1: Introduction

Chapter 2: Literature Review

Chapter 3: Research Methodology

Chapter 4: Results

Chapter 5: Discussion

Chapter 6: Conclusion

References:

Appendices:

Note: That’s just a basic template, but it should give you an idea of the structure and content that a typical thesis might include. Be sure to consult with your department or supervisor for any specific formatting requirements they may have. Good luck with your thesis!

Application of Thesis

Thesis is an important academic document that serves several purposes. Here are some of the applications of thesis:

• Academic Requirement: A thesis is a requirement for many academic programs, especially at the graduate level. It is an essential component of the evaluation process and demonstrates the student’s ability to conduct original research and contribute to the knowledge in their field.
• Career Advancement: A thesis can also help in career advancement. Employers often value candidates who have completed a thesis as it demonstrates their research skills, critical thinking abilities, and their dedication to their field of study.
• Publication : A thesis can serve as a basis for future publications in academic journals, books, or conference proceedings. It provides the researcher with an opportunity to present their research to a wider audience and contribute to the body of knowledge in their field.
• Personal Development: Writing a thesis is a challenging task that requires time, dedication, and perseverance. It provides the student with an opportunity to develop critical thinking, research, and writing skills that are essential for their personal and professional development.
• Impact on Society: The findings of a thesis can have an impact on society by addressing important issues, providing insights into complex problems, and contributing to the development of policies and practices.

Purpose of Thesis

The purpose of a thesis is to present original research findings in a clear and organized manner. It is a formal document that demonstrates a student’s ability to conduct independent research and contribute to the knowledge in their field of study. The primary purposes of a thesis are:

• To Contribute to Knowledge: The main purpose of a thesis is to contribute to the knowledge in a particular field of study. By conducting original research and presenting their findings, the student adds new insights and perspectives to the existing body of knowledge.
• To Demonstrate Research Skills: A thesis is an opportunity for the student to demonstrate their research skills. This includes the ability to formulate a research question, design a research methodology, collect and analyze data, and draw conclusions based on their findings.
• To Develop Critical Thinking: Writing a thesis requires critical thinking and analysis. The student must evaluate existing literature and identify gaps in the field, as well as develop and defend their own ideas.
• To Provide Evidence of Competence : A thesis provides evidence of the student’s competence in their field of study. It demonstrates their ability to apply theoretical concepts to real-world problems, and their ability to communicate their ideas effectively.
• To Facilitate Career Advancement : Completing a thesis can help the student advance their career by demonstrating their research skills and dedication to their field of study. It can also provide a basis for future publications, presentations, or research projects.

When to Write Thesis

The timing for writing a thesis depends on the specific requirements of the academic program or institution. In most cases, the opportunity to write a thesis is typically offered at the graduate level, but there may be exceptions.

Generally, students should plan to write their thesis during the final year of their graduate program. This allows sufficient time for conducting research, analyzing data, and writing the thesis. It is important to start planning the thesis early and to identify a research topic and research advisor as soon as possible.

In some cases, students may be able to write a thesis as part of an undergraduate program or as an independent research project outside of an academic program. In such cases, it is important to consult with faculty advisors or mentors to ensure that the research is appropriately designed and executed.

It is important to note that the process of writing a thesis can be time-consuming and requires a significant amount of effort and dedication. It is important to plan accordingly and to allocate sufficient time for conducting research, analyzing data, and writing the thesis.

Characteristics of Thesis

The characteristics of a thesis vary depending on the specific academic program or institution. However, some general characteristics of a thesis include:

• Originality : A thesis should present original research findings or insights. It should demonstrate the student’s ability to conduct independent research and contribute to the knowledge in their field of study.
• Clarity : A thesis should be clear and concise. It should present the research question, methodology, findings, and conclusions in a logical and organized manner. It should also be well-written, with proper grammar, spelling, and punctuation.
• Research-Based: A thesis should be based on rigorous research, which involves collecting and analyzing data from various sources. The research should be well-designed, with appropriate research methods and techniques.
• Evidence-Based : A thesis should be based on evidence, which means that all claims made in the thesis should be supported by data or literature. The evidence should be properly cited using appropriate citation styles.
• Critical Thinking: A thesis should demonstrate the student’s ability to critically analyze and evaluate information. It should present the student’s own ideas and arguments, and engage with existing literature in the field.
• Academic Style : A thesis should adhere to the conventions of academic writing. It should be well-structured, with clear headings and subheadings, and should use appropriate academic language.

Advantages of Thesis

There are several advantages to writing a thesis, including:

• Development of Research Skills: Writing a thesis requires extensive research and analytical skills. It helps to develop the student’s research skills, including the ability to formulate research questions, design and execute research methodologies, collect and analyze data, and draw conclusions based on their findings.
• Contribution to Knowledge: Writing a thesis provides an opportunity for the student to contribute to the knowledge in their field of study. By conducting original research, they can add new insights and perspectives to the existing body of knowledge.
• Preparation for Future Research: Completing a thesis prepares the student for future research projects. It provides them with the necessary skills to design and execute research methodologies, analyze data, and draw conclusions based on their findings.
• Career Advancement: Writing a thesis can help to advance the student’s career. It demonstrates their research skills and dedication to their field of study, and provides a basis for future publications, presentations, or research projects.
• Personal Growth: Completing a thesis can be a challenging and rewarding experience. It requires dedication, hard work, and perseverance. It can help the student to develop self-confidence, independence, and a sense of accomplishment.

Limitations of Thesis

There are also some limitations to writing a thesis, including:

• Time and Resources: Writing a thesis requires a significant amount of time and resources. It can be a time-consuming and expensive process, as it may involve conducting original research, analyzing data, and producing a lengthy document.
• Narrow Focus: A thesis is typically focused on a specific research question or topic, which may limit the student’s exposure to other areas within their field of study.
• Limited Audience: A thesis is usually only read by a small number of people, such as the student’s thesis advisor and committee members. This limits the potential impact of the research findings.
• Lack of Real-World Application : Some thesis topics may be highly theoretical or academic in nature, which may limit their practical application in the real world.
• Pressure and Stress : Writing a thesis can be a stressful and pressure-filled experience, as it may involve meeting strict deadlines, conducting original research, and producing a high-quality document.
• Potential for Isolation: Writing a thesis can be a solitary experience, as the student may spend a significant amount of time working independently on their research and writing.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Data Collection – Methods Types and Examples

Delimitations in Research – Types, Examples and...

Research Process – Steps, Examples and Tips

Research Design – Types, Methods and Examples

Institutional Review Board – Application Sample...

Evaluating Research – Process, Examples and...

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Methodology
• Descriptive Research Design | Definition, Methods & Examples

Descriptive Research Design | Definition, Methods & Examples

Published on 5 May 2022 by Shona McCombes . Revised on 10 October 2022.

Descriptive research aims to accurately and systematically describe a population, situation or phenomenon. It can answer what , where , when , and how   questions , but not why questions.

A descriptive research design can use a wide variety of research methods  to investigate one or more variables . Unlike in experimental research , the researcher does not control or manipulate any of the variables, but only observes and measures them.

Table of contents

When to use a descriptive research design, descriptive research methods.

Descriptive research is an appropriate choice when the research aim is to identify characteristics, frequencies, trends, and categories.

It is useful when not much is known yet about the topic or problem. Before you can research why something happens, you need to understand how, when, and where it happens.

• How has the London housing market changed over the past 20 years?
• Do customers of company X prefer product Y or product Z?
• What are the main genetic, behavioural, and morphological differences between European wildcats and domestic cats?
• What are the most popular online news sources among under-18s?
• How prevalent is disease A in population B?

Prevent plagiarism, run a free check.

Descriptive research is usually defined as a type of quantitative research , though qualitative research can also be used for descriptive purposes. The research design should be carefully developed to ensure that the results are valid and reliable .

Survey research allows you to gather large volumes of data that can be analysed for frequencies, averages, and patterns. Common uses of surveys include:

• Describing the demographics of a country or region
• Gauging public opinion on political and social topics
• Evaluating satisfaction with a company’s products or an organisation’s services

Observations

Observations allow you to gather data on behaviours and phenomena without having to rely on the honesty and accuracy of respondents. This method is often used by psychological, social, and market researchers to understand how people act in real-life situations.

Observation of physical entities and phenomena is also an important part of research in the natural sciences. Before you can develop testable hypotheses , models, or theories, it’s necessary to observe and systematically describe the subject under investigation.

Case studies

A case study can be used to describe the characteristics of a specific subject (such as a person, group, event, or organisation). Instead of gathering a large volume of data to identify patterns across time or location, case studies gather detailed data to identify the characteristics of a narrowly defined subject.

Rather than aiming to describe generalisable facts, case studies often focus on unusual or interesting cases that challenge assumptions, add complexity, or reveal something new about a research problem .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). Descriptive Research Design | Definition, Methods & Examples. Scribbr. Retrieved 29 April 2024, from https://www.scribbr.co.uk/research-methods/descriptive-research-design/

Is this article helpful?

Shona McCombes

Other students also liked, a quick guide to experimental design | 5 steps & examples, correlational research | guide, design & examples, qualitative vs quantitative research | examples & methods.