designs for research study

• En español – ExME
• Em português – EME

An introduction to different types of study design

Posted on 6th April 2021 by Hadi Abbas

Study designs are the set of methods and procedures used to collect and analyze data in a study.

Broadly speaking, there are 2 types of study designs: descriptive studies and analytical studies.

Descriptive studies

• Describes specific characteristics in a population of interest
• The most common forms are case reports and case series
• In a case report, we discuss our experience with the patient’s symptoms, signs, diagnosis, and treatment
• In a case series, several patients with similar experiences are grouped.

Analytical Studies

Analytical studies are of 2 types: observational and experimental.

Observational studies are studies that we conduct without any intervention or experiment. In those studies, we purely observe the outcomes.  On the other hand, in experimental studies, we conduct experiments and interventions.

Observational studies

Observational studies include many subtypes. Below, I will discuss the most common designs.

Cross-sectional study:

• This design is transverse where we take a specific sample at a specific time without any follow-up
• It allows us to calculate the frequency of disease ( p revalence ) or the frequency of a risk factor
• This design is easy to conduct
• For example – if we want to know the prevalence of migraine in a population, we can conduct a cross-sectional study whereby we take a sample from the population and calculate the number of patients with migraine headaches.

Cohort study:

• We conduct this study by comparing two samples from the population: one sample with a risk factor while the other lacks this risk factor
• It shows us the risk of developing the disease in individuals with the risk factor compared to those without the risk factor ( RR = relative risk )
• Prospective : we follow the individuals in the future to know who will develop the disease
• Retrospective : we look to the past to know who developed the disease (e.g. using medical records)
• This design is the strongest among the observational studies
• For example – to find out the relative risk of developing chronic obstructive pulmonary disease (COPD) among smokers, we take a sample including smokers and non-smokers. Then, we calculate the number of individuals with COPD among both.

Case-Control Study:

• We conduct this study by comparing 2 groups: one group with the disease (cases) and another group without the disease (controls)
• This design is always retrospective
•  We aim to find out the odds of having a risk factor or an exposure if an individual has a specific disease (Odds ratio)
•  Relatively easy to conduct
• For example – we want to study the odds of being a smoker among hypertensive patients compared to normotensive ones. To do so, we choose a group of patients diagnosed with hypertension and another group that serves as the control (normal blood pressure). Then we study their smoking history to find out if there is a correlation.

Experimental Studies

• Also known as interventional studies
• Can involve animals and humans
• Pre-clinical trials involve animals
• Clinical trials are experimental studies involving humans
• In clinical trials, we study the effect of an intervention compared to another intervention or placebo. As an example, I have listed the four phases of a drug trial:

I:  We aim to assess the safety of the drug ( is it safe ? )

II: We aim to assess the efficacy of the drug ( does it work ? )

III: We want to know if this drug is better than the old treatment ( is it better ? )

IV: We follow-up to detect long-term side effects ( can it stay in the market ? )

• In randomized controlled trials, one group of participants receives the control, while the other receives the tested drug/intervention. Those studies are the best way to evaluate the efficacy of a treatment.

Finally, the figure below will help you with your understanding of different types of study designs.

References (pdf)

You may also be interested in the following blogs for further reading:

An introduction to randomized controlled trials

Case-control and cohort studies: a brief overview

Cohort studies: prospective and retrospective designs

Prevalence vs Incidence: what is the difference?

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

No Comments on An introduction to different types of study design

you are amazing one!! if I get you I’m working with you! I’m student from Ethiopian higher education. health sciences student

Very informative and easy understandable

You are my kind of doctor. Do not lose sight of your objective.

Wow very erll explained and easy to understand

I’m Khamisu Habibu community health officer student from Abubakar Tafawa Balewa university teaching hospital Bauchi, Nigeria, I really appreciate your write up and you have make it clear for the learner. thank you

well understood,thank you so much

Well understood…thanks

Simply explained. Thank You.

Thanks a lot for this nice informative article which help me to understand different study designs that I felt difficult before

That’s lovely to hear, Mona, thank you for letting the author know how useful this was. If there are any other particular topics you think would be useful to you, and are not already on the website, please do let us know.

it is very informative and useful.

thank you statistician

Fabulous to hear, thank you John.

Thanks for this information

Thanks so much for this information….I have clearly known the types of study design Thanks

That’s so good to hear, Mirembe, thank you for letting the author know.

Very helpful article!! U have simplified everything for easy understanding

I’m a health science major currently taking statistics for health care workers…this is a challenging class…thanks for the simified feedback.

That’s good to hear this has helped you. Hopefully you will find some of the other blogs useful too. If you see any topics that are missing from the website, please do let us know!

Hello. I liked your presentation, the fact that you ranked them clearly is very helpful to understand for people like me who is a novelist researcher. However, I was expecting to read much more about the Experimental studies. So please direct me if you already have or will one day. Thank you

Dear Ay. My sincere apologies for not responding to your comment sooner. You may find it useful to filter the blogs by the topic of ‘Study design and research methods’ – here is a link to that filter: https://s4be.cochrane.org/blog/topic/study-design/ This will cover more detail about experimental studies. Or have a look on our library page for further resources there – you’ll find that on the ‘Resources’ drop down from the home page.

However, if there are specific things you feel you would like to learn about experimental studies, that are missing from the website, it would be great if you could let me know too. Thank you, and best of luck. Emma

Great job Mr Hadi. I advise you to prepare and study for the Australian Medical Board Exams as soon as you finish your undergrad study in Lebanon. Good luck and hope we can meet sometime in the future. Regards ;)

You have give a good explaination of what am looking for. However, references am not sure of where to get them from.

Subscribe to our newsletter

You will receive our monthly newsletter and free access to Trip Premium.

Related Articles

Cluster Randomized Trials: Concepts

This blog summarizes the concepts of cluster randomization, and the logistical and statistical considerations while designing a cluster randomized controlled trial.

Expertise-based Randomized Controlled Trials

This blog summarizes the concepts of Expertise-based randomized controlled trials with a focus on the advantages and challenges associated with this type of study.

A well-designed cohort study can provide powerful results. This blog introduces prospective and retrospective cohort studies, discussing the advantages, disadvantages and use of these type of study designs.

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• Types of Research Designs
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

Introduction

Before beginning your paper, you need to decide how you plan to design the study .

The research design refers to the overall strategy and analytical approach that you have chosen in order to integrate, in a coherent and logical way, the different components of the study, thus ensuring that the research problem will be thoroughly investigated. It constitutes the blueprint for the collection, measurement, and interpretation of information and data. Note that the research problem determines the type of design you choose, not the other way around!

De Vaus, D. A. Research Design in Social Research . London: SAGE, 2001; Trochim, William M.K. Research Methods Knowledge Base. 2006.

General Structure and Writing Style

The function of a research design is to ensure that the evidence obtained enables you to effectively address the research problem logically and as unambiguously as possible . In social sciences research, obtaining information relevant to the research problem generally entails specifying the type of evidence needed to test the underlying assumptions of a theory, to evaluate a program, or to accurately describe and assess meaning related to an observable phenomenon.

With this in mind, a common mistake made by researchers is that they begin their investigations before they have thought critically about what information is required to address the research problem. Without attending to these design issues beforehand, the overall research problem will not be adequately addressed and any conclusions drawn will run the risk of being weak and unconvincing. As a consequence, the overall validity of the study will be undermined.

The length and complexity of describing the research design in your paper can vary considerably, but any well-developed description will achieve the following :

• Identify the research problem clearly and justify its selection, particularly in relation to any valid alternative designs that could have been used,
• Review and synthesize previously published literature associated with the research problem,
• Clearly and explicitly specify hypotheses [i.e., research questions] central to the problem,
• Effectively describe the information and/or data which will be necessary for an adequate testing of the hypotheses and explain how such information and/or data will be obtained, and
• Describe the methods of analysis to be applied to the data in determining whether or not the hypotheses are true or false.

The research design is usually incorporated into the introduction of your paper . You can obtain an overall sense of what to do by reviewing studies that have utilized the same research design [e.g., using a case study approach]. This can help you develop an outline to follow for your own paper.

NOTE: Use the SAGE Research Methods Online and Cases and the SAGE Research Methods Videos databases to search for scholarly resources on how to apply specific research designs and methods . The Research Methods Online database contains links to more than 175,000 pages of SAGE publisher's book, journal, and reference content on quantitative, qualitative, and mixed research methodologies. Also included is a collection of case studies of social research projects that can be used to help you better understand abstract or complex methodological concepts. The Research Methods Videos database contains hours of tutorials, interviews, video case studies, and mini-documentaries covering the entire research process.

Creswell, John W. and J. David Creswell. Research Design: Qualitative, Quantitative, and Mixed Methods Approaches . 5th edition. Thousand Oaks, CA: Sage, 2018; De Vaus, D. A. Research Design in Social Research . London: SAGE, 2001; Gorard, Stephen. Research Design: Creating Robust Approaches for the Social Sciences . Thousand Oaks, CA: Sage, 2013; Leedy, Paul D. and Jeanne Ellis Ormrod. Practical Research: Planning and Design . Tenth edition. Boston, MA: Pearson, 2013; Vogt, W. Paul, Dianna C. Gardner, and Lynne M. Haeffele. When to Use What Research Design . New York: Guilford, 2012.

Action Research Design

Definition and Purpose

The essentials of action research design follow a characteristic cycle whereby initially an exploratory stance is adopted, where an understanding of a problem is developed and plans are made for some form of interventionary strategy. Then the intervention is carried out [the "action" in action research] during which time, pertinent observations are collected in various forms. The new interventional strategies are carried out, and this cyclic process repeats, continuing until a sufficient understanding of [or a valid implementation solution for] the problem is achieved. The protocol is iterative or cyclical in nature and is intended to foster deeper understanding of a given situation, starting with conceptualizing and particularizing the problem and moving through several interventions and evaluations.

What do these studies tell you ?

• This is a collaborative and adaptive research design that lends itself to use in work or community situations.
• Design focuses on pragmatic and solution-driven research outcomes rather than testing theories.
• When practitioners use action research, it has the potential to increase the amount they learn consciously from their experience; the action research cycle can be regarded as a learning cycle.
• Action research studies often have direct and obvious relevance to improving practice and advocating for change.
• There are no hidden controls or preemption of direction by the researcher.

What these studies don't tell you ?

• It is harder to do than conducting conventional research because the researcher takes on responsibilities of advocating for change as well as for researching the topic.
• Action research is much harder to write up because it is less likely that you can use a standard format to report your findings effectively [i.e., data is often in the form of stories or observation].
• Personal over-involvement of the researcher may bias research results.
• The cyclic nature of action research to achieve its twin outcomes of action [e.g. change] and research [e.g. understanding] is time-consuming and complex to conduct.
• Advocating for change usually requires buy-in from study participants.

Coghlan, David and Mary Brydon-Miller. The Sage Encyclopedia of Action Research . Thousand Oaks, CA:  Sage, 2014; Efron, Sara Efrat and Ruth Ravid. Action Research in Education: A Practical Guide . New York: Guilford, 2013; Gall, Meredith. Educational Research: An Introduction . Chapter 18, Action Research. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007; Gorard, Stephen. Research Design: Creating Robust Approaches for the Social Sciences . Thousand Oaks, CA: Sage, 2013; Kemmis, Stephen and Robin McTaggart. “Participatory Action Research.” In Handbook of Qualitative Research . Norman Denzin and Yvonna S. Lincoln, eds. 2nd ed. (Thousand Oaks, CA: SAGE, 2000), pp. 567-605; McNiff, Jean. Writing and Doing Action Research . London: Sage, 2014; Reason, Peter and Hilary Bradbury. Handbook of Action Research: Participative Inquiry and Practice . Thousand Oaks, CA: SAGE, 2001.

Case Study Design

A case study is an in-depth study of a particular research problem rather than a sweeping statistical survey or comprehensive comparative inquiry. It is often used to narrow down a very broad field of research into one or a few easily researchable examples. The case study research design is also useful for testing whether a specific theory and model actually applies to phenomena in the real world. It is a useful design when not much is known about an issue or phenomenon.

• Approach excels at bringing us to an understanding of a complex issue through detailed contextual analysis of a limited number of events or conditions and their relationships.
• A researcher using a case study design can apply a variety of methodologies and rely on a variety of sources to investigate a research problem.
• Design can extend experience or add strength to what is already known through previous research.
• Social scientists, in particular, make wide use of this research design to examine contemporary real-life situations and provide the basis for the application of concepts and theories and the extension of methodologies.
• The design can provide detailed descriptions of specific and rare cases.
• A single or small number of cases offers little basis for establishing reliability or to generalize the findings to a wider population of people, places, or things.
• Intense exposure to the study of a case may bias a researcher's interpretation of the findings.
• Design does not facilitate assessment of cause and effect relationships.
• Vital information may be missing, making the case hard to interpret.
• The case may not be representative or typical of the larger problem being investigated.
• If the criteria for selecting a case is because it represents a very unusual or unique phenomenon or problem for study, then your interpretation of the findings can only apply to that particular case.

Case Studies. Writing@CSU. Colorado State University; Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 4, Flexible Methods: Case Study Design. 2nd ed. New York: Columbia University Press, 1999; Gerring, John. “What Is a Case Study and What Is It Good for?” American Political Science Review 98 (May 2004): 341-354; Greenhalgh, Trisha, editor. Case Study Evaluation: Past, Present and Future Challenges . Bingley, UK: Emerald Group Publishing, 2015; Mills, Albert J. , Gabrielle Durepos, and Eiden Wiebe, editors. Encyclopedia of Case Study Research . Thousand Oaks, CA: SAGE Publications, 2010; Stake, Robert E. The Art of Case Study Research . Thousand Oaks, CA: SAGE, 1995; Yin, Robert K. Case Study Research: Design and Theory . Applied Social Research Methods Series, no. 5. 3rd ed. Thousand Oaks, CA: SAGE, 2003.

Causal Design

Causality studies may be thought of as understanding a phenomenon in terms of conditional statements in the form, “If X, then Y.” This type of research is used to measure what impact a specific change will have on existing norms and assumptions. Most social scientists seek causal explanations that reflect tests of hypotheses. Causal effect (nomothetic perspective) occurs when variation in one phenomenon, an independent variable, leads to or results, on average, in variation in another phenomenon, the dependent variable.

Conditions necessary for determining causality:

• Empirical association -- a valid conclusion is based on finding an association between the independent variable and the dependent variable.
• Appropriate time order -- to conclude that causation was involved, one must see that cases were exposed to variation in the independent variable before variation in the dependent variable.
• Nonspuriousness -- a relationship between two variables that is not due to variation in a third variable.
• Causality research designs assist researchers in understanding why the world works the way it does through the process of proving a causal link between variables and by the process of eliminating other possibilities.
• Replication is possible.
• There is greater confidence the study has internal validity due to the systematic subject selection and equity of groups being compared.
• Not all relationships are causal! The possibility always exists that, by sheer coincidence, two unrelated events appear to be related [e.g., Punxatawney Phil could accurately predict the duration of Winter for five consecutive years but, the fact remains, he's just a big, furry rodent].
• Conclusions about causal relationships are difficult to determine due to a variety of extraneous and confounding variables that exist in a social environment. This means causality can only be inferred, never proven.
• If two variables are correlated, the cause must come before the effect. However, even though two variables might be causally related, it can sometimes be difficult to determine which variable comes first and, therefore, to establish which variable is the actual cause and which is the  actual effect.

Beach, Derek and Rasmus Brun Pedersen. Causal Case Study Methods: Foundations and Guidelines for Comparing, Matching, and Tracing . Ann Arbor, MI: University of Michigan Press, 2016; Bachman, Ronet. The Practice of Research in Criminology and Criminal Justice . Chapter 5, Causation and Research Designs. 3rd ed. Thousand Oaks, CA: Pine Forge Press, 2007; Brewer, Ernest W. and Jennifer Kubn. “Causal-Comparative Design.” In Encyclopedia of Research Design . Neil J. Salkind, editor. (Thousand Oaks, CA: Sage, 2010), pp. 125-132; Causal Research Design: Experimentation. Anonymous SlideShare Presentation; Gall, Meredith. Educational Research: An Introduction . Chapter 11, Nonexperimental Research: Correlational Designs. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007; Trochim, William M.K. Research Methods Knowledge Base. 2006.

Cohort Design

Often used in the medical sciences, but also found in the applied social sciences, a cohort study generally refers to a study conducted over a period of time involving members of a population which the subject or representative member comes from, and who are united by some commonality or similarity. Using a quantitative framework, a cohort study makes note of statistical occurrence within a specialized subgroup, united by same or similar characteristics that are relevant to the research problem being investigated, rather than studying statistical occurrence within the general population. Using a qualitative framework, cohort studies generally gather data using methods of observation. Cohorts can be either "open" or "closed."

• Open Cohort Studies [dynamic populations, such as the population of Los Angeles] involve a population that is defined just by the state of being a part of the study in question (and being monitored for the outcome). Date of entry and exit from the study is individually defined, therefore, the size of the study population is not constant. In open cohort studies, researchers can only calculate rate based data, such as, incidence rates and variants thereof.
• Closed Cohort Studies [static populations, such as patients entered into a clinical trial] involve participants who enter into the study at one defining point in time and where it is presumed that no new participants can enter the cohort. Given this, the number of study participants remains constant (or can only decrease).
• The use of cohorts is often mandatory because a randomized control study may be unethical. For example, you cannot deliberately expose people to asbestos, you can only study its effects on those who have already been exposed. Research that measures risk factors often relies upon cohort designs.
• Because cohort studies measure potential causes before the outcome has occurred, they can demonstrate that these “causes” preceded the outcome, thereby avoiding the debate as to which is the cause and which is the effect.
• Cohort analysis is highly flexible and can provide insight into effects over time and related to a variety of different types of changes [e.g., social, cultural, political, economic, etc.].
• Either original data or secondary data can be used in this design.
• In cases where a comparative analysis of two cohorts is made [e.g., studying the effects of one group exposed to asbestos and one that has not], a researcher cannot control for all other factors that might differ between the two groups. These factors are known as confounding variables.
• Cohort studies can end up taking a long time to complete if the researcher must wait for the conditions of interest to develop within the group. This also increases the chance that key variables change during the course of the study, potentially impacting the validity of the findings.
• Due to the lack of randominization in the cohort design, its external validity is lower than that of study designs where the researcher randomly assigns participants.

Healy P, Devane D. “Methodological Considerations in Cohort Study Designs.” Nurse Researcher 18 (2011): 32-36; Glenn, Norval D, editor. Cohort Analysis . 2nd edition. Thousand Oaks, CA: Sage, 2005; Levin, Kate Ann. Study Design IV: Cohort Studies. Evidence-Based Dentistry 7 (2003): 51–52; Payne, Geoff. “Cohort Study.” In The SAGE Dictionary of Social Research Methods . Victor Jupp, editor. (Thousand Oaks, CA: Sage, 2006), pp. 31-33; Study Design 101. Himmelfarb Health Sciences Library. George Washington University, November 2011; Cohort Study. Wikipedia.

Cross-Sectional Design

Cross-sectional research designs have three distinctive features: no time dimension; a reliance on existing differences rather than change following intervention; and, groups are selected based on existing differences rather than random allocation. The cross-sectional design can only measure differences between or from among a variety of people, subjects, or phenomena rather than a process of change. As such, researchers using this design can only employ a relatively passive approach to making causal inferences based on findings.

• Cross-sectional studies provide a clear 'snapshot' of the outcome and the characteristics associated with it, at a specific point in time.
• Unlike an experimental design, where there is an active intervention by the researcher to produce and measure change or to create differences, cross-sectional designs focus on studying and drawing inferences from existing differences between people, subjects, or phenomena.
• Entails collecting data at and concerning one point in time. While longitudinal studies involve taking multiple measures over an extended period of time, cross-sectional research is focused on finding relationships between variables at one moment in time.
• Groups identified for study are purposely selected based upon existing differences in the sample rather than seeking random sampling.
• Cross-section studies are capable of using data from a large number of subjects and, unlike observational studies, is not geographically bound.
• Can estimate prevalence of an outcome of interest because the sample is usually taken from the whole population.
• Because cross-sectional designs generally use survey techniques to gather data, they are relatively inexpensive and take up little time to conduct.
• Finding people, subjects, or phenomena to study that are very similar except in one specific variable can be difficult.
• Results are static and time bound and, therefore, give no indication of a sequence of events or reveal historical or temporal contexts.
• Studies cannot be utilized to establish cause and effect relationships.
• This design only provides a snapshot of analysis so there is always the possibility that a study could have differing results if another time-frame had been chosen.
• There is no follow up to the findings.

Bethlehem, Jelke. "7: Cross-sectional Research." In Research Methodology in the Social, Behavioural and Life Sciences . Herman J Adèr and Gideon J Mellenbergh, editors. (London, England: Sage, 1999), pp. 110-43; Bourque, Linda B. “Cross-Sectional Design.” In  The SAGE Encyclopedia of Social Science Research Methods . Michael S. Lewis-Beck, Alan Bryman, and Tim Futing Liao. (Thousand Oaks, CA: 2004), pp. 230-231; Hall, John. “Cross-Sectional Survey Design.” In Encyclopedia of Survey Research Methods . Paul J. Lavrakas, ed. (Thousand Oaks, CA: Sage, 2008), pp. 173-174; Helen Barratt, Maria Kirwan. Cross-Sectional Studies: Design Application, Strengths and Weaknesses of Cross-Sectional Studies. Healthknowledge, 2009. Cross-Sectional Study. Wikipedia.

Descriptive Design

Descriptive research designs help provide answers to the questions of who, what, when, where, and how associated with a particular research problem; a descriptive study cannot conclusively ascertain answers to why. Descriptive research is used to obtain information concerning the current status of the phenomena and to describe "what exists" with respect to variables or conditions in a situation.

• The subject is being observed in a completely natural and unchanged natural environment. True experiments, whilst giving analyzable data, often adversely influence the normal behavior of the subject [a.k.a., the Heisenberg effect whereby measurements of certain systems cannot be made without affecting the systems].
• Descriptive research is often used as a pre-cursor to more quantitative research designs with the general overview giving some valuable pointers as to what variables are worth testing quantitatively.
• If the limitations are understood, they can be a useful tool in developing a more focused study.
• Descriptive studies can yield rich data that lead to important recommendations in practice.
• Appoach collects a large amount of data for detailed analysis.
• The results from a descriptive research cannot be used to discover a definitive answer or to disprove a hypothesis.
• Because descriptive designs often utilize observational methods [as opposed to quantitative methods], the results cannot be replicated.
• The descriptive function of research is heavily dependent on instrumentation for measurement and observation.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 5, Flexible Methods: Descriptive Research. 2nd ed. New York: Columbia University Press, 1999; Given, Lisa M. "Descriptive Research." In Encyclopedia of Measurement and Statistics . Neil J. Salkind and Kristin Rasmussen, editors. (Thousand Oaks, CA: Sage, 2007), pp. 251-254; McNabb, Connie. Descriptive Research Methodologies. Powerpoint Presentation; Shuttleworth, Martyn. Descriptive Research Design, September 26, 2008; Erickson, G. Scott. "Descriptive Research Design." In New Methods of Market Research and Analysis . (Northampton, MA: Edward Elgar Publishing, 2017), pp. 51-77; Sahin, Sagufta, and Jayanta Mete. "A Brief Study on Descriptive Research: Its Nature and Application in Social Science." International Journal of Research and Analysis in Humanities 1 (2021): 11; K. Swatzell and P. Jennings. “Descriptive Research: The Nuts and Bolts.” Journal of the American Academy of Physician Assistants 20 (2007), pp. 55-56; Kane, E. Doing Your Own Research: Basic Descriptive Research in the Social Sciences and Humanities . London: Marion Boyars, 1985.

Experimental Design

A blueprint of the procedure that enables the researcher to maintain control over all factors that may affect the result of an experiment. In doing this, the researcher attempts to determine or predict what may occur. Experimental research is often used where there is time priority in a causal relationship (cause precedes effect), there is consistency in a causal relationship (a cause will always lead to the same effect), and the magnitude of the correlation is great. The classic experimental design specifies an experimental group and a control group. The independent variable is administered to the experimental group and not to the control group, and both groups are measured on the same dependent variable. Subsequent experimental designs have used more groups and more measurements over longer periods. True experiments must have control, randomization, and manipulation.

• Experimental research allows the researcher to control the situation. In so doing, it allows researchers to answer the question, “What causes something to occur?”
• Permits the researcher to identify cause and effect relationships between variables and to distinguish placebo effects from treatment effects.
• Experimental research designs support the ability to limit alternative explanations and to infer direct causal relationships in the study.
• Approach provides the highest level of evidence for single studies.
• The design is artificial, and results may not generalize well to the real world.
• The artificial settings of experiments may alter the behaviors or responses of participants.
• Experimental designs can be costly if special equipment or facilities are needed.
• Some research problems cannot be studied using an experiment because of ethical or technical reasons.
• Difficult to apply ethnographic and other qualitative methods to experimentally designed studies.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 7, Flexible Methods: Experimental Research. 2nd ed. New York: Columbia University Press, 1999; Chapter 2: Research Design, Experimental Designs. School of Psychology, University of New England, 2000; Chow, Siu L. "Experimental Design." In Encyclopedia of Research Design . Neil J. Salkind, editor. (Thousand Oaks, CA: Sage, 2010), pp. 448-453; "Experimental Design." In Social Research Methods . Nicholas Walliman, editor. (London, England: Sage, 2006), pp, 101-110; Experimental Research. Research Methods by Dummies. Department of Psychology. California State University, Fresno, 2006; Kirk, Roger E. Experimental Design: Procedures for the Behavioral Sciences . 4th edition. Thousand Oaks, CA: Sage, 2013; Trochim, William M.K. Experimental Design. Research Methods Knowledge Base. 2006; Rasool, Shafqat. Experimental Research. Slideshare presentation.

Exploratory Design

An exploratory design is conducted about a research problem when there are few or no earlier studies to refer to or rely upon to predict an outcome . The focus is on gaining insights and familiarity for later investigation or undertaken when research problems are in a preliminary stage of investigation. Exploratory designs are often used to establish an understanding of how best to proceed in studying an issue or what methodology would effectively apply to gathering information about the issue.

The goals of exploratory research are intended to produce the following possible insights:

• Familiarity with basic details, settings, and concerns.
• Well grounded picture of the situation being developed.
• Generation of new ideas and assumptions.
• Development of tentative theories or hypotheses.
• Determination about whether a study is feasible in the future.
• Issues get refined for more systematic investigation and formulation of new research questions.
• Direction for future research and techniques get developed.
• Design is a useful approach for gaining background information on a particular topic.
• Exploratory research is flexible and can address research questions of all types (what, why, how).
• Provides an opportunity to define new terms and clarify existing concepts.
• Exploratory research is often used to generate formal hypotheses and develop more precise research problems.
• In the policy arena or applied to practice, exploratory studies help establish research priorities and where resources should be allocated.
• Exploratory research generally utilizes small sample sizes and, thus, findings are typically not generalizable to the population at large.
• The exploratory nature of the research inhibits an ability to make definitive conclusions about the findings. They provide insight but not definitive conclusions.
• The research process underpinning exploratory studies is flexible but often unstructured, leading to only tentative results that have limited value to decision-makers.
• Design lacks rigorous standards applied to methods of data gathering and analysis because one of the areas for exploration could be to determine what method or methodologies could best fit the research problem.

Cuthill, Michael. “Exploratory Research: Citizen Participation, Local Government, and Sustainable Development in Australia.” Sustainable Development 10 (2002): 79-89; Streb, Christoph K. "Exploratory Case Study." In Encyclopedia of Case Study Research . Albert J. Mills, Gabrielle Durepos and Eiden Wiebe, editors. (Thousand Oaks, CA: Sage, 2010), pp. 372-374; Taylor, P. J., G. Catalano, and D.R.F. Walker. “Exploratory Analysis of the World City Network.” Urban Studies 39 (December 2002): 2377-2394; Exploratory Research. Wikipedia.

Field Research Design

Sometimes referred to as ethnography or participant observation, designs around field research encompass a variety of interpretative procedures [e.g., observation and interviews] rooted in qualitative approaches to studying people individually or in groups while inhabiting their natural environment as opposed to using survey instruments or other forms of impersonal methods of data gathering. Information acquired from observational research takes the form of “ field notes ” that involves documenting what the researcher actually sees and hears while in the field. Findings do not consist of conclusive statements derived from numbers and statistics because field research involves analysis of words and observations of behavior. Conclusions, therefore, are developed from an interpretation of findings that reveal overriding themes, concepts, and ideas. More information can be found HERE .

• Field research is often necessary to fill gaps in understanding the research problem applied to local conditions or to specific groups of people that cannot be ascertained from existing data.
• The research helps contextualize already known information about a research problem, thereby facilitating ways to assess the origins, scope, and scale of a problem and to gage the causes, consequences, and means to resolve an issue based on deliberate interaction with people in their natural inhabited spaces.
• Enables the researcher to corroborate or confirm data by gathering additional information that supports or refutes findings reported in prior studies of the topic.
• Because the researcher in embedded in the field, they are better able to make observations or ask questions that reflect the specific cultural context of the setting being investigated.
• Observing the local reality offers the opportunity to gain new perspectives or obtain unique data that challenges existing theoretical propositions or long-standing assumptions found in the literature.

What these studies don't tell you

• A field research study requires extensive time and resources to carry out the multiple steps involved with preparing for the gathering of information, including for example, examining background information about the study site, obtaining permission to access the study site, and building trust and rapport with subjects.
• Requires a commitment to staying engaged in the field to ensure that you can adequately document events and behaviors as they unfold.
• The unpredictable nature of fieldwork means that researchers can never fully control the process of data gathering. They must maintain a flexible approach to studying the setting because events and circumstances can change quickly or unexpectedly.
• Findings can be difficult to interpret and verify without access to documents and other source materials that help to enhance the credibility of information obtained from the field  [i.e., the act of triangulating the data].
• Linking the research problem to the selection of study participants inhabiting their natural environment is critical. However, this specificity limits the ability to generalize findings to different situations or in other contexts or to infer courses of action applied to other settings or groups of people.
• The reporting of findings must take into account how the researcher themselves may have inadvertently affected respondents and their behaviors.

Historical Design

The purpose of a historical research design is to collect, verify, and synthesize evidence from the past to establish facts that defend or refute a hypothesis. It uses secondary sources and a variety of primary documentary evidence, such as, diaries, official records, reports, archives, and non-textual information [maps, pictures, audio and visual recordings]. The limitation is that the sources must be both authentic and valid.

• The historical research design is unobtrusive; the act of research does not affect the results of the study.
• The historical approach is well suited for trend analysis.
• Historical records can add important contextual background required to more fully understand and interpret a research problem.
• There is often no possibility of researcher-subject interaction that could affect the findings.
• Historical sources can be used over and over to study different research problems or to replicate a previous study.
• The ability to fulfill the aims of your research are directly related to the amount and quality of documentation available to understand the research problem.
• Since historical research relies on data from the past, there is no way to manipulate it to control for contemporary contexts.
• Interpreting historical sources can be very time consuming.
• The sources of historical materials must be archived consistently to ensure access. This may especially challenging for digital or online-only sources.
• Original authors bring their own perspectives and biases to the interpretation of past events and these biases are more difficult to ascertain in historical resources.
• Due to the lack of control over external variables, historical research is very weak with regard to the demands of internal validity.
• It is rare that the entirety of historical documentation needed to fully address a research problem is available for interpretation, therefore, gaps need to be acknowledged.

Howell, Martha C. and Walter Prevenier. From Reliable Sources: An Introduction to Historical Methods . Ithaca, NY: Cornell University Press, 2001; Lundy, Karen Saucier. "Historical Research." In The Sage Encyclopedia of Qualitative Research Methods . Lisa M. Given, editor. (Thousand Oaks, CA: Sage, 2008), pp. 396-400; Marius, Richard. and Melvin E. Page. A Short Guide to Writing about History . 9th edition. Boston, MA: Pearson, 2015; Savitt, Ronald. “Historical Research in Marketing.” Journal of Marketing 44 (Autumn, 1980): 52-58;  Gall, Meredith. Educational Research: An Introduction . Chapter 16, Historical Research. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007.

Longitudinal Design

A longitudinal study follows the same sample over time and makes repeated observations. For example, with longitudinal surveys, the same group of people is interviewed at regular intervals, enabling researchers to track changes over time and to relate them to variables that might explain why the changes occur. Longitudinal research designs describe patterns of change and help establish the direction and magnitude of causal relationships. Measurements are taken on each variable over two or more distinct time periods. This allows the researcher to measure change in variables over time. It is a type of observational study sometimes referred to as a panel study.

• Longitudinal data facilitate the analysis of the duration of a particular phenomenon.
• Enables survey researchers to get close to the kinds of causal explanations usually attainable only with experiments.
• The design permits the measurement of differences or change in a variable from one period to another [i.e., the description of patterns of change over time].
• Longitudinal studies facilitate the prediction of future outcomes based upon earlier factors.
• The data collection method may change over time.
• Maintaining the integrity of the original sample can be difficult over an extended period of time.
• It can be difficult to show more than one variable at a time.
• This design often needs qualitative research data to explain fluctuations in the results.
• A longitudinal research design assumes present trends will continue unchanged.
• It can take a long period of time to gather results.
• There is a need to have a large sample size and accurate sampling to reach representativness.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 6, Flexible Methods: Relational and Longitudinal Research. 2nd ed. New York: Columbia University Press, 1999; Forgues, Bernard, and Isabelle Vandangeon-Derumez. "Longitudinal Analyses." In Doing Management Research . Raymond-Alain Thiétart and Samantha Wauchope, editors. (London, England: Sage, 2001), pp. 332-351; Kalaian, Sema A. and Rafa M. Kasim. "Longitudinal Studies." In Encyclopedia of Survey Research Methods . Paul J. Lavrakas, ed. (Thousand Oaks, CA: Sage, 2008), pp. 440-441; Menard, Scott, editor. Longitudinal Research . Thousand Oaks, CA: Sage, 2002; Ployhart, Robert E. and Robert J. Vandenberg. "Longitudinal Research: The Theory, Design, and Analysis of Change.” Journal of Management 36 (January 2010): 94-120; Longitudinal Study. Wikipedia.

Meta-Analysis Design

Meta-analysis is an analytical methodology designed to systematically evaluate and summarize the results from a number of individual studies, thereby, increasing the overall sample size and the ability of the researcher to study effects of interest. The purpose is to not simply summarize existing knowledge, but to develop a new understanding of a research problem using synoptic reasoning. The main objectives of meta-analysis include analyzing differences in the results among studies and increasing the precision by which effects are estimated. A well-designed meta-analysis depends upon strict adherence to the criteria used for selecting studies and the availability of information in each study to properly analyze their findings. Lack of information can severely limit the type of analyzes and conclusions that can be reached. In addition, the more dissimilarity there is in the results among individual studies [heterogeneity], the more difficult it is to justify interpretations that govern a valid synopsis of results. A meta-analysis needs to fulfill the following requirements to ensure the validity of your findings:

• Clearly defined description of objectives, including precise definitions of the variables and outcomes that are being evaluated;
• A well-reasoned and well-documented justification for identification and selection of the studies;
• Assessment and explicit acknowledgment of any researcher bias in the identification and selection of those studies;
• Description and evaluation of the degree of heterogeneity among the sample size of studies reviewed; and,
• Justification of the techniques used to evaluate the studies.
• Can be an effective strategy for determining gaps in the literature.
• Provides a means of reviewing research published about a particular topic over an extended period of time and from a variety of sources.
• Is useful in clarifying what policy or programmatic actions can be justified on the basis of analyzing research results from multiple studies.
• Provides a method for overcoming small sample sizes in individual studies that previously may have had little relationship to each other.
• Can be used to generate new hypotheses or highlight research problems for future studies.
• Small violations in defining the criteria used for content analysis can lead to difficult to interpret and/or meaningless findings.
• A large sample size can yield reliable, but not necessarily valid, results.
• A lack of uniformity regarding, for example, the type of literature reviewed, how methods are applied, and how findings are measured within the sample of studies you are analyzing, can make the process of synthesis difficult to perform.
• Depending on the sample size, the process of reviewing and synthesizing multiple studies can be very time consuming.

Beck, Lewis W. "The Synoptic Method." The Journal of Philosophy 36 (1939): 337-345; Cooper, Harris, Larry V. Hedges, and Jeffrey C. Valentine, eds. The Handbook of Research Synthesis and Meta-Analysis . 2nd edition. New York: Russell Sage Foundation, 2009; Guzzo, Richard A., Susan E. Jackson and Raymond A. Katzell. “Meta-Analysis Analysis.” In Research in Organizational Behavior , Volume 9. (Greenwich, CT: JAI Press, 1987), pp 407-442; Lipsey, Mark W. and David B. Wilson. Practical Meta-Analysis . Thousand Oaks, CA: Sage Publications, 2001; Study Design 101. Meta-Analysis. The Himmelfarb Health Sciences Library, George Washington University; Timulak, Ladislav. “Qualitative Meta-Analysis.” In The SAGE Handbook of Qualitative Data Analysis . Uwe Flick, editor. (Los Angeles, CA: Sage, 2013), pp. 481-495; Walker, Esteban, Adrian V. Hernandez, and Micheal W. Kattan. "Meta-Analysis: It's Strengths and Limitations." Cleveland Clinic Journal of Medicine 75 (June 2008): 431-439.

Mixed-Method Design

• Narrative and non-textual information can add meaning to numeric data, while numeric data can add precision to narrative and non-textual information.
• Can utilize existing data while at the same time generating and testing a grounded theory approach to describe and explain the phenomenon under study.
• A broader, more complex research problem can be investigated because the researcher is not constrained by using only one method.
• The strengths of one method can be used to overcome the inherent weaknesses of another method.
• Can provide stronger, more robust evidence to support a conclusion or set of recommendations.
• May generate new knowledge new insights or uncover hidden insights, patterns, or relationships that a single methodological approach might not reveal.
• Produces more complete knowledge and understanding of the research problem that can be used to increase the generalizability of findings applied to theory or practice.
• A researcher must be proficient in understanding how to apply multiple methods to investigating a research problem as well as be proficient in optimizing how to design a study that coherently melds them together.
• Can increase the likelihood of conflicting results or ambiguous findings that inhibit drawing a valid conclusion or setting forth a recommended course of action [e.g., sample interview responses do not support existing statistical data].
• Because the research design can be very complex, reporting the findings requires a well-organized narrative, clear writing style, and precise word choice.
• Design invites collaboration among experts. However, merging different investigative approaches and writing styles requires more attention to the overall research process than studies conducted using only one methodological paradigm.
• Concurrent merging of quantitative and qualitative research requires greater attention to having adequate sample sizes, using comparable samples, and applying a consistent unit of analysis. For sequential designs where one phase of qualitative research builds on the quantitative phase or vice versa, decisions about what results from the first phase to use in the next phase, the choice of samples and estimating reasonable sample sizes for both phases, and the interpretation of results from both phases can be difficult.
• Due to multiple forms of data being collected and analyzed, this design requires extensive time and resources to carry out the multiple steps involved in data gathering and interpretation.

Burch, Patricia and Carolyn J. Heinrich. Mixed Methods for Policy Research and Program Evaluation . Thousand Oaks, CA: Sage, 2016; Creswell, John w. et al. Best Practices for Mixed Methods Research in the Health Sciences . Bethesda, MD: Office of Behavioral and Social Sciences Research, National Institutes of Health, 2010Creswell, John W. Research Design: Qualitative, Quantitative, and Mixed Methods Approaches . 4th edition. Thousand Oaks, CA: Sage Publications, 2014; Domínguez, Silvia, editor. Mixed Methods Social Networks Research . Cambridge, UK: Cambridge University Press, 2014; Hesse-Biber, Sharlene Nagy. Mixed Methods Research: Merging Theory with Practice . New York: Guilford Press, 2010; Niglas, Katrin. “How the Novice Researcher Can Make Sense of Mixed Methods Designs.” International Journal of Multiple Research Approaches 3 (2009): 34-46; Onwuegbuzie, Anthony J. and Nancy L. Leech. “Linking Research Questions to Mixed Methods Data Analysis Procedures.” The Qualitative Report 11 (September 2006): 474-498; Tashakorri, Abbas and John W. Creswell. “The New Era of Mixed Methods.” Journal of Mixed Methods Research 1 (January 2007): 3-7; Zhanga, Wanqing. “Mixed Methods Application in Health Intervention Research: A Multiple Case Study.” International Journal of Multiple Research Approaches 8 (2014): 24-35 .

Observational Design

This type of research design draws a conclusion by comparing subjects against a control group, in cases where the researcher has no control over the experiment. There are two general types of observational designs. In direct observations, people know that you are watching them. Unobtrusive measures involve any method for studying behavior where individuals do not know they are being observed. An observational study allows a useful insight into a phenomenon and avoids the ethical and practical difficulties of setting up a large and cumbersome research project.

• Observational studies are usually flexible and do not necessarily need to be structured around a hypothesis about what you expect to observe [data is emergent rather than pre-existing].
• The researcher is able to collect in-depth information about a particular behavior.
• Can reveal interrelationships among multifaceted dimensions of group interactions.
• You can generalize your results to real life situations.
• Observational research is useful for discovering what variables may be important before applying other methods like experiments.
• Observation research designs account for the complexity of group behaviors.
• Reliability of data is low because seeing behaviors occur over and over again may be a time consuming task and are difficult to replicate.
• In observational research, findings may only reflect a unique sample population and, thus, cannot be generalized to other groups.
• There can be problems with bias as the researcher may only "see what they want to see."
• There is no possibility to determine "cause and effect" relationships since nothing is manipulated.
• Sources or subjects may not all be equally credible.
• Any group that is knowingly studied is altered to some degree by the presence of the researcher, therefore, potentially skewing any data collected.

Atkinson, Paul and Martyn Hammersley. “Ethnography and Participant Observation.” In Handbook of Qualitative Research . Norman K. Denzin and Yvonna S. Lincoln, eds. (Thousand Oaks, CA: Sage, 1994), pp. 248-261; Observational Research. Research Methods by Dummies. Department of Psychology. California State University, Fresno, 2006; Patton Michael Quinn. Qualitiative Research and Evaluation Methods . Chapter 6, Fieldwork Strategies and Observational Methods. 3rd ed. Thousand Oaks, CA: Sage, 2002; Payne, Geoff and Judy Payne. "Observation." In Key Concepts in Social Research . The SAGE Key Concepts series. (London, England: Sage, 2004), pp. 158-162; Rosenbaum, Paul R. Design of Observational Studies . New York: Springer, 2010;Williams, J. Patrick. "Nonparticipant Observation." In The Sage Encyclopedia of Qualitative Research Methods . Lisa M. Given, editor.(Thousand Oaks, CA: Sage, 2008), pp. 562-563.

Philosophical Design

Understood more as an broad approach to examining a research problem than a methodological design, philosophical analysis and argumentation is intended to challenge deeply embedded, often intractable, assumptions underpinning an area of study. This approach uses the tools of argumentation derived from philosophical traditions, concepts, models, and theories to critically explore and challenge, for example, the relevance of logic and evidence in academic debates, to analyze arguments about fundamental issues, or to discuss the root of existing discourse about a research problem. These overarching tools of analysis can be framed in three ways:

• Ontology -- the study that describes the nature of reality; for example, what is real and what is not, what is fundamental and what is derivative?
• Epistemology -- the study that explores the nature of knowledge; for example, by what means does knowledge and understanding depend upon and how can we be certain of what we know?
• Axiology -- the study of values; for example, what values does an individual or group hold and why? How are values related to interest, desire, will, experience, and means-to-end? And, what is the difference between a matter of fact and a matter of value?
• Can provide a basis for applying ethical decision-making to practice.
• Functions as a means of gaining greater self-understanding and self-knowledge about the purposes of research.
• Brings clarity to general guiding practices and principles of an individual or group.
• Philosophy informs methodology.
• Refine concepts and theories that are invoked in relatively unreflective modes of thought and discourse.
• Beyond methodology, philosophy also informs critical thinking about epistemology and the structure of reality (metaphysics).
• Offers clarity and definition to the practical and theoretical uses of terms, concepts, and ideas.
• Limited application to specific research problems [answering the "So What?" question in social science research].
• Analysis can be abstract, argumentative, and limited in its practical application to real-life issues.
• While a philosophical analysis may render problematic that which was once simple or taken-for-granted, the writing can be dense and subject to unnecessary jargon, overstatement, and/or excessive quotation and documentation.
• There are limitations in the use of metaphor as a vehicle of philosophical analysis.
• There can be analytical difficulties in moving from philosophy to advocacy and between abstract thought and application to the phenomenal world.

Burton, Dawn. "Part I, Philosophy of the Social Sciences." In Research Training for Social Scientists . (London, England: Sage, 2000), pp. 1-5; Chapter 4, Research Methodology and Design. Unisa Institutional Repository (UnisaIR), University of South Africa; Jarvie, Ian C., and Jesús Zamora-Bonilla, editors. The SAGE Handbook of the Philosophy of Social Sciences . London: Sage, 2011; Labaree, Robert V. and Ross Scimeca. “The Philosophical Problem of Truth in Librarianship.” The Library Quarterly 78 (January 2008): 43-70; Maykut, Pamela S. Beginning Qualitative Research: A Philosophic and Practical Guide . Washington, DC: Falmer Press, 1994; McLaughlin, Hugh. "The Philosophy of Social Research." In Understanding Social Work Research . 2nd edition. (London: SAGE Publications Ltd., 2012), pp. 24-47; Stanford Encyclopedia of Philosophy . Metaphysics Research Lab, CSLI, Stanford University, 2013.

Sequential Design

• The researcher has a limitless option when it comes to sample size and the sampling schedule.
• Due to the repetitive nature of this research design, minor changes and adjustments can be done during the initial parts of the study to correct and hone the research method.
• This is a useful design for exploratory studies.
• There is very little effort on the part of the researcher when performing this technique. It is generally not expensive, time consuming, or workforce intensive.
• Because the study is conducted serially, the results of one sample are known before the next sample is taken and analyzed. This provides opportunities for continuous improvement of sampling and methods of analysis.
• The sampling method is not representative of the entire population. The only possibility of approaching representativeness is when the researcher chooses to use a very large sample size significant enough to represent a significant portion of the entire population. In this case, moving on to study a second or more specific sample can be difficult.
• The design cannot be used to create conclusions and interpretations that pertain to an entire population because the sampling technique is not randomized. Generalizability from findings is, therefore, limited.
• Difficult to account for and interpret variation from one sample to another over time, particularly when using qualitative methods of data collection.

Betensky, Rebecca. Harvard University, Course Lecture Note slides; Bovaird, James A. and Kevin A. Kupzyk. "Sequential Design." In Encyclopedia of Research Design . Neil J. Salkind, editor. (Thousand Oaks, CA: Sage, 2010), pp. 1347-1352; Cresswell, John W. Et al. “Advanced Mixed-Methods Research Designs.” In Handbook of Mixed Methods in Social and Behavioral Research . Abbas Tashakkori and Charles Teddle, eds. (Thousand Oaks, CA: Sage, 2003), pp. 209-240; Henry, Gary T. "Sequential Sampling." In The SAGE Encyclopedia of Social Science Research Methods . Michael S. Lewis-Beck, Alan Bryman and Tim Futing Liao, editors. (Thousand Oaks, CA: Sage, 2004), pp. 1027-1028; Nataliya V. Ivankova. “Using Mixed-Methods Sequential Explanatory Design: From Theory to Practice.” Field Methods 18 (February 2006): 3-20; Bovaird, James A. and Kevin A. Kupzyk. “Sequential Design.” In Encyclopedia of Research Design . Neil J. Salkind, ed. Thousand Oaks, CA: Sage, 2010; Sequential Analysis. Wikipedia.

Systematic Review

• A systematic review synthesizes the findings of multiple studies related to each other by incorporating strategies of analysis and interpretation intended to reduce biases and random errors.
• The application of critical exploration, evaluation, and synthesis methods separates insignificant, unsound, or redundant research from the most salient and relevant studies worthy of reflection.
• They can be use to identify, justify, and refine hypotheses, recognize and avoid hidden problems in prior studies, and explain data inconsistencies and conflicts in data.
• Systematic reviews can be used to help policy makers formulate evidence-based guidelines and regulations.
• The use of strict, explicit, and pre-determined methods of synthesis, when applied appropriately, provide reliable estimates about the effects of interventions, evaluations, and effects related to the overarching research problem investigated by each study under review.
• Systematic reviews illuminate where knowledge or thorough understanding of a research problem is lacking and, therefore, can then be used to guide future research.
• The accepted inclusion of unpublished studies [i.e., grey literature] ensures the broadest possible way to analyze and interpret research on a topic.
• Results of the synthesis can be generalized and the findings extrapolated into the general population with more validity than most other types of studies .
• Systematic reviews do not create new knowledge per se; they are a method for synthesizing existing studies about a research problem in order to gain new insights and determine gaps in the literature.
• The way researchers have carried out their investigations [e.g., the period of time covered, number of participants, sources of data analyzed, etc.] can make it difficult to effectively synthesize studies.
• The inclusion of unpublished studies can introduce bias into the review because they may not have undergone a rigorous peer-review process prior to publication. Examples may include conference presentations or proceedings, publications from government agencies, white papers, working papers, and internal documents from organizations, and doctoral dissertations and Master's theses.

Denyer, David and David Tranfield. "Producing a Systematic Review." In The Sage Handbook of Organizational Research Methods .  David A. Buchanan and Alan Bryman, editors. ( Thousand Oaks, CA: Sage Publications, 2009), pp. 671-689; Foster, Margaret J. and Sarah T. Jewell, editors. Assembling the Pieces of a Systematic Review: A Guide for Librarians . Lanham, MD: Rowman and Littlefield, 2017; Gough, David, Sandy Oliver, James Thomas, editors. Introduction to Systematic Reviews . 2nd edition. Los Angeles, CA: Sage Publications, 2017; Gopalakrishnan, S. and P. Ganeshkumar. “Systematic Reviews and Meta-analysis: Understanding the Best Evidence in Primary Healthcare.” Journal of Family Medicine and Primary Care 2 (2013): 9-14; Gough, David, James Thomas, and Sandy Oliver. "Clarifying Differences between Review Designs and Methods." Systematic Reviews 1 (2012): 1-9; Khan, Khalid S., Regina Kunz, Jos Kleijnen, and Gerd Antes. “Five Steps to Conducting a Systematic Review.” Journal of the Royal Society of Medicine 96 (2003): 118-121; Mulrow, C. D. “Systematic Reviews: Rationale for Systematic Reviews.” BMJ 309:597 (September 1994); O'Dwyer, Linda C., and Q. Eileen Wafford. "Addressing Challenges with Systematic Review Teams through Effective Communication: A Case Report." Journal of the Medical Library Association 109 (October 2021): 643-647; Okoli, Chitu, and Kira Schabram. "A Guide to Conducting a Systematic Literature Review of Information Systems Research."  Sprouts: Working Papers on Information Systems 10 (2010); Siddaway, Andy P., Alex M. Wood, and Larry V. Hedges. "How to Do a Systematic Review: A Best Practice Guide for Conducting and Reporting Narrative Reviews, Meta-analyses, and Meta-syntheses." Annual Review of Psychology 70 (2019): 747-770; Torgerson, Carole J. “Publication Bias: The Achilles’ Heel of Systematic Reviews?” British Journal of Educational Studies 54 (March 2006): 89-102; Torgerson, Carole. Systematic Reviews . New York: Continuum, 2003.

• << Previous: Purpose of Guide
• Next: Design Flaws to Avoid >>
• Last Updated: Aug 13, 2024 12:57 PM
• URL: https://libguides.usc.edu/writingguide

Types of Study Design

• 📖 Geeky Medics OSCE Book
• ⚡ Geeky Medics Bundles
• ✨ 1300+ OSCE Stations
• ✅ OSCE Checklist PDF Booklet
• 🧠 UKMLA AKT Question Bank
• 💊 PSA Question Bank
• 💉 Clinical Skills App
• 🗂️ Flashcard Collections | OSCE , Medicine , Surgery , Anatomy
• 💬 SCA Cases for MRCGP

To be the first to know about our latest videos subscribe to our YouTube channel 🙌

Table of Contents

Suggest an improvement

• Hidden Post Title
• Hidden Post URL
• Hidden Post ID
• Type of issue * N/A Fix spelling/grammar issue Add or fix a link Add or fix an image Add more detail Improve the quality of the writing Fix a factual error
• Please provide as much detail as possible * You don't need to tell us which article this feedback relates to, as we automatically capture that information for you.
• Your Email (optional) This allows us to get in touch for more details if required.
• Which organ is responsible for pumping blood around the body? * Enter a five letter word in lowercase
• Name This field is for validation purposes and should be left unchanged.

Introduction

Study designs are frameworks used in medical research to gather data and explore a specific research question .

Choosing an appropriate study design is one of many essential considerations before conducting research to minimise bias and yield valid results .

This guide provides a summary of study designs commonly used in medical research, their characteristics, advantages and disadvantages.

Case-report and case-series

A case report is a detailed description of a patient’s medical history, diagnosis, treatment, and outcome. A case report typically documents unusual or rare cases or reports  new or unexpected clinical findings .

A case series is a similar study that involves a group of patients sharing a similar disease or condition. A case series involves a comprehensive review of medical records for each patient to identify common features or disease patterns. Case series help better understand a disease’s presentation, diagnosis, and treatment.

While a case report focuses on a single patient, a case series involves a group of patients to provide a broader perspective on a specific disease. Both case reports and case series are important tools for understanding rare or unusual diseases .

Advantages of case series and case reports include:

• Able to describe rare or poorly understood conditions or diseases
• Helpful in generating hypotheses and identifying patterns or trends in patient populations
• Can be conducted relatively quickly and at a lower cost compared to other research designs

Disadvantages

Disadvantages of case series and case reports include:

• Prone to selection bias , meaning that the patients included in the series may not be representative of the general population
• Lack a control group, which makes it difficult to conclude  the effectiveness of different treatments or interventions
• They are descriptive and cannot establish causality or control for confounding factors

Cross-sectional study

A cross-sectional study aims to measure the prevalence or frequency of a disease in a population at a specific point in time. In other words, it provides a “ snapshot ” of the population at a single moment in time.

Cross-sectional studies are unique from other study designs in that they collect data on the exposure and the outcome of interest from a sample of individuals in the population. This type of data is used to investigate the distribution of health-related conditions and behaviours in different populations, which is especially useful for guiding the development of public health interventions .

Example of a cross-sectional study

A cross-sectional study might investigate the prevalence of hypertension (the outcome) in a sample of adults in a particular region. The researchers would measure blood pressure levels in each participant and gather information on other factors that could influence blood pressure, such as age, sex, weight, and lifestyle habits (exposure).

Advantages of cross-sectional studies include:

• Relatively quick and inexpensive to conduct compared to other study designs, such as cohort or case-control studies
• They can provide a snapshot of the prevalence and distribution of a particular health condition in a population
• They can help to identify patterns and associations between exposure and outcome variables, which can be used to generate hypotheses for further research

Disadvantages of cross-sectional studies include:

• They cannot establish causality , as they do not follow participants over time and cannot determine the temporal sequence between exposure and outcome
• Prone to selection bias , as the sample may not represent the entire population being studied
• They cannot account for confounding variables , which may affect the relationship between the exposure and outcome of interest

Case-control study

A case-control study compares people who have developed a disease of interest ( cases ) with people who have not developed the disease ( controls ) to identify potential risk factors associated with the disease.

Once cases and controls have been identified, researchers then collect information about related risk factors , such as age, sex, lifestyle factors, or environmental exposures, from individuals. By comparing the prevalence of risk factors between the cases and the controls, researchers can determine the association between the risk factors and the disease.

Example of a case-control study

A case-control study design might involve comparing a group of individuals with lung cancer (cases) to a group of individuals without lung cancer (controls) to assess the association between smoking (risk factor) and the development of lung cancer.

Advantages of case-control studies include:

• Useful for studying rare diseases , as they allow researchers to selectively recruit cases with the disease of interest
• Useful for investigating potential risk factors for a disease, as the researchers can collect data on many different factors from both cases and controls
• Can be helpful in situations where it is not ethical or practical to manipulate exposure levels or randomise study participants

Disadvantages of case-control studies include:

• Prone to selection bias , as the controls may not be representative of the general population or may have different underlying risk factors than the cases
• Cannot establish causality , as they can only identify associations between factors and disease
• May be limited by the availability of suitable controls , as finding appropriate controls who have similar characteristics to the cases can be challenging

Cohort study

A cohort study follows a group of individuals (a cohort) over time to investigate the relationship between an exposure or risk factor and a particular outcome or health condition. Cohort studies can be further classified into prospective or retrospective cohort studies.

Prospective cohort study

A prospective cohort study is a study in which the researchers select a group of individuals who do not have a particular disease or outcome of interest at the start of the study.

They then follow this cohort over time to track the number of patients who develop the outcome . Before the start of the study, information on exposure(s) of interest may also be collected.

Example of a prospective cohort study

A prospective cohort study might follow a group of individuals who have never smoked and measure their exposure to tobacco smoke over time to investigate the relationship between smoking and lung cancer .

Retrospective cohort study

In contrast, a retrospective cohort study is a study in which the researchers select a group of individuals who have already been exposed to something (e.g. smoking) and look back in time (for example, through patient charts) to see if they developed the outcome (e.g. lung cancer ).

The key difference in retrospective cohort studies is that data on exposure and outcome are collected after the outcome has occurred.

Example of a retrospective cohort study

A retrospective cohort study might look at the medical records of smokers and see if they developed a particular adverse event such as lung cancer.

Advantages of cohort studies include:

• Generally considered to be the most appropriate study design for investigating the temporal relationship between exposure and outcome
• Can provide estimates of incidence and relative risk , which are useful for quantifying the strength of the association between exposure and outcome
• Can be used to investigate multiple outcomes or endpoints associated with a particular exposure, which can help to identify unexpected effects or outcomes

Disadvantages of cohort studies include:

• Can be expensive and time-consuming to conduct, particularly for long-term follow-up
• May suffer from selection bias , as the sample may not be representative of the entire population being studied
• May suffer from attrition bias , as participants may drop out or be lost to follow-up over time

Meta-analysis

A meta-analysis is a type of study that involves extracting outcome data from all relevant studies in the literature and combining the results of multiple studies to produce an overall estimate of the effect size of an intervention or exposure.

Meta-analysis is often conducted alongside a systematic review and can be considered a study of studies . By doing this, researchers provide a more comprehensive and reliable estimate of the overall effect size and their confidence interval (a measure of precision).

Meta-analyses can be conducted for a wide range of research questions , including evaluating the effectiveness of medical interventions, identifying risk factors for disease, or assessing the accuracy of diagnostic tests. They are particularly useful when the results of individual studies are inconsistent or when the sample sizes of individual studies are small, as a meta-analysis can provide a more precise estimate of the true effect size.

When conducting a meta-analysis, researchers must carefully assess the risk of bias in each study to enhance the validity of the meta-analysis. Many aspects of research studies are prone to bias , such as the methodology and the reporting of results. Where studies exhibit a high risk of bias, authors may opt to exclude the study from the analysis or perform a subgroup or sensitivity analysis.

Advantages of a meta-analysis include:

• Combine the results of multiple studies, resulting in a larger sample size and increased statistical power, to provide a more comprehensive and precise estimate of the effect size of an intervention or outcome
• Can help to identify sources of heterogeneity or variability in the results of individual studies by exploring the influence of different study characteristics or subgroups
• Can help to resolve conflicting results or controversies in the literature by providing a more robust estimate of the effect size

Disadvantages of a meta-analysis include:

• Susceptible to publication bias , where studies with statistically significant or positive results are more likely to be published than studies with nonsignificant or negative results. This bias can lead to an overestimation of the treatment effect in a meta-analysis
• May not be appropriate if the studies included are too heterogeneous , as this can make it difficult to draw meaningful conclusions from the pooled results
• Depend on the quality and completeness of the data available from the individual studies and may be limited by the lack of data on certain outcomes or subgroups

Ecological study

An ecological study assesses the relationship between outcome and exposure at a population level or among groups of people rather than studying individuals directly.

The main goal of an ecological study is to observe and analyse patterns or trends at the population level and to identify potential associations or correlations between environmental factors or exposures and health outcomes.

Ecological studies focus on collecting data on population health outcomes , such as disease or mortality rates, and environmental factors or exposures, such as air pollution, temperature, or socioeconomic status.

Example of an ecological study

An ecological study might be used when comparing smoking rates and lung cancer incidence across different countries.

Advantages of an ecological study include:

• Provide insights into how social, economic, and environmental factors may impact health outcomes in real-world settings , which can inform public health policies and interventions
• Cost-effective and efficient, often using existing data or readily available data, such as data from national or regional databases

Disadvantages of an ecological study include:

• Ecological fallacy occurs when conclusions about individual-level associations are drawn from population-level differences
• Ecological studies rely on population-level (i.e. aggregate) rather than individual-level data; they cannot establish causal relationships between exposures and outcomes, as the studies do not account for differences or confounders at the individual level

Randomised controlled trial

A randomised controlled trial (RCT) is an important study design commonly used in medical research to determine the effectiveness of a treatment or intervention . It is considered the gold standard in research design because it allows researchers to draw cause-and-effect conclusions about the effects of an intervention.

In an RCT, participants are randomly assigned to two or more groups. One group receives the intervention being tested, such as a new drug or a specific medical procedure. In contrast, the other group is a control group and receives either no intervention or a placebo .

Randomisation ensures that each participant has an equal chance of being assigned to either group, thereby minimising selection bias . To reduce bias, an RCT often uses a technique called blinding , in which study participants, researchers, or analysts are kept unaware of participant assignment during the study. The participants are then followed over time, and outcome measures are collected and compared to determine if there is any statistical difference between the intervention and control groups.

Example of a randomised controlled trial

An RCT might be employed to evaluate the effectiveness of a new smoking cessation program in helping individuals quit smoking compared to the existing standard of care.

Advantages of an RCT include:

• Considered the most reliable study design for establishing causal relationships between interventions and outcomes and determining the effectiveness of interventions
• Randomisation of participants to intervention and control groups ensures that the groups are similar at the outset, reducing the risk of selection bias and enhancing internal validity
• Using a control group allows researchers to compare with the group that received the intervention while controlling for confounding factors

Disadvantages of an RCT include:

• Can raise ethical concerns ; for example, it may be considered unethical to withhold an intervention from a control group, especially if the intervention is known to be effective
• Can be expensive and time-consuming to conduct, requiring resources for participant recruitment, randomisation, data collection, and analysis
• Often have strict inclusion and exclusion criteria , which may limit the generalisability of the findings to broader populations
• May not always be feasible or practical for certain research questions, especially in rare diseases or when studying long-term outcomes

Dr Chris Jefferies

• Yuliya L, Qazi MA (eds.). Toronto Notes 2022. Toronto: Toronto Notes for Medical Students Inc; 2022.
• Le T, Bhushan V, Qui C, Chalise A, Kaparaliotis P, Coleman C, Kallianos K. First Aid for the USMLE Step 1 2023. New York: McGraw-Hill Education; 2023.
• Rothman KJ, Greenland S, Lash T. Modern Epidemiology. 3 rd ed. Philadelphia: Lippincott Williams & Wilkins; 2008.

Other pages

• Product Bundles 🎉
• Join the Team 🙌
• Institutional Licence 📚
• OSCE Station Creator Tool 🩺
• Create and Share Flashcards 🗂️
• OSCE Group Chat 💬
• Newsletter 📰
• Advertise With Us

Join the community

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base

Methodology

• Types of Research Designs Compared | Guide & Examples

Types of Research Designs Compared | Guide & Examples

Published on June 20, 2019 by Shona McCombes . Revised on June 22, 2023.

When you start planning a research project, developing research questions and creating a  research design , you will have to make various decisions about the type of research you want to do.

There are many ways to categorize different types of research. The words you use to describe your research depend on your discipline and field. In general, though, the form your research design takes will be shaped by:

• The type of knowledge you aim to produce
• The type of data you will collect and analyze
• The sampling methods , timescale and location of the research

This article takes a look at some common distinctions made between different types of research and outlines the key differences between them.

Table of contents

Types of research aims, types of research data, types of sampling, timescale, and location, other interesting articles.

The first thing to consider is what kind of knowledge your research aims to contribute.

Here's why students love Scribbr's proofreading services

Discover proofreading & editing

The next thing to consider is what type of data you will collect. Each kind of data is associated with a range of specific research methods and procedures.

Finally, you have to consider three closely related questions: how will you select the subjects or participants of the research? When and how often will you collect data from your subjects? And where will the research take place?

Keep in mind that the methods that you choose bring with them different risk factors and types of research bias . Biases aren’t completely avoidable, but can heavily impact the validity and reliability of your findings if left unchecked.

Choosing between all these different research types is part of the process of creating your research design , which determines exactly how your research will be conducted. But the type of research is only the first step: next, you have to make more concrete decisions about your research methods and the details of the study.

Read more about creating a research design

If you want to know more about statistics , methodology , or research bias , make sure to check out some of our other articles with explanations and examples.

• Normal distribution
• Degrees of freedom
• Null hypothesis
• Discourse analysis
• Control groups
• Mixed methods research
• Non-probability sampling
• Quantitative research
• Ecological validity

Research bias

• Rosenthal effect
• Implicit bias
• Cognitive bias
• Selection bias
• Negativity bias
• Status quo bias

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

McCombes, S. (2023, June 22). Types of Research Designs Compared | Guide & Examples. Scribbr. Retrieved August 19, 2024, from https://www.scribbr.com/methodology/types-of-research/

Is this article helpful?

Shona McCombes

Other students also liked, what is a research design | types, guide & examples, qualitative vs. quantitative research | differences, examples & methods, what is a research methodology | steps & tips, "i thought ai proofreading was useless but..".

I've been using Scribbr for years now and I know it's a service that won't disappoint. It does a good job spotting mistakes”

• Get new issue alerts Get alerts
• Submit a Manuscript

Secondary Logo

Journal logo.

Colleague's E-mail is Invalid

Your message has been successfully sent to your colleague.

Save my selection

Study designs

Part 1 – an overview and classification.

Ranganathan, Priya; Aggarwal, Rakesh 1

Department of Anaesthesiology, Tata Memorial Centre, Mumbai, Maharashtra, India

1 Department of Gastroenterology, Sanjay Gandhi Postgraduate Institute of Medical Sciences, Lucknow, Uttar Pradesh, India

Address for correspondence: Dr. Priya Ranganathan, Department of Anaesthesiology, Tata Memorial Centre, Ernest Borges Road, Parel, Mumbai - 400 012, Maharashtra, India. E-mail: [email protected]

This is an open access journal, and articles are distributed under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike 4.0 License, which allows others to remix, tweak, and build upon the work non-commercially, as long as appropriate credit is given and the new creations are licensed under the identical terms.

There are several types of research study designs, each with its inherent strengths and flaws. The study design used to answer a particular research question depends on the nature of the question and the availability of resources. In this article, which is the first part of a series on “study designs,” we provide an overview of research study designs and their classification. The subsequent articles will focus on individual designs.

INTRODUCTION

Research study design is a framework, or the set of methods and procedures used to collect and analyze data on variables specified in a particular research problem.

Research study designs are of many types, each with its advantages and limitations. The type of study design used to answer a particular research question is determined by the nature of question, the goal of research, and the availability of resources. Since the design of a study can affect the validity of its results, it is important to understand the different types of study designs and their strengths and limitations.

There are some terms that are used frequently while classifying study designs which are described in the following sections.

A variable represents a measurable attribute that varies across study units, for example, individual participants in a study, or at times even when measured in an individual person over time. Some examples of variables include age, sex, weight, height, health status, alive/dead, diseased/healthy, annual income, smoking yes/no, and treated/untreated.

Exposure (or intervention) and outcome variables

A large proportion of research studies assess the relationship between two variables. Here, the question is whether one variable is associated with or responsible for change in the value of the other variable. Exposure (or intervention) refers to the risk factor whose effect is being studied. It is also referred to as the independent or the predictor variable. The outcome (or predicted or dependent) variable develops as a consequence of the exposure (or intervention). Typically, the term “exposure” is used when the “causative” variable is naturally determined (as in observational studies – examples include age, sex, smoking, and educational status), and the term “intervention” is preferred where the researcher assigns some or all participants to receive a particular treatment for the purpose of the study (experimental studies – e.g., administration of a drug). If a drug had been started in some individuals but not in the others, before the study started, this counts as exposure, and not as intervention – since the drug was not started specifically for the study.

Observational versus interventional (or experimental) studies

Observational studies are those where the researcher is documenting a naturally occurring relationship between the exposure and the outcome that he/she is studying. The researcher does not do any active intervention in any individual, and the exposure has already been decided naturally or by some other factor. For example, looking at the incidence of lung cancer in smokers versus nonsmokers, or comparing the antenatal dietary habits of mothers with normal and low-birth babies. In these studies, the investigator did not play any role in determining the smoking or dietary habit in individuals.

For an exposure to determine the outcome, it must precede the latter. Any variable that occurs simultaneously with or following the outcome cannot be causative, and hence is not considered as an “exposure.”

Observational studies can be either descriptive (nonanalytical) or analytical (inferential) – this is discussed later in this article.

Interventional studies are experiments where the researcher actively performs an intervention in some or all members of a group of participants. This intervention could take many forms – for example, administration of a drug or vaccine, performance of a diagnostic or therapeutic procedure, and introduction of an educational tool. For example, a study could randomly assign persons to receive aspirin or placebo for a specific duration and assess the effect on the risk of developing cerebrovascular events.

Descriptive versus analytical studies

Descriptive (or nonanalytical) studies, as the name suggests, merely try to describe the data on one or more characteristics of a group of individuals. These do not try to answer questions or establish relationships between variables. Examples of descriptive studies include case reports, case series, and cross-sectional surveys (please note that cross-sectional surveys may be analytical studies as well – this will be discussed in the next article in this series). Examples of descriptive studies include a survey of dietary habits among pregnant women or a case series of patients with an unusual reaction to a drug.

Analytical studies attempt to test a hypothesis and establish causal relationships between variables. In these studies, the researcher assesses the effect of an exposure (or intervention) on an outcome. As described earlier, analytical studies can be observational (if the exposure is naturally determined) or interventional (if the researcher actively administers the intervention).

Directionality of study designs

Based on the direction of inquiry, study designs may be classified as forward-direction or backward-direction. In forward-direction studies, the researcher starts with determining the exposure to a risk factor and then assesses whether the outcome occurs at a future time point. This design is known as a cohort study. For example, a researcher can follow a group of smokers and a group of nonsmokers to determine the incidence of lung cancer in each. In backward-direction studies, the researcher begins by determining whether the outcome is present (cases vs. noncases [also called controls]) and then traces the presence of prior exposure to a risk factor. These are known as case–control studies. For example, a researcher identifies a group of normal-weight babies and a group of low-birth weight babies and then asks the mothers about their dietary habits during the index pregnancy.

Prospective versus retrospective study designs

The terms “prospective” and “retrospective” refer to the timing of the research in relation to the development of the outcome. In retrospective studies, the outcome of interest has already occurred (or not occurred – e.g., in controls) in each individual by the time s/he is enrolled, and the data are collected either from records or by asking participants to recall exposures. There is no follow-up of participants. By contrast, in prospective studies, the outcome (and sometimes even the exposure or intervention) has not occurred when the study starts and participants are followed up over a period of time to determine the occurrence of outcomes. Typically, most cohort studies are prospective studies (though there may be retrospective cohorts), whereas case–control studies are retrospective studies. An interventional study has to be, by definition, a prospective study since the investigator determines the exposure for each study participant and then follows them to observe outcomes.

The terms “prospective” versus “retrospective” studies can be confusing. Let us think of an investigator who starts a case–control study. To him/her, the process of enrolling cases and controls over a period of several months appears prospective. Hence, the use of these terms is best avoided. Or, at the very least, one must be clear that the terms relate to work flow for each individual study participant, and not to the study as a whole.

Classification of study designs

Figure 1 depicts a simple classification of research study designs. The Centre for Evidence-based Medicine has put forward a useful three-point algorithm which can help determine the design of a research study from its methods section:[ 1 ]

• Does the study describe the characteristics of a sample or does it attempt to analyze (or draw inferences about) the relationship between two variables? – If no, then it is a descriptive study, and if yes, it is an analytical (inferential) study
• If analytical, did the investigator determine the exposure? – If no, it is an observational study, and if yes, it is an experimental study
• If observational, when was the outcome determined? – at the start of the study (case–control study), at the end of a period of follow-up (cohort study), or simultaneously (cross sectional).

In the next few pieces in the series, we will discuss various study designs in greater detail.

Financial support and sponsorship

Conflicts of interest.

There are no conflicts of interest.

Epidemiologic methods; research design; research methodology

• + Favorites
• View in Gallery

Readers Of this Article Also Read

Study designs: part 2 – descriptive studies, study designs: part 3 - analytical observational studies, research studies on screening tests, introduction to qualitative research methods – part i, investigator-initiated studies: challenges and solutions.

Cookies on this website

We use cookies to ensure that we give you the best experience on our website. If you click 'Accept all cookies' we'll assume that you are happy to receive all cookies and you won't see this message again. If you click 'Reject all non-essential cookies' only necessary cookies providing core functionality such as security, network management, and accessibility will be enabled. Click 'Find out more' for information on how to change your cookie settings.

Study designs

This short article gives a brief guide to the different study types and a comparison of the advantages and disadvantages.

See also  Levels of Evidence  

These study designs all have similar components (as we’d expect from the PICO):

• A defined population (P) from which groups of subjects are studied
• Outcomes (O) that are measured

And for experimental and analytic observational studies:

• Interventions (I) or exposures (E) that are applied to different groups of subjects

Overview of the design tree

Figure 1 shows the tree of possible designs, branching into subgroups of study designs by whether the studies are descriptive or analytic and by whether the analytic studies are experimental or observational. The list is not completely exhaustive but covers most basics designs.

Figure: Tree of different types of studies (Q1, 2, and 3 refer to the three questions below)

> Download a PDF by Jeremy Howick about study designs

Our first distinction is whether the study is analytic or non-analytic. A  non-analytic  or  descriptive  study does not try to quantify the relationship but tries to give us a picture of what is happening in a population, e.g., the prevalence, incidence, or experience of a group. Descriptive studies include case reports, case-series, qualitative studies and surveys (cross-sectional) studies, which measure the frequency of several factors, and hence the size of the problem. They may sometimes also include analytic work (comparing factors “” see below).

An  analytic  study attempts to quantify the relationship between two factors, that is, the effect of an intervention (I) or exposure (E) on an outcome (O). To quantify the effect we will need to know the rate of outcomes in a comparison (C) group as well as the intervention or exposed group. Whether the researcher actively changes a factor or imposes uses an intervention determines whether the study is considered to be observational (passive involvement of researcher), or experimental (active involvement of researcher).

In  experimental  studies, the researcher manipulates the exposure, that is he or she allocates subjects to the intervention or exposure group. Experimental studies, or randomised controlled trials (RCTs), are similar to experiments in other areas of science. That is, subjects are allocated to two or more groups to receive an intervention or exposure and then followed up under carefully controlled conditions. Such studies controlled trials, particularly if randomised and blinded, have the potential to control for most of the biases that can occur in scientific studies but whether this actually occurs depends on the quality of the study design and implementation.

In  analytic observational  studies, the researcher simply measures the exposure or treatments of the groups. Analytical observational studies include case””control studies, cohort studies and some population (cross-sectional) studies. These studies all include matched groups of subjects and assess of associations between exposures and outcomes.

Observational studies investigate and record exposures (such as interventions or risk factors) and observe outcomes (such as disease) as they occur. Such studies may be purely descriptive or more analytical.

We should finally note that studies can incorporate several design elements. For example, a the control arm of a randomised trial may also be used as a cohort study; and the baseline measures of a cohort study may be used as a cross-sectional study.

Spotting the study design

The type of study can generally be worked at by looking at three issues (as per the Tree of design in Figure 1):

Q1. What was the aim of the study?

• To simply describe a population (PO questions) descriptive
• To quantify the relationship between factors (PICO questions) analytic.

Q2. If analytic, was the intervention randomly allocated?

• No? Observational study

For observational study the main types will then depend on the timing of the measurement of outcome, so our third question is:

Q3. When were the outcomes determined?

• Some time after the exposure or intervention? cohort study (‘prospective study’)
• At the same time as the exposure or intervention? cross sectional study or survey
• Before the exposure was determined? case-control study (‘retrospective study’ based on recall of the exposure)

Advantages and Disadvantages of the Designs

Randomised Controlled Trial

An experimental comparison study in which participants are allocated to treatment/intervention or control/placebo groups using a random mechanism (see randomisation). Best for study the effect of an intervention.

Advantages:

• unbiased distribution of confounders;
• blinding more likely;
• randomisation facilitates statistical analysis.

Disadvantages:

• expensive: time and money;
• volunteer bias;
• ethically problematic at times.

Crossover Design

A controlled trial where each study participant has both therapies, e.g, is randomised to treatment A first, at the crossover point they then start treatment B. Only relevant if the outcome is reversible with time, e.g, symptoms.

• all subjects serve as own controls and error variance is reduced thus reducing sample size needed;
• all subjects receive treatment (at least some of the time);
• statistical tests assuming randomisation can be used;
• blinding can be maintained.
• all subjects receive placebo or alternative treatment at some point;
• washout period lengthy or unknown;
• cannot be used for treatments with permanent effects

Cohort Study

Data are obtained from groups who have been exposed, or not exposed, to the new technology or factor of interest (eg from databases). No allocation of exposure is made by the researcher. Best for study the effect of predictive risk factors on an outcome.

• ethically safe;
• subjects can be matched;
• can establish timing and directionality of events;
• eligibility criteria and outcome assessments can be standardised;
• administratively easier and cheaper than RCT.
• controls may be difficult to identify;
• exposure may be linked to a hidden confounder;
• blinding is difficult;
• randomisation not present;
• for rare disease, large sample sizes or long follow-up necessary.

Case-Control Studies

Patients with a certain outcome or disease and an appropriate group of controls without the outcome or disease are selected (usually with careful consideration of appropriate choice of controls, matching, etc) and then information is obtained on whether the subjects have been exposed to the factor under investigation.

• quick and cheap;
• only feasible method for very rare disorders or those with long lag between exposure and outcome;
• fewer subjects needed than cross-sectional studies.
• reliance on recall or records to determine exposure status;
• confounders;
• selection of control groups is difficult;
• potential bias: recall, selection.

Cross-Sectional Survey

A study that examines the relationship between diseases (or other health-related characteristics) and other variables of interest as they exist in a defined population at one particular time (ie exposure and outcomes are both measured at the same time). Best for quantifying the prevalence of a disease or risk factor, and for quantifying the accuracy of a diagnostic test.

• cheap and simple;
• ethically safe.
• establishes association at most, not causality;
• recall bias susceptibility;
• confounders may be unequally distributed;
• Neyman bias;
• group sizes may be unequal.

Understanding Research Study Designs

Table of Contents

In order to find the best possible evidence, it helps to understand the basic designs of research studies. The following basic definitions and examples of clinical research designs follow the “ levels of evidence.”

Case Series and Case Reports

Case control studies, cohort studies, randomized controlled studies, double-blind method, meta-analyses, systematic reviews.

These consist either of collections of reports on the treatment of individual patients with the same condition, or of reports on a single patient.

• Case series/reports are used to illustrate an aspect of a condition, the treatment or the adverse reaction to treatment.
• Example : You have a patient that has a condition that you are unfamiliar with. You would search for case reports that could help you decide on a direction of treatment or to assist on a diagnosis.
• Case series/reports have no control group (one to compare outcomes), so they have no statistical validity.
• The benefits of case series/reports are that they are easy to understand and can be written up in a very short period of time.

Patients who already have a certain condition are compared with people who do not.

• Case control studies are generally designed to estimate the odds (using an odds ratio) of developing the studied condition/disease. They can determine if there is an associational relationship between condition and risk factor
• Example: A study in which colon cancer patients are asked what kinds of food they have eaten in the past and the answers are compared with a selected control group.
• Case control studies are less reliable than either randomized controlled trials or cohort studies.
• A major drawback to case control studies is that one cannot directly obtain absolute risk (i.e. incidence) of a bad outcome.
• The advantages of case control studies are they can be done quickly and are very efficient for conditions/diseases with rare outcomes.

Also called longitudinal studies, involve a case-defined population who presently have a certain exposure and/or receive a particular treatment that are followed over time and compared with another group who are not affected by the exposure under investigation.

• Cohort studies may be either prospective (i.e., exposure factors are identified at the beginning of a study and a defined population is followed into the future), or historical/retrospective (i.e., past medical records for the defined population are used to identify exposure factors).
• Cohort studies are used to establish causation of a disease or to evaluate the outcome/impact of treatment, when randomized controlled clinical trials are not possible.
• Example: One of the more well-know examples of a cohort study is the Framingham Heart Study, which followed generations of residents of Framingham, Massachusetts.
• Cohort studies are not as reliable as randomized controlled studies, since the two groups may differ in ways other than the variable under study.
• Other problems with cohort studies are that they require a large sample size, are inefficient for rare outcomes, and can take long periods of time. 

This is a study in which 1) There are two groups, one treatment group and one control group. The treatment group receives the treatment under investigation, and the control group receives either no treatment (placebo) or standard treatment. 2) Patients are randomly assigned to all groups. 

• Randomized controlled trials are considered the “gold standard” in medical research. They lend themselves best to answering questions about the effectiveness of different therapies or interventions.
• Randomization helps avoid the bias in choice of patients-to-treatment that a physician might be subject to. It also increases the probability that differences between the groups can be attributed to the treatment(s) under study.
• Having a  control group allows for a comparison of treatments – e.g., treatment A produced favorable results 56% of the time versus treatment B in which only 25% of patients had favorable results.
• There are certain types of questions on which randomized controlled studies cannot be done for ethical reasons, for instance, if patients were asked to undertake harmful experiences (like smoking) or denied any treatment beyond a placebo when there are known effective treatments.

A type of randomized controlled clinical trial/study in which neither medical staff/physician nor the patient knows which of several possible treatments/therapies the patient is receiving.

• Example : Studies of treatments that consist essentially of taking pills are very easy to do double blind – the patient takes one of two pills of identical size, shape, and color, and neither the patient nor the physician needs to know which is which.
• A double blind study is the most rigorous clinical research design because, in addition to the randomization of subjects, which reduces the risk of bias, it can eliminate or minimize the placebo effect which is a further challenge to the validity of a study.

Meta-analysis is a systematic, objective way to combine data from many studies, usually from randomized controlled clinical trials, and arrive at a pooled estimate of treatment effectiveness and statistical significance.

• Meta-analysis can also combine data from case/control and cohort studies. The advantage to merging these data is that it increases sample size and allows for analyses that would not otherwise be possible.
• They should not be confused with reviews of the literature or systematic reviews. 
• Two problems with meta-analysis are publication bias (studies showing no effect or little effect are often not published and just “filed” away) and the quality of the design of the studies from which data is pulled. This can lead to misleading results when all the data on the subject from “published” literature are summarized.

A systematic review is a comprehensive survey of a topic that takes great care to find all relevant studies of the highest level of evidence, published and unpublished, assess each study, synthesize the findings from individual studies in an unbiased, explicit and reproducible way and present a balanced and impartial summary of the findings with due consideration of any flaws in the evidence. In this way it can be used for the evaluation of either existing or new technologies and practices.   

A systematic review is more rigorous than a traditional literature review and attempts to reduce the influence of bias. In order to do this, a systematic review follows a formal process:

• Clearly formulated research question
• Published & unpublished (conferences, company reports, “file drawer reports”, etc.) literature is carefully searched for relevant research
• Identified research is assessed according to an explicit methodology
• Results of the critical assessment of the individual studies are combined
• Final results are placed in context, addressing such issues are quality of the included studies, impact of bias and the applicability of the findings
• The difference between a systematic review and a meta-analysis is that a systematic review looks at the whole picture (qualitative view), while a meta-analysis looks for the specific statistical picture (quantitative view). 

R esearch Process in the Health Sciences  (35:37 min): Overview of the scientific research process in the health sciences. Follows the seven steps: defining the problem, reviewing the literature, formulating a hypothesis, choosing a research design, collecting data, analyzing the data and interpretation and report writing. Includes a set of additional readings and library resources.

Research Study Designs in the Health Sciences  (29:36 min): An overview of research study designs used by health sciences researchers. Covers case reports/case series, case control studies, cohort studies, correlational studies, cross-sectional studies, experimental studies (including randomized control trials), systematic reviews and meta-analysis.  Additional readings and library resources are also provided.

Research Design 101

Everything You Need To Get Started (With Examples)

By: Derek Jansen (MBA) | Reviewers: Eunice Rautenbach (DTech) & Kerryn Warren (PhD) | April 2023

Navigating the world of research can be daunting, especially if you’re a first-time researcher. One concept you’re bound to run into fairly early in your research journey is that of “ research design ”. Here, we’ll guide you through the basics using practical examples , so that you can approach your research with confidence.

Overview: Research Design 101

What is research design.

• Research design types for quantitative studies
• Video explainer : quantitative research design
• Research design types for qualitative studies
• Video explainer : qualitative research design
• How to choose a research design
• Key takeaways

Research design refers to the overall plan, structure or strategy that guides a research project , from its conception to the final data analysis. A good research design serves as the blueprint for how you, as the researcher, will collect and analyse data while ensuring consistency, reliability and validity throughout your study.

Understanding different types of research designs is essential as helps ensure that your approach is suitable  given your research aims, objectives and questions , as well as the resources you have available to you. Without a clear big-picture view of how you’ll design your research, you run the risk of potentially making misaligned choices in terms of your methodology – especially your sampling , data collection and data analysis decisions.

The problem with defining research design…

One of the reasons students struggle with a clear definition of research design is because the term is used very loosely across the internet, and even within academia.

Some sources claim that the three research design types are qualitative, quantitative and mixed methods , which isn’t quite accurate (these just refer to the type of data that you’ll collect and analyse). Other sources state that research design refers to the sum of all your design choices, suggesting it’s more like a research methodology . Others run off on other less common tangents. No wonder there’s confusion!

In this article, we’ll clear up the confusion. We’ll explain the most common research design types for both qualitative and quantitative research projects, whether that is for a full dissertation or thesis, or a smaller research paper or article.

Research Design: Quantitative Studies

Quantitative research involves collecting and analysing data in a numerical form. Broadly speaking, there are four types of quantitative research designs: descriptive , correlational , experimental , and quasi-experimental . 

Descriptive Research Design

As the name suggests, descriptive research design focuses on describing existing conditions, behaviours, or characteristics by systematically gathering information without manipulating any variables. In other words, there is no intervention on the researcher’s part – only data collection.

For example, if you’re studying smartphone addiction among adolescents in your community, you could deploy a survey to a sample of teens asking them to rate their agreement with certain statements that relate to smartphone addiction. The collected data would then provide insight regarding how widespread the issue may be – in other words, it would describe the situation.

The key defining attribute of this type of research design is that it purely describes the situation . In other words, descriptive research design does not explore potential relationships between different variables or the causes that may underlie those relationships. Therefore, descriptive research is useful for generating insight into a research problem by describing its characteristics . By doing so, it can provide valuable insights and is often used as a precursor to other research design types.

Correlational Research Design

Correlational design is a popular choice for researchers aiming to identify and measure the relationship between two or more variables without manipulating them . In other words, this type of research design is useful when you want to know whether a change in one thing tends to be accompanied by a change in another thing.

For example, if you wanted to explore the relationship between exercise frequency and overall health, you could use a correlational design to help you achieve this. In this case, you might gather data on participants’ exercise habits, as well as records of their health indicators like blood pressure, heart rate, or body mass index. Thereafter, you’d use a statistical test to assess whether there’s a relationship between the two variables (exercise frequency and health).

As you can see, correlational research design is useful when you want to explore potential relationships between variables that cannot be manipulated or controlled for ethical, practical, or logistical reasons. It is particularly helpful in terms of developing predictions , and given that it doesn’t involve the manipulation of variables, it can be implemented at a large scale more easily than experimental designs (which will look at next).

That said, it’s important to keep in mind that correlational research design has limitations – most notably that it cannot be used to establish causality . In other words, correlation does not equal causation . To establish causality, you’ll need to move into the realm of experimental design, coming up next…

Need a helping hand?

Experimental Research Design

Experimental research design is used to determine if there is a causal relationship between two or more variables . With this type of research design, you, as the researcher, manipulate one variable (the independent variable) while controlling others (dependent variables). Doing so allows you to observe the effect of the former on the latter and draw conclusions about potential causality.

For example, if you wanted to measure if/how different types of fertiliser affect plant growth, you could set up several groups of plants, with each group receiving a different type of fertiliser, as well as one with no fertiliser at all. You could then measure how much each plant group grew (on average) over time and compare the results from the different groups to see which fertiliser was most effective.

Overall, experimental research design provides researchers with a powerful way to identify and measure causal relationships (and the direction of causality) between variables. However, developing a rigorous experimental design can be challenging as it’s not always easy to control all the variables in a study. This often results in smaller sample sizes , which can reduce the statistical power and generalisability of the results.

Moreover, experimental research design requires random assignment . This means that the researcher needs to assign participants to different groups or conditions in a way that each participant has an equal chance of being assigned to any group (note that this is not the same as random sampling ). Doing so helps reduce the potential for bias and confounding variables . This need for random assignment can lead to ethics-related issues . For example, withholding a potentially beneficial medical treatment from a control group may be considered unethical in certain situations.

Quasi-Experimental Research Design

Quasi-experimental research design is used when the research aims involve identifying causal relations , but one cannot (or doesn’t want to) randomly assign participants to different groups (for practical or ethical reasons). Instead, with a quasi-experimental research design, the researcher relies on existing groups or pre-existing conditions to form groups for comparison.

For example, if you were studying the effects of a new teaching method on student achievement in a particular school district, you may be unable to randomly assign students to either group and instead have to choose classes or schools that already use different teaching methods. This way, you still achieve separate groups, without having to assign participants to specific groups yourself.

Naturally, quasi-experimental research designs have limitations when compared to experimental designs. Given that participant assignment is not random, it’s more difficult to confidently establish causality between variables, and, as a researcher, you have less control over other variables that may impact findings.

All that said, quasi-experimental designs can still be valuable in research contexts where random assignment is not possible and can often be undertaken on a much larger scale than experimental research, thus increasing the statistical power of the results. What’s important is that you, as the researcher, understand the limitations of the design and conduct your quasi-experiment as rigorously as possible, paying careful attention to any potential confounding variables .

Research Design: Qualitative Studies

There are many different research design types when it comes to qualitative studies, but here we’ll narrow our focus to explore the “Big 4”. Specifically, we’ll look at phenomenological design, grounded theory design, ethnographic design, and case study design.

Phenomenological Research Design

Phenomenological design involves exploring the meaning of lived experiences and how they are perceived by individuals. This type of research design seeks to understand people’s perspectives , emotions, and behaviours in specific situations. Here, the aim for researchers is to uncover the essence of human experience without making any assumptions or imposing preconceived ideas on their subjects.

For example, you could adopt a phenomenological design to study why cancer survivors have such varied perceptions of their lives after overcoming their disease. This could be achieved by interviewing survivors and then analysing the data using a qualitative analysis method such as thematic analysis to identify commonalities and differences.

Phenomenological research design typically involves in-depth interviews or open-ended questionnaires to collect rich, detailed data about participants’ subjective experiences. This richness is one of the key strengths of phenomenological research design but, naturally, it also has limitations. These include potential biases in data collection and interpretation and the lack of generalisability of findings to broader populations.

Grounded Theory Research Design

Grounded theory (also referred to as “GT”) aims to develop theories by continuously and iteratively analysing and comparing data collected from a relatively large number of participants in a study. It takes an inductive (bottom-up) approach, with a focus on letting the data “speak for itself”, without being influenced by preexisting theories or the researcher’s preconceptions.

As an example, let’s assume your research aims involved understanding how people cope with chronic pain from a specific medical condition, with a view to developing a theory around this. In this case, grounded theory design would allow you to explore this concept thoroughly without preconceptions about what coping mechanisms might exist. You may find that some patients prefer cognitive-behavioural therapy (CBT) while others prefer to rely on herbal remedies. Based on multiple, iterative rounds of analysis, you could then develop a theory in this regard, derived directly from the data (as opposed to other preexisting theories and models).

Grounded theory typically involves collecting data through interviews or observations and then analysing it to identify patterns and themes that emerge from the data. These emerging ideas are then validated by collecting more data until a saturation point is reached (i.e., no new information can be squeezed from the data). From that base, a theory can then be developed .

As you can see, grounded theory is ideally suited to studies where the research aims involve theory generation , especially in under-researched areas. Keep in mind though that this type of research design can be quite time-intensive , given the need for multiple rounds of data collection and analysis.

Ethnographic Research Design

Ethnographic design involves observing and studying a culture-sharing group of people in their natural setting to gain insight into their behaviours, beliefs, and values. The focus here is on observing participants in their natural environment (as opposed to a controlled environment). This typically involves the researcher spending an extended period of time with the participants in their environment, carefully observing and taking field notes .

All of this is not to say that ethnographic research design relies purely on observation. On the contrary, this design typically also involves in-depth interviews to explore participants’ views, beliefs, etc. However, unobtrusive observation is a core component of the ethnographic approach.

As an example, an ethnographer may study how different communities celebrate traditional festivals or how individuals from different generations interact with technology differently. This may involve a lengthy period of observation, combined with in-depth interviews to further explore specific areas of interest that emerge as a result of the observations that the researcher has made.

As you can probably imagine, ethnographic research design has the ability to provide rich, contextually embedded insights into the socio-cultural dynamics of human behaviour within a natural, uncontrived setting. Naturally, however, it does come with its own set of challenges, including researcher bias (since the researcher can become quite immersed in the group), participant confidentiality and, predictably, ethical complexities . All of these need to be carefully managed if you choose to adopt this type of research design.

Case Study Design

With case study research design, you, as the researcher, investigate a single individual (or a single group of individuals) to gain an in-depth understanding of their experiences, behaviours or outcomes. Unlike other research designs that are aimed at larger sample sizes, case studies offer a deep dive into the specific circumstances surrounding a person, group of people, event or phenomenon, generally within a bounded setting or context .

As an example, a case study design could be used to explore the factors influencing the success of a specific small business. This would involve diving deeply into the organisation to explore and understand what makes it tick – from marketing to HR to finance. In terms of data collection, this could include interviews with staff and management, review of policy documents and financial statements, surveying customers, etc.

While the above example is focused squarely on one organisation, it’s worth noting that case study research designs can have different variation s, including single-case, multiple-case and longitudinal designs. As you can see in the example, a single-case design involves intensely examining a single entity to understand its unique characteristics and complexities. Conversely, in a multiple-case design , multiple cases are compared and contrasted to identify patterns and commonalities. Lastly, in a longitudinal case design , a single case or multiple cases are studied over an extended period of time to understand how factors develop over time.

As you can see, a case study research design is particularly useful where a deep and contextualised understanding of a specific phenomenon or issue is desired. However, this strength is also its weakness. In other words, you can’t generalise the findings from a case study to the broader population. So, keep this in mind if you’re considering going the case study route.

How To Choose A Research Design

Having worked through all of these potential research designs, you’d be forgiven for feeling a little overwhelmed and wondering, “ But how do I decide which research design to use? ”. While we could write an entire post covering that alone, here are a few factors to consider that will help you choose a suitable research design for your study.

Data type: The first determining factor is naturally the type of data you plan to be collecting – i.e., qualitative or quantitative. This may sound obvious, but we have to be clear about this – don’t try to use a quantitative research design on qualitative data (or vice versa)!

Research aim(s) and question(s): As with all methodological decisions, your research aim and research questions will heavily influence your research design. For example, if your research aims involve developing a theory from qualitative data, grounded theory would be a strong option. Similarly, if your research aims involve identifying and measuring relationships between variables, one of the experimental designs would likely be a better option.

Time: It’s essential that you consider any time constraints you have, as this will impact the type of research design you can choose. For example, if you’ve only got a month to complete your project, a lengthy design such as ethnography wouldn’t be a good fit.

Resources: Take into account the resources realistically available to you, as these need to factor into your research design choice. For example, if you require highly specialised lab equipment to execute an experimental design, you need to be sure that you’ll have access to that before you make a decision.

Keep in mind that when it comes to research, it’s important to manage your risks and play as conservatively as possible. If your entire project relies on you achieving a huge sample, having access to niche equipment or holding interviews with very difficult-to-reach participants, you’re creating risks that could kill your project. So, be sure to think through your choices carefully and make sure that you have backup plans for any existential risks. Remember that a relatively simple methodology executed well generally will typically earn better marks than a highly-complex methodology executed poorly.

Recap: Key Takeaways

We’ve covered a lot of ground here. Let’s recap by looking at the key takeaways:

• Research design refers to the overall plan, structure or strategy that guides a research project, from its conception to the final analysis of data.
• Research designs for quantitative studies include descriptive , correlational , experimental and quasi-experimenta l designs.
• Research designs for qualitative studies include phenomenological , grounded theory , ethnographic and case study designs.
• When choosing a research design, you need to consider a variety of factors, including the type of data you’ll be working with, your research aims and questions, your time and the resources available to you.

If you need a helping hand with your research design (or any other aspect of your research), check out our private coaching services .

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

11 Comments

Is there any blog article explaining more on Case study research design? Is there a Case study write-up template? Thank you.

Thanks this was quite valuable to clarify such an important concept.

Thanks for this simplified explanations. it is quite very helpful.

This was really helpful. thanks

Thank you for your explanation. I think case study research design and the use of secondary data in researches needs to be talked about more in your videos and articles because there a lot of case studies research design tailored projects out there.

Please is there any template for a case study research design whose data type is a secondary data on your repository?

This post is very clear, comprehensive and has been very helpful to me. It has cleared the confusion I had in regard to research design and methodology.

This post is helpful, easy to understand, and deconstructs what a research design is. Thanks

This post is really helpful.

how to cite this page

Thank you very much for the post. It is wonderful and has cleared many worries in my mind regarding research designs. I really appreciate .

how can I put this blog as my reference(APA style) in bibliography part?

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

• Privacy Policy

Home » Research Design – Types, Methods and Examples

Research Design – Types, Methods and Examples

Table of Contents

Research Design

Definition:

Research design refers to the overall strategy or plan for conducting a research study. It outlines the methods and procedures that will be used to collect and analyze data, as well as the goals and objectives of the study. Research design is important because it guides the entire research process and ensures that the study is conducted in a systematic and rigorous manner.

Types of Research Design

Types of Research Design are as follows:

Descriptive Research Design

This type of research design is used to describe a phenomenon or situation. It involves collecting data through surveys, questionnaires, interviews, and observations. The aim of descriptive research is to provide an accurate and detailed portrayal of a particular group, event, or situation. It can be useful in identifying patterns, trends, and relationships in the data.

Correlational Research Design

Correlational research design is used to determine if there is a relationship between two or more variables. This type of research design involves collecting data from participants and analyzing the relationship between the variables using statistical methods. The aim of correlational research is to identify the strength and direction of the relationship between the variables.

Experimental Research Design

Experimental research design is used to investigate cause-and-effect relationships between variables. This type of research design involves manipulating one variable and measuring the effect on another variable. It usually involves randomly assigning participants to groups and manipulating an independent variable to determine its effect on a dependent variable. The aim of experimental research is to establish causality.

Quasi-experimental Research Design

Quasi-experimental research design is similar to experimental research design, but it lacks one or more of the features of a true experiment. For example, there may not be random assignment to groups or a control group. This type of research design is used when it is not feasible or ethical to conduct a true experiment.

Case Study Research Design

Case study research design is used to investigate a single case or a small number of cases in depth. It involves collecting data through various methods, such as interviews, observations, and document analysis. The aim of case study research is to provide an in-depth understanding of a particular case or situation.

Longitudinal Research Design

Longitudinal research design is used to study changes in a particular phenomenon over time. It involves collecting data at multiple time points and analyzing the changes that occur. The aim of longitudinal research is to provide insights into the development, growth, or decline of a particular phenomenon over time.

Structure of Research Design

The format of a research design typically includes the following sections:

• Introduction : This section provides an overview of the research problem, the research questions, and the importance of the study. It also includes a brief literature review that summarizes previous research on the topic and identifies gaps in the existing knowledge.
• Research Questions or Hypotheses: This section identifies the specific research questions or hypotheses that the study will address. These questions should be clear, specific, and testable.
• Research Methods : This section describes the methods that will be used to collect and analyze data. It includes details about the study design, the sampling strategy, the data collection instruments, and the data analysis techniques.
• Data Collection: This section describes how the data will be collected, including the sample size, data collection procedures, and any ethical considerations.
• Data Analysis: This section describes how the data will be analyzed, including the statistical techniques that will be used to test the research questions or hypotheses.
• Results : This section presents the findings of the study, including descriptive statistics and statistical tests.
• Discussion and Conclusion : This section summarizes the key findings of the study, interprets the results, and discusses the implications of the findings. It also includes recommendations for future research.
• References : This section lists the sources cited in the research design.

Example of Research Design

An Example of Research Design could be:

Research question: Does the use of social media affect the academic performance of high school students?

Research design:

• Research approach : The research approach will be quantitative as it involves collecting numerical data to test the hypothesis.
• Research design : The research design will be a quasi-experimental design, with a pretest-posttest control group design.
• Sample : The sample will be 200 high school students from two schools, with 100 students in the experimental group and 100 students in the control group.
• Data collection : The data will be collected through surveys administered to the students at the beginning and end of the academic year. The surveys will include questions about their social media usage and academic performance.
• Data analysis : The data collected will be analyzed using statistical software. The mean scores of the experimental and control groups will be compared to determine whether there is a significant difference in academic performance between the two groups.
• Limitations : The limitations of the study will be acknowledged, including the fact that social media usage can vary greatly among individuals, and the study only focuses on two schools, which may not be representative of the entire population.
• Ethical considerations: Ethical considerations will be taken into account, such as obtaining informed consent from the participants and ensuring their anonymity and confidentiality.

How to Write Research Design

Writing a research design involves planning and outlining the methodology and approach that will be used to answer a research question or hypothesis. Here are some steps to help you write a research design:

• Define the research question or hypothesis : Before beginning your research design, you should clearly define your research question or hypothesis. This will guide your research design and help you select appropriate methods.
• Select a research design: There are many different research designs to choose from, including experimental, survey, case study, and qualitative designs. Choose a design that best fits your research question and objectives.
• Develop a sampling plan : If your research involves collecting data from a sample, you will need to develop a sampling plan. This should outline how you will select participants and how many participants you will include.
• Define variables: Clearly define the variables you will be measuring or manipulating in your study. This will help ensure that your results are meaningful and relevant to your research question.
• Choose data collection methods : Decide on the data collection methods you will use to gather information. This may include surveys, interviews, observations, experiments, or secondary data sources.
• Create a data analysis plan: Develop a plan for analyzing your data, including the statistical or qualitative techniques you will use.
• Consider ethical concerns : Finally, be sure to consider any ethical concerns related to your research, such as participant confidentiality or potential harm.

When to Write Research Design

Research design should be written before conducting any research study. It is an important planning phase that outlines the research methodology, data collection methods, and data analysis techniques that will be used to investigate a research question or problem. The research design helps to ensure that the research is conducted in a systematic and logical manner, and that the data collected is relevant and reliable.

Ideally, the research design should be developed as early as possible in the research process, before any data is collected. This allows the researcher to carefully consider the research question, identify the most appropriate research methodology, and plan the data collection and analysis procedures in advance. By doing so, the research can be conducted in a more efficient and effective manner, and the results are more likely to be valid and reliable.

Purpose of Research Design

The purpose of research design is to plan and structure a research study in a way that enables the researcher to achieve the desired research goals with accuracy, validity, and reliability. Research design is the blueprint or the framework for conducting a study that outlines the methods, procedures, techniques, and tools for data collection and analysis.

Some of the key purposes of research design include:

• Providing a clear and concise plan of action for the research study.
• Ensuring that the research is conducted ethically and with rigor.
• Maximizing the accuracy and reliability of the research findings.
• Minimizing the possibility of errors, biases, or confounding variables.
• Ensuring that the research is feasible, practical, and cost-effective.
• Determining the appropriate research methodology to answer the research question(s).
• Identifying the sample size, sampling method, and data collection techniques.
• Determining the data analysis method and statistical tests to be used.
• Facilitating the replication of the study by other researchers.
• Enhancing the validity and generalizability of the research findings.

Applications of Research Design

There are numerous applications of research design in various fields, some of which are:

• Social sciences: In fields such as psychology, sociology, and anthropology, research design is used to investigate human behavior and social phenomena. Researchers use various research designs, such as experimental, quasi-experimental, and correlational designs, to study different aspects of social behavior.
• Education : Research design is essential in the field of education to investigate the effectiveness of different teaching methods and learning strategies. Researchers use various designs such as experimental, quasi-experimental, and case study designs to understand how students learn and how to improve teaching practices.
• Health sciences : In the health sciences, research design is used to investigate the causes, prevention, and treatment of diseases. Researchers use various designs, such as randomized controlled trials, cohort studies, and case-control studies, to study different aspects of health and healthcare.
• Business : Research design is used in the field of business to investigate consumer behavior, marketing strategies, and the impact of different business practices. Researchers use various designs, such as survey research, experimental research, and case studies, to study different aspects of the business world.
• Engineering : In the field of engineering, research design is used to investigate the development and implementation of new technologies. Researchers use various designs, such as experimental research and case studies, to study the effectiveness of new technologies and to identify areas for improvement.

Advantages of Research Design

Here are some advantages of research design:

• Systematic and organized approach : A well-designed research plan ensures that the research is conducted in a systematic and organized manner, which makes it easier to manage and analyze the data.
• Clear objectives: The research design helps to clarify the objectives of the study, which makes it easier to identify the variables that need to be measured, and the methods that need to be used to collect and analyze data.
• Minimizes bias: A well-designed research plan minimizes the chances of bias, by ensuring that the data is collected and analyzed objectively, and that the results are not influenced by the researcher’s personal biases or preferences.
• Efficient use of resources: A well-designed research plan helps to ensure that the resources (time, money, and personnel) are used efficiently and effectively, by focusing on the most important variables and methods.
• Replicability: A well-designed research plan makes it easier for other researchers to replicate the study, which enhances the credibility and reliability of the findings.
• Validity: A well-designed research plan helps to ensure that the findings are valid, by ensuring that the methods used to collect and analyze data are appropriate for the research question.
• Generalizability : A well-designed research plan helps to ensure that the findings can be generalized to other populations, settings, or situations, which increases the external validity of the study.

Research Design Vs Research Methodology

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Research Methodology – Types, Examples and...

Purpose of Research – Objectives and Applications

Research Paper Conclusion – Writing Guide and...

Research Paper Title – Writing Guide and Example

Significance of the Study – Examples and Writing...

Conceptual Framework – Types, Methodology and...

Leave a comment x.

Save my name, email, and website in this browser for the next time I comment.

Literature Reviews: Types of Clinical Study Designs

• Library Basics
• 1. Choose Your Topic
• How to Find Books
• Types of Clinical Study Designs
• Types of Literature
• 3. Search the Literature
• 4. Read & Analyze the Literature
• 5. Write the Review
• Keeping Track of Information
• Style Guides
• Books, Tutorials & Examples

Types of Study Designs

Meta-Analysis A way of combining data from many different research studies. A meta-analysis is a statistical process that combines the findings from individual studies.  Example :  Anxiety outcomes after physical activity interventions: meta-analysis findings .  Conn V.  Nurs Res . 2010 May-Jun;59(3):224-31.

Systematic Review A summary of the clinical literature. A systematic review is a critical assessment and evaluation of all research studies that address a particular clinical issue. The researchers use an organized method of locating, assembling, and evaluating a body of literature on a particular topic using a set of specific criteria. A systematic review typically includes a description of the findings of the collection of research studies. The systematic review may also include a quantitative pooling of data, called a meta-analysis.  Example :  Complementary and alternative medicine use among women with breast cancer: a systematic review.   Wanchai A, Armer JM, Stewart BR. Clin J Oncol Nurs . 2010 Aug;14(4):E45-55.

Randomized Controlled Trial A controlled clinical trial that randomly (by chance) assigns participants to two or more groups. There are various methods to randomize study participants to their groups.  Example :  Meditation or exercise for preventing acute respiratory infection: a randomized controlled trial .  Barrett B, et al.  Ann Fam Med . 2012 Jul-Aug;10(4):337-46.

Cohort Study (Prospective Observational Study) A clinical research study in which people who presently have a certain condition or receive a particular treatment are followed over time and compared with another group of people who are not affected by the condition.  Example : Smokeless tobacco cessation in South Asian communities: a multi-centre prospective cohort study . Croucher R, et al. Addiction. 2012 Dec;107 Suppl 2:45-52.

Case-control Study Case-control studies begin with the outcomes and do not follow people over time. Researchers choose people with a particular result (the cases) and interview the groups or check their records to ascertain what different experiences they had. They compare the odds of having an experience with the outcome to the odds of having an experience without the outcome.  Example :  Non-use of bicycle helmets and risk of fatal head injury: a proportional mortality, case-control study .  Persaud N, et al.  CMAJ . 2012 Nov 20;184(17):E921-3.

Cross-sectional study The observation of a defined population at a single point in time or time interval. Exposure and outcome are determined simultaneously.  Example :  Fasting might not be necessary before lipid screening: a nationally representative cross-sectional study .  Steiner MJ, et al.  Pediatrics . 2011 Sep;128(3):463-70.

Case Reports and Series A report on a series of patients with an outcome of interest. No control group is involved.  Example :  Students mentoring students in a service-learning clinical supervision experience: an educational case report .  Lattanzi JB, et al.  Phys Ther . 2011 Oct;91(10):1513-24.

Ideas, Editorials, Opinions Put forth by experts in the field.  Example : Health and health care for the 21st century: for all the people . Koop CE.  Am J Public Health . 2006 Dec;96(12):2090-2.

Animal Research Studies Studies conducted using animal subjects.  Example : Intranasal leptin reduces appetite and induces weight loss in rats with diet-induced obesity (DIO) .  Schulz C, Paulus K, Jöhren O, Lehnert H.   Endocrinology . 2012 Jan;153(1):143-53.

Test-tube Lab Research "Test tube" experiments conducted in a controlled laboratory setting.

Adapted from Study Designs. In NICHSR Introduction to Health Services Research: a Self-Study Course.  http://www.nlm.nih.gov/nichsr/ihcm/06studies/studies03.html and Glossary of EBM Terms. http://www.cebm.utoronto.ca/glossary/index.htm#top  

Study Design Terminology

Bias - Any deviation of results or inferences from the truth, or processes leading to such deviation. Bias can result from several sources: one-sided or systematic variations in measurement from the true value (systematic error); flaws in study design; deviation of inferences, interpretations, or analyses based on flawed data or data collection; etc. There is no sense of prejudice or subjectivity implied in the assessment of bias under these conditions.

Case Control Studies - Studies which start with the identification of persons with a disease of interest and a control (comparison, referent) group without the disease. The relationship of an attribute to the disease is examined by comparing diseased and non-diseased persons with regard to the frequency or levels of the attribute in each group.

Causality - The relating of causes to the effects they produce. Causes are termed necessary when they must always precede an effect and sufficient when they initiate or produce an effect. Any of several factors may be associated with the potential disease causation or outcome, including predisposing factors, enabling factors, precipitating factors, reinforcing factors, and risk factors.

Control Groups - Groups that serve as a standard for comparison in experimental studies. They are similar in relevant characteristics to the experimental group but do not receive the experimental intervention.

Controlled Clinical Trials - Clinical trials involving one or more test treatments, at least one control treatment, specified outcome measures for evaluating the studied intervention, and a bias-free method for assigning patients to the test treatment. The treatment may be drugs, devices, or procedures studied for diagnostic, therapeutic, or prophylactic effectiveness. Control measures include placebos, active medicines, no-treatment, dosage forms and regimens, historical comparisons, etc. When randomization using mathematical techniques, such as the use of a random numbers table, is employed to assign patients to test or control treatments, the trials are characterized as Randomized Controlled Trials.

Cost-Benefit Analysis - A method of comparing the cost of a program with its expected benefits in dollars (or other currency). The benefit-to-cost ratio is a measure of total return expected per unit of money spent. This analysis generally excludes consideration of factors that are not measured ultimately in economic terms. Cost effectiveness compares alternative ways to achieve a specific set of results.

Cross-Over Studies - Studies comparing two or more treatments or interventions in which the subjects or patients, upon completion of the course of one treatment, are switched to another. In the case of two treatments, A and B, half the subjects are randomly allocated to receive these in the order A, B and half to receive them in the order B, A. A criticism of this design is that effects of the first treatment may carry over into the period when the second is given.

Cross-Sectional Studies - Studies in which the presence or absence of disease or other health-related variables are determined in each member of the study population or in a representative sample at one particular time. This contrasts with LONGITUDINAL STUDIES which are followed over a period of time.

Double-Blind Method - A method of studying a drug or procedure in which both the subjects and investigators are kept unaware of who is actually getting which specific treatment.

Empirical Research - The study, based on direct observation, use of statistical records, interviews, or experimental methods, of actual practices or the actual impact of practices or policies.

Evaluation Studies - Works consisting of studies determining the effectiveness or utility of processes, personnel, and equipment.

Genome-Wide Association Study - An analysis comparing the allele frequencies of all available (or a whole genome representative set of) polymorphic markers in unrelated patients with a specific symptom or disease condition, and those of healthy controls to identify markers associated with a specific disease or condition.

Intention to Treat Analysis - Strategy for the analysis of Randomized Controlled Trial that compares patients in the groups to which they were originally randomly assigned.

Logistic Models - Statistical models which describe the relationship between a qualitative dependent variable (that is, one which can take only certain discrete values, such as the presence or absence of a disease) and an independent variable. A common application is in epidemiology for estimating an individual's risk (probability of a disease) as a function of a given risk factor.

Longitudinal Studies - Studies in which variables relating to an individual or group of individuals are assessed over a period of time.

Lost to Follow-Up - Study subjects in cohort studies whose outcomes are unknown e.g., because they could not or did not wish to attend follow-up visits.

Matched-Pair Analysis - A type of analysis in which subjects in a study group and a comparison group are made comparable with respect to extraneous factors by individually pairing study subjects with the comparison group subjects (e.g., age-matched controls).

Meta-Analysis - Works consisting of studies using a quantitative method of combining the results of independent studies (usually drawn from the published literature) and synthesizing summaries and conclusions which may be used to evaluate therapeutic effectiveness, plan new studies, etc. It is often an overview of clinical trials. It is usually called a meta-analysis by the author or sponsoring body and should be differentiated from reviews of literature.

Numbers Needed To Treat - Number of patients who need to be treated in order to prevent one additional bad outcome. It is the inverse of Absolute Risk Reduction.

Odds Ratio - The ratio of two odds. The exposure-odds ratio for case control data is the ratio of the odds in favor of exposure among cases to the odds in favor of exposure among noncases. The disease-odds ratio for a cohort or cross section is the ratio of the odds in favor of disease among the exposed to the odds in favor of disease among the unexposed. The prevalence-odds ratio refers to an odds ratio derived cross-sectionally from studies of prevalent cases.

Patient Selection - Criteria and standards used for the determination of the appropriateness of the inclusion of patients with specific conditions in proposed treatment plans and the criteria used for the inclusion of subjects in various clinical trials and other research protocols.

Predictive Value of Tests - In screening and diagnostic tests, the probability that a person with a positive test is a true positive (i.e., has the disease), is referred to as the predictive value of a positive test; whereas, the predictive value of a negative test is the probability that the person with a negative test does not have the disease. Predictive value is related to the sensitivity and specificity of the test.

Prospective Studies - Observation of a population for a sufficient number of persons over a sufficient number of years to generate incidence or mortality rates subsequent to the selection of the study group.

Qualitative Studies - Research that derives data from observation, interviews, or verbal interactions and focuses on the meanings and interpretations of the participants.

Quantitative Studies - Quantitative research is research that uses numerical analysis.

Random Allocation - A process involving chance used in therapeutic trials or other research endeavor for allocating experimental subjects, human or animal, between treatment and control groups, or among treatment groups. It may also apply to experiments on inanimate objects.

Randomized Controlled Trial - Clinical trials that involve at least one test treatment and one control treatment, concurrent enrollment and follow-up of the test- and control-treated groups, and in which the treatments to be administered are selected by a random process, such as the use of a random-numbers table.

Reproducibility of Results - The statistical reproducibility of measurements (often in a clinical context), including the testing of instrumentation or techniques to obtain reproducible results. The concept includes reproducibility of physiological measurements, which may be used to develop rules to assess probability or prognosis, or response to a stimulus; reproducibility of occurrence of a condition; and reproducibility of experimental results.

Retrospective Studies - Studies used to test etiologic hypotheses in which inferences about an exposure to putative causal factors are derived from data relating to characteristics of persons under study or to events or experiences in their past. The essential feature is that some of the persons under study have the disease or outcome of interest and their characteristics are compared with those of unaffected persons.

Sample Size - The number of units (persons, animals, patients, specified circumstances, etc.) in a population to be studied. The sample size should be big enough to have a high likelihood of detecting a true difference between two groups.

Sensitivity and Specificity - Binary classification measures to assess test results. Sensitivity or recall rate is the proportion of true positives. Specificity is the probability of correctly determining the absence of a condition.

Single-Blind Method - A method in which either the observer(s) or the subject(s) is kept ignorant of the group to which the subjects are assigned.

Time Factors - Elements of limited time intervals, contributing to particular results or situations.

Source:  NLM MeSH Database

• << Previous: How to Find Books
• Next: Types of Literature >>
• Last Updated: Aug 16, 2024 4:01 PM
• URL: https://research.library.gsu.edu/litrev

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings
• My Bibliography
• Collections
• Citation manager

Save citation to file

Email citation, add to collections.

• Create a new collection
• Add to an existing collection

Add to My Bibliography

Your saved search, create a file for external citation management software, your rss feed.

• Search in PubMed
• Search in NLM Catalog
• Add to Search

Study design: the basics

Affiliation.

• 1 Department of Community Health and Epidemiology, University of Saskatchewan College of Medicine, Saskatoon, Saskatchewan, Cancada.
• PMID: 18450042
• DOI: 10.1007/978-1-59745-530-5_1

In biomedical research, meaningful conclusions can only be drawn based on data collected from a valid scientific design using appropriate statistical methods. Therefore, the selection of an appropriate study design is important in order to provide an unbiased and scientific evaluation of the research questions. In this chapter, the different kinds of experimental studies commonly used in biology and medicine are introduced. A brief survey of basic experimental study designs, randomization, blinding, possible biases, issues in data analysis, and interpretation of the study results are mainly provided.

PubMed Disclaimer

Similar articles

• [Methodological basis for evidence-based medicine]. Windeler J. Windeler J. Gesundheitswesen. 2008 Jul;70(7):418-27; quiz 428. doi: 10.1055/s-2007-986350. Gesundheitswesen. 2008. PMID: 18729032 Review. German. No abstract available.
• The advantages and disadvantages of adaptive designs for clinical trials. Bauer P, Brannath W. Bauer P, et al. Drug Discov Today. 2004 Apr 15;9(8):351-7. doi: 10.1016/S1359-6446(04)03023-5. Drug Discov Today. 2004. PMID: 15081962 Review.
• Designs for efficient clinical trials. Simon R. Simon R. Oncology (Williston Park). 1989 Jul;3(7):43-9; discussion 51-3. Oncology (Williston Park). 1989. PMID: 2701811 Review.
• Real world research. Knottnerus JA, Tugwell P. Knottnerus JA, et al. J Clin Epidemiol. 2010 Oct;63(10):1051-2. doi: 10.1016/j.jclinepi.2010.08.001. J Clin Epidemiol. 2010. PMID: 20728043 No abstract available.
• [Application of the combined use of uniform experimental design and orthogonal experimental design in biomedicial engineering]. Tang C, Cai S. Tang C, et al. Sheng Wu Yi Xue Gong Cheng Xue Za Zhi. 2006 Dec;23(6):1228-31. Sheng Wu Yi Xue Gong Cheng Xue Za Zhi. 2006. PMID: 17228714 Chinese.
• Clinical Research: A Review of Study Designs, Hypotheses, Errors, Sampling Types, Ethics, and Informed Consent. Purna Singh A, Vadakedath S, Kandi V. Purna Singh A, et al. Cureus. 2023 Jan 4;15(1):e33374. doi: 10.7759/cureus.33374. eCollection 2023 Jan. Cureus. 2023. PMID: 36751199 Free PMC article. Review.
• Comment on "Significant Contribution of Spanish Dermatology Toward Understanding COVID-19: A Bibliometric Study of PubMed-Indexed Articles". Pulido M. Pulido M. Actas Dermosifiliogr. 2022 Sep;113(8):840-841. doi: 10.1016/j.ad.2022.03.006. Epub 2022 Apr 27. Actas Dermosifiliogr. 2022. PMID: 35489405 Free PMC article. English, Spanish. No abstract available.
• Best Practices for Microbiome Study Design in Companion Animal Research. Jarett JK, Kingsbury DD, Dahlhausen KE, Ganz HH. Jarett JK, et al. Front Vet Sci. 2021 Apr 9;8:644836. doi: 10.3389/fvets.2021.644836. eCollection 2021. Front Vet Sci. 2021. PMID: 33898544 Free PMC article. Review.
• Clinical research study designs: The essentials. Chidambaram AG, Josephson M. Chidambaram AG, et al. Pediatr Investig. 2019 Dec 21;3(4):245-252. doi: 10.1002/ped4.12166. eCollection 2019 Dec. Pediatr Investig. 2019. PMID: 32851330 Free PMC article.

Publication types

• Search in MeSH

LinkOut - more resources

Full text sources.

• MedlinePlus Health Information
• Citation Manager

NCBI Literature Resources

MeSH PMC Bookshelf Disclaimer

The PubMed wordmark and PubMed logo are registered trademarks of the U.S. Department of Health and Human Services (HHS). Unauthorized use of these marks is strictly prohibited.

Organizing Your Social Sciences Research Paper: Types of Research Designs

• Purpose of Guide
• Writing a Research Proposal
• Design Flaws to Avoid
• Independent and Dependent Variables
• Narrowing a Topic Idea
• Broadening a Topic Idea
• The Research Problem/Question
• Academic Writing Style
• Choosing a Title
• Making an Outline
• Paragraph Development
• The C.A.R.S. Model
• Background Information
• Theoretical Framework
• Citation Tracking
• Evaluating Sources
• Reading Research Effectively
• Primary Sources
• Secondary Sources
• What Is Scholarly vs. Popular?
• Is it Peer-Reviewed?
• Qualitative Methods
• Quantitative Methods
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism [linked guide]
• Annotated Bibliography
• Grading Someone Else's Paper

Introduction

Before beginning your paper, you need to decide how you plan to design the study .

The research design refers to the overall strategy that you choose to integrate the different components of the study in a coherent and logical way, thereby, ensuring you will effectively address the research problem; it constitutes the blueprint for the collection, measurement, and analysis of data. Note that your research problem determines the type of design you should use, not the other way around!

De Vaus, D. A. Research Design in Social Research . London: SAGE, 2001; Trochim, William M.K. Research Methods Knowledge Base . 2006.

General Structure and Writing Style

The function of a research design is to ensure that the evidence obtained enables you to effectively address the research problem logically and as unambiguously as possible . In social sciences research, obtaining information relevant to the research problem generally entails specifying the type of evidence needed to test a theory, to evaluate a program, or to accurately describe and assess meaning related to an observable phenomenon.

With this in mind, a common mistake made by researchers is that they begin their investigations far too early, before they have thought critically about what information is required to address the research problem. Without attending to these design issues beforehand, the overall research problem will not be adequately addressed and any conclusions drawn will run the risk of being weak and unconvincing. As a consequence, the overall validity of the study will be undermined.

The length and complexity of describing research designs in your paper can vary considerably, but any well-developed design will achieve the following :

• Identify the research problem clearly and justify its selection, particularly in relation to any valid alternative designs that could have been used,
• Review and synthesize previously published literature associated with the research problem,
• Clearly and explicitly specify hypotheses [i.e., research questions] central to the problem,
• Effectively describe the data which will be necessary for an adequate testing of the hypotheses and explain how such data will be obtained, and
• Describe the methods of analysis to be applied to the data in determining whether or not the hypotheses are true or false.

The research design is usually incorporated into the introduction and varies in length depending on the type of design you are using. However, you can get a sense of what to do by reviewing the literature of studies that have utilized the same research design. This can provide an outline to follow for your own paper.

NOTE : Use the SAGE Research Methods Online and Cases and the SAGE Research Methods Videos databases to search for scholarly resources on how to apply specific research designs and methods . The Research Methods Online database contains links to more than 175,000 pages of SAGE publisher's book, journal, and reference content on quantitative, qualitative, and mixed research methodologies. Also included is a collection of case studies of social research projects that can be used to help you better understand abstract or complex methodological concepts. The Research Methods Videos database contains hours of tutorials, interviews, video case studies, and mini-documentaries covering the entire research process.

Creswell, John W. and J. David Creswell. Research Design: Qualitative, Quantitative, and Mixed Methods Approaches . 5th edition. Thousand Oaks, CA: Sage, 2018; De Vaus, D. A. Research Design in Social Research . London: SAGE, 2001; Gorard, Stephen. Research Design: Creating Robust Approaches for the Social Sciences . Thousand Oaks, CA: Sage, 2013; Leedy, Paul D. and Jeanne Ellis Ormrod. Practical Research: Planning and Design . Tenth edition. Boston, MA: Pearson, 2013; Vogt, W. Paul, Dianna C. Gardner, and Lynne M. Haeffele. When to Use What Research Design . New York: Guilford, 2012.

Videos in Business and Management , Criminology and Criminal Justice , Education , and Media, Communication and Cultural Studies specifically created for use in higher education.

A literature review tool that highlights the most influential works in Business & Management, Education, Politics & International Relations, Psychology and Sociology. Does not contain full text of the cited works. Dates vary.

Encyclopedias, handbooks, ebooks, and videos published by Sage and CQ Press. 2000 to present

Causal Design

Definition and Purpose

Causality studies may be thought of as understanding a phenomenon in terms of conditional statements in the form, “If X, then Y.” This type of research is used to measure what impact a specific change will have on existing norms and assumptions. Most social scientists seek causal explanations that reflect tests of hypotheses. Causal effect (nomothetic perspective) occurs when variation in one phenomenon, an independent variable, leads to or results, on average, in variation in another phenomenon, the dependent variable.

Conditions necessary for determining causality:

• Empirical association -- a valid conclusion is based on finding an association between the independent variable and the dependent variable.
• Appropriate time order -- to conclude that causation was involved, one must see that cases were exposed to variation in the independent variable before variation in the dependent variable.
• Nonspuriousness -- a relationship between two variables that is not due to variation in a third variable.

What do these studies tell you ?

• Causality research designs assist researchers in understanding why the world works the way it does through the process of proving a causal link between variables and by the process of eliminating other possibilities.
• Replication is possible.
• There is greater confidence the study has internal validity due to the systematic subject selection and equity of groups being compared.

What these studies don't tell you ?

• Not all relationships are casual! The possibility always exists that, by sheer coincidence, two unrelated events appear to be related [e.g., Punxatawney Phil could accurately predict the duration of Winter for five consecutive years but, the fact remains, he's just a big, furry rodent].
• Conclusions about causal relationships are difficult to determine due to a variety of extraneous and confounding variables that exist in a social environment. This means causality can only be inferred, never proven.
• If two variables are correlated, the cause must come before the effect. However, even though two variables might be causally related, it can sometimes be difficult to determine which variable comes first and, therefore, to establish which variable is the actual cause and which is the  actual effect.

Beach, Derek and Rasmus Brun Pedersen. Causal Case Study Methods: Foundations and Guidelines for Comparing, Matching, and Tracing . Ann Arbor, MI: University of Michigan Press, 2016; Bachman, Ronet. The Practice of Research in Criminology and Criminal Justice . Chapter 5, Causation and Research Designs. 3rd ed. Thousand Oaks, CA: Pine Forge Press, 2007; Brewer, Ernest W. and Jennifer Kubn. “Causal-Comparative Design.” In Encyclopedia of Research Design . Neil J. Salkind, editor. (Thousand Oaks, CA: Sage, 2010), pp. 125-132; Causal Research Design: Experimentation. Anonymous SlideShare Presentation ; Gall, Meredith. Educational Research: An Introduction . Chapter 11, Nonexperimental Research: Correlational Designs. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007; Trochim, William M.K. Research Methods Knowledge Base . 2006.

Cohort Design

Often used in the medical sciences, but also found in the applied social sciences, a cohort study generally refers to a study conducted over a period of time involving members of a population which the subject or representative member comes from, and who are united by some commonality or similarity. Using a quantitative framework, a cohort study makes note of statistical occurrence within a specialized subgroup, united by same or similar characteristics that are relevant to the research problem being investigated, r ather than studying statistical occurrence within the general population. Using a qualitative framework, cohort studies generally gather data using methods of observation. Cohorts can be either "open" or "closed."

• Open Cohort Studies [dynamic populations, such as the population of Los Angeles] involve a population that is defined just by the state of being a part of the study in question (and being monitored for the outcome). Date of entry and exit from the study is individually defined, therefore, the size of the study population is not constant. In open cohort studies, researchers can only calculate rate based data, such as, incidence rates and variants thereof.
• Closed Cohort Studies [static populations, such as patients entered into a clinical trial] involve participants who enter into the study at one defining point in time and where it is presumed that no new participants can enter the cohort. Given this, the number of study participants remains constant (or can only decrease).
• The use of cohorts is often mandatory because a randomized control study may be unethical. For example, you cannot deliberately expose people to asbestos, you can only study its effects on those who have already been exposed. Research that measures risk factors often relies upon cohort designs.
• Because cohort studies measure potential causes before the outcome has occurred, they can demonstrate that these “causes” preceded the outcome, thereby avoiding the debate as to which is the cause and which is the effect.
• Cohort analysis is highly flexible and can provide insight into effects over time and related to a variety of different types of changes [e.g., social, cultural, political, economic, etc.].
• Either original data or secondary data can be used in this design.
• In cases where a comparative analysis of two cohorts is made [e.g., studying the effects of one group exposed to asbestos and one that has not], a researcher cannot control for all other factors that might differ between the two groups. These factors are known as confounding variables.
• Cohort studies can end up taking a long time to complete if the researcher must wait for the conditions of interest to develop within the group. This also increases the chance that key variables change during the course of the study, potentially impacting the validity of the findings.
• Due to the lack of randominization in the cohort design, its external validity is lower than that of study designs where the researcher randomly assigns participants.

Healy P, Devane D. “Methodological Considerations in Cohort Study Designs.” Nurse Researcher 18 (2011): 32-36; Glenn, Norval D, editor. Cohort Analysis . 2nd edition. Thousand Oaks, CA: Sage, 2005; Levin, Kate Ann. Study Design IV: Cohort Studies. Evidence-Based Dentistry 7 (2003): 51–52; Payne, Geoff. “Cohort Study.” In The SAGE Dictionary of Social Research Methods . Victor Jupp, editor. (Thousand Oaks, CA: Sage, 2006), pp. 31-33; Study Design 101 . Himmelfarb Health Sciences Library. George Washington University, November 2011; Cohort Study . Wikipedia.

Cross-Sectional Design

Cross-sectional research designs have three distinctive features: no time dimension; a reliance on existing differences rather than change following intervention; and, groups are selected based on existing differences rather than random allocation. The cross-sectional design can only measure differences between or from among a variety of people, subjects, or phenomena rather than a process of change. As such, researchers using this design can only employ a relatively passive approach to making causal inferences based on findings.

• Cross-sectional studies provide a clear 'snapshot' of the outcome and the characteristics associated with it, at a specific point in time.
• Unlike an experimental design, where there is an active intervention by the researcher to produce and measure change or to create differences, cross-sectional designs focus on studying and drawing inferences from existing differences between people, subjects, or phenomena.
• Entails collecting data at and concerning one point in time. While longitudinal studies involve taking multiple measures over an extended period of time, cross-sectional research is focused on finding relationships between variables at one moment in time.
• Groups identified for study are purposely selected based upon existing differences in the sample rather than seeking random sampling.
• Cross-section studies are capable of using data from a large number of subjects and, unlike observational studies, is not geographically bound.
• Can estimate prevalence of an outcome of interest because the sample is usually taken from the whole population.
• Because cross-sectional designs generally use survey techniques to gather data, they are relatively inexpensive and take up little time to conduct.
• Finding people, subjects, or phenomena to study that are very similar except in one specific variable can be difficult.
• Results are static and time bound and, therefore, give no indication of a sequence of events or reveal historical or temporal contexts.
• Studies cannot be utilized to establish cause and effect relationships.
• This design only provides a snapshot of analysis so there is always the possibility that a study could have differing results if another time-frame had been chosen.
• There is no follow up to the findings.

Bethlehem, Jelke. "7: Cross-sectional Research." In Research Methodology in the Social, Behavioural and Life Sciences . Herman J Adèr and Gideon J Mellenbergh, editors. (London, England: Sage, 1999), pp. 110-43; Bourque, Linda B. “Cross-Sectional Design.” In  The SAGE Encyclopedia of Social Science Research Methods . Michael S. Lewis-Beck, Alan Bryman, and Tim Futing Liao. (Thousand Oaks, CA: 2004), pp. 230-231; Hall, John. “Cross-Sectional Survey Design.” In Encyclopedia of Survey Research Methods . Paul J. Lavrakas, ed. (Thousand Oaks, CA: Sage, 2008), pp. 173-174; Helen Barratt, Maria Kirwan. Cross-Sectional Studies: Design, Application, Strengths and Weaknesses of Cross-Sectional Studies . Healthknowledge, 2009. Cross-Sectional Study . Wikipedia.

Descriptive Design

Descriptive research designs help provide answers to the questions of who, what, when, where, and how associated with a particular research problem; a descriptive study cannot conclusively ascertain answers to why. Descriptive research is used to obtain information concerning the current status of the phenomena and to describe "what exists" with respect to variables or conditions in a situation.

• The subject is being observed in a completely natural and unchanged natural environment. True experiments, whilst giving analyzable data, often adversely influence the normal behavior of the subject [a.k.a., the Heisenberg effect whereby measurements of certain systems cannot be made without affecting the systems].
• Descriptive research is often used as a pre-cursor to more quantitative research designs with the general overview giving some valuable pointers as to what variables are worth testing quantitatively.
• If the limitations are understood, they can be a useful tool in developing a more focused study.
• Descriptive studies can yield rich data that lead to important recommendations in practice.
• Appoach collects a large amount of data for detailed analysis.
• The results from a descriptive research cannot be used to discover a definitive answer or to disprove a hypothesis.
• Because descriptive designs often utilize observational methods [as opposed to quantitative methods], the results cannot be replicated.
• The descriptive function of research is heavily dependent on instrumentation for measurement and observation.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 5, Flexible Methods: Descriptive Research. 2nd ed. New York: Columbia University Press, 1999; Given, Lisa M. "Descriptive Research." In Encyclopedia of Measurement and Statistics . Neil J. Salkind and Kristin Rasmussen, editors. (Thousand Oaks, CA: Sage, 2007), pp. 251-254; McNabb, Connie. Descriptive Research Methodologies . Powerpoint Presentation; Shuttleworth, Martyn. Descriptive Research Design , September 26, 2008. Explorable.com website.

Experimental Design

A blueprint of the procedure that enables the researcher to maintain control over all factors that may affect the result of an experiment. In doing this, the researcher attempts to determine or predict what may occur. Experimental research is often used where there is time priority in a causal relationship (cause precedes effect), there is consistency in a causal relationship (a cause will always lead to the same effect), and the magnitude of the correlation is great. The classic experimental design specifies an experimental group and a control group. The independent variable is administered to the experimental group and not to the control group, and both groups are measured on the same dependent variable. Subsequent experimental designs have used more groups and more measurements over longer periods. True experiments must have control, randomization, and manipulation.

• Experimental research allows the researcher to control the situation. In so doing, it allows researchers to answer the question, “What causes something to occur?”
• Permits the researcher to identify cause and effect relationships between variables and to distinguish placebo effects from treatment effects.
• Experimental research designs support the ability to limit alternative explanations and to infer direct causal relationships in the study.
• Approach provides the highest level of evidence for single studies.
• The design is artificial, and results may not generalize well to the real world.
• The artificial settings of experiments may alter the behaviors or responses of participants.
• Experimental designs can be costly if special equipment or facilities are needed.
• Some research problems cannot be studied using an experiment because of ethical or technical reasons.
• Difficult to apply ethnographic and other qualitative methods to experimentally designed studies.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 7, Flexible Methods: Experimental Research. 2nd ed. New York: Columbia University Press, 1999; Chapter 2: Research Design, Experimental Designs . School of Psychology, University of New England, 2000; Chow, Siu L. "Experimental Design." In Encyclopedia of Research Design . Neil J. Salkind, editor. (Thousand Oaks, CA: Sage, 2010), pp. 448-453; "Experimental Design." In Social Research Methods . Nicholas Walliman, editor. (London, England: Sage, 2006), pp, 101-110; Experimental Research . Research Methods by Dummies. Department of Psychology. California State University, Fresno, 2006; Kirk, Roger E. Experimental Design: Procedures for the Behavioral Sciences . 4th edition. Thousand Oaks, CA: Sage, 2013; Trochim, William M.K. Experimental Design . Research Methods Knowledge Base. 2006; Rasool, Shafqat. Experimental Research . Slideshare presentation.

Exploratory Design

An exploratory design is conducted about a research problem when there are few or no earlier studies to refer to or rely upon to predict an outcome . The focus is on gaining insights and familiarity for later investigation or undertaken when research problems are in a preliminary stage of investigation. Exploratory designs are often used to establish an understanding of how best to proceed in studying an issue or what methodology would effectively apply to gathering information about the issue.

The goals of exploratory research are intended to produce the following possible insights:

• Familiarity with basic details, settings, and concerns.
• Well grounded picture of the situation being developed.
• Generation of new ideas and assumptions.
• Development of tentative theories or hypotheses.
• Determination about whether a study is feasible in the future.
• Issues get refined for more systematic investigation and formulation of new research questions.
• Direction for future research and techniques get developed.
• Design is a useful approach for gaining background information on a particular topic.
• Exploratory research is flexible and can address research questions of all types (what, why, how).
• Provides an opportunity to define new terms and clarify existing concepts.
• Exploratory research is often used to generate formal hypotheses and develop more precise research problems.
• In the policy arena or applied to practice, exploratory studies help establish research priorities and where resources should be allocated.
• Exploratory research generally utilizes small sample sizes and, thus, findings are typically not generalizable to the population at large.
• The exploratory nature of the research inhibits an ability to make definitive conclusions about the findings. They provide insight but not definitive conclusions.
• The research process underpinning exploratory studies is flexible but often unstructured, leading to only tentative results that have limited value to decision-makers.
• Design lacks rigorous standards applied to methods of data gathering and analysis because one of the areas for exploration could be to determine what method or methodologies could best fit the research problem.

Cuthill, Michael. “Exploratory Research: Citizen Participation, Local Government, and Sustainable Development in Australia.” Sustainable Development 10 (2002): 79-89; Streb, Christoph K. "Exploratory Case Study." In Encyclopedia of Case Study Research . Albert J. Mills, Gabrielle Durepos and Eiden Wiebe, editors. (Thousand Oaks, CA: Sage, 2010), pp. 372-374; Taylor, P. J., G. Catalano, and D.R.F. Walker. “Exploratory Analysis of the World City Network.” Urban Studies 39 (December 2002): 2377-2394; Exploratory Research . Wikipedia.

Historical Design

The purpose of a historical research design is to collect, verify, and synthesize evidence from the past to establish facts that defend or refute a hypothesis. It uses secondary sources and a variety of primary documentary evidence, such as, diaries, official records, reports, archives, and non-textual information [maps, pictures, audio and visual recordings]. The limitation is that the sources must be both authentic and valid.

• The historical research design is unobtrusive; the act of research does not affect the results of the study.
• The historical approach is well suited for trend analysis.
• Historical records can add important contextual background required to more fully understand and interpret a research problem.
• There is often no possibility of researcher-subject interaction that could affect the findings.
• Historical sources can be used over and over to study different research problems or to replicate a previous study.
• The ability to fulfill the aims of your research are directly related to the amount and quality of documentation available to understand the research problem.
• Since historical research relies on data from the past, there is no way to manipulate it to control for contemporary contexts.
• Interpreting historical sources can be very time consuming.
• The sources of historical materials must be archived consistently to ensure access. This may especially challenging for digital or online-only sources.
• Original authors bring their own perspectives and biases to the interpretation of past events and these biases are more difficult to ascertain in historical resources.
• Due to the lack of control over external variables, historical research is very weak with regard to the demands of internal validity.
• It is rare that the entirety of historical documentation needed to fully address a research problem is available for interpretation, therefore, gaps need to be acknowledged.

Howell, Martha C. and Walter Prevenier. From Reliable Sources: An Introduction to Historical Methods . Ithaca, NY: Cornell University Press, 2001; Lundy, Karen Saucier. "Historical Research." In The Sage Encyclopedia of Qualitative Research Methods . Lisa M. Given, editor. (Thousand Oaks, CA: Sage, 2008), pp. 396-400; Marius, Richard. and Melvin E. Page. A Short Guide to Writing about History . 9th edition. Boston, MA: Pearson, 2015; Savitt, Ronald. “Historical Research in Marketing.” Journal of Marketing 44 (Autumn, 1980): 52-58;  Gall, Meredith. Educational Research: An Introduction . Chapter 16, Historical Research. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007.

Longitudinal Design

A longitudinal study follows the same sample over time and makes repeated observations. For example, with longitudinal surveys, the same group of people is interviewed at regular intervals, enabling researchers to track changes over time and to relate them to variables that might explain why the changes occur. Longitudinal research designs describe patterns of change and help establish the direction and magnitude of causal relationships. Measurements are taken on each variable over two or more distinct time periods. This allows the researcher to measure change in variables over time. It is a type of observational study sometimes referred to as a panel study.

• Longitudinal data facilitate the analysis of the duration of a particular phenomenon.
• Enables survey researchers to get close to the kinds of causal explanations usually attainable only with experiments.
• The design permits the measurement of differences or change in a variable from one period to another [i.e., the description of patterns of change over time].
• Longitudinal studies facilitate the prediction of future outcomes based upon earlier factors.
• The data collection method may change over time.
• Maintaining the integrity of the original sample can be difficult over an extended period of time.
• It can be difficult to show more than one variable at a time.
• This design often needs qualitative research data to explain fluctuations in the results.
• A longitudinal research design assumes present trends will continue unchanged.
• It can take a long period of time to gather results.
• There is a need to have a large sample size and accurate sampling to reach representativness.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 6, Flexible Methods: Relational and Longitudinal Research. 2nd ed. New York: Columbia University Press, 1999; Forgues, Bernard, and Isabelle Vandangeon-Derumez. "Longitudinal Analyses." In Doing Management Research . Raymond-Alain Thiétart and Samantha Wauchope, editors. (London, England: Sage, 2001), pp. 332-351; Kalaian, Sema A. and Rafa M. Kasim. "Longitudinal Studies." In Encyclopedia of Survey Research Methods . Paul J. Lavrakas, ed. (Thousand Oaks, CA: Sage, 2008), pp. 440-441; Menard, Scott, editor. Longitudinal Research . Thousand Oaks, CA: Sage, 2002; Ployhart, Robert E. and Robert J. Vandenberg. "Longitudinal Research: The Theory, Design, and Analysis of Change.” Journal of Management 36 (January 2010): 94-120; Longitudinal Study . Wikipedia.

Mixed-Method Design

• Narrative and non-textual information can add meaning to numeric data, while numeric data can add precision to narrative and non-textual information.
• Can utilize existing data while at the same time generating and testing a grounded theory approach to describe and explain the phenomenon under study.
• A broader, more complex research problem can be investigated because the researcher is not constrained by using only one method.
• The strengths of one method can be used to overcome the inherent weaknesses of another method.
• Can provide stronger, more robust evidence to support a conclusion or set of recommendations.
• May generate new knowledge new insights or uncover hidden insights, patterns, or relationships that a single methodological approach might not reveal.
• Produces more complete knowledge and understanding of the research problem that can be used to increase the generalizability of findings applied to theory or practice.
• A researcher must be proficient in understanding how to apply multiple methods to investigating a research problem as well as be proficient in optimizing how to design a study that coherently melds them together.
• Can increase the likelihood of conflicting results or ambiguous findings that inhibit drawing a valid conclusion or setting forth a recommended course of action [e.g., sample interview responses do not support existing statistical data].
• Because the research design can be very complex, reporting the findings requires a well-organized narrative, clear writing style, and precise word choice.
• Design invites collaboration among experts. However, merging different investigative approaches and writing styles requires more attention to the overall research process than studies conducted using only one methodological paradigm.
• Concurrent merging of quantitative and qualitative research requires greater attention to having adequate sample sizes, using comparable samples, and applying a consistent unit of analysis. For sequential designs where one phase of qualitative research builds on the quantitative phase or vice versa, decisions about what results from the first phase to use in the next phase, the choice of samples and estimating reasonable sample sizes for both phases, and the interpretation of results from both phases can be difficult.
• Due to multiple forms of data being collected and analyzed, this design requires extensive time and resources to carry out the multiple steps involved in data gathering and interpretation.

Burch, Patricia and Carolyn J. Heinrich. Mixed Methods for Policy Research and Program Evaluation . Thousand Oaks, CA: Sage, 2016; Creswell, John w. et al. Best Practices for Mixed Methods Research in the Health Sciences . Bethesda, MD: Office of Behavioral and Social Sciences Research, National Institutes of Health, 2010Creswell, John W. Research Design: Qualitative, Quantitative, and Mixed Methods Approaches . 4th edition. Thousand Oaks, CA: Sage Publications, 2014; Domínguez, Silvia, editor. Mixed Methods Social Networks Research . Cambridge, UK: Cambridge University Press, 2014; Hesse-Biber, Sharlene Nagy. Mixed Methods Research: Merging Theory with Practice . New York: Guilford Press, 2010; Niglas, Katrin. “How the Novice Researcher Can Make Sense of Mixed Methods Designs.” International Journal of Multiple Research Approaches 3 (2009): 34-46; Onwuegbuzie, Anthony J. and Nancy L. Leech. “Linking Research Questions to Mixed Methods Data Analysis Procedures.” The Qualitative Report 11 (September 2006): 474-498; Tashakorri, Abbas and John W. Creswell. “The New Era of Mixed Methods.” Journal of Mixed Methods Research 1 (January 2007): 3-7; Zhanga, Wanqing. “Mixed Methods Application in Health Intervention Research: A Multiple Case Study.” International Journal of Multiple Research Approaches 8 (2014): 24-35 .

Observational Design

This type of research design draws a conclusion by comparing subjects against a control group, in cases where the researcher has no control over the experiment. There are two general types of observational designs. In direct observations, people know that you are watching them. Unobtrusive measures involve any method for studying behavior where individuals do not know they are being observed. An observational study allows a useful insight into a phenomenon and avoids the ethical and practical difficulties of setting up a large and cumbersome research project.

• Observational studies are usually flexible and do not necessarily need to be structured around a hypothesis about what you expect to observe [data is emergent rather than pre-existing].
• The researcher is able to collect in-depth information about a particular behavior.
• Can reveal interrelationships among multifaceted dimensions of group interactions.
• You can generalize your results to real life situations.
• Observational research is useful for discovering what variables may be important before applying other methods like experiments.
• Observation research designs account for the complexity of group behaviors.
• Reliability of data is low because seeing behaviors occur over and over again may be a time consuming task and are difficult to replicate.
• In observational research, findings may only reflect a unique sample population and, thus, cannot be generalized to other groups.
• There can be problems with bias as the researcher may only "see what they want to see."
• There is no possibility to determine "cause and effect" relationships since nothing is manipulated.
• Sources or subjects may not all be equally credible.
• Any group that is knowingly studied is altered to some degree by the presence of the researcher, therefore, potentially skewing any data collected.

Atkinson, Paul and Martyn Hammersley. “Ethnography and Participant Observation.” In Handbook of Qualitative Research . Norman K. Denzin and Yvonna S. Lincoln, eds. (Thousand Oaks, CA: Sage, 1994), pp. 248-261; Observational Research . Research Methods by Dummies. Department of Psychology. California State University, Fresno, 2006; Patton Michael Quinn. Qualitiative Research and Evaluation Methods . Chapter 6, Fieldwork Strategies and Observational Methods. 3rd ed. Thousand Oaks, CA: Sage, 2002; Payne, Geoff and Judy Payne. "Observation." In Key Concepts in Social Research . The SAGE Key Concepts series. (London, England: Sage, 2004), pp. 158-162; Rosenbaum, Paul R. Design of Observational Studies . New York: Springer, 2010;Williams, J. Patrick. "Nonparticipant Observation." In The Sage Encyclopedia of Qualitative Research Methods . Lisa M. Given, editor.(Thousand Oaks, CA: Sage, 2008), pp. 562-563.

• << Previous: Writing a Research Proposal
• Next: Design Flaws to Avoid >>
• Last Updated: Sep 8, 2023 12:19 PM
• URL: https://guides.library.txstate.edu/socialscienceresearch

How to Write a Research Proposal: (with Examples & Templates)

Table of Contents

Before conducting a study, a research proposal should be created that outlines researchers’ plans and methodology and is submitted to the concerned evaluating organization or person. Creating a research proposal is an important step to ensure that researchers are on track and are moving forward as intended. A research proposal can be defined as a detailed plan or blueprint for the proposed research that you intend to undertake. It provides readers with a snapshot of your project by describing what you will investigate, why it is needed, and how you will conduct the research.  

Your research proposal should aim to explain to the readers why your research is relevant and original, that you understand the context and current scenario in the field, have the appropriate resources to conduct the research, and that the research is feasible given the usual constraints.  

This article will describe in detail the purpose and typical structure of a research proposal , along with examples and templates to help you ace this step in your research journey.  

What is a Research Proposal ?  

A research proposal¹ ,²  can be defined as a formal report that describes your proposed research, its objectives, methodology, implications, and other important details. Research proposals are the framework of your research and are used to obtain approvals or grants to conduct the study from various committees or organizations. Consequently, research proposals should convince readers of your study’s credibility, accuracy, achievability, practicality, and reproducibility.   

With research proposals , researchers usually aim to persuade the readers, funding agencies, educational institutions, and supervisors to approve the proposal. To achieve this, the report should be well structured with the objectives written in clear, understandable language devoid of jargon. A well-organized research proposal conveys to the readers or evaluators that the writer has thought out the research plan meticulously and has the resources to ensure timely completion.  

Purpose of Research Proposals  

A research proposal is a sales pitch and therefore should be detailed enough to convince your readers, who could be supervisors, ethics committees, universities, etc., that what you’re proposing has merit and is feasible . Research proposals can help students discuss their dissertation with their faculty or fulfill course requirements and also help researchers obtain funding. A well-structured proposal instills confidence among readers about your ability to conduct and complete the study as proposed.  

Research proposals can be written for several reasons:³  

• To describe the importance of research in the specific topic  
• Address any potential challenges you may encounter  
• Showcase knowledge in the field and your ability to conduct a study  
• Apply for a role at a research institute  
• Convince a research supervisor or university that your research can satisfy the requirements of a degree program  
• Highlight the importance of your research to organizations that may sponsor your project  
• Identify implications of your project and how it can benefit the audience  

What Goes in a Research Proposal?    

Research proposals should aim to answer the three basic questions—what, why, and how.  

The What question should be answered by describing the specific subject being researched. It should typically include the objectives, the cohort details, and the location or setting.  

The Why question should be answered by describing the existing scenario of the subject, listing unanswered questions, identifying gaps in the existing research, and describing how your study can address these gaps, along with the implications and significance.  

The How question should be answered by describing the proposed research methodology, data analysis tools expected to be used, and other details to describe your proposed methodology.   

Research Proposal Example  

Here is a research proposal sample template (with examples) from the University of Rochester Medical Center. 4 The sections in all research proposals are essentially the same although different terminology and other specific sections may be used depending on the subject.  

Structure of a Research Proposal  

If you want to know how to make a research proposal impactful, include the following components:¹  

1. Introduction  

This section provides a background of the study, including the research topic, what is already known about it and the gaps, and the significance of the proposed research.  

2. Literature review  

This section contains descriptions of all the previous relevant studies pertaining to the research topic. Every study cited should be described in a few sentences, starting with the general studies to the more specific ones. This section builds on the understanding gained by readers in the Introduction section and supports it by citing relevant prior literature, indicating to readers that you have thoroughly researched your subject.  

3. Objectives  

Once the background and gaps in the research topic have been established, authors must now state the aims of the research clearly. Hypotheses should be mentioned here. This section further helps readers understand what your study’s specific goals are.  

4. Research design and methodology  

Here, authors should clearly describe the methods they intend to use to achieve their proposed objectives. Important components of this section include the population and sample size, data collection and analysis methods and duration, statistical analysis software, measures to avoid bias (randomization, blinding), etc.  

5. Ethical considerations  

This refers to the protection of participants’ rights, such as the right to privacy, right to confidentiality, etc. Researchers need to obtain informed consent and institutional review approval by the required authorities and mention this clearly for transparency.  

6. Budget/funding  

Researchers should prepare their budget and include all expected expenditures. An additional allowance for contingencies such as delays should also be factored in.  

7. Appendices  

This section typically includes information that supports the research proposal and may include informed consent forms, questionnaires, participant information, measurement tools, etc.  

8. Citations  

Important Tips for Writing a Research Proposal  

Writing a research proposal begins much before the actual task of writing. Planning the research proposal structure and content is an important stage, which if done efficiently, can help you seamlessly transition into the writing stage. 3,5  

The Planning Stage  

• Manage your time efficiently. Plan to have the draft version ready at least two weeks before your deadline and the final version at least two to three days before the deadline.
• What is the primary objective of your research?  
• Will your research address any existing gap?  
• What is the impact of your proposed research?  
• Do people outside your field find your research applicable in other areas?  
• If your research is unsuccessful, would there still be other useful research outcomes?  

  The Writing Stage  

• Create an outline with main section headings that are typically used.  
• Focus only on writing and getting your points across without worrying about the format of the research proposal , grammar, punctuation, etc. These can be fixed during the subsequent passes. Add details to each section heading you created in the beginning.   
• Ensure your sentences are concise and use plain language. A research proposal usually contains about 2,000 to 4,000 words or four to seven pages.  
• Don’t use too many technical terms and abbreviations assuming that the readers would know them. Define the abbreviations and technical terms.  
• Ensure that the entire content is readable. Avoid using long paragraphs because they affect the continuity in reading. Break them into shorter paragraphs and introduce some white space for readability.  
• Focus on only the major research issues and cite sources accordingly. Don’t include generic information or their sources in the literature review.  
• Proofread your final document to ensure there are no grammatical errors so readers can enjoy a seamless, uninterrupted read.  
• Use academic, scholarly language because it brings formality into a document.  
• Ensure that your title is created using the keywords in the document and is neither too long and specific nor too short and general.  
• Cite all sources appropriately to avoid plagiarism.  
• Make sure that you follow guidelines, if provided. This includes rules as simple as using a specific font or a hyphen or en dash between numerical ranges.  
• Ensure that you’ve answered all questions requested by the evaluating authority.  

Key Takeaways   

Here’s a summary of the main points about research proposals discussed in the previous sections:  

• A research proposal is a document that outlines the details of a proposed study and is created by researchers to submit to evaluators who could be research institutions, universities, faculty, etc.  
• Research proposals are usually about 2,000-4,000 words long, but this depends on the evaluating authority’s guidelines.  
• A good research proposal ensures that you’ve done your background research and assessed the feasibility of the research.  
• Research proposals have the following main sections—introduction, literature review, objectives, methodology, ethical considerations, and budget.  

Frequently Asked Questions  

Q1. How is a research proposal evaluated?  

A1. In general, most evaluators, including universities, broadly use the following criteria to evaluate research proposals . 6  

• Significance —Does the research address any important subject or issue, which may or may not be specific to the evaluator or university?  
• Content and design —Is the proposed methodology appropriate to answer the research question? Are the objectives clear and well aligned with the proposed methodology?  
• Sample size and selection —Is the target population or cohort size clearly mentioned? Is the sampling process used to select participants randomized, appropriate, and free of bias?  
• Timing —Are the proposed data collection dates mentioned clearly? Is the project feasible given the specified resources and timeline?  
• Data management and dissemination —Who will have access to the data? What is the plan for data analysis?  

Q2. What is the difference between the Introduction and Literature Review sections in a research proposal ?  

A2. The Introduction or Background section in a research proposal sets the context of the study by describing the current scenario of the subject and identifying the gaps and need for the research. A Literature Review, on the other hand, provides references to all prior relevant literature to help corroborate the gaps identified and the research need.  

Q3. How long should a research proposal be?  

A3. Research proposal lengths vary with the evaluating authority like universities or committees and also the subject. Here’s a table that lists the typical research proposal lengths for a few universities.  

Q4. What are the common mistakes to avoid in a research proposal ?  

A4. Here are a few common mistakes that you must avoid while writing a research proposal . 7  

• No clear objectives: Objectives should be clear, specific, and measurable for the easy understanding among readers.  
• Incomplete or unconvincing background research: Background research usually includes a review of the current scenario of the particular industry and also a review of the previous literature on the subject. This helps readers understand your reasons for undertaking this research because you identified gaps in the existing research.  
• Overlooking project feasibility: The project scope and estimates should be realistic considering the resources and time available.   
• Neglecting the impact and significance of the study: In a research proposal , readers and evaluators look for the implications or significance of your research and how it contributes to the existing research. This information should always be included.  
• Unstructured format of a research proposal : A well-structured document gives confidence to evaluators that you have read the guidelines carefully and are well organized in your approach, consequently affirming that you will be able to undertake the research as mentioned in your proposal.  
• Ineffective writing style: The language used should be formal and grammatically correct. If required, editors could be consulted, including AI-based tools such as Paperpal , to refine the research proposal structure and language.  

Thus, a research proposal is an essential document that can help you promote your research and secure funds and grants for conducting your research. Consequently, it should be well written in clear language and include all essential details to convince the evaluators of your ability to conduct the research as proposed.  

This article has described all the important components of a research proposal and has also provided tips to improve your writing style. We hope all these tips will help you write a well-structured research proposal to ensure receipt of grants or any other purpose.  

References  

• Sudheesh K, Duggappa DR, Nethra SS. How to write a research proposal? Indian J Anaesth. 2016;60(9):631-634. Accessed July 15, 2024. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC5037942/  
• Writing research proposals. Harvard College Office of Undergraduate Research and Fellowships. Harvard University. Accessed July 14, 2024. https://uraf.harvard.edu/apply-opportunities/app-components/essays/research-proposals  
• What is a research proposal? Plus how to write one. Indeed website. Accessed July 17, 2024. https://www.indeed.com/career-advice/career-development/research-proposal  
• Research proposal template. University of Rochester Medical Center. Accessed July 16, 2024. https://www.urmc.rochester.edu/MediaLibraries/URMCMedia/pediatrics/research/documents/Research-proposal-Template.pdf  
• Tips for successful proposal writing. Johns Hopkins University. Accessed July 17, 2024. https://research.jhu.edu/wp-content/uploads/2018/09/Tips-for-Successful-Proposal-Writing.pdf  
• Formal review of research proposals. Cornell University. Accessed July 18, 2024. https://irp.dpb.cornell.edu/surveys/survey-assessment-review-group/research-proposals  
• 7 Mistakes you must avoid in your research proposal. Aveksana (via LinkedIn). Accessed July 17, 2024. https://www.linkedin.com/pulse/7-mistakes-you-must-avoid-your-research-proposal-aveksana-cmtwf/  

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

How to write a phd research proposal.

• What are the Benefits of Generative AI for Academic Writing?
• How to Avoid Plagiarism When Using Generative AI Tools
• What is Hedging in Academic Writing?  

How to Write Your Research Paper in APA Format

The future of academia: how ai tools are changing the way we do research, you may also like, dissertation printing and binding | types & comparison , what is a dissertation preface definition and examples , how to write your research paper in apa..., how to choose a dissertation topic, how to write an academic paragraph (step-by-step guide), maintaining academic integrity with paperpal’s generative ai writing..., research funding basics: what should a grant proposal..., how to write an abstract in research papers..., how to write dissertation acknowledgements.

Skip to Content

Research in design entails the systematic study of the artifact creation process and its integration into various environments — including virtual, physical, social, psychological, economic and political. This focus area aims to enhance the practice of design engineering. It involves deepening our understanding of both the designers themselves and the users of their creations; the methodologies and techniques employed in the design process; and the broader societal impact of engineered solutions and outcomes. 

Strength Areas in Design in Mechanical Engineering

• Design Theory and Methodology: Underlying science of processes that designers use to develop engineering solutions. 
• Computational Design and Optimization: Development and use of technology to visualize, analyze, and make decisions during design processes. 
• Systems Engineering: Multi-disciplinary approaches for the design and operation of complex systems within their broader socio-technical environments. 
• Engineering for Sustainable Development: Development of design methods and processes to meet the needs of the present without compromising the ability of future generations to meet their own needs. 
• Design for Manufacturing: Methodologies and processes for designing parts, components, and products for efficient, cost-effective, and sustainable manufacturing and product realization.  
• Inclusive & Human-Centered Design: Methodologies and processes that place stakeholders at the heart of the design process to create solutions that understand and enable people of all backgrounds. 
• Bio-Inspired Design: The process of learning from nature to inspire strategies for innovation, including principles of form, function, performance, and aesthetics. 
• Design Education Research: Development and analysis of epistemology, policy, and assessment of engineering education and design skill development, including K-12, higher education, and post-education. 

Associated Faculty

• Share via Facebook
• Share via Twitter
• Share via LinkedIn
• Air Quality Research
• Biomedical Research
• Materials Research
• Mechanics of Materials Research
• Micro/Nanoscale Research
• Robotics and Systems Design Research
• Thermo Fluid Sciences Research
• Design Engineering
• Research Facilities & Centers

Apply   Visit   Give

Departments

• Ann and H.J. Smead Aerospace Engineering Sciences
• Chemical & Biological Engineering
• Civil, Environmental & Architectural Engineering
• Computer Science
• Electrical, Computer & Energy Engineering
• Paul M. Rady Mechanical Engineering
• Applied Mathematics
• Biomedical Engineering
• Creative Technology & Design
• Engineering Education
• Engineering Management
• Engineering Physics
• Integrated Design Engineering
• Environmental Engineering
• Materials Science & Engineering

Affiliates & Partners

• ATLAS Institute
• BOLD Center
• Colorado Mesa University
• Colorado Space Grant Consortium
• Discovery Learning
• Engineering Honors
• Engineering Leadership
• Entrepreneurship
• Herbst Program for Engineering, Ethics & Society
• Integrated Teaching and Learning
• Global Engineering
• National Center for Women & Information Technology
• Mortenson Center for Global Engineering
• Western Colorado University

Organizing Academic Research Papers: Types of Research Designs

• Purpose of Guide
• Design Flaws to Avoid
• Glossary of Research Terms
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Choosing a Title
• Making an Outline
• Paragraph Development
• Executive Summary
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tertiary Sources
• What Is Scholarly vs. Popular?
• Qualitative Methods
• Quantitative Methods
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Annotated Bibliography
• Dealing with Nervousness
• Using Visual Aids
• Grading Someone Else's Paper
• How to Manage Group Projects
• Multiple Book Review Essay
• Reviewing Collected Essays
• About Informed Consent
• Writing Field Notes
• Writing a Policy Memo
• Writing a Research Proposal
• Acknowledgements

Introduction

Before beginning your paper, you need to decide how you plan to design the study .

The research design refers to the overall strategy that you choose to integrate the different components of the study in a coherent and logical way, thereby, ensuring you will effectively address the research problem; it constitutes the blueprint for the collection, measurement, and analysis of data. Note that your research problem determines the type of design you can use, not the other way around!

General Structure and Writing Style

Action research design, case study design, causal design, cohort design, cross-sectional design, descriptive design, experimental design, exploratory design, historical design, longitudinal design, observational design, philosophical design, sequential design.

Kirshenblatt-Gimblett, Barbara. Part 1, What Is Research Design? The Context of Design. Performance Studies Methods Course syllabus . New York University, Spring 2006; Trochim, William M.K. Research Methods Knowledge Base . 2006.

The function of a research design is to ensure that the evidence obtained enables you to effectively address the research problem as unambiguously as possible. In social sciences research, obtaining evidence relevant to the research problem generally entails specifying the type of evidence needed to test a theory, to evaluate a program, or to accurately describe a phenomenon. However, researchers can often begin their investigations far too early, before they have thought critically about about what information is required to answer the study's research questions. Without attending to these design issues beforehand, the conclusions drawn risk being weak and unconvincing and, consequently, will fail to adequate address the overall research problem.

 Given this, the length and complexity of research designs can vary considerably, but any sound design will do the following things:

• Identify the research problem clearly and justify its selection,
• Review previously published literature associated with the problem area,
• Clearly and explicitly specify hypotheses [i.e., research questions] central to the problem selected,
• Effectively describe the data which will be necessary for an adequate test of the hypotheses and explain how such data will be obtained, and
• Describe the methods of analysis which will be applied to the data in determining whether or not the hypotheses are true or false.

Kirshenblatt-Gimblett, Barbara. Part 1, What Is Research Design? The Context of Design. Performance Studies Methods Course syllabus . New Yortk University, Spring 2006.

Definition and Purpose

The essentials of action research design follow a characteristic cycle whereby initially an exploratory stance is adopted, where an understanding of a problem is developed and plans are made for some form of interventionary strategy. Then the intervention is carried out (the action in Action Research) during which time, pertinent observations are collected in various forms. The new interventional strategies are carried out, and the cyclic process repeats, continuing until a sufficient understanding of (or implement able solution for) the problem is achieved. The protocol is iterative or cyclical in nature and is intended to foster deeper understanding of a given situation, starting with conceptualizing and particularizing the problem and moving through several interventions and evaluations.

What do these studies tell you?

• A collaborative and adaptive research design that lends itself to use in work or community situations.
• Design focuses on pragmatic and solution-driven research rather than testing theories.
• When practitioners use action research it has the potential to increase the amount they learn consciously from their experience. The action research cycle can also be regarded as a learning cycle.
• Action search studies often have direct and obvious relevance to practice.
• There are no hidden controls or preemption of direction by the researcher.

What these studies don't tell you?

• It is harder to do than conducting conventional studies because the researcher takes on responsibilities for encouraging change as well as for research.
• Action research is much harder to write up because you probably can’t use a standard format to report your findings effectively.
• Personal over-involvement of the researcher may bias research results.
• The cyclic nature of action research to achieve its twin outcomes of action (e.g. change) and research (e.g. understanding) is time-consuming and complex to conduct.

Gall, Meredith. Educational Research: An Introduction . Chapter 18, Action Research. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007; Kemmis, Stephen and Robin McTaggart. “Participatory Action Research.” In Handbook of Qualitative Research . Norman Denzin and Yvonna S. Locoln, eds. 2nd ed. (Thousand Oaks, CA: SAGE, 2000), pp. 567-605.; Reason, Peter and Hilary Bradbury. Handbook of Action Research: Participative Inquiry and Practice . Thousand Oaks, CA: SAGE, 2001.

A case study is an in-depth study of a particular research problem rather than a sweeping statistical survey. It is often used to narrow down a very broad field of research into one or a few easily researchable examples. The case study research design is also useful for testing whether a specific theory and model actually applies to phenomena in the real world. It is a useful design when not much is known about a phenomenon.

• Approach excels at bringing us to an understanding of a complex issue through detailed contextual analysis of a limited number of events or conditions and their relationships.
• A researcher using a case study design can apply a vaiety of methodologies and rely on a variety of sources to investigate a research problem.
• Design can extend experience or add strength to what is already known through previous research.
• Social scientists, in particular, make wide use of this research design to examine contemporary real-life situations and provide the basis for the application of concepts and theories and extension of methods.
• The design can provide detailed descriptions of specific and rare cases.
• A single or small number of cases offers little basis for establishing reliability or to generalize the findings to a wider population of people, places, or things.
• The intense exposure to study of the case may bias a researcher's interpretation of the findings.
• Design does not facilitate assessment of cause and effect relationships.
• Vital information may be missing, making the case hard to interpret.
• The case may not be representative or typical of the larger problem being investigated.
• If the criteria for selecting a case is because it represents a very unusual or unique phenomenon or problem for study, then your intepretation of the findings can only apply to that particular case.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 4, Flexible Methods: Case Study Design. 2nd ed. New York: Columbia University Press, 1999; Stake, Robert E. The Art of Case Study Research . Thousand Oaks, CA: SAGE, 1995; Yin, Robert K. Case Study Research: Design and Theory . Applied Social Research Methods Series, no. 5. 3rd ed. Thousand Oaks, CA: SAGE, 2003.

Causality studies may be thought of as understanding a phenomenon in terms of conditional statements in the form, “If X, then Y.” This type of research is used to measure what impact a specific change will have on existing norms and assumptions. Most social scientists seek causal explanations that reflect tests of hypotheses. Causal effect (nomothetic perspective) occurs when variation in one phenomenon, an independent variable, leads to or results, on average, in variation in another phenomenon, the dependent variable.

Conditions necessary for determining causality:

• Empirical association--a valid conclusion is based on finding an association between the independent variable and the dependent variable.
• Appropriate time order--to conclude that causation was involved, one must see that cases were exposed to variation in the independent variable before variation in the dependent variable.
• Nonspuriousness--a relationship between two variables that is not due to variation in a third variable.
• Causality research designs helps researchers understand why the world works the way it does through the process of proving a causal link between variables and eliminating other possibilities.
• Replication is possible.
• There is greater confidence the study has internal validity due to the systematic subject selection and equity of groups being compared.
• Not all relationships are casual! The possibility always exists that, by sheer coincidence, two unrelated events appear to be related [e.g., Punxatawney Phil could accurately predict the duration of Winter for five consecutive years but, the fact remains, he's just a big, furry rodent].
• Conclusions about causal relationships are difficult to determine due to a variety of extraneous and confounding variables that exist in a social environment. This means causality can only be inferred, never proven.
• If two variables are correlated, the cause must come before the effect. However, even though two variables might be causally related, it can sometimes be difficult to determine which variable comes first and therefore to establish which variable is the actual cause and which is the  actual effect.

Bachman, Ronet. The Practice of Research in Criminology and Criminal Justice . Chapter 5, Causation and Research Designs. 3rd ed.  Thousand Oaks, CA: Pine Forge Press, 2007; Causal Research Design: Experimentation. Anonymous SlideShare Presentation ; Gall, Meredith. Educational Research: An Introduction . Chapter 11, Nonexperimental Research: Correlational Designs. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007; Trochim, William M.K. Research Methods Knowledge Base . 2006.

Often used in the medical sciences, but also found in the applied social sciences, a cohort study generally refers to a study conducted over a period of time involving members of a population which the subject or representative member comes from, and who are united by some commonality or similarity. Using a quantitative framework, a cohort study makes note of statistical occurrence within a specialized subgroup, united by same or similar characteristics that are relevant to the research problem being investigated, r ather than studying statistical occurrence within the general population. Using a qualitative framework, cohort studies generally gather data using methods of observation. Cohorts can be either "open" or "closed."

• Open Cohort Studies [dynamic populations, such as the population of Los Angeles] involve a population that is defined just by the state of being a part of the study in question (and being monitored for the outcome). Date of entry and exit from the study is individually defined, therefore, the size of the study population is not constant. In open cohort studies, researchers can only calculate rate based data, such as, incidence rates and variants thereof.
• Closed Cohort Studies [static populations, such as patients entered into a clinical trial] involve participants who enter into the study at one defining point in time and where it is presumed that no new participants can enter the cohort. Given this, the number of study participants remains constant (or can only decrease).
• The use of cohorts is often mandatory because a randomized control study may be unethical. For example, you cannot deliberately expose people to asbestos, you can only study its effects on those who have already been exposed. Research that measures risk factors  often relies on cohort designs.
• Because cohort studies measure potential causes before the outcome has occurred, they can demonstrate that these “causes” preceded the outcome, thereby avoiding the debate as to which is the cause and which is the effect.
• Cohort analysis is highly flexible and can provide insight into effects over time and related to a variety of different types of changes [e.g., social, cultural, political, economic, etc.].
• Either original data or secondary data can be used in this design.
• In cases where a comparative analysis of two cohorts is made [e.g., studying the effects of one group exposed to asbestos and one that has not], a researcher cannot control for all other factors that might differ between the two groups. These factors are known as confounding variables.
• Cohort studies can end up taking a long time to complete if the researcher must wait for the conditions of interest to develop within the group. This also increases the chance that key variables change during the course of the study, potentially impacting the validity of the findings.
• Because of the lack of randominization in the cohort design, its external validity is lower than that of study designs where the researcher randomly assigns participants.

Healy P, Devane D. “Methodological Considerations in Cohort Study Designs.” Nurse Researcher 18 (2011): 32-36;  Levin, Kate Ann. Study Design IV: Cohort Studies. Evidence-Based Dentistry 7 (2003): 51–52; Study Design 101 . Himmelfarb Health Sciences Library. George Washington University, November 2011; Cohort Study . Wikipedia.

Cross-sectional research designs have three distinctive features: no time dimension, a reliance on existing differences rather than change following intervention; and, groups are selected based on existing differences rather than random allocation. The cross-sectional design can only measure diffrerences between or from among a variety of people, subjects, or phenomena rather than change. As such, researchers using this design can only employ a relative passive approach to making causal inferences based on findings.

• Cross-sectional studies provide a 'snapshot' of the outcome and the characteristics associated with it, at a specific point in time.
• Unlike the experimental design where there is an active intervention by the researcher to produce and measure change or to create differences, cross-sectional designs focus on studying and drawing inferences from existing differences between people, subjects, or phenomena.
• Entails collecting data at and concerning one point in time. While longitudinal studies involve taking multiple measures over an extended period of time, cross-sectional research is focused on finding relationships between variables at one moment in time.
• Groups identified for study are purposely selected based upon existing differences in the sample rather than seeking random sampling.
• Cross-section studies are capable of using data from a large number of subjects and, unlike observational studies, is not geographically bound.
• Can estimate prevalence of an outcome of interest because the sample is usually taken from the whole population.
• Because cross-sectional designs generally use survey techniques to gather data, they are relatively inexpensive and take up little time to conduct.
• Finding people, subjects, or phenomena to study that are very similar except in one specific variable can be difficult.
• Results are static and time bound and, therefore, give no indication of a sequence of events or reveal historical contexts.
• Studies cannot be utilized to establish cause and effect relationships.
• Provide only a snapshot of analysis so there is always the possibility that a study could have differing results if another time-frame had been chosen.
• There is no follow up to the findings.

Hall, John. “Cross-Sectional Survey Design.” In Encyclopedia of Survey Research Methods. Paul J. Lavrakas, ed. (Thousand Oaks, CA: Sage, 2008), pp. 173-174; Helen Barratt, Maria Kirwan. Cross-Sectional Studies: Design, Application, Strengths and Weaknesses of Cross-Sectional Studies . Healthknowledge, 2009. Cross-Sectional Study . Wikipedia.

Descriptive research designs help provide answers to the questions of who, what, when, where, and how associated with a particular research problem; a descriptive study cannot conclusively ascertain answers to why. Descriptive research is used to obtain information concerning the current status of the phenomena and to describe "what exists" with respect to variables or conditions in a situation.

• The subject is being observed in a completely natural and unchanged natural environment. True experiments, whilst giving analyzable data, often adversely influence the normal behavior of the subject.
• Descriptive research is often used as a pre-cursor to more quantitatively research designs, the general overview giving some valuable pointers as to what variables are worth testing quantitatively.
• If the limitations are understood, they can be a useful tool in developing a more focused study.
• Descriptive studies can yield rich data that lead to important recommendations.
• Appoach collects a large amount of data for detailed analysis.
• The results from a descriptive research can not be used to discover a definitive answer or to disprove a hypothesis.
• Because descriptive designs often utilize observational methods [as opposed to quantitative methods], the results cannot be replicated.
• The descriptive function of research is heavily dependent on instrumentation for measurement and observation.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 5, Flexible Methods: Descriptive Research. 2nd ed. New York: Columbia University Press, 1999;  McNabb, Connie. Descriptive Research Methodologies . Powerpoint Presentation; Shuttleworth, Martyn. Descriptive Research Design , September 26, 2008. Explorable.com website.

A blueprint of the procedure that enables the researcher to maintain control over all factors that may affect the result of an experiment. In doing this, the researcher attempts to determine or predict what may occur. Experimental Research is often used where there is time priority in a causal relationship (cause precedes effect), there is consistency in a causal relationship (a cause will always lead to the same effect), and the magnitude of the correlation is great. The classic experimental design specifies an experimental group and a control group. The independent variable is administered to the experimental group and not to the control group, and both groups are measured on the same dependent variable. Subsequent experimental designs have used more groups and more measurements over longer periods. True experiments must have control, randomization, and manipulation.

• Experimental research allows the researcher to control the situation. In so doing, it allows researchers to answer the question, “what causes something to occur?”
• Permits the researcher to identify cause and effect relationships between variables and to distinguish placebo effects from treatment effects.
• Experimental research designs support the ability to limit alternative explanations and to infer direct causal relationships in the study.
• Approach provides the highest level of evidence for single studies.
• The design is artificial, and results may not generalize well to the real world.
• The artificial settings of experiments may alter subject behaviors or responses.
• Experimental designs can be costly if special equipment or facilities are needed.
• Some research problems cannot be studied using an experiment because of ethical or technical reasons.
• Difficult to apply ethnographic and other qualitative methods to  experimental designed research studies.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 7, Flexible Methods: Experimental Research. 2nd ed. New York: Columbia University Press, 1999; Chapter 2: Research Design, Experimental Designs . School of Psychology, University of New England, 2000; Experimental Research. Research Methods by Dummies. Department of Psychology. California State University, Fresno, 2006; Trochim, William M.K. Experimental Design . Research Methods Knowledge Base. 2006; Rasool, Shafqat. Experimental Research . Slideshare presentation.

An exploratory design is conducted about a research problem when there are few or no earlier studies to refer to. The focus is on gaining insights and familiarity for later investigation or undertaken when problems are in a preliminary stage of investigation.

The goals of exploratory research are intended to produce the following possible insights:

• Familiarity with basic details, settings and concerns.
• Well grounded picture of the situation being developed.
• Generation of new ideas and assumption, development of tentative theories or hypotheses.
• Determination about whether a study is feasible in the future.
• Issues get refined for more systematic investigation and formulation of new research questions.
• Direction for future research and techniques get developed.
• Design is a useful approach for gaining background information on a particular topic.
• Exploratory research is flexible and can address research questions of all types (what, why, how).
• Provides an opportunity to define new terms and clarify existing concepts.
• Exploratory research is often used to generate formal hypotheses and develop more precise research problems.
• Exploratory studies help establish research priorities.
• Exploratory research generally utilizes small sample sizes and, thus, findings are typically not generalizable to the population at large.
• The exploratory nature of the research inhibits an ability to make definitive conclusions about the findings.
• The research process underpinning exploratory studies is flexible but often unstructured, leading to only tentative results that have limited value in decision-making.
• Design lacks rigorous standards applied to methods of data gathering and analysis because one of the areas for exploration could be to determine what method or methodologies could best fit the research problem.

Cuthill, Michael. “Exploratory Research: Citizen Participation, Local Government, and Sustainable Development in Australia.” Sustainable Development 10 (2002): 79-89; Taylor, P. J., G. Catalano, and D.R.F. Walker. “Exploratory Analysis of the World City Network.” Urban Studies 39 (December 2002): 2377-2394; Exploratory Research . Wikipedia.

The purpose of a historical research design is to collect, verify, and synthesize evidence from the past to establish facts that defend or refute your hypothesis. It uses secondary sources and a variety of primary documentary evidence, such as, logs, diaries, official records, reports, archives, and non-textual information [maps, pictures, audio and visual recordings]. The limitation is that the sources must be both authentic and valid.

• The historical research design is unobtrusive; the act of research does not affect the results of the study.
• The historical approach is well suited for trend analysis.
• Historical records can add important contextual background required to more fully understand and interpret a research problem.
• There is no possibility of researcher-subject interaction that could affect the findings.
• Historical sources can be used over and over to study different research problems or to replicate a previous study.
• The ability to fulfill the aims of your research are directly related to the amount and quality of documentation available to understand the research problem.
• Since historical research relies on data from the past, there is no way to manipulate it to control for contemporary contexts.
• Interpreting historical sources can be very time consuming.
• The sources of historical materials must be archived consistentally to ensure access.
• Original authors bring their own perspectives and biases to the interpretation of past events and these biases are more difficult to ascertain in historical resources.
• Due to the lack of control over external variables, historical research is very weak with regard to the demands of internal validity.
• It rare that the entirety of historical documentation needed to fully address a research problem is available for interpretation, therefore, gaps need to be acknowledged.

Savitt, Ronald. “Historical Research in Marketing.” Journal of Marketing 44 (Autumn, 1980): 52-58;  Gall, Meredith. Educational Research: An Introduction . Chapter 16, Historical Research. 8th ed. Boston, MA: Pearson/Allyn and Bacon, 2007.

A longitudinal study follows the same sample over time and makes repeated observations. With longitudinal surveys, for example, the same group of people is interviewed at regular intervals, enabling researchers to track changes over time and to relate them to variables that might explain why the changes occur. Longitudinal research designs describe patterns of change and help establish the direction and magnitude of causal relationships. Measurements are taken on each variable over two or more distinct time periods. This allows the researcher to measure change in variables over time. It is a type of observational study and is sometimes referred to as a panel study.

• Longitudinal data allow the analysis of duration of a particular phenomenon.
• Enables survey researchers to get close to the kinds of causal explanations usually attainable only with experiments.
• The design permits the measurement of differences or change in a variable from one period to another [i.e., the description of patterns of change over time].
• Longitudinal studies facilitate the prediction of future outcomes based upon earlier factors.
• The data collection method may change over time.
• Maintaining the integrity of the original sample can be difficult over an extended period of time.
• It can be difficult to show more than one variable at a time.
• This design often needs qualitative research to explain fluctuations in the data.
• A longitudinal research design assumes present trends will continue unchanged.
• It can take a long period of time to gather results.
• There is a need to have a large sample size and accurate sampling to reach representativness.

Anastas, Jeane W. Research Design for Social Work and the Human Services . Chapter 6, Flexible Methods: Relational and Longitudinal Research. 2nd ed. New York: Columbia University Press, 1999; Kalaian, Sema A. and Rafa M. Kasim. "Longitudinal Studies." In Encyclopedia of Survey Research Methods . Paul J. Lavrakas, ed. (Thousand Oaks, CA: Sage, 2008), pp. 440-441; Ployhart, Robert E. and Robert J. Vandenberg. "Longitudinal Research: The Theory, Design, and Analysis of Change.” Journal of Management 36 (January 2010): 94-120; Longitudinal Study . Wikipedia.

This type of research design draws a conclusion by comparing subjects against a control group, in cases where the researcher has no control over the experiment. There are two general types of observational designs. In direct observations, people know that you are watching them. Unobtrusive measures involve any method for studying behavior where individuals do not know they are being observed. An observational study allows a useful insight into a phenomenon and avoids the ethical and practical difficulties of setting up a large and cumbersome research project.

• Observational studies are usually flexible and do not necessarily need to be structured around a hypothesis about what you expect to observe (data is emergent rather than pre-existing).
• The researcher is able to collect a depth of information about a particular behavior.
• Can reveal interrelationships among multifaceted dimensions of group interactions.
• You can generalize your results to real life situations.
• Observational research is useful for discovering what variables may be important before applying other methods like experiments.
• Observation researchd esigns account for the complexity of group behaviors.
• Reliability of data is low because seeing behaviors occur over and over again may be a time consuming task and difficult to replicate.
• In observational research, findings may only reflect a unique sample population and, thus, cannot be generalized to other groups.
• There can be problems with bias as the researcher may only "see what they want to see."
• There is no possiblility to determine "cause and effect" relationships since nothing is manipulated.
• Sources or subjects may not all be equally credible.
• Any group that is studied is altered to some degree by the very presence of the researcher, therefore, skewing to some degree any data collected (the Heisenburg Uncertainty Principle).

Atkinson, Paul and Martyn Hammersley. “Ethnography and Participant Observation.” In Handbook of Qualitative Research . Norman K. Denzin and Yvonna S. Lincoln, eds. (Thousand Oaks, CA: Sage, 1994), pp. 248-261; Observational Research. Research Methods by Dummies. Department of Psychology. California State University, Fresno, 2006; Patton Michael Quinn. Qualitiative Research and Evaluation Methods . Chapter 6, Fieldwork Strategies and Observational Methods. 3rd ed. Thousand Oaks, CA: Sage, 2002; Rosenbaum, Paul R. Design of Observational Studies . New York: Springer, 2010.

Understood more as an broad approach to examining a research problem than a methodological design, philosophical analysis and argumentation is intended to challenge deeply embedded, often intractable, assumptions underpinning an area of study. This approach uses the tools of argumentation derived from philosophical traditions, concepts, models, and theories to critically explore and challenge, for example, the relevance of logic and evidence in academic debates, to analyze arguments about fundamental issues, or to discuss the root of existing discourse about a research problem. These overarching tools of analysis can be framed in three ways:

• Ontology -- the study that describes the nature of reality; for example, what is real and what is not, what is fundamental and what is derivative?
• Epistemology -- the study that explores the nature of knowledge; for example, on what does knowledge and understanding depend upon and how can we be certain of what we know?
• Axiology -- the study of values; for example, what values does an individual or group hold and why? How are values related to interest, desire, will, experience, and means-to-end? And, what is the difference between a matter of fact and a matter of value?
• Can provide a basis for applying ethical decision-making to practice.
• Functions as a means of gaining greater self-understanding and self-knowledge about the purposes of research.
• Brings clarity to general guiding practices and principles of an individual or group.
• Philosophy informs methodology.
• Refine concepts and theories that are invoked in relatively unreflective modes of thought and discourse.
• Beyond methodology, philosophy also informs critical thinking about epistemology and the structure of reality (metaphysics).
• Offers clarity and definition to the practical and theoretical uses of terms, concepts, and ideas.
• Limited application to specific research problems [answering the "So What?" question in social science research].
• Analysis can be abstract, argumentative, and limited in its practical application to real-life issues.
• While a philosophical analysis may render problematic that which was once simple or taken-for-granted, the writing can be dense and subject to unnecessary jargon, overstatement, and/or excessive quotation and documentation.
• There are limitations in the use of metaphor as a vehicle of philosophical analysis.
• There can be analytical difficulties in moving from philosophy to advocacy and between abstract thought and application to the phenomenal world.

Chapter 4, Research Methodology and Design . Unisa Institutional Repository (UnisaIR), University of South Africa;  Labaree, Robert V. and Ross Scimeca. “The Philosophical Problem of Truth in Librarianship.” The Library Quarterly 78 (January 2008): 43-70; Maykut, Pamela S. Beginning Qualitative Research: A Philosophic and Practical Guide . Washington, D.C.: Falmer Press, 1994; Stanford Encyclopedia of Philosophy . Metaphysics Research Lab, CSLI, Stanford University, 2013.

• The researcher has a limitless option when it comes to sample size and the sampling schedule.
• Due to the repetitive nature of this research design, minor changes and adjustments can be done during the initial parts of the study to correct and hone the research method. Useful design for exploratory studies.
• There is very little effort on the part of the researcher when performing this technique. It is generally not expensive, time consuming, or workforce extensive.
• Because the study is conducted serially, the results of one sample are known before the next sample is taken and analyzed.
• The sampling method is not representative of the entire population. The only possibility of approaching representativeness is when the researcher chooses to use a very large sample size significant enough to represent a significant portion of the entire population. In this case, moving on to study a second or more sample can be difficult.
• Because the sampling technique is not randomized, the design cannot be used to create conclusions and interpretations that pertain to an entire population. Generalizability from findings is limited.
• Difficult to account for and interpret variation from one sample to another over time, particularly when using qualitative methods of data collection.

Rebecca Betensky, Harvard University, Course Lecture Note slides ; Cresswell, John W. Et al. “Advanced Mixed-Methods Research Designs.” In Handbook of Mixed Methods in Social and Behavioral Research . Abbas Tashakkori and Charles Teddle, eds. (Thousand Oaks, CA: Sage, 2003), pp. 209-240; Nataliya V. Ivankova. “Using Mixed-Methods Sequential Explanatory Design: From Theory to Practice.” Field Methods 18 (February 2006): 3-20; Bovaird, James A. and Kevin A. Kupzyk. “Sequential Design.” In Encyclopedia of Research Design . Neil J. Salkind, ed. Thousand Oaks, CA: Sage, 2010; Sequential Analysis . Wikipedia.  

• << Previous: Purpose of Guide
• Next: Design Flaws to Avoid >>
• Last Updated: Jul 18, 2023 11:58 AM
• URL: https://library.sacredheart.edu/c.php?g=29803
• QuickSearch
• Library Catalog
• Databases A-Z
• Publication Finder
• Course Reserves
• Citation Linker
• Digital Commons
• Our Website

Research Support

• Ask a Librarian
• Appointments
• Interlibrary Loan (ILL)
• Research Guides
• Databases by Subject
• Citation Help

Using the Library

• Reserve a Group Study Room
• Renew Books
• Honors Study Rooms
• Off-Campus Access
• Library Policies
• Library Technology

User Information

• Grad Students
• Online Students
• COVID-19 Updates
• Staff Directory
• News & Announcements
• Library Newsletter

My Accounts

• Interlibrary Loan
• Staff Site Login

FIND US ON  

An official website of the United States government

The .gov means it’s official. Federal government websites often end in .gov or .mil. Before sharing sensitive information, make sure you’re on a federal government site.

The site is secure. The https:// ensures that you are connecting to the official website and that any information you provide is encrypted and transmitted securely.

• Publications
• Account settings

Preview improvements coming to the PMC website in October 2024. Learn More or Try it out now .

• Advanced Search
• Journal List
• J Korean Med Sci
• v.37(16); 2022 Apr 25

A Practical Guide to Writing Quantitative and Qualitative Research Questions and Hypotheses in Scholarly Articles

Edward barroga.

1 Department of General Education, Graduate School of Nursing Science, St. Luke’s International University, Tokyo, Japan.

Glafera Janet Matanguihan

2 Department of Biological Sciences, Messiah University, Mechanicsburg, PA, USA.

The development of research questions and the subsequent hypotheses are prerequisites to defining the main research purpose and specific objectives of a study. Consequently, these objectives determine the study design and research outcome. The development of research questions is a process based on knowledge of current trends, cutting-edge studies, and technological advances in the research field. Excellent research questions are focused and require a comprehensive literature search and in-depth understanding of the problem being investigated. Initially, research questions may be written as descriptive questions which could be developed into inferential questions. These questions must be specific and concise to provide a clear foundation for developing hypotheses. Hypotheses are more formal predictions about the research outcomes. These specify the possible results that may or may not be expected regarding the relationship between groups. Thus, research questions and hypotheses clarify the main purpose and specific objectives of the study, which in turn dictate the design of the study, its direction, and outcome. Studies developed from good research questions and hypotheses will have trustworthy outcomes with wide-ranging social and health implications.

INTRODUCTION

Scientific research is usually initiated by posing evidenced-based research questions which are then explicitly restated as hypotheses. 1 , 2 The hypotheses provide directions to guide the study, solutions, explanations, and expected results. 3 , 4 Both research questions and hypotheses are essentially formulated based on conventional theories and real-world processes, which allow the inception of novel studies and the ethical testing of ideas. 5 , 6

It is crucial to have knowledge of both quantitative and qualitative research 2 as both types of research involve writing research questions and hypotheses. 7 However, these crucial elements of research are sometimes overlooked; if not overlooked, then framed without the forethought and meticulous attention it needs. Planning and careful consideration are needed when developing quantitative or qualitative research, particularly when conceptualizing research questions and hypotheses. 4

There is a continuing need to support researchers in the creation of innovative research questions and hypotheses, as well as for journal articles that carefully review these elements. 1 When research questions and hypotheses are not carefully thought of, unethical studies and poor outcomes usually ensue. Carefully formulated research questions and hypotheses define well-founded objectives, which in turn determine the appropriate design, course, and outcome of the study. This article then aims to discuss in detail the various aspects of crafting research questions and hypotheses, with the goal of guiding researchers as they develop their own. Examples from the authors and peer-reviewed scientific articles in the healthcare field are provided to illustrate key points.

DEFINITIONS AND RELATIONSHIP OF RESEARCH QUESTIONS AND HYPOTHESES

A research question is what a study aims to answer after data analysis and interpretation. The answer is written in length in the discussion section of the paper. Thus, the research question gives a preview of the different parts and variables of the study meant to address the problem posed in the research question. 1 An excellent research question clarifies the research writing while facilitating understanding of the research topic, objective, scope, and limitations of the study. 5

On the other hand, a research hypothesis is an educated statement of an expected outcome. This statement is based on background research and current knowledge. 8 , 9 The research hypothesis makes a specific prediction about a new phenomenon 10 or a formal statement on the expected relationship between an independent variable and a dependent variable. 3 , 11 It provides a tentative answer to the research question to be tested or explored. 4

Hypotheses employ reasoning to predict a theory-based outcome. 10 These can also be developed from theories by focusing on components of theories that have not yet been observed. 10 The validity of hypotheses is often based on the testability of the prediction made in a reproducible experiment. 8

Conversely, hypotheses can also be rephrased as research questions. Several hypotheses based on existing theories and knowledge may be needed to answer a research question. Developing ethical research questions and hypotheses creates a research design that has logical relationships among variables. These relationships serve as a solid foundation for the conduct of the study. 4 , 11 Haphazardly constructed research questions can result in poorly formulated hypotheses and improper study designs, leading to unreliable results. Thus, the formulations of relevant research questions and verifiable hypotheses are crucial when beginning research. 12

CHARACTERISTICS OF GOOD RESEARCH QUESTIONS AND HYPOTHESES

Excellent research questions are specific and focused. These integrate collective data and observations to confirm or refute the subsequent hypotheses. Well-constructed hypotheses are based on previous reports and verify the research context. These are realistic, in-depth, sufficiently complex, and reproducible. More importantly, these hypotheses can be addressed and tested. 13

There are several characteristics of well-developed hypotheses. Good hypotheses are 1) empirically testable 7 , 10 , 11 , 13 ; 2) backed by preliminary evidence 9 ; 3) testable by ethical research 7 , 9 ; 4) based on original ideas 9 ; 5) have evidenced-based logical reasoning 10 ; and 6) can be predicted. 11 Good hypotheses can infer ethical and positive implications, indicating the presence of a relationship or effect relevant to the research theme. 7 , 11 These are initially developed from a general theory and branch into specific hypotheses by deductive reasoning. In the absence of a theory to base the hypotheses, inductive reasoning based on specific observations or findings form more general hypotheses. 10

TYPES OF RESEARCH QUESTIONS AND HYPOTHESES

Research questions and hypotheses are developed according to the type of research, which can be broadly classified into quantitative and qualitative research. We provide a summary of the types of research questions and hypotheses under quantitative and qualitative research categories in Table 1 .

Research questions in quantitative research

In quantitative research, research questions inquire about the relationships among variables being investigated and are usually framed at the start of the study. These are precise and typically linked to the subject population, dependent and independent variables, and research design. 1 Research questions may also attempt to describe the behavior of a population in relation to one or more variables, or describe the characteristics of variables to be measured ( descriptive research questions ). 1 , 5 , 14 These questions may also aim to discover differences between groups within the context of an outcome variable ( comparative research questions ), 1 , 5 , 14 or elucidate trends and interactions among variables ( relationship research questions ). 1 , 5 We provide examples of descriptive, comparative, and relationship research questions in quantitative research in Table 2 .

Hypotheses in quantitative research

In quantitative research, hypotheses predict the expected relationships among variables. 15 Relationships among variables that can be predicted include 1) between a single dependent variable and a single independent variable ( simple hypothesis ) or 2) between two or more independent and dependent variables ( complex hypothesis ). 4 , 11 Hypotheses may also specify the expected direction to be followed and imply an intellectual commitment to a particular outcome ( directional hypothesis ) 4 . On the other hand, hypotheses may not predict the exact direction and are used in the absence of a theory, or when findings contradict previous studies ( non-directional hypothesis ). 4 In addition, hypotheses can 1) define interdependency between variables ( associative hypothesis ), 4 2) propose an effect on the dependent variable from manipulation of the independent variable ( causal hypothesis ), 4 3) state a negative relationship between two variables ( null hypothesis ), 4 , 11 , 15 4) replace the working hypothesis if rejected ( alternative hypothesis ), 15 explain the relationship of phenomena to possibly generate a theory ( working hypothesis ), 11 5) involve quantifiable variables that can be tested statistically ( statistical hypothesis ), 11 6) or express a relationship whose interlinks can be verified logically ( logical hypothesis ). 11 We provide examples of simple, complex, directional, non-directional, associative, causal, null, alternative, working, statistical, and logical hypotheses in quantitative research, as well as the definition of quantitative hypothesis-testing research in Table 3 .

Research questions in qualitative research

Unlike research questions in quantitative research, research questions in qualitative research are usually continuously reviewed and reformulated. The central question and associated subquestions are stated more than the hypotheses. 15 The central question broadly explores a complex set of factors surrounding the central phenomenon, aiming to present the varied perspectives of participants. 15

There are varied goals for which qualitative research questions are developed. These questions can function in several ways, such as to 1) identify and describe existing conditions ( contextual research question s); 2) describe a phenomenon ( descriptive research questions ); 3) assess the effectiveness of existing methods, protocols, theories, or procedures ( evaluation research questions ); 4) examine a phenomenon or analyze the reasons or relationships between subjects or phenomena ( explanatory research questions ); or 5) focus on unknown aspects of a particular topic ( exploratory research questions ). 5 In addition, some qualitative research questions provide new ideas for the development of theories and actions ( generative research questions ) or advance specific ideologies of a position ( ideological research questions ). 1 Other qualitative research questions may build on a body of existing literature and become working guidelines ( ethnographic research questions ). Research questions may also be broadly stated without specific reference to the existing literature or a typology of questions ( phenomenological research questions ), may be directed towards generating a theory of some process ( grounded theory questions ), or may address a description of the case and the emerging themes ( qualitative case study questions ). 15 We provide examples of contextual, descriptive, evaluation, explanatory, exploratory, generative, ideological, ethnographic, phenomenological, grounded theory, and qualitative case study research questions in qualitative research in Table 4 , and the definition of qualitative hypothesis-generating research in Table 5 .

Qualitative studies usually pose at least one central research question and several subquestions starting with How or What . These research questions use exploratory verbs such as explore or describe . These also focus on one central phenomenon of interest, and may mention the participants and research site. 15

Hypotheses in qualitative research

Hypotheses in qualitative research are stated in the form of a clear statement concerning the problem to be investigated. Unlike in quantitative research where hypotheses are usually developed to be tested, qualitative research can lead to both hypothesis-testing and hypothesis-generating outcomes. 2 When studies require both quantitative and qualitative research questions, this suggests an integrative process between both research methods wherein a single mixed-methods research question can be developed. 1

FRAMEWORKS FOR DEVELOPING RESEARCH QUESTIONS AND HYPOTHESES

Research questions followed by hypotheses should be developed before the start of the study. 1 , 12 , 14 It is crucial to develop feasible research questions on a topic that is interesting to both the researcher and the scientific community. This can be achieved by a meticulous review of previous and current studies to establish a novel topic. Specific areas are subsequently focused on to generate ethical research questions. The relevance of the research questions is evaluated in terms of clarity of the resulting data, specificity of the methodology, objectivity of the outcome, depth of the research, and impact of the study. 1 , 5 These aspects constitute the FINER criteria (i.e., Feasible, Interesting, Novel, Ethical, and Relevant). 1 Clarity and effectiveness are achieved if research questions meet the FINER criteria. In addition to the FINER criteria, Ratan et al. described focus, complexity, novelty, feasibility, and measurability for evaluating the effectiveness of research questions. 14

The PICOT and PEO frameworks are also used when developing research questions. 1 The following elements are addressed in these frameworks, PICOT: P-population/patients/problem, I-intervention or indicator being studied, C-comparison group, O-outcome of interest, and T-timeframe of the study; PEO: P-population being studied, E-exposure to preexisting conditions, and O-outcome of interest. 1 Research questions are also considered good if these meet the “FINERMAPS” framework: Feasible, Interesting, Novel, Ethical, Relevant, Manageable, Appropriate, Potential value/publishable, and Systematic. 14

As we indicated earlier, research questions and hypotheses that are not carefully formulated result in unethical studies or poor outcomes. To illustrate this, we provide some examples of ambiguous research question and hypotheses that result in unclear and weak research objectives in quantitative research ( Table 6 ) 16 and qualitative research ( Table 7 ) 17 , and how to transform these ambiguous research question(s) and hypothesis(es) into clear and good statements.

a These statements were composed for comparison and illustrative purposes only.

b These statements are direct quotes from Higashihara and Horiuchi. 16

a This statement is a direct quote from Shimoda et al. 17

The other statements were composed for comparison and illustrative purposes only.

CONSTRUCTING RESEARCH QUESTIONS AND HYPOTHESES

To construct effective research questions and hypotheses, it is very important to 1) clarify the background and 2) identify the research problem at the outset of the research, within a specific timeframe. 9 Then, 3) review or conduct preliminary research to collect all available knowledge about the possible research questions by studying theories and previous studies. 18 Afterwards, 4) construct research questions to investigate the research problem. Identify variables to be accessed from the research questions 4 and make operational definitions of constructs from the research problem and questions. Thereafter, 5) construct specific deductive or inductive predictions in the form of hypotheses. 4 Finally, 6) state the study aims . This general flow for constructing effective research questions and hypotheses prior to conducting research is shown in Fig. 1 .

Research questions are used more frequently in qualitative research than objectives or hypotheses. 3 These questions seek to discover, understand, explore or describe experiences by asking “What” or “How.” The questions are open-ended to elicit a description rather than to relate variables or compare groups. The questions are continually reviewed, reformulated, and changed during the qualitative study. 3 Research questions are also used more frequently in survey projects than hypotheses in experiments in quantitative research to compare variables and their relationships.

Hypotheses are constructed based on the variables identified and as an if-then statement, following the template, ‘If a specific action is taken, then a certain outcome is expected.’ At this stage, some ideas regarding expectations from the research to be conducted must be drawn. 18 Then, the variables to be manipulated (independent) and influenced (dependent) are defined. 4 Thereafter, the hypothesis is stated and refined, and reproducible data tailored to the hypothesis are identified, collected, and analyzed. 4 The hypotheses must be testable and specific, 18 and should describe the variables and their relationships, the specific group being studied, and the predicted research outcome. 18 Hypotheses construction involves a testable proposition to be deduced from theory, and independent and dependent variables to be separated and measured separately. 3 Therefore, good hypotheses must be based on good research questions constructed at the start of a study or trial. 12

In summary, research questions are constructed after establishing the background of the study. Hypotheses are then developed based on the research questions. Thus, it is crucial to have excellent research questions to generate superior hypotheses. In turn, these would determine the research objectives and the design of the study, and ultimately, the outcome of the research. 12 Algorithms for building research questions and hypotheses are shown in Fig. 2 for quantitative research and in Fig. 3 for qualitative research.

EXAMPLES OF RESEARCH QUESTIONS FROM PUBLISHED ARTICLES

• EXAMPLE 1. Descriptive research question (quantitative research)
• - Presents research variables to be assessed (distinct phenotypes and subphenotypes)
• “BACKGROUND: Since COVID-19 was identified, its clinical and biological heterogeneity has been recognized. Identifying COVID-19 phenotypes might help guide basic, clinical, and translational research efforts.
• RESEARCH QUESTION: Does the clinical spectrum of patients with COVID-19 contain distinct phenotypes and subphenotypes? ” 19
• EXAMPLE 2. Relationship research question (quantitative research)
• - Shows interactions between dependent variable (static postural control) and independent variable (peripheral visual field loss)
• “Background: Integration of visual, vestibular, and proprioceptive sensations contributes to postural control. People with peripheral visual field loss have serious postural instability. However, the directional specificity of postural stability and sensory reweighting caused by gradual peripheral visual field loss remain unclear.
• Research question: What are the effects of peripheral visual field loss on static postural control ?” 20
• EXAMPLE 3. Comparative research question (quantitative research)
• - Clarifies the difference among groups with an outcome variable (patients enrolled in COMPERA with moderate PH or severe PH in COPD) and another group without the outcome variable (patients with idiopathic pulmonary arterial hypertension (IPAH))
• “BACKGROUND: Pulmonary hypertension (PH) in COPD is a poorly investigated clinical condition.
• RESEARCH QUESTION: Which factors determine the outcome of PH in COPD?
• STUDY DESIGN AND METHODS: We analyzed the characteristics and outcome of patients enrolled in the Comparative, Prospective Registry of Newly Initiated Therapies for Pulmonary Hypertension (COMPERA) with moderate or severe PH in COPD as defined during the 6th PH World Symposium who received medical therapy for PH and compared them with patients with idiopathic pulmonary arterial hypertension (IPAH) .” 21
• EXAMPLE 4. Exploratory research question (qualitative research)
• - Explores areas that have not been fully investigated (perspectives of families and children who receive care in clinic-based child obesity treatment) to have a deeper understanding of the research problem
• “Problem: Interventions for children with obesity lead to only modest improvements in BMI and long-term outcomes, and data are limited on the perspectives of families of children with obesity in clinic-based treatment. This scoping review seeks to answer the question: What is known about the perspectives of families and children who receive care in clinic-based child obesity treatment? This review aims to explore the scope of perspectives reported by families of children with obesity who have received individualized outpatient clinic-based obesity treatment.” 22
• EXAMPLE 5. Relationship research question (quantitative research)
• - Defines interactions between dependent variable (use of ankle strategies) and independent variable (changes in muscle tone)
• “Background: To maintain an upright standing posture against external disturbances, the human body mainly employs two types of postural control strategies: “ankle strategy” and “hip strategy.” While it has been reported that the magnitude of the disturbance alters the use of postural control strategies, it has not been elucidated how the level of muscle tone, one of the crucial parameters of bodily function, determines the use of each strategy. We have previously confirmed using forward dynamics simulations of human musculoskeletal models that an increased muscle tone promotes the use of ankle strategies. The objective of the present study was to experimentally evaluate a hypothesis: an increased muscle tone promotes the use of ankle strategies. Research question: Do changes in the muscle tone affect the use of ankle strategies ?” 23

EXAMPLES OF HYPOTHESES IN PUBLISHED ARTICLES

• EXAMPLE 1. Working hypothesis (quantitative research)
• - A hypothesis that is initially accepted for further research to produce a feasible theory
• “As fever may have benefit in shortening the duration of viral illness, it is plausible to hypothesize that the antipyretic efficacy of ibuprofen may be hindering the benefits of a fever response when taken during the early stages of COVID-19 illness .” 24
• “In conclusion, it is plausible to hypothesize that the antipyretic efficacy of ibuprofen may be hindering the benefits of a fever response . The difference in perceived safety of these agents in COVID-19 illness could be related to the more potent efficacy to reduce fever with ibuprofen compared to acetaminophen. Compelling data on the benefit of fever warrant further research and review to determine when to treat or withhold ibuprofen for early stage fever for COVID-19 and other related viral illnesses .” 24
• EXAMPLE 2. Exploratory hypothesis (qualitative research)
• - Explores particular areas deeper to clarify subjective experience and develop a formal hypothesis potentially testable in a future quantitative approach
• “We hypothesized that when thinking about a past experience of help-seeking, a self distancing prompt would cause increased help-seeking intentions and more favorable help-seeking outcome expectations .” 25
• “Conclusion
• Although a priori hypotheses were not supported, further research is warranted as results indicate the potential for using self-distancing approaches to increasing help-seeking among some people with depressive symptomatology.” 25
• EXAMPLE 3. Hypothesis-generating research to establish a framework for hypothesis testing (qualitative research)
• “We hypothesize that compassionate care is beneficial for patients (better outcomes), healthcare systems and payers (lower costs), and healthcare providers (lower burnout). ” 26
• Compassionomics is the branch of knowledge and scientific study of the effects of compassionate healthcare. Our main hypotheses are that compassionate healthcare is beneficial for (1) patients, by improving clinical outcomes, (2) healthcare systems and payers, by supporting financial sustainability, and (3) HCPs, by lowering burnout and promoting resilience and well-being. The purpose of this paper is to establish a scientific framework for testing the hypotheses above . If these hypotheses are confirmed through rigorous research, compassionomics will belong in the science of evidence-based medicine, with major implications for all healthcare domains.” 26
• EXAMPLE 4. Statistical hypothesis (quantitative research)
• - An assumption is made about the relationship among several population characteristics ( gender differences in sociodemographic and clinical characteristics of adults with ADHD ). Validity is tested by statistical experiment or analysis ( chi-square test, Students t-test, and logistic regression analysis)
• “Our research investigated gender differences in sociodemographic and clinical characteristics of adults with ADHD in a Japanese clinical sample. Due to unique Japanese cultural ideals and expectations of women's behavior that are in opposition to ADHD symptoms, we hypothesized that women with ADHD experience more difficulties and present more dysfunctions than men . We tested the following hypotheses: first, women with ADHD have more comorbidities than men with ADHD; second, women with ADHD experience more social hardships than men, such as having less full-time employment and being more likely to be divorced.” 27
• “Statistical Analysis
• ( text omitted ) Between-gender comparisons were made using the chi-squared test for categorical variables and Students t-test for continuous variables…( text omitted ). A logistic regression analysis was performed for employment status, marital status, and comorbidity to evaluate the independent effects of gender on these dependent variables.” 27

EXAMPLES OF HYPOTHESIS AS WRITTEN IN PUBLISHED ARTICLES IN RELATION TO OTHER PARTS

• EXAMPLE 1. Background, hypotheses, and aims are provided
• “Pregnant women need skilled care during pregnancy and childbirth, but that skilled care is often delayed in some countries …( text omitted ). The focused antenatal care (FANC) model of WHO recommends that nurses provide information or counseling to all pregnant women …( text omitted ). Job aids are visual support materials that provide the right kind of information using graphics and words in a simple and yet effective manner. When nurses are not highly trained or have many work details to attend to, these job aids can serve as a content reminder for the nurses and can be used for educating their patients (Jennings, Yebadokpo, Affo, & Agbogbe, 2010) ( text omitted ). Importantly, additional evidence is needed to confirm how job aids can further improve the quality of ANC counseling by health workers in maternal care …( text omitted )” 28
• “ This has led us to hypothesize that the quality of ANC counseling would be better if supported by job aids. Consequently, a better quality of ANC counseling is expected to produce higher levels of awareness concerning the danger signs of pregnancy and a more favorable impression of the caring behavior of nurses .” 28
• “This study aimed to examine the differences in the responses of pregnant women to a job aid-supported intervention during ANC visit in terms of 1) their understanding of the danger signs of pregnancy and 2) their impression of the caring behaviors of nurses to pregnant women in rural Tanzania.” 28
• EXAMPLE 2. Background, hypotheses, and aims are provided
• “We conducted a two-arm randomized controlled trial (RCT) to evaluate and compare changes in salivary cortisol and oxytocin levels of first-time pregnant women between experimental and control groups. The women in the experimental group touched and held an infant for 30 min (experimental intervention protocol), whereas those in the control group watched a DVD movie of an infant (control intervention protocol). The primary outcome was salivary cortisol level and the secondary outcome was salivary oxytocin level.” 29
• “ We hypothesize that at 30 min after touching and holding an infant, the salivary cortisol level will significantly decrease and the salivary oxytocin level will increase in the experimental group compared with the control group .” 29
• EXAMPLE 3. Background, aim, and hypothesis are provided
• “In countries where the maternal mortality ratio remains high, antenatal education to increase Birth Preparedness and Complication Readiness (BPCR) is considered one of the top priorities [1]. BPCR includes birth plans during the antenatal period, such as the birthplace, birth attendant, transportation, health facility for complications, expenses, and birth materials, as well as family coordination to achieve such birth plans. In Tanzania, although increasing, only about half of all pregnant women attend an antenatal clinic more than four times [4]. Moreover, the information provided during antenatal care (ANC) is insufficient. In the resource-poor settings, antenatal group education is a potential approach because of the limited time for individual counseling at antenatal clinics.” 30
• “This study aimed to evaluate an antenatal group education program among pregnant women and their families with respect to birth-preparedness and maternal and infant outcomes in rural villages of Tanzania.” 30
• “ The study hypothesis was if Tanzanian pregnant women and their families received a family-oriented antenatal group education, they would (1) have a higher level of BPCR, (2) attend antenatal clinic four or more times, (3) give birth in a health facility, (4) have less complications of women at birth, and (5) have less complications and deaths of infants than those who did not receive the education .” 30

Research questions and hypotheses are crucial components to any type of research, whether quantitative or qualitative. These questions should be developed at the very beginning of the study. Excellent research questions lead to superior hypotheses, which, like a compass, set the direction of research, and can often determine the successful conduct of the study. Many research studies have floundered because the development of research questions and subsequent hypotheses was not given the thought and meticulous attention needed. The development of research questions and hypotheses is an iterative process based on extensive knowledge of the literature and insightful grasp of the knowledge gap. Focused, concise, and specific research questions provide a strong foundation for constructing hypotheses which serve as formal predictions about the research outcomes. Research questions and hypotheses are crucial elements of research that should not be overlooked. They should be carefully thought of and constructed when planning research. This avoids unethical studies and poor outcomes by defining well-founded objectives that determine the design, course, and outcome of the study.

Disclosure: The authors have no potential conflicts of interest to disclose.

Author Contributions:

• Conceptualization: Barroga E, Matanguihan GJ.
• Methodology: Barroga E, Matanguihan GJ.
• Writing - original draft: Barroga E, Matanguihan GJ.
• Writing - review & editing: Barroga E, Matanguihan GJ.

Suggestions or feedback?

MIT News | Massachusetts Institute of Technology

• Machine learning
• Sustainability
• Black holes
• Classes and programs

Departments

• Aeronautics and Astronautics
• Brain and Cognitive Sciences
• Architecture
• Political Science
• Mechanical Engineering

Centers, Labs, & Programs

• Abdul Latif Jameel Poverty Action Lab (J-PAL)
• Picower Institute for Learning and Memory
• Lincoln Laboratory
• School of Architecture + Planning
• School of Engineering
• School of Humanities, Arts, and Social Sciences
• Sloan School of Management
• School of Science
• MIT Schwarzman College of Computing

When the lights turned on in the universe

Press contact :, media download.

*Terms of Use:

Images for download on the MIT News office website are made available to non-commercial entities, press and the general public under a Creative Commons Attribution Non-Commercial No Derivatives license . You may not alter the images provided, other than to crop them to size. A credit line must be used when reproducing images; if one is not provided below, credit the images to "MIT."

Previous image Next image

Watching crowds of people hustle along Massachusetts Avenue from her window seat in MIT’s student center, Dominika Ďurovčíková has just one wish.

“What I would really like to do is convince a city to shut down their lights completely, apart from hospitals or whatever else needs them, just for an hour,” she says. “Let people see the Milky Way, or the stars. It influences you. You realize there’s something more than your everyday struggles.”

Even with a lifetime of gazing into the cosmos under her belt — with the last few years spent pursuing a PhD with professors Anna-Christina Eilers and Robert Simcoe at MIT’s Kavli Institute for Astrophysics and Space Research — she still believes in the power of looking up at the night sky with the naked eye.

Most of the time, however, she’s using tools a lot more powerful than that. The James Webb Space Telescope has begun providing rich data from bodies at the very edge of the universe, exactly where she wants to be looking. With data from the JSWT and the ground-based Magellan telescopes in Chile, Ďurovčíková is on the hunt for distant quasars — ancient, supermassive black holes that emit intense amounts of light — and the farther away they are, the more information they provide about the very early universe.

“These objects are really, really bright, and that means that they’re really useful for studying the universe from very far away,” she says. “They’re like beacons from the past that you can still see, and they can tell you something about the universe at that stage. It’s almost like archaeology.”

Her recent research has focused on what’s known as the Epoch of Reionization. It’s the period of time when the radiation from quasars, stars, galaxies and other light-emitting bodies were able to penetrate through the dark clouds of hydrogen atoms left over from the Big Bang, and shine their light through space.

“Reionization was a phase transition where all the stuff around galaxies suddenly became transparent,” she says. “Finally, we could see light that was otherwise absorbed by neutral hydrogen.”

One of her goals is to help discover what caused the reionization process to start in the first place. While the astrophysical community has determined a loose time frame, there are many unanswered questions surrounding the Epoch of Reionization, and she hopes her quasar research can help solve some of them.

“The grand hope is that if you know the timing of reionization, that can inform you about the sources that caused it in the first place,” she says. “We’re not quite there, but looking at quasars could be a way to do it.”

Time and distance on a cosmic scale

The quasars that Ďurovčíková has been most interested in are classified as “high-redshift.” Redshift is a measure of how much a wave’s frequency has decreased, and in an astrophysical context, it can be used to determine how long a wave of light has been traveling and how far away its source is, while accounting for the expansion of the universe.

“The higher the redshift, the closer to the beginning of the universe you get,” Ďurovčíková explains.

Research has shown that reionization began roughly 150 million years after the Big Bang, and approximately 850 million years after that, the dark hydrogen clouds that made up the “intergalactic medium,” or IGM, were fully ionized.

For her most recent paper, Ďurovčíková examined a set of 18 quasars whose light began traveling between approximately 770 million and 950 million years after the Big Bang. She and her collaborators, including scientists from four different countries, sorted the quasars into three “bins” based on distance, to compare the amount of neutral hydrogen in the IGM at different epochs. These amounts helped refine the timing of reionization and confirmed that data from quasars are consistent with data from other types of bodies.

“The story we have so far,” Ďurovčíková says, “is that at some point by redshift 5 or 6, the stuff in between galaxies was overall ionized. However, it’s not clear what type of star or what type of galaxy is more responsible for this global phase transition, which affected the whole universe.”

A closely related facet of her research — and one she’s planning on exploring further as she composes her thesis — is on how these quasars came to be in the first place. They’re so old, and so massive, that they challenge the current conceptions of how old the universe is. The light they generate comes from the immense gravitational force they exert on the plasma they absorb, and if they were already large enough to do that billions of years ago, just how long ago did they start forming?

“These black holes seem to be too massive to be grown in the time that their spectra seem to indicate,” she says. “Is there something in our way that’s obscuring the rest of the growth? We’re looking at different methods to measure their lifetime.”

Eyes towards the stars, feet grounded on Earth

In the meantime, Ďurovčíková is also working to encourage the next generation of astrophysicists. She says she was fortunate to have encouraging parents and mentors who showed her academic and career paths she hadn’t even considered, and she co-founded a nonprofit organization called Encouraging Women Across All Borders to do the same for students across the globe.

“In your life, you will see a lot of doors,” she says. “There’s doors that you’ll see are open, and there’s doors you’ll see are closed. The biggest tragedy, though, is that there are so many doors that you don’t even know exist.”

She knows the feeling all too well. Growing up in Slovakia meant the primary options were attending university in either Bratislava, the capital, or Prague, in the neighboring Czech Republic. Her love of math and physics inspired her to enroll in the International Baccalaureate program, however, and it was in that program that she met a teacher, named Eva Žitná, who “planted the seeds” that eventually sent her to Oxford for a four-year master’s program.

“Just being in the IB program environment started to open up these possibilities I had not considered before,” she says. “Both my parents and I started talking to Žitná about how this could be an interesting possibility, and somehow one thing led to another.”

While she takes great pleasure in guiding students along the same path she once took, equally as rewarding for her are the moments when she can see people realizing just how big the universe is. As a co-director of the MIT Astrogazers, she has witnessed many such moments. She remembers handing out eclipse glasses at the Cambridge Science Festival in preparation for last October’s partial solar eclipse, and recalls kids and adults alike with their necks craned upward, sharing the same look of wonder on their faces.

“The reason I care is because we all get caught up in small things in life very easily,” she says. “The traffic sucks. The T isn’t working. Then, you look up at the sky and you realize there’s something much more beautiful and much bigger than all these little things.”

Share this news article on:

Related links.

• Dominika Ďurovčíková
• Cosmic Dawn Group
• Kavli Institute
• Department of Physics

Related Topics

• Graduate, postdoctoral
• Astrophysics
• Space, astronomy and planetary science

Related Articles

MIT astronomers observe elusive stellar light surrounding ancient quasars

3Q: Exploring the universe’s “first light”

Previous item Next item

More MIT News

AI assistant monitors teamwork to promote effective collaboration

Read full story →

MIT study explains why laws are written in an incomprehensible style

More durable metals for fusion power reactors

3 Questions: How to prove humanity online

Lincoln Laboratory and National Strategic Research Institute launch student research program to tackle biothreats to national security

Christine Ortiz named director of MIT Technology and Policy Program

• More news on MIT News homepage →

Massachusetts Institute of Technology 77 Massachusetts Avenue, Cambridge, MA, USA

• Map (opens in new window)
• Events (opens in new window)
• People (opens in new window)
• Careers (opens in new window)
• Accessibility
• Social Media Hub
• MIT on Facebook
• MIT on YouTube
• MIT on Instagram