assignment on operator

cppreference.com

Assignment operators.

Assignment operators modify the value of the object.

[ edit ] Definitions

Copy assignment replaces the contents of the object a with a copy of the contents of b ( b is not modified). For class types, this is performed in a special member function, described in copy assignment operator .

For non-class types, copy and move assignment are indistinguishable and are referred to as direct assignment .

Compound assignment replace the contents of the object a with the result of a binary operation between the previous value of a and the value of b .

[ edit ] Assignment operator syntax

The assignment expressions have the form

• ↑ target-expr must have higher precedence than an assignment expression.
• ↑ new-value cannot be a comma expression, because its precedence is lower.

[ edit ] Built-in simple assignment operator

For the built-in simple assignment, the object referred to by target-expr is modified by replacing its value with the result of new-value . target-expr must be a modifiable lvalue.

The result of a built-in simple assignment is an lvalue of the type of target-expr , referring to target-expr . If target-expr is a bit-field , the result is also a bit-field.

[ edit ] Assignment from an expression

If new-value is an expression, it is implicitly converted to the cv-unqualified type of target-expr . When target-expr is a bit-field that cannot represent the value of the expression, the resulting value of the bit-field is implementation-defined.

If target-expr and new-value identify overlapping objects, the behavior is undefined (unless the overlap is exact and the type is the same).

In overload resolution against user-defined operators , for every type T , the following function signatures participate in overload resolution:

For every enumeration or pointer to member type T , optionally volatile-qualified, the following function signature participates in overload resolution:

For every pair A1 and A2 , where A1 is an arithmetic type (optionally volatile-qualified) and A2 is a promoted arithmetic type, the following function signature participates in overload resolution:

[ edit ] Built-in compound assignment operator

The behavior of every built-in compound-assignment expression target-expr   op   =   new-value is exactly the same as the behavior of the expression target-expr   =   target-expr   op   new-value , except that target-expr is evaluated only once.

The requirements on target-expr and new-value of built-in simple assignment operators also apply. Furthermore:

• For + = and - = , the type of target-expr must be an arithmetic type or a pointer to a (possibly cv-qualified) completely-defined object type .
• For all other compound assignment operators, the type of target-expr must be an arithmetic type.

In overload resolution against user-defined operators , for every pair A1 and A2 , where A1 is an arithmetic type (optionally volatile-qualified) and A2 is a promoted arithmetic type, the following function signatures participate in overload resolution:

For every pair I1 and I2 , where I1 is an integral type (optionally volatile-qualified) and I2 is a promoted integral type, the following function signatures participate in overload resolution:

For every optionally cv-qualified object type T , the following function signatures participate in overload resolution:

[ edit ] Example

Possible output:

[ edit ] Defect reports

The following behavior-changing defect reports were applied retroactively to previously published C++ standards.

[ edit ] See also

Operator precedence

Operator overloading

• Recent changes
• Offline version
• What links here
• Related changes
• Upload file
• Special pages
• Printable version
• Permanent link
• Page information
• In other languages
• This page was last modified on 25 January 2024, at 22:41.
• This page has been accessed 410,142 times.
• Privacy policy
• About cppreference.com
• Disclaimers

• C Programming Tutorial
• C - Overview
• C - Features
• C - History
• C - Environment Setup
• C - Program Structure
• C - Hello World
• C - Compilation Process
• C - Comments
• C - Keywords
• C - Identifiers
• C - User Input
• C - Basic Syntax
• C - Data Types
• C - Variables
• C - Integer Promotions
• C - Type Conversion
• C - Constants
• C - Literals
• C - Escape sequences
• C - Format Specifiers
• C - Storage Classes
• C - Operators
• C - Decision Making
• C - if statement
• C - if...else statement
• C - nested if statements
• C - switch statement
• C - nested switch statements
• C - While loop
• C - For loop
• C - Do...while loop
• C - Nested loop
• C - Infinite loop
• C - Break Statement
• C - Continue Statement
• C - goto Statement
• C - Functions
• C - Main Functions
• C - Return Statement
• C - Recursion
• C - Scope Rules
• C - Properties of Array
• C - Multi-Dimensional Arrays
• C - Passing Arrays to Function
• C - Return Array from Function
• C - Variable Length Arrays
• C - Pointers
• C - Pointer Arithmetics
• C - Passing Pointers to Functions
• C - Strings
• C - Array of Strings
• C - Structures
• C - Structures and Functions
• C - Arrays of Structures
• C - Pointers to Structures
• C - Self-Referential Structures
• C - Nested Structures
• C - Bit Fields
• C - Typedef
• C - Input & Output
• C - File I/O
• C - Preprocessors
• C - Header Files
• C - Type Casting
• C - Error Handling
• C - Variable Arguments
• C - Memory Management
• C - Command Line Arguments
• C Programming Resources
• C - Questions & Answers
• C - Quick Guide
• C - Useful Resources
• C - Discussion
• Selected Reading
• UPSC IAS Exams Notes
• Developer's Best Practices
• Questions and Answers
• Effective Resume Writing
• HR Interview Questions
• Computer Glossary

Assignment Operators in C

In C, the assignment operator stores a certain value in an already declared variable. A variable in C can be assigned the value in the form of a literal, another variable or an expression. The value to be assigned forms the right hand operand, whereas the variable to be assigned should be the operand to the left of = symbol, which is defined as a simple assignment operator in C. In addition, C has several augmented assignment operators.

The following table lists the assignment operators supported by the C language −

Simple assignment operator (=)

The = operator is the most frequently used operator in C. As per ANSI C standard, all the variables must be declared in the beginning. Variable declaration after the first processing statement is not allowed. You can declare a variable to be assigned a value later in the code, or you can initialize it at the time of declaration.

You can use a literal, another variable or an expression in the assignment statement.

Once a variable of a certain type is declared, it cannot be assigned a value of any other type. In such a case the C compiler reports a type mismatch error.

In C, the expressions that refer to a memory location are called "lvalue" expressions. A lvalue may appear as either the left-hand or right-hand side of an assignment.

On the other hand, the term rvalue refers to a data value that is stored at some address in memory. A rvalue is an expression that cannot have a value assigned to it which means an rvalue may appear on the right-hand side but not on the left-hand side of an assignment.

Variables are lvalues and so they may appear on the left-hand side of an assignment. Numeric literals are rvalues and so they may not be assigned and cannot appear on the left-hand side. Take a look at the following valid and invalid statements −

Augmented assignment operators

In addition to the = operator, C allows you to combine arithmetic and bitwise operators with the = symbol to form augmented or compound assignment operator. The augmented operators offer a convenient shortcut for combining arithmetic or bitwise operation with assignment.

For example, the expression a+=b has the same effect of performing a+b first and then assigning the result back to the variable a.

Similarly, the expression a<<=b has the same effect of performing a<<b first and then assigning the result back to the variable a.

Here is a C program that demonstrates the use of assignment operators in C:

When you compile and execute the above program, it produces the following result −

• school Campus Bookshelves
• menu_book Bookshelves
• perm_media Learning Objects
• login Login
• how_to_reg Request Instructor Account
• hub Instructor Commons
• Download Page (PDF)
• Download Full Book (PDF)
• Periodic Table
• Physics Constants
• Scientific Calculator
• Reference & Cite
• Tools expand_more
• Readability

selected template will load here

This action is not available.

4.6: Assignment Operator

• Last updated
• Save as PDF
• Page ID 29038

• Patrick McClanahan
• San Joaquin Delta College

Assignment Operator

The assignment operator allows us to change the value of a modifiable data object (for beginning programmers this typically means a variable). It is associated with the concept of moving a value into the storage location (again usually a variable). Within C++ programming language the symbol used is the equal symbol. But bite your tongue, when you see the = symbol you need to start thinking: assignment. The assignment operator has two operands. The one to the left of the operator is usually an identifier name for a variable. The one to the right of the operator is a value.

The value 21 is moved to the memory location for the variable named: age. Another way to say it: age is assigned the value 21.

The item to the right of the assignment operator is an expression. The expression will be evaluated and the answer is 14. The value 14 would assigned to the variable named: total_cousins.

The expression to the right of the assignment operator contains some identifier names. The program would fetch the values stored in those variables; add them together and get a value of 44; then assign the 44 to the total_students variable.

As we have seen, assignment operators are used to assigning value to a variable. The left side operand of the assignment operator is a variable and right side operand of the assignment operator is a value. The value on the right side must be of the same data-type of the variable on the left side otherwise the compiler will raise an error. Different types of assignment operators are shown below:

• “=” : This is the simplest assignment operator, which was discussed above. This operator is used to assign the value on the right to the variable on the left. For example: a = 10; b = 20; ch = 'y';

If initially the value 5 is stored in the variable a,  then:  (a += 6) is equal to 11.  (the same as: a = a + 6)

If initially value 8 is stored in the variable a, then (a -= 6) is equal to  2. (the same as a = a - 6)

If initially value 5 is stored in the variable a,, then (a *= 6) is equal to 30. (the same as a = a * 6)

If initially value 6 is stored in the variable a, then (a /= 2) is equal to 3. (the same as a = a / 2)

Below example illustrates the various Assignment Operators:

Definitions

 Adapted from:  "Assignment Operator"  by  Kenneth Leroy Busbee , (Download for free at http://cnx.org/contents/[email protected] ) is licensed under  CC BY 4.0

• Skip to main content
• Select language
• Skip to search
• Assignment operators

An assignment operator assigns a value to its left operand based on the value of its right operand.

The basic assignment operator is equal ( = ), which assigns the value of its right operand to its left operand. That is, x = y assigns the value of y to x . The other assignment operators are usually shorthand for standard operations, as shown in the following definitions and examples.

Simple assignment operator which assigns a value to a variable. The assignment operation evaluates to the assigned value. Chaining the assignment operator is possible in order to assign a single value to multiple variables. See the example.

Addition assignment

The addition assignment operator adds the value of the right operand to a variable and assigns the result to the variable. The types of the two operands determine the behavior of the addition assignment operator. Addition or concatenation is possible. See the addition operator for more details.

Subtraction assignment

The subtraction assignment operator subtracts the value of the right operand from a variable and assigns the result to the variable. See the subtraction operator for more details.

Multiplication assignment

The multiplication assignment operator multiplies a variable by the value of the right operand and assigns the result to the variable. See the multiplication operator for more details.

Division assignment

The division assignment operator divides a variable by the value of the right operand and assigns the result to the variable. See the division operator for more details.

Remainder assignment

The remainder assignment operator divides a variable by the value of the right operand and assigns the remainder to the variable. See the remainder operator for more details.

Exponentiation assignment

This is an experimental technology, part of the ECMAScript 2016 (ES7) proposal. Because this technology's specification has not stabilized, check the compatibility table for usage in various browsers. Also note that the syntax and behavior of an experimental technology is subject to change in future version of browsers as the spec changes.

The exponentiation assignment operator evaluates to the result of raising first operand to the power second operand. See the exponentiation operator for more details.

Left shift assignment

The left shift assignment operator moves the specified amount of bits to the left and assigns the result to the variable. See the left shift operator for more details.

Right shift assignment

The right shift assignment operator moves the specified amount of bits to the right and assigns the result to the variable. See the right shift operator for more details.

Unsigned right shift assignment

The unsigned right shift assignment operator moves the specified amount of bits to the right and assigns the result to the variable. See the unsigned right shift operator for more details.

Bitwise AND assignment

The bitwise AND assignment operator uses the binary representation of both operands, does a bitwise AND operation on them and assigns the result to the variable. See the bitwise AND operator for more details.

Bitwise XOR assignment

The bitwise XOR assignment operator uses the binary representation of both operands, does a bitwise XOR operation on them and assigns the result to the variable. See the bitwise XOR operator for more details.

Bitwise OR assignment

The bitwise OR assignment operator uses the binary representation of both operands, does a bitwise OR operation on them and assigns the result to the variable. See the bitwise OR operator for more details.

Left operand with another assignment operator

In unusual situations, the assignment operator (e.g. x += y ) is not identical to the meaning expression (here x = x + y ). When the left operand of an assignment operator itself contains an assignment operator, the left operand is evaluated only once. For example:

Specifications

Browser compatibility.

• Arithmetic operators

Document Tags and Contributors

• JavaScript basics
• JavaScript first steps
• JavaScript building blocks
• Introducing JavaScript objects
• Introduction
• Grammar and types
• Control flow and error handling
• Loops and iteration
• Expressions and operators
• Numbers and dates
• Text formatting
• Regular expressions
• Indexed collections
• Keyed collections
• Working with objects
• Details of the object model
• Iterators and generators
• Meta programming
• A re-introduction to JavaScript
• JavaScript data structures
• Equality comparisons and sameness
• Inheritance and the prototype chain
• Strict mode
• JavaScript typed arrays
• Memory Management
• Concurrency model and Event Loop
• References:
• ArrayBuffer
• AsyncFunction
• Float32Array
• Float64Array
• GeneratorFunction
• InternalError
• Intl.Collator
• Intl.DateTimeFormat
• Intl.NumberFormat
• ParallelArray
• ReferenceError
• SIMD.Bool16x8
• SIMD.Bool32x4
• SIMD.Bool64x2
• SIMD.Bool8x16
• SIMD.Float32x4
• SIMD.Float64x2
• SIMD.Int16x8
• SIMD.Int32x4
• SIMD.Int8x16
• SIMD.Uint16x8
• SIMD.Uint32x4
• SIMD.Uint8x16
• SharedArrayBuffer
• StopIteration
• SyntaxError
• Uint16Array
• Uint32Array
• Uint8ClampedArray
• WebAssembly
• decodeURI()
• decodeURIComponent()
• encodeURI()
• encodeURIComponent()
• parseFloat()
• Array comprehensions
• Bitwise operators
• Comma operator
• Comparison operators
• Conditional (ternary) Operator
• Destructuring assignment
• Expression closures
• Generator comprehensions
• Grouping operator
• Legacy generator function expression
• Logical Operators
• Object initializer
• Operator precedence
• Property accessors
• Spread syntax
• async function expression
• class expression
• delete operator
• function expression
• function* expression
• in operator
• new operator
• void operator
• Legacy generator function
• async function
• for each...in
• function declaration
• try...catch
• Arguments object
• Arrow functions
• Default parameters
• Method definitions
• Rest parameters
• constructor
• element loaded from a different domain for which you violated the same-origin policy.">Error: Permission denied to access property "x"
• InternalError: too much recursion
• RangeError: argument is not a valid code point
• RangeError: invalid array length
• RangeError: invalid date
• RangeError: precision is out of range
• RangeError: radix must be an integer
• RangeError: repeat count must be less than infinity
• RangeError: repeat count must be non-negative
• ReferenceError: "x" is not defined
• ReferenceError: assignment to undeclared variable "x"
• ReferenceError: deprecated caller or arguments usage
• ReferenceError: invalid assignment left-hand side
• ReferenceError: reference to undefined property "x"
• SyntaxError: "0"-prefixed octal literals and octal escape seq. are deprecated
• SyntaxError: "use strict" not allowed in function with non-simple parameters
• SyntaxError: "x" is a reserved identifier
• SyntaxError: JSON.parse: bad parsing
• SyntaxError: Malformed formal parameter
• SyntaxError: Unexpected token
• SyntaxError: Using //@ to indicate sourceURL pragmas is deprecated. Use //# instead
• SyntaxError: a declaration in the head of a for-of loop can't have an initializer
• SyntaxError: applying the 'delete' operator to an unqualified name is deprecated
• SyntaxError: for-in loop head declarations may not have initializers
• SyntaxError: function statement requires a name
• SyntaxError: identifier starts immediately after numeric literal
• SyntaxError: illegal character
• SyntaxError: invalid regular expression flag "x"
• SyntaxError: missing ) after argument list
• SyntaxError: missing ) after condition
• SyntaxError: missing : after property id
• SyntaxError: missing ; before statement
• SyntaxError: missing = in const declaration
• SyntaxError: missing ] after element list
• SyntaxError: missing formal parameter
• SyntaxError: missing name after . operator
• SyntaxError: missing variable name
• SyntaxError: missing } after function body
• SyntaxError: missing } after property list
• SyntaxError: redeclaration of formal parameter "x"
• SyntaxError: return not in function
• SyntaxError: test for equality (==) mistyped as assignment (=)?
• SyntaxError: unterminated string literal
• TypeError: "x" has no properties
• TypeError: "x" is (not) "y"
• TypeError: "x" is not a constructor
• TypeError: "x" is not a function
• TypeError: "x" is not a non-null object
• TypeError: "x" is read-only
• TypeError: More arguments needed
• TypeError: can't access dead object
• TypeError: can't define property "x": "obj" is not extensible
• TypeError: can't redefine non-configurable property "x"
• TypeError: cyclic object value
• TypeError: invalid 'in' operand "x"
• TypeError: invalid Array.prototype.sort argument
• TypeError: invalid arguments
• TypeError: invalid assignment to const "x"
• TypeError: property "x" is non-configurable and can't be deleted
• TypeError: setting getter-only property "x"
• TypeError: variable "x" redeclares argument
• URIError: malformed URI sequence
• Warning: -file- is being assigned a //# sourceMappingURL, but already has one
• Warning: 08/09 is not a legal ECMA-262 octal constant
• Warning: Date.prototype.toLocaleFormat is deprecated
• Warning: JavaScript 1.6's for-each-in loops are deprecated
• Warning: String.x is deprecated; use String.prototype.x instead
• Warning: expression closures are deprecated
• Warning: unreachable code after return statement
• JavaScript technologies overview
• Lexical grammar
• Enumerability and ownership of properties
• Iteration protocols
• Transitioning to strict mode
• Template literals
• Deprecated features
• ECMAScript 2015 support in Mozilla
• ECMAScript 5 support in Mozilla
• ECMAScript Next support in Mozilla
• Firefox JavaScript changelog
• New in JavaScript 1.1
• New in JavaScript 1.2
• New in JavaScript 1.3
• New in JavaScript 1.4
• New in JavaScript 1.5
• New in JavaScript 1.6
• New in JavaScript 1.7
• New in JavaScript 1.8
• New in JavaScript 1.8.1
• New in JavaScript 1.8.5
• Documentation:
• All pages index
• Methods index
• Properties index
• Pages tagged "JavaScript"
• JavaScript doc status
• The MDN project

This browser is no longer supported.

Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.

Assignment operators (C# reference)

• 11 contributors

The assignment operator = assigns the value of its right-hand operand to a variable, a property , or an indexer element given by its left-hand operand. The result of an assignment expression is the value assigned to the left-hand operand. The type of the right-hand operand must be the same as the type of the left-hand operand or implicitly convertible to it.

The assignment operator = is right-associative, that is, an expression of the form

is evaluated as

The following example demonstrates the usage of the assignment operator with a local variable, a property, and an indexer element as its left-hand operand:

The left-hand operand of an assignment receives the value of the right-hand operand. When the operands are of value types , assignment copies the contents of the right-hand operand. When the operands are of reference types , assignment copies the reference to the object.

This is called value assignment : the value is assigned.

ref assignment

Ref assignment = ref makes its left-hand operand an alias to the right-hand operand, as the following example demonstrates:

In the preceding example, the local reference variable arrayElement is initialized as an alias to the first array element. Then, it's ref reassigned to refer to the last array element. As it's an alias, when you update its value with an ordinary assignment operator = , the corresponding array element is also updated.

The left-hand operand of ref assignment can be a local reference variable , a ref field , and a ref , out , or in method parameter. Both operands must be of the same type.

Compound assignment

For a binary operator op , a compound assignment expression of the form

is equivalent to

except that x is only evaluated once.

Compound assignment is supported by arithmetic , Boolean logical , and bitwise logical and shift operators.

Null-coalescing assignment

You can use the null-coalescing assignment operator ??= to assign the value of its right-hand operand to its left-hand operand only if the left-hand operand evaluates to null . For more information, see the ?? and ??= operators article.

Operator overloadability

A user-defined type can't overload the assignment operator. However, a user-defined type can define an implicit conversion to another type. That way, the value of a user-defined type can be assigned to a variable, a property, or an indexer element of another type. For more information, see User-defined conversion operators .

A user-defined type can't explicitly overload a compound assignment operator. However, if a user-defined type overloads a binary operator op , the op= operator, if it exists, is also implicitly overloaded.

C# language specification

For more information, see the Assignment operators section of the C# language specification .

• C# operators and expressions
• ref keyword
• Use compound assignment (style rules IDE0054 and IDE0074)

Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback .

Submit and view feedback for

Additional resources

Python Tutorial

File handling, python modules, python numpy, python pandas, python matplotlib, python scipy, machine learning, python mysql, python mongodb, python reference, module reference, python how to, python examples, python assignment operators.

Assignment operators are used to assign values to variables:

Related Pages

COLOR PICKER

Contact Sales

If you want to use W3Schools services as an educational institution, team or enterprise, send us an e-mail: [email protected]

Report Error

If you want to report an error, or if you want to make a suggestion, send us an e-mail: [email protected]

Top Tutorials

Top references, top examples, get certified.

Python Operators: Arithmetic, Assignment, Comparison, Logical, Identity, Membership, Bitwise

Operators are special symbols that perform some operation on operands and returns the result. For example, 5 + 6 is an expression where + is an operator that performs arithmetic add operation on numeric left operand 5 and the right side operand 6 and returns a sum of two operands as a result.

Python includes the operator module that includes underlying methods for each operator. For example, the + operator calls the operator.add(a,b) method.

Above, expression 5 + 6 is equivalent to the expression operator.add(5, 6) and operator.__add__(5, 6) . Many function names are those used for special methods, without the double underscores (dunder methods). For backward compatibility, many of these have functions with the double underscores kept.

Python includes the following categories of operators:

Arithmetic Operators

Assignment operators, comparison operators, logical operators, identity operators, membership test operators, bitwise operators.

Arithmetic operators perform the common mathematical operation on the numeric operands.

The arithmetic operators return the type of result depends on the type of operands, as below.

• If either operand is a complex number, the result is converted to complex;
• If either operand is a floating point number, the result is converted to floating point;
• If both operands are integers, then the result is an integer and no conversion is needed.

The following table lists all the arithmetic operators in Python:

The assignment operators are used to assign values to variables. The following table lists all the arithmetic operators in Python:

The comparison operators compare two operands and return a boolean either True or False. The following table lists comparison operators in Python.

The logical operators are used to combine two boolean expressions. The logical operations are generally applicable to all objects, and support truth tests, identity tests, and boolean operations.

The identity operators check whether the two objects have the same id value e.i. both the objects point to the same memory location.

The membership test operators in and not in test whether the sequence has a given item or not. For the string and bytes types, x in y is True if and only if x is a substring of y .

Bitwise operators perform operations on binary operands.

• Compare strings in Python
• Convert file data to list
• Convert User Input to a Number
• Convert String to Datetime in Python
• How to call external commands in Python?
• How to count the occurrences of a list item?
• How to flatten list in Python?
• How to merge dictionaries in Python?
• How to pass value by reference in Python?
• Remove duplicate items from list in Python
• More Python articles

We are a team of passionate developers, educators, and technology enthusiasts who, with their combined expertise and experience, create in -depth, comprehensive, and easy to understand tutorials.We focus on a blend of theoretical explanations and practical examples to encourages hands - on learning. Visit About Us page for more information.

• Python Questions & Answers
• Python Skill Test
• Python Latest Articles

Firefox is no longer supported on Windows 8.1 and below.

Please download Firefox ESR (Extended Support Release) to use Firefox.

Download Firefox ESR 64-bit

Download Firefox ESR 32-bit

Firefox is no longer supported on macOS 10.14 and below.

Mozilla Foundation Security Advisory 2024-18

Security vulnerabilities fixed in firefox 125.

• Firefox 125

# CVE-2024-3852: GetBoundName in the JIT returned the wrong object

Description.

GetBoundName could return the wrong version of an object when JIT optimizations were applied.

• Bug 1883542

# CVE-2024-3853: Use-after-free if garbage collection runs during realm initialization

A use-after-free could result if a JavaScript realm was in the process of being initialized when a garbage collection started.

• Bug 1884427

# CVE-2024-3854: Out-of-bounds-read after mis-optimized switch statement

In some code patterns the JIT incorrectly optimized switch statements and generated code with out-of-bounds-reads.

• Bug 1884552

# CVE-2024-3855: Incorrect JIT optimization of MSubstr leads to out-of-bounds reads

In certain cases the JIT incorrectly optimized MSubstr operations, which led to out-of-bounds reads.

• Bug 1885828

# CVE-2024-3856: Use-after-free in WASM garbage collection

A use-after-free could occur during WASM execution if garbage collection ran during the creation of an array.

• Bug 1885829

# CVE-2024-3857: Incorrect JITting of arguments led to use-after-free during garbage collection

The JIT created incorrect code for arguments in certain cases. This led to potential use-after-free crashes during garbage collection.

• Bug 1886683

# CVE-2024-3858: Corrupt pointer dereference in js::CheckTracedThing<js::Shape>

It was possible to mutate a JavaScript object so that the JIT could crash while tracing it.

• Bug 1888892

# CVE-2024-3859: Integer-overflow led to out-of-bounds-read in the OpenType sanitizer

On 32-bit versions there were integer-overflows that led to an out-of-bounds-read that potentially could be triggered by a malformed OpenType font.

• Bug 1874489

# CVE-2024-3860: Crash when tracing empty shape lists

An out-of-memory condition during object initialization could result in an empty shape list. If the JIT subsequently traced the object it would crash.

• Bug 1881417

# CVE-2024-3861: Potential use-after-free due to AlignedBuffer self-move

If an AlignedBuffer were assigned to itself, the subsequent self-move could result in an incorrect reference count and later use-after-free.

• Bug 1883158

# CVE-2024-3862: Potential use of uninitialized memory in MarkStack assignment operator on self-assignment

The MarkStack assignment operator, part of the JavaScript engine, could access uninitialized memory if it were used in a self-assignment.

• Bug 1884457

# CVE-2024-3863: Download Protections were bypassed by .xrm-ms files on Windows

The executable file warning was not presented when downloading .xrm-ms files. Note: This issue only affected Windows operating systems. Other operating systems are unaffected.

• Bug 1885855

# CVE-2024-3302: Denial of Service using HTTP/2 CONTINUATION frames

There was no limit to the number of HTTP/2 CONTINUATION frames that would be processed. A server could abuse this to create an Out of Memory condition in the browser.

• Bug 1881183
• VU#421644 - HTTP/2 CONTINUATION frames can be utilized for DoS attacks

# CVE-2024-3864: Memory safety bug fixed in Firefox 125, Firefox ESR 115.10, and Thunderbird 115.10

Memory safety bug present in Firefox 124, Firefox ESR 115.9, and Thunderbird 115.9. This bug showed evidence of memory corruption and we presume that with enough effort this could have been exploited to run arbitrary code.

• Memory safety bug fixed in Firefox 125, Firefox ESR 115.10, and Thunderbird 115.10

# CVE-2024-3865: Memory safety bugs fixed in Firefox 125

Memory safety bugs present in Firefox 124. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code.

• Memory safety bugs fixed in Firefox 125

• C++ Data Types
• C++ Input/Output
• C++ Pointers
• C++ Interview Questions
• C++ Programs
• C++ Cheatsheet
• C++ Projects
• C++ Exception Handling
• C++ Memory Management

C++ Assignment Operator Overloading

• Operator Overloading in C++
• Assignment Operators in Programming
• Operator Overloading in MATLAB
• C++ Bitwise Operator Overloading
• Solidity - Assignment Operators
• Operator Overloading in Julia
• Operator Overloading in Ruby
• Operator Overloading in Python
• C++ Logical (&&, ||, !) Operator Overloading
• Assignment Operators In C++
• Types of Operator Overloading in C++
• Assignment Operators in C
• Overloading New and Delete operator in c++
• Increment (++) and Decrement (--) Operator Overloading in C++
• C++ | Operator Overloading | Question 3
• C++ | Operator Overloading | Question 9
• C++ | Operator Overloading | Question 7
• C++ | Operator Overloading | Question 2
• C++ | Operator Overloading | Question 6
• Vector in C++ STL
• Initialize a vector in C++ (7 different ways)
• Map in C++ Standard Template Library (STL)
• std::sort() in C++ STL
• Inheritance in C++
• The C++ Standard Template Library (STL)
• Object Oriented Programming in C++
• C++ Classes and Objects
• Virtual Function in C++
• Set in C++ Standard Template Library (STL)

Prerequisite: Operator Overloading

The assignment operator,”=”, is the operator used for Assignment. It copies the right value into the left value. Assignment Operators are predefined to operate only on built-in Data types.

• Assignment operator overloading is binary operator overloading.
• Overloading assignment operator in C++ copies all values of one object to another object.
• Only a non-static member function should be used to overload the assignment operator.

We can’t directly use the Assignment Operator on objects. The simple explanation for this is that the Assignment Operator is predefined to operate only on built-in Data types. As the class and objects are user-defined data types, so the compiler generates an error.

here, a and b are of type integer, which is a built-in data type. Assignment Operator can be used directly on built-in data types.

c1 and c2 are variables of type “class C”. Here compiler will generate an error as we are trying to use an Assignment Operator on user-defined data types.

The above example can be done by implementing methods or functions inside the class, but we choose operator overloading instead. The reason for this is, operator overloading gives the functionality to use the operator directly which makes code easy to understand, and even code size decreases because of it. Also, operator overloading does not affect the normal working of the operator but provides extra functionality to it.

Now, if the user wants to use the assignment operator “=” to assign the value of the class variable to another class variable then the user has to redefine the meaning of the assignment operator “=”.  Redefining the meaning of operators really does not change their original meaning, instead, they have been given additional meaning along with their existing ones.

Please Login to comment...

Similar reads.

• cpp-operator
• cpp-operator-overloading

Improve your Coding Skills with Practice

What kind of Experience do you want to share?