what is an assignment pdf

Understanding Assignments

What this handout is about.

The first step in any successful college writing venture is reading the assignment. While this sounds like a simple task, it can be a tough one. This handout will help you unravel your assignment and begin to craft an effective response. Much of the following advice will involve translating typical assignment terms and practices into meaningful clues to the type of writing your instructor expects. See our short video for more tips.

Basic beginnings

Regardless of the assignment, department, or instructor, adopting these two habits will serve you well :

• Read the assignment carefully as soon as you receive it. Do not put this task off—reading the assignment at the beginning will save you time, stress, and problems later. An assignment can look pretty straightforward at first, particularly if the instructor has provided lots of information. That does not mean it will not take time and effort to complete; you may even have to learn a new skill to complete the assignment.
• Ask the instructor about anything you do not understand. Do not hesitate to approach your instructor. Instructors would prefer to set you straight before you hand the paper in. That’s also when you will find their feedback most useful.

Assignment formats

Many assignments follow a basic format. Assignments often begin with an overview of the topic, include a central verb or verbs that describe the task, and offer some additional suggestions, questions, or prompts to get you started.

An Overview of Some Kind

The instructor might set the stage with some general discussion of the subject of the assignment, introduce the topic, or remind you of something pertinent that you have discussed in class. For example:

“Throughout history, gerbils have played a key role in politics,” or “In the last few weeks of class, we have focused on the evening wear of the housefly …”

The Task of the Assignment

Pay attention; this part tells you what to do when you write the paper. Look for the key verb or verbs in the sentence. Words like analyze, summarize, or compare direct you to think about your topic in a certain way. Also pay attention to words such as how, what, when, where, and why; these words guide your attention toward specific information. (See the section in this handout titled “Key Terms” for more information.)

“Analyze the effect that gerbils had on the Russian Revolution”, or “Suggest an interpretation of housefly undergarments that differs from Darwin’s.”

Additional Material to Think about

Here you will find some questions to use as springboards as you begin to think about the topic. Instructors usually include these questions as suggestions rather than requirements. Do not feel compelled to answer every question unless the instructor asks you to do so. Pay attention to the order of the questions. Sometimes they suggest the thinking process your instructor imagines you will need to follow to begin thinking about the topic.

“You may wish to consider the differing views held by Communist gerbils vs. Monarchist gerbils, or Can there be such a thing as ‘the housefly garment industry’ or is it just a home-based craft?”

These are the instructor’s comments about writing expectations:

“Be concise”, “Write effectively”, or “Argue furiously.”

Technical Details

These instructions usually indicate format rules or guidelines.

“Your paper must be typed in Palatino font on gray paper and must not exceed 600 pages. It is due on the anniversary of Mao Tse-tung’s death.”

The assignment’s parts may not appear in exactly this order, and each part may be very long or really short. Nonetheless, being aware of this standard pattern can help you understand what your instructor wants you to do.

Interpreting the assignment

Ask yourself a few basic questions as you read and jot down the answers on the assignment sheet:

Why did your instructor ask you to do this particular task?

Who is your audience.

• What kind of evidence do you need to support your ideas?

What kind of writing style is acceptable?

• What are the absolute rules of the paper?

Try to look at the question from the point of view of the instructor. Recognize that your instructor has a reason for giving you this assignment and for giving it to you at a particular point in the semester. In every assignment, the instructor has a challenge for you. This challenge could be anything from demonstrating an ability to think clearly to demonstrating an ability to use the library. See the assignment not as a vague suggestion of what to do but as an opportunity to show that you can handle the course material as directed. Paper assignments give you more than a topic to discuss—they ask you to do something with the topic. Keep reminding yourself of that. Be careful to avoid the other extreme as well: do not read more into the assignment than what is there.

Of course, your instructor has given you an assignment so that they will be able to assess your understanding of the course material and give you an appropriate grade. But there is more to it than that. Your instructor has tried to design a learning experience of some kind. Your instructor wants you to think about something in a particular way for a particular reason. If you read the course description at the beginning of your syllabus, review the assigned readings, and consider the assignment itself, you may begin to see the plan, purpose, or approach to the subject matter that your instructor has created for you. If you still aren’t sure of the assignment’s goals, try asking the instructor. For help with this, see our handout on getting feedback .

Given your instructor’s efforts, it helps to answer the question: What is my purpose in completing this assignment? Is it to gather research from a variety of outside sources and present a coherent picture? Is it to take material I have been learning in class and apply it to a new situation? Is it to prove a point one way or another? Key words from the assignment can help you figure this out. Look for key terms in the form of active verbs that tell you what to do.

Key Terms: Finding Those Active Verbs

Here are some common key words and definitions to help you think about assignment terms:

Information words Ask you to demonstrate what you know about the subject, such as who, what, when, where, how, and why.

• define —give the subject’s meaning (according to someone or something). Sometimes you have to give more than one view on the subject’s meaning
• describe —provide details about the subject by answering question words (such as who, what, when, where, how, and why); you might also give details related to the five senses (what you see, hear, feel, taste, and smell)
• explain —give reasons why or examples of how something happened
• illustrate —give descriptive examples of the subject and show how each is connected with the subject
• summarize —briefly list the important ideas you learned about the subject
• trace —outline how something has changed or developed from an earlier time to its current form
• research —gather material from outside sources about the subject, often with the implication or requirement that you will analyze what you have found

Relation words Ask you to demonstrate how things are connected.

• compare —show how two or more things are similar (and, sometimes, different)
• contrast —show how two or more things are dissimilar
• apply—use details that you’ve been given to demonstrate how an idea, theory, or concept works in a particular situation
• cause —show how one event or series of events made something else happen
• relate —show or describe the connections between things

Interpretation words Ask you to defend ideas of your own about the subject. Do not see these words as requesting opinion alone (unless the assignment specifically says so), but as requiring opinion that is supported by concrete evidence. Remember examples, principles, definitions, or concepts from class or research and use them in your interpretation.

• assess —summarize your opinion of the subject and measure it against something
• prove, justify —give reasons or examples to demonstrate how or why something is the truth
• evaluate, respond —state your opinion of the subject as good, bad, or some combination of the two, with examples and reasons
• support —give reasons or evidence for something you believe (be sure to state clearly what it is that you believe)
• synthesize —put two or more things together that have not been put together in class or in your readings before; do not just summarize one and then the other and say that they are similar or different—you must provide a reason for putting them together that runs all the way through the paper
• analyze —determine how individual parts create or relate to the whole, figure out how something works, what it might mean, or why it is important
• argue —take a side and defend it with evidence against the other side

More Clues to Your Purpose As you read the assignment, think about what the teacher does in class:

• What kinds of textbooks or coursepack did your instructor choose for the course—ones that provide background information, explain theories or perspectives, or argue a point of view?
• In lecture, does your instructor ask your opinion, try to prove their point of view, or use keywords that show up again in the assignment?
• What kinds of assignments are typical in this discipline? Social science classes often expect more research. Humanities classes thrive on interpretation and analysis.
• How do the assignments, readings, and lectures work together in the course? Instructors spend time designing courses, sometimes even arguing with their peers about the most effective course materials. Figuring out the overall design to the course will help you understand what each assignment is meant to achieve.

Now, what about your reader? Most undergraduates think of their audience as the instructor. True, your instructor is a good person to keep in mind as you write. But for the purposes of a good paper, think of your audience as someone like your roommate: smart enough to understand a clear, logical argument, but not someone who already knows exactly what is going on in your particular paper. Remember, even if the instructor knows everything there is to know about your paper topic, they still have to read your paper and assess your understanding. In other words, teach the material to your reader.

Aiming a paper at your audience happens in two ways: you make decisions about the tone and the level of information you want to convey.

• Tone means the “voice” of your paper. Should you be chatty, formal, or objective? Usually you will find some happy medium—you do not want to alienate your reader by sounding condescending or superior, but you do not want to, um, like, totally wig on the man, you know? Eschew ostentatious erudition: some students think the way to sound academic is to use big words. Be careful—you can sound ridiculous, especially if you use the wrong big words.
• The level of information you use depends on who you think your audience is. If you imagine your audience as your instructor and they already know everything you have to say, you may find yourself leaving out key information that can cause your argument to be unconvincing and illogical. But you do not have to explain every single word or issue. If you are telling your roommate what happened on your favorite science fiction TV show last night, you do not say, “First a dark-haired white man of average height, wearing a suit and carrying a flashlight, walked into the room. Then a purple alien with fifteen arms and at least three eyes turned around. Then the man smiled slightly. In the background, you could hear a clock ticking. The room was fairly dark and had at least two windows that I saw.” You also do not say, “This guy found some aliens. The end.” Find some balance of useful details that support your main point.

You’ll find a much more detailed discussion of these concepts in our handout on audience .

The Grim Truth

With a few exceptions (including some lab and ethnography reports), you are probably being asked to make an argument. You must convince your audience. It is easy to forget this aim when you are researching and writing; as you become involved in your subject matter, you may become enmeshed in the details and focus on learning or simply telling the information you have found. You need to do more than just repeat what you have read. Your writing should have a point, and you should be able to say it in a sentence. Sometimes instructors call this sentence a “thesis” or a “claim.”

So, if your instructor tells you to write about some aspect of oral hygiene, you do not want to just list: “First, you brush your teeth with a soft brush and some peanut butter. Then, you floss with unwaxed, bologna-flavored string. Finally, gargle with bourbon.” Instead, you could say, “Of all the oral cleaning methods, sandblasting removes the most plaque. Therefore it should be recommended by the American Dental Association.” Or, “From an aesthetic perspective, moldy teeth can be quite charming. However, their joys are short-lived.”

Convincing the reader of your argument is the goal of academic writing. It doesn’t have to say “argument” anywhere in the assignment for you to need one. Look at the assignment and think about what kind of argument you could make about it instead of just seeing it as a checklist of information you have to present. For help with understanding the role of argument in academic writing, see our handout on argument .

What kind of evidence do you need?

There are many kinds of evidence, and what type of evidence will work for your assignment can depend on several factors–the discipline, the parameters of the assignment, and your instructor’s preference. Should you use statistics? Historical examples? Do you need to conduct your own experiment? Can you rely on personal experience? See our handout on evidence for suggestions on how to use evidence appropriately.

Make sure you are clear about this part of the assignment, because your use of evidence will be crucial in writing a successful paper. You are not just learning how to argue; you are learning how to argue with specific types of materials and ideas. Ask your instructor what counts as acceptable evidence. You can also ask a librarian for help. No matter what kind of evidence you use, be sure to cite it correctly—see the UNC Libraries citation tutorial .

You cannot always tell from the assignment just what sort of writing style your instructor expects. The instructor may be really laid back in class but still expect you to sound formal in writing. Or the instructor may be fairly formal in class and ask you to write a reflection paper where you need to use “I” and speak from your own experience.

Try to avoid false associations of a particular field with a style (“art historians like wacky creativity,” or “political scientists are boring and just give facts”) and look instead to the types of readings you have been given in class. No one expects you to write like Plato—just use the readings as a guide for what is standard or preferable to your instructor. When in doubt, ask your instructor about the level of formality they expect.

No matter what field you are writing for or what facts you are including, if you do not write so that your reader can understand your main idea, you have wasted your time. So make clarity your main goal. For specific help with style, see our handout on style .

Technical details about the assignment

The technical information you are given in an assignment always seems like the easy part. This section can actually give you lots of little hints about approaching the task. Find out if elements such as page length and citation format (see the UNC Libraries citation tutorial ) are negotiable. Some professors do not have strong preferences as long as you are consistent and fully answer the assignment. Some professors are very specific and will deduct big points for deviations.

Usually, the page length tells you something important: The instructor thinks the size of the paper is appropriate to the assignment’s parameters. In plain English, your instructor is telling you how many pages it should take for you to answer the question as fully as you are expected to. So if an assignment is two pages long, you cannot pad your paper with examples or reword your main idea several times. Hit your one point early, defend it with the clearest example, and finish quickly. If an assignment is ten pages long, you can be more complex in your main points and examples—and if you can only produce five pages for that assignment, you need to see someone for help—as soon as possible.

Tricks that don’t work

Your instructors are not fooled when you:

• spend more time on the cover page than the essay —graphics, cool binders, and cute titles are no replacement for a well-written paper.
• use huge fonts, wide margins, or extra spacing to pad the page length —these tricks are immediately obvious to the eye. Most instructors use the same word processor you do. They know what’s possible. Such tactics are especially damning when the instructor has a stack of 60 papers to grade and yours is the only one that low-flying airplane pilots could read.
• use a paper from another class that covered “sort of similar” material . Again, the instructor has a particular task for you to fulfill in the assignment that usually relates to course material and lectures. Your other paper may not cover this material, and turning in the same paper for more than one course may constitute an Honor Code violation . Ask the instructor—it can’t hurt.
• get all wacky and “creative” before you answer the question . Showing that you are able to think beyond the boundaries of a simple assignment can be good, but you must do what the assignment calls for first. Again, check with your instructor. A humorous tone can be refreshing for someone grading a stack of papers, but it will not get you a good grade if you have not fulfilled the task.

Critical reading of assignments leads to skills in other types of reading and writing. If you get good at figuring out what the real goals of assignments are, you are going to be better at understanding the goals of all of your classes and fields of study.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

Creating Your Assignment Sheets

Main navigation.

In order to help our students best engage with the writing tasks we assign them, we need as a program  to scaffold the assignments with not only effectively designed activities, but equally effectively designed assignment sheets that clearly explain the learning objectives, purpose, and logistics for the assignment.

Checklist for Assignment Sheet Design

As a program, instructors should compose assignment sheets that contain the following elements.

A  clear description of the assignment and its purpose . How does this assignment contribute to their development as writers in this class, and perhaps beyond? What is the genre of the assignment? (e.g., some students will be familiar with rhetorical analysis, some will not).

Learning objectives for the assignment .  The learning objectives for each assignment are available on the TeachingWriting website. While you might include others objectives, or tweak the language of these a bit to fit with how you teach rhetoric, these objectives should appear in some form on the assignment sheet and should be echoed in your rubric.

Due dates or timeline, including dates for drafts .  This should include specific times and procedures for turning in drafts. You should also indicate dates for process assignments and peer review if they are different from the main assignment due dates.

Details about format (including word count, documentation form) .  This might also be a good place to remind them of any technical specifications (even if you noted them on the syllabus).

Discussion of steps of the process.  These might be “suggested” to avoid the implication that there is one best way to achieve a rhetorical analysis.

Evaluation criteria / grading rubric that is in alignment with learning objectives .  While the general  PWR evaluation criteria  is a good starting place, it is best to customize your rubric to the specific purposes of your assignment, ideally incorporating some of the language from the learning goals. In keeping with PWR’s elevation of rhetoric over rules, it’s generally best to avoid rubrics that assign specific numbers of points to specific features of the text since that suggests a fairly narrow range of good choices for students’ rhetorical goals. (This is not to say that points shouldn’t be used: it’s just more in the spirit of PWR’s rhetorical commitments to use them holistically.)

Canvas Versions of Assignment Sheets

Canvas offers an "assignment" function you can use to share assignment sheet information with students.  It provides you with the opportunity to upload a rubric in conjunction with assignment details; to create an upload space for student work (so they can upload assignments directly to Canvas); to link the assignment submissions to Speedgrader, Canvas's internal grading platform; and to sync your assigned grades with the gradebook.  While these are very helpful features, don't hesitate to reach out to the Canvas Help team or our ATS for support when you set them up for the first time. In addition, you should always provide students with access to a separate PDF assignment sheet. Don't just embed the information in the Canvas assignment field; if students have trouble accessing Canvas for any reason (Canvas outage; tech issues), they won't be able to access that information.

In addition, you might creating video mini-overviews or "talk-throughs" of your assignments.  These should serve as supplements to the assignment sheets, not as a replacement for them.

Sample Assignment Sheets

Check out some examples of Stanford instructors' assignment sheets via the links below. Note that these links will route you to our Canvas PWR Program Materials site, so you must have access to the Canvas page in order to view these files: 

See examples of rhetorical analysis assignment sheets

See examples of texts in conversation assignment sheets

See examples of research-based argument assignment sheets

Further reading on assignment sheets

Create a PDF of your assignment or solution set

Updated 21 Feb 2024

If your assignment isn’t a PDF document yet, convert it to PDF format so you can upload it into a Freehand Grader (Beta) assignment. To share the correct answers with students, you can also optionally upload a solution set PDF for the assignment.

• If none of the PDF conversion methods below apply to your situation, search online for alternate instructions that do apply.
• Students use a scanner app on their phone or tablet to create a PDF of their assignment work done on paper. Student instructions for scan-to-PDF steps

Select a device for instructions to save your Word document to PDF.

• Open the document in Microsoft Word.
• Windows: Select File then Save As Adobe PDF or Save As then PDF . MacOS: Select File , Save As , then select PDF  from the Format list.
• Identify the location for the PDF.
• Select Save .
• Open the Word document.
• Select the 3-dot menu (top right).
• Choose Print and Select a printer .
• Select Save as PDF and then choose the Save as PDF round button.
• Select the Action menu (bottom left).
• Choose Convert to PDF .
• To view your PDF, select Go to File .

Select a device for instructions to save your Google doc to PDF.

• Open the document in Google Docs.
• Select File then Download .
• Select PDF.
• Open the document you want in the Google Docs app.
• Choose Share and export .
• Select Save as to save to your phone, or select Send a copy .
• Choose PDF for the format, then OK .
• Select Share & export then Send a copy .
• Send the PDF document to yourself or select Save to files to save on your iPhone.

After you create your PDF, make sure it's accessible to all students before you upload it to the Freehand Grader.

See also: Freehand Grader overview | Create Freehand Grader assignment | Student Help for Freehand Grader

• Skip to primary navigation
• Skip to main content
• Skip to primary sidebar
• Skip to footer

Legal Templates

Home Business Assignment Agreement

Assignment Agreement Template

Use our assignment agreement to transfer contractual obligations.

Updated February 1, 2024 Reviewed by Brooke Davis

An assignment agreement is a legal document that transfers rights, responsibilities, and benefits from one party (the “assignor”) to another (the “assignee”). You can use it to reassign debt, real estate, intellectual property, leases, insurance policies, and government contracts.

What Is an Assignment Agreement?

What to include in an assignment agreement, how to assign a contract, how to write an assignment agreement, assignment agreement sample.

Partnership Interest

An assignment agreement effectively transfers the rights and obligations of a person or entity under an initial contract to another. The original party is the assignor, and the assignee takes on the contract’s duties and benefits.

It’s often a requirement to let the other party in the original deal know the contract is being transferred. It’s essential to create this form thoughtfully, as a poorly written assignment agreement may leave the assignor obligated to certain aspects of the deal.

The most common use of an assignment agreement occurs when the assignor no longer can or wants to continue with a contract. Instead of leaving the initial party or breaking the agreement, the assignor can transfer the contract to another individual or entity.

For example, imagine a small residential trash collection service plans to close its operations. Before it closes, the business brokers a deal to send its accounts to a curbside pickup company providing similar services. After notifying account holders, the latter company continues the service while receiving payment.

Create a thorough assignment agreement by including the following information:

• Effective Date:  The document must indicate when the transfer of rights and obligations occurs.
• Parties:  Include the full name and address of the assignor, assignee, and obligor (if required).
• Assignment:  Provide details that identify the original contract being assigned.
• Third-Party Approval: If the initial contract requires the approval of the obligor, note the date the approval was received.
• Signatures:  Both parties must sign and date the printed assignment contract template once completed. If a notary is required, wait until you are in the presence of the official and present identification before signing. Failure to do so may result in having to redo the assignment contract.

Review the Contract Terms

Carefully review the terms of the existing contract. Some contracts may have specific provisions regarding assignment. Check for any restrictions or requirements related to assigning the contract.

Check for Anti-Assignment Clauses

Some contracts include anti-assignment clauses that prohibit or restrict the ability to assign the contract without the consent of the other party. If there’s such a clause, you may need the consent of the original parties to proceed.

Determine Assignability

Ensure that the contract is assignable. Some contracts, especially those involving personal services or unique skills, may not be assignable without the other party’s agreement.

Get Consent from the Other Party (if Required)

If the contract includes an anti-assignment clause or requires consent for assignment, seek written consent from the other party. This can often be done through a formal amendment to the contract.

Prepare an Assignment Agreement

Draft an assignment agreement that clearly outlines the transfer of rights and obligations from the assignor (the party assigning the contract) to the assignee (the party receiving the assignment). Include details such as the names of the parties, the effective date of the assignment, and the specific rights and obligations being transferred.

Include Original Contract Information

Attach a copy of the original contract or reference its key terms in the assignment agreement. This helps in clearly identifying the contract being assigned.

Execution of the Assignment Agreement

Both the assignor and assignee should sign the assignment agreement. Signatures should be notarized if required by the contract or local laws.

Notice to the Other Party

Provide notice of the assignment to the non-assigning party. This can be done formally through a letter or as specified in the contract.

File the Assignment

File the assignment agreement with the appropriate parties or entities as required. This may include filing with the original contracting party or relevant government authorities.

Communicate with Third Parties

Inform any relevant third parties, such as suppliers, customers, or service providers, about the assignment to ensure a smooth transition.

Keep Copies for Records

Keep copies of the assignment agreement, original contract, and any related communications for your records.

Here’s a list of steps on how to write an assignment agreement:

Step 1 – List the Assignor’s and Assignee’s Details

List all of the pertinent information regarding the parties involved in the transfer. This information includes their full names, addresses, phone numbers, and other relevant contact information.

This step clarifies who’s transferring the initial contract and who will take on its responsibilities.

Step 2 – Provide Original Contract Information

Describing and identifying the contract that is effectively being reassigned is essential. This step avoids any confusion after the transfer has been completed.

Step 3 – State the Consideration

Provide accurate information regarding the amount the assignee pays to assume the contract. This figure should include taxes and any relevant peripheral expenses. If the assignee will pay the consideration over a period, indicate the method and installments.

Step 4 – Provide Any Terms and Conditions

The terms and conditions of any agreement are crucial to a smooth transaction. You must cover issues such as dispute resolution, governing law, obligor approval, and any relevant clauses.

Step 5 – Obtain Signatures

Both parties must sign the agreement to ensure it is legally binding and that they have read and understood the contract. If a notary is required, wait to sign off in their presence.

Related Documents

• Purchase Agreement : Outlines the terms and conditions of an item sale.
• Business Contract : An agreement in which each party agrees to an exchange, typically involving money, goods, or services.
• Lease/Rental Agreement : A lease agreement is a written document that officially recognizes a legally binding relationship between two parties -- a landlord and a tenant.
• Legal Resources
• Partner With Us
• Terms of Use
• Privacy Policy
• Do Not Sell My Personal Information

The document above is a sample. Please note that the language you see here may change depending on your answers to the document questionnaire.

Thank you for downloading!

How would you rate your free template?

Click on a star to rate

Browse Course Material

Course info.

• Dr. Casey Rodriguez

Departments

• Mathematics

As Taught In

• Mathematical Analysis

Learning Resource Types

Real analysis, assignment 1 (pdf).

You are leaving MIT OpenCourseWare

Academia.edu no longer supports Internet Explorer.

To browse Academia.edu and the wider internet faster and more securely, please take a few seconds to  upgrade your browser .

Enter the email address you signed up with and we'll email you a reset link.

• We're Hiring!
• Help Center

Project Management Assignment - Improvement Project

Related Papers

kgomotso mosese

Igor Kononenko

kushal shah

Karthik D Netalkar

Catalina Soare

IJESRT Journal

Theory of constraints (TOC) is about thinking in logical and systematic way similar to the Plan do check act (PDCA) learning loop. It is not only about analyzing the causes and effect but also verifying basic assumptions, exploring alternatives and process improvement. The goal of TOC is to maximize the efficiency, profitability, quality of work. This paper includes basic theoretical information about TOC. It basically helps in problem solving & implementing the solution for the same. TOC is majorly applied in manufacturing sector, including distribution, marketing, project management, and accounting. In short, any situation involving change to a system TOC is applied

Tim Kwapong

Industrial Project Management

Adedeji Badiru

Daniel Gómez Galiano

RELATED PAPERS

JasaCetak AmplopCepat

Robin Støckert

Animal Biodiversity and Conservation

Raimundo Real Giménez

L'Académie de Lausanne entre Humanisme et Réforme (ca. 1537-1560)

Vincent lemire

ACS Applied Materials & Interfaces

Daniel Mandler

Andri Eka Saputra

Thiago Barbosa Soares

Current History

Christina Fink

Boletín Museo del Oro

Catalina Bateman

Mundi Rahayu

Journal of the Acoustical Society of Japan (E)

Riichiro Mizoguchi

chandan mohanty

Human Service Organizations Management, Leadership & Governance

Catherine Giunta

Teresa Dobrzyńska

Proceedings of the International Conference on Health and Medical Sciences (AHMS 2020)

melati astuti

Journal of Agricultural & Environmental Ethics

Fred Gifford

•   We're Hiring!
•   Help Center
• Find new research papers in:
• Health Sciences
• Earth Sciences
• Cognitive Science
• Mathematics
• Computer Science
• Academia ©2024